Kinesin walks hand-over-hand

Kinesin is a processive motor that takes 8.3-nm center-of-mass steps along microtubules for each adenosine triphosphate hydrolyzed. Whether kinesin moves by a "hand-over-hand" or an "inchworm" model has been controversial. We have labeled a single head of the kinesin dimer with a Cy3 fluorophore and localized the position of the dye to within 2 nm before and after a step. We observed that single kinesin heads take steps of 17.3 +/- 3.3 nm. A kinetic analysis of the dwell times between steps shows that the 17-nm steps alternate with 0-nm steps. These results strongly support a hand-over-hand mechanism, and not an inchworm mechanism. In addition, our results suggest that kinesin is bound by both heads to the microtubule while it waits for adenosine triphosphate in between steps.     

Distinguishing inchworm and hand-over-hand processive kinesin movement by neck rotation measurements

The motor enzyme kinesin makes hundreds of unidirectional 8-nanometer steps without detaching from or freely sliding along the microtubule on which it moves. We investigated the kinesin stepping mechanism by immobilizing a Drosophila kinesin derivative through the carboxyl-terminal end of the neck coiled-coil domain and measuring orientations of microtubules moved by single enzyme molecules at submicromolar adenosine triphosphate concentrations. The kinesin-mediated microtubule-surface linkage was sufficiently torsionally stiff (>/=2.0 +/- 0.9 x 10(-20) Newton meters per radian2) that stepping by the hypothesized symmetric hand-over-hand mechanism would produce 180 degree rotations of the microtubule relative to the immobilized kinesin neck. In fact, there were no rotations, a finding that is inconsistent with symmetric hand-over-hand movement. An alternative "inchworm" mechanism is consistent with our experimental results.     

Myosin V walks hand-over-hand: single fluorophore imaging with 1.5-nm localization

Myosin V is a dimeric molecular motor that moves processively on actin, with the center of mass moving approximately 37 nanometers for each adenosine triphosphate hydrolyzed. We have labeled myosin V with a single fluorophore at different positions in the light-chain domain and measured the step size with a standard deviation of <1.5 nanometers, with 0.5-second temporal resolution, and observation times of minutes. The step size alternates between 37 + 2x nm and 37 - 2x, where x is the distance along the direction of motion between the dye and the midpoint between the two heads. These results strongly support a hand-over-hand model of motility, not an inchworm model.     

Nucleotide-dependent single- to double-headed binding of kinesin

The motility of kinesin motors is explained by a "hand-over-hand" model in which two heads of kinesin alternately repeat single-headed and double-headed binding with a microtubule. To investigate the binding mode of kinesin at the key nucleotide states during adenosine 5'-triphosphate (ATP) hydrolysis, we measured the mechanical properties of a single kinesin-microtubule complex by applying an external load with optical tweezers. Both the unbinding force and the elastic modulus in solutions containing AMP-PNP (an ATP analog) were twice the value of those in nucleotide-free solution or in the presence of both AMP-PNP and adenosine 5'-diphosphate. Thus, kinesin binds through two heads in the former and one head in the latter two states, which supports a major prediction of the hand-over-hand model.     

Cytoplasmic dynein moves through uncoordinated stepping of the AAA+ ring domains

Cytoplasmic dynein is a homodimeric AAA+ motor that transports a multitude of cargos toward the microtubule minus end. How the two catalytic head domains interact and move relative to each other during processive movement is unclear. Here, we tracked the relative positions of both heads with nanometer precision and directly observed the heads moving independently along the microtubule. The heads remained widely separated, and their stepping behavior varied as a function of interhead separation. One active head was sufficient for processive movement, and an active head could drag an inactive partner head forward. Thus, dynein moves processively without interhead coordination, a mechanism fundamentally distinct from the hand-over-hand stepping of kinesin and myosin.     

A processive single-headed motor: kinesin superfamily protein KIF1A

A single kinesin molecule can move "processively" along a microtubule for more than 1 micrometer before detaching from it. The prevailing explanation for this processive movement is the "walking model," which envisions that each of two motor domains (heads) of the kinesin molecule binds coordinately to the microtubule. This implies that each kinesin molecule must have two heads to "walk" and that a single-headed kinesin could not move processively. Here, a motor-domain construct of KIF1A, a single-headed kinesin superfamily protein, was shown to move processively along the microtubule for more than 1 micrometer. The movement along the microtubules was stochastic and fitted a biased Brownian-movement model.     

Myosin V walks by lever action and Brownian motion

Myosin V is a molecular motor that moves cargo along actin filaments. Its two heads, each attached to a long and relatively stiff neck, move alternately forward in a "hand-over-hand" fashion. To observe under a microscope how the necks move, we attached a micrometer-sized rod to one of the necks. The leading neck swings unidirectionally forward, whereas the trailing neck, once lifted, undergoes extensive Brownian rotation in all directions before landing on a site ahead of the leading head. The neck-neck joint is essentially free, and the neck motion supports a mechanism where the active swing of the leading neck biases the random motion of the lifted head to let it eventually land on a forward site.     

Evidence that the head of kinesin is sufficient for force generation and motility in vitro

Kinesin is a mechanochemical protein that converts the chemical energy in adenosine triphosphate into mechanical force for movement of cellular components along microtubules. The regions of the kinesin molecule responsible for generating movement were determined by studying the heavy chain of Drosophila kinesin, and its truncated forms, expressed in Escherichia coli. The results demonstrate that (i) kinesin heavy chain alone, without the light chains and other eukaryotic factors, is able to induce microtubule movement in vitro, and (ii) a fragment likely to contain only the kinesin head is also capable of inducing microtubule motility. Thus, the amino-terminal 450 amino acids of kinesin contain all the basic elements needed to convert chemical energy into mechanical force.     

Differential regulation of dynein and kinesin motor proteins by tau

Dynein and kinesin motor proteins transport cellular cargoes toward opposite ends of microtubule tracks. In neurons, microtubules are abundantly decorated with microtubule-associated proteins (MAPs) such as tau. Motor proteins thus encounter MAPs frequently along their path. To determine the effects of tau on dynein and kinesin motility, we conducted single-molecule studies of motor proteins moving along tau-decorated microtubules. Dynein tended to reverse direction, whereas kinesin tended to detach at patches of bound tau. Kinesin was inhibited at about a tenth of the tau concentration that inhibited dynein, and the microtubule-binding domain of tau was sufficient to inhibit motor activity. The differential modulation of dynein and kinesin motility suggests that MAPs can spatially regulate the balance of microtubule-dependent axonal transport.     

A molecule carrier

We found that anthraquinone diffuses along a straight line across a flat, highly symmetric Cu111 surface. It can also reversibly attach one or two CO2 molecules as "cargo" and act as a "molecule carrier," thereby transforming the diffusive behavior of the CO2 molecules from isotropic to linear. Density functional theory calculations indicated a substrate-mediated attraction of approximately 0.12 electron volt (eV). Scanning tunneling microscopy revealed individual steps of the molecular complex on its diffusion pathway, with increases of approximately 0.03 and approximately 0.02 eV in the diffusion barrier upon attachment of the first and second CO2 molecule, respectively.     

KIF1A alternately uses two loops to bind microtubules

The motor protein kinesin moves along microtubules, driven by adenosine triphosphate (ATP) hydrolysis. However, it remains unclear how kinesin converts the chemical energy into mechanical movement. We report crystal structures of monomeric kinesin KIF1A with three transition-state analogs: adenylyl imidodiphosphate (AMP-PNP), adenosine diphosphate (ADP)-vanadate, and ADP-AlFx (aluminofluoride complexes). These structures, together with known structures of the ADP-bound state and the adenylyl-(beta,gamma-methylene) diphosphate (AMP-PCP)-bound state, show that kinesin uses two microtubule-binding loops in an alternating manner to change its interaction with microtubules during the ATP hydrolysis cycle; loop L11 is extended in the AMP-PNP structure, whereas loop L12 is extended in the ADP structure. ADP-vanadate displays an intermediate structure in which a conformational change in two switch regions causes both loops to be raised from the microtubule, thus actively detaching kinesin.     

Kinesin and dynein move a peroxisome in vivo: a tug-of-war or coordinated movement?

We used fluorescence imaging with one nanometer accuracy (FIONA) to analyze organelle movement by conventional kinesin and cytoplasmic dynein in a cell. We located a green fluorescence protein (GFP)-tagged peroxisome in cultured Drosophila S2 cells to within 1.5 nanometers in 1.1 milliseconds, a 400-fold improvement in temporal resolution, sufficient to determine the average step size to be approximately 8 nanometers for both dynein and kinesin. Furthermore, we found that dynein and kinesin do not work against each other in vivo during peroxisome transport. Rather, multiple kinesins or multiple dyneins work together, producing up to 10 times the in vitro speed.     

Atomic-scale dynamics of a two-dimensional gas-solid interface

The interface between a two-dimensional (2D) molecular gas and a 2D molecular solid has been imaged with a low-temperature, ultrahigh-vacuum scanning tunneling microscope. The solid consists of benzene molecules strongly bound to step edges on a Cu{111} surface. Benzene molecules on the Cu{111} terraces move freely as a 2D gas at 77 kelvin. Benzene molecules transiently occupy well-defined adsorption sites at the 1D edge of the 2D solid. Diffusion of molecules between these sites and exchange between the two phases at the interface are observed. On raised terraces of the copper surface, the 2D gas is held in a cage of the solid as in a 2D nanometer-scale gas bulb.     

Effects of molecular memory and bursting on fluctuations in gene expression

Many cellular components are present in such low numbers per cell that random births and deaths of individual molecules can cause substantial "noise" in concentrations. But biochemical events do not necessarily occur in single steps of individual molecules. Some processes are greatly randomized when synthesis or degradation occurs in large bursts of many molecules during a short time interval. Conversely, each birth or death of a macromolecule could involve several small steps, creating a memory between individual events. We present a generalized theory for stochastic gene expression, formulating the variance in protein abundance in terms of the randomness of the individual gene expression events. We show that common types of molecular mechanisms can produce gestation and senescence periods that reduce noise without requiring higher abundances, shorter lifetimes, or any concentration-dependent control loops. We also show that most single-cell experimental methods cannot distinguish between qualitatively different stochastic principles, although this in turn makes such methods better suited for identifying which components introduce fluctuations. Characterizing the random events that give rise to noise in concentrations instead requires dynamic measurements with single-molecule resolution.     

Untangling desmosomal knots with electron tomography

Cell adhesion by adherens junctions and desmosomes relies on interactions between cadherin molecules. However, the molecular interfaces that define molecular specificity and that mediate adhesion remain controversial. We used electron tomography of plastic sections from neonatal mouse skin to visualize the organization of desmosomes in situ. The resulting three-dimensional maps reveal individual cadherin molecules forming discrete groups and interacting through their tips. Fitting of an x-ray crystal structure for C-cadherin to these maps is consistent with a flexible intermolecular interface mediated by an exchange of amino-terminal tryptophans. This flexibility suggests a novel mechanism for generating both cis and trans interactions and for propagating these adhesive interactions along the junction.     

国槐尺蠖在河南省新乡市的发生规律与防治方法

病虫害防治在城市绿化养护管理工作中占有重要地位。国槐尺蠖在新乡的肆虐使城市绿化遭受较大影响。就国槐尺蠖的发生规律从生物学角度进行了调查研究,对国槐尺蠖的综合防治进行了分析研究,并提出了相应的对策。     

Conversion of Unc104/KIF1A kinesin into a processive motor after dimerization

Unc104/KIF1A belongs to a class of monomeric kinesin motors that have been thought to possess an unusual motility mechanism. Unlike the unidirectional motion driven by the coordinated actions of the two heads in conventional kinesins, single-headed KIF1A was reported to undergo biased diffusional motion along microtubules. Here, we show that Unc104/KIF1A can dimerize and move unidirectionally and processively with rapid velocities characteristic of transport in living cells. These results suggest that Unc104/KIF1A operates in vivo by a mechanism similar to conventional kinesin and that regulation of motor dimerization may be used to control transport by this class of kinesins.     

A function for kinesin I in the posterior transport of oskar mRNA and Staufen protein

The asymmetric localization of messenger RNA (mRNA) and protein determinants plays an important role in the establishment of complex body plans. In Drosophila oocytes, the anterior localization of bicoid mRNA and the posterior localization of oskar mRNA are key events in establishing the anterior-posterior axis. Although the mechanisms that drive bicoid and oskar localization have been elusive, oocyte microtubules are known to be essential. Here we report that the plus end-directed microtubule motor kinesin I is required for the posterior localization of oskar mRNA and an associated protein, Staufen, but not for the anterior-posterior localization of other asymmetric factors. Thus, a complex containing oskar mRNA and Staufen may be transported along microtubules to the posterior pole by kinesin I.     

Editing of CD1d-bound lipid antigens by endosomal lipid transfer proteins

It is now established that CD1 molecules present lipid antigens to T cells, although it is not clear how the exchange of lipids between membrane compartments and the CD1 binding groove is assisted. We report that mice deficient in prosaposin, the precursor to a family of endosomal lipid transfer proteins (LTP), exhibit specific defects in CD1d-mediated antigen presentation and lack Valpha14 NKT cells. In vitro, saposins extracted monomeric lipids from membranes and from CD1, thereby promoting the loading as well as the editing of lipids on CD1. Transient complexes between CD1, lipid, and LTP suggested a "tug-of-war" model in which lipid exchange between CD1 and LTP is on the basis of their respective affinities for lipids. LTPs constitute a previously unknown link between lipid metabolism and immunity and are likely to exert a profound influence on the repertoire of self, tumor, and microbial lipid antigens.