Identificaiton of a clubroot resistance locus conferring resistance to a Plasmodiophora brassicae classified into pathotype group 3 in Chinese cabbage (Brassica rapa L.)

In Chinese cabbage (Brassica rapa), the clubroot resistance (CR) genes Crr1 and Crr2 are effective against the mild Plasmodiophora brassicae isolate Ano-01 and the more virulent isolate Wakayama-01, but not against isolate No. 14, classified into pathotype group 3. ‘Akiriso’, a clubroot-resistant F₁ cultivar, showed resistance to isolate No. 14. To increase the durability of resistance, we attempted to identify the CR locus in ‘Akiriso’. CR in ‘Akiriso’ segregated as a single dominant gene and was linked to several molecular markers that were also linked to CRb, a CR locus from cultivar ‘CR Shinki’. We developed additional markers around CRb and constructed partial genetic maps of this region in ‘Akiriso’ and ‘CR Shinki’. The positions and order of markers in the genetic maps of the two cultivars were very similar. The segregation ratios for resistance to isolate No. 14 in F₂ populations derived from each of the two cultivars were also very similar. These results suggest that the CR locus in ‘Akiriso’ is CRb or a tightly linked locus. The newly developed markers in this study were more closely linked to CRb than previously reported markers and will be useful for marker-assisted selection of CRb in Chinese cabbage breeding.     

Development of EST-SSR markers and construction of a linkage map in faba bean (Vicia faba)

To develop a high density linkage map in faba bean, a total of 1,363 FBES (Faba bean expressed sequence tag [EST]-derived simple sequence repeat [SSR]) markers were designed based on 5,090 non-redundant ESTs developed in this study. A total of 109 plants of a ‘Nubaria 2’ × ‘Misr 3’ F₂ mapping population were used for map construction. Because the parents were not pure homozygous lines, the 109 F₂ plants were divided into three subpopulations according to the original F₁ plants. Linkage groups (LGs) generated in each subpopulation were integrated by commonly mapped markers. The integrated ‘Nubaria 2’ × ‘Misr 3’ map consisted of six LGs, representing a total length of 684.7 cM, with 552 loci. Of the mapped loci, 47% were generated from multi-loci diagnostic (MLD) markers. Alignment of homologous sequence pairs along each linkage group revealed obvious syntenic relationships between LGs in faba bean and the genomes of two model legumes, Lotus japonicus and Medicago truncatula. In a polymorphic analysis with ten Egyptian faba bean varieties, 78.9% (384/487) of the FBES markers showed polymorphisms. Along with the EST-SSR markers, the dense map developed in this study is expected to accelerate marker assisted breeding in faba bean.     

An SSR-based genetic map of pepper (Capsicum annuum L.) serves as an anchor for the alignment of major pepper maps

Of the Capsicum peppers (Capsicum spp.), cultivated C. annuum is the most commercially important, but has lacked an intraspecific linkage map based on sequence-specific PCR markers in accord with haploid chromosome numbers. We constructed a linkage map of pepper using a doubled haploid (DH) population derived from a cross between two C. annuum genotypes, a bell-type cultivar ‘California Wonder’ and a Malaysian small-fruited cultivar ‘LS2341 ({"type":"entrez-nucleotide","attrs":{"text":"JP187992","term_id":"347495878"}}JP187992)’, which is used as a source of resistance to bacterial wilt (Ralstonia solanacearum). A set of 253 markers (151 SSRs, 90 AFLPs, 10 CAPSs and 2 sequence-tagged sites) was on the map which we constructed, spanning 1,336 cM. This is the first SSR-based map to consist of 12 linkage groups, corresponding to the haploid chromosome number in an intraspecific cross of C. annuum. As this map has a lot of PCR-based anchor markers, it is easy to compare it to other pepper genetic maps. Therefore, this map and the newly developed markers will be useful for cultivated C. annuum breeding.     

Identification of QTLs for fruit quality traits in Japanese apples: QTLs for early ripening are tightly related to preharvest fruit drop

Many important apple (Malus × domestica Borkh.) fruit quality traits are regulated by multiple genes, and more information about quantitative trait loci (QTLs) for these traits is required for marker-assisted selection. In this study, we constructed genetic linkage maps of the Japanese apple cultivars ‘Orin’ and ‘Akane’ using F₁ seedlings derived from a cross between these cultivars. The ‘Orin’ map consisted of 251 loci covering 17 linkage groups (LGs; total length 1095.3 cM), and the ‘Akane’ map consisted of 291 loci covering 18 LGs (total length 1098.2 cM). We performed QTL analysis for 16 important traits, and found that four QTLs related to harvest time explained about 70% of genetic variation, and these will be useful for marker-assisted selection. The QTL for early harvest time in LG15 was located very close to the QTL for preharvest fruit drop. The QTL for skin color depth was located around the position of MYB1 in LG9, which suggested that alleles harbored by ‘Akane’ are regulating red color depth with different degrees of effect. We also analyzed soluble solids and sugar component contents, and found that a QTL for soluble solids content in LG16 could be explained by the amount of sorbitol and fructose.     

Fine mapping of the gene for susceptibility to black spot disease in Japanese pear (Pyrus pyrifolia Nakai)

Black spot disease, which is caused by the Japanese pear pathotype of the filamentous fungus Alternaria alternata (Fries) Keissler, is one of the most harmful diseases in Japanese pear cultivation. We mapped a gene for susceptibility to black spot disease in the Japanese pear (Pyrus pyrifolia Nakai) cultivar ‘Kinchaku’ (Aki gene) at the top of linkage group 11, similar to the positions of the susceptibility genes Ani in ‘Osa Nijisseiki’ and Ana in ‘Nansui’. Using synteny-based marker enrichment, we developed novel apple SSR markers in the target region. We constructed a fine map of linkage group 11 of ‘Kinchaku’ and localized the Aki locus within a 1.5-cM genome region between SSR markers Mdo.chr11.28 and Mdo.chr11.34. Marker Mdo.chr11.30 co-segregated with Aki in all 621 F₁ plantlets of a ‘Housui’ × ‘Kinchaku’ cross. The physical size of the Aki region, which includes three markers (Mdo.chr11.28, Mdo.chr11.30, and Mdo.chr11.34), was estimated to be 250 Kb in the ‘Golden Delicious’ apple genome and 107 Kb in the ‘Dangshansuli’ Chinese pear genome. Our results will help to identify the candidate gene for susceptibility to black spot disease in Japanese pear.     

甘蔗SSR和AFLP分子遗传连锁图谱构建

采用甘蔗商业品种Co419与野生种割手密Y75/1/2杂交,获得269个单株,组成F1群体,用F102/356与商业品种ROC25回交获得266个单株,组成BC1群体。利用筛选的多态性条带丰富的36对SSR引物和12对AFLP引物,对两个群体进行PCR扩增和分子遗传连锁分析,构建甘蔗分子遗传连锁图谱。用F1群体获得630个分离标记,经χ2检测,298个标记为单双剂量标记,占总标记数的47%;用BC1群体获得571个分离标记,有264个标记为单双剂量标记,占总标记数的46%;4个亲本获得单双剂量标记的数量依次为Co41902/356Y75/1/2ROC25。在LOD≥5.0,相邻标记遗传距离≤40cM的条件下,F1群体有134个单双剂量标记被纳入55个连锁群,其中39个连锁群归属8个同源组,16个未列入,总遗传距离为1458.3cM,标记间平均图距为10.9cM;BC1群体有133个单双剂量标记被纳入47个连锁群,其中34个连锁群归属于8个同源组,13个连锁群未列入,总遗传距离为1059.6cM,标记间平均图距为8.0cM。从4个亲本单双剂量标记进入的连锁群数来看,Co419最多,归入34个连锁群,其次为Y75/1/2,归入20个连锁群,第3为02/356和ROC25,归入19个连锁群。研究结果表明,从单双剂量标记比例、形成连锁群数量、总遗传距离来看,F1群体构图质量要优于BC1群体。     

Identification of QTLs controlling harvest time and fruit skin color in Japanese pear (Pyrus pyrifolia Nakai)

Using an F₁ population from a cross between Japanese pear (Pyrus pyrifolia Nakai) cultivars ‘Akiakari’ and ‘Taihaku’, we performed quantitative trait locus (QTL) analysis of seven fruit traits (harvest time, fruit skin color, flesh firmness, fruit weight, acid content, total soluble solids content, and preharvest fruit drop). The constructed simple sequence repeat-based genetic linkage map of ‘Akiakari’ consisted of 208 loci and spanned 799 cM; that of ‘Taihaku’ consisted of 275 loci and spanned 1039 cM. Out of significant QTLs, two QTLs for harvest time, one for fruit skin color, and one for flesh firmness were stably detected in two successive years. The QTLs for harvest time were located at the bottom of linkage group (LG) Tai3 (nearest marker: BGA35) and at the top of LG Tai15 (nearest markers: PPACS2 and MEST050), in good accordance with results of genome-wide association study. The PPACS2 gene, a member of the ACC synthase gene family, may control harvest time, preharvest fruit drop, and fruit storage potential. One major QTL associated with fruit skin color was identified at the top of LG 8. QTLs identified in this study would be useful for marker-assisted selection in Japanese pear breeding programs.     

Construction of a chromosome-assigned,sequence-tagged linkage map for the radish,Raphanus sativus L. and QTL analysis of morphological traits

The radish displays great morphological variation but the genetic factors underlying this variability are mostly unknown. To identify quantitative trait loci (QTLs) controlling radish morphological traits, we cultivated 94 F₄ and F₅ recombinant inbred lines derived from a cross between the rat-tail radish and the Japanese radish cultivar ‘Harufuku’ inbred lines. Eight morphological traits (ovule and seed numbers per silique, plant shape, pubescence and root formation) were measured for investigation. We constructed a map composed of 322 markers with a total length of 673.6 cM. The linkage groups were assigned to the radish chromosomes using disomic rape-radish chromosome-addition lines. On the map, eight and 10 QTLs were identified in 2008 and 2009, respectively. The chromosome-linkage group correspondence, the sequence-specific markers and the QTLs detected here will provide useful information for further genetic studies and for selection during radish breeding programs.     

Development of molecular linkage maps in sweet potato (Ipomoea batatas L.) using sequence‐related amplified polymorphism markers

Sweet potato is an important food crop with high starch content. It is a hexaploid species, for which the chromosomes have not yet been well characterized. In this study, we used 856 SRAP primer pairs to analyse the 240 individuals from a mapping population, which were derived from a hybrid F₁ generation of ‘Luoxushu 8’ (female) and ‘Zhengshu 20’ (male). Genetic linkage maps of the two parents were constructed. In the female parent (‘Luoxushu 8’), the linkage map consisted of 1391 markers, and the length of the linkage map was estimated to be 10,188.4 cM with an average distance of 7.17 cM between markers. In the male parent (‘Zhengshu 20’), the final linkage map consisted of 1,112 markers, and the estimated length of the map was 9,165.17 cM with an average distance of 8.40 cM between markers. Our results provide a basis for the detailed characterization of sweet potato chromosome sequences and the development of related molecular markers.     

Construction of a linkage map based on retrotransposon insertion polymorphisms in sweetpotato via high-throughput sequencing

Sweetpotato (Ipomoea batatas L.) is an outcrossing hexaploid species with a large number of chromosomes (2n = 6x = 90). Although sweetpotato is one of the world’s most important crops, genetic analysis of the species has been hindered by its genetic complexity combined with the lack of a whole genome sequence. In the present study, we constructed a genetic linkage map based on retrotransposon insertion polymorphisms using a mapping population derived from a cross between ‘Purple Sweet Lord’ (PSL) and ‘90IDN-47’ cultivars. High-throughput sequencing and subsequent data analyses identified many Rtsp-1 retrotransposon insertion sites, and their allele dosages (simplex, duplex, triplex, or double-simplex) were determined based on segregation ratios in the mapping population. Using a pseudo-testcross strategy, 43 and 47 linkage groups were generated for PSL and 90IDN-47, respectively. Interestingly, most of these insertions (~90%) were present in a simplex manner, indicating their utility for linkage map construction in polyploid species. Additionally, our approach led to savings of time and labor for genotyping. Although the number of markers herein was insufficient for map-based cloning, our trial analysis exhibited the utility of retrotransposon-based markers for linkage map construction in sweetpotato.     

Development of cultivar-specific DNA markers based on retrotransposon-based insertional polymorphism in Japanese pear

We developed retrotransposon-based insertional polymorphism (RBIP) markers based on the long terminal repeat (LTR) sequences of copia-like retrotransposon Ppcrt4 and flanking genome sequences, which were derived from 454 sequencing data from Japanese pear (Pyrus pyrifolia) ‘Hosui’. Out of 40 sequences including both LTR and flanking genome regions, we developed 22 RBIP markers and used them for DNA profiling of 80 pear cultivars: 64 Japanese, 10 Chinese (Pyrus ussuriensis) and 6 European (Pyrus communis). Three RBIP markers were enough to differentiate ‘Hosui’ from the other Japanese pear cultivars. The 22 RBIP markers could also distinguish 61 of the 64 Japanese pear cultivars. European pears showed almost no amplification of the 22 RBIP markers, which might suggest that retrotransposons had transposed during Asian pear evolution or reflect the genetic relationship between Asian and European pears. Sixteen of the RBIP markers could be positioned on a genetic linkage map of ‘Hosui’. The RBIP loci were distributed in 10 linkage groups, and some loci were very closely located within the same linkage group. The information obtained will be applicable to developing cultivar-specific RBIP marker sets in plants.     

Genetic linkage map of Chinese native variety faba bean (Vicia faba L.) based on simple sequence repeat markers

Simple sequence repeat (SSR) marker is a powerful tool for construction of genetic linkage map which can be applied for quantitative trait loci (QTL) and marker‐assisted selection (MAS). In this study, a genetic map of faba bean was constructed with SSR markers using a 129 F₂ individuals population derived from the cross of Chinese native variety 91825 (large seed) and K1563 (small seed). By screening 11 551 SSR primers between two parents, 149 primer pairs were detected polymorphic and used for F₂ population analysis. This SSR‐based genetic linkage map consisted of 15 linkage groups with 128 SSR. The map encompassed 1587 cM with an average genetic distance of 12.4 cM. The genetic map generated in this study will be beneficial for genetic studies of faba bean for identification of marker‐locus‐trait associations as well as comparative mapping among faba bean, pea and grasspea.     

Evaluation of the effects of five QTL regions on Fusarium head blight resistance and agronomic traits in spring wheat (Triticum aestivum L.)

Fusarium head blight (FHB) is an important disease of wheat (Triticum aestivum L.). The aim of this study was to determine the effects of quantitative trait locus (QTL) regions for resistance to FHB and estimate their effects on reducing FHB damage to wheat in Hokkaido, northern Japan. We examined 233 F₁-derived doubled-haploid (DH) lines from a cross between ‘Kukeiharu 14’ and ‘Sumai 3’ to determine their reaction to FHB during two seasons under field conditions. The DH lines were genotyped at five known FHB-resistance QTL regions (on chromosomes 3BS, 5AS, 6BS, 2DL and 4BS) by using SSR markers. ‘Sumai 3’ alleles at the QTLs at 3BS and 5AS effectively reduced FHB damage in the environment of Hokkaido, indicating that these QTLs will be useful for breeding spring wheat cultivars suitable for Hokkaido. Some of the QTL regions influenced agronomic traits: ‘Sumai 3’ alleles at the 4BS and 5AS QTLs significantly increased stem length and spike length, that at the 2DL QTL significantly decreased grain weight, and that at the 6BS QTL significantly delayed heading, indicating pleiotropic or linkage effects between these agronomic traits and FHB resistance.     

Development and validation of DNA markers linked to Sdvy-1, a common bean gene conferring resistance to the yellowing strain of Soybean dwarf virus

The yellowing strain of Soybean dwarf virus (SbDV-YS) causes yellowing and yield loss in common bean (Phaseolus vulgaris). The most effective control is achieved through breeding for resistance. An indeterminate climbing cultivar with a white seed coat, ‘Oofuku’, is resistant to SbDV-YS in inoculation tests. We crossed ‘Oofuku’ with an elite cultivar, ‘Taisho-Kintoki’, which is SbDV-YS-susceptible, determinate dwarf with a red-purple seed coat, and performed amplified-fragment-length polymorphism analysis of F₃ lines. From nucleotide sequences of the resistant-specific fragments and their flanking regions, we developed five DNA markers, of which DV86, DV386, and DV398 were closely linked to Sdvy-1, a resistance gene. Using the markers, we developed ‘Toiku-B79’ and ‘Toiku-B80’, the near-isogenic lines (NILs) incorporating Sdvy-1 in the background of ‘Taisho-Kintoki’. The NILs had similar growth habit, maturity date and seed shape to those of ‘Taisho-Kintoki’. The quality of boiled beans was also similar, except that the NILs had more seed coat cracking than ‘Taisho-Kintoki’. The NILs showed no SbDV-YS infection in inoculation tests. We suggest that Sdvy-1 is a useful source of SbDV-YS resistance in common bean.     

Genetic mapping of AFLP markers in Japanese bunching onion (<Emphasis Type="Italic">Allium fistulosum</Emphasis>)

Summary The first genetic linkage map of Japanese bunching onion (Allium fistulosum) based primarily on AFLP markers was constructed using reciprocally backcrossed progenies. They were 120 plants each of (P₁)BC₁ and (P₂)BC₁ populations derived from a cross between single plants of two inbred lines: D1s-15s-22 (P₁) and J1s-14s-20 (P₂). Based on the (P₂)BC₁ population, a linkage map of P₁ was constructed. It comprises 164 markers – 149 amplified fragment length polymorphisms (AFLPs), 2 cleaved amplified polymorphic sequences (CAPSs), and 12 simple sequence repeats (SSRs) from Japanese bunching onion, and 1 SSR from bulb onion (A. cepa) – on 15 linkage groups covering 947 centiMorgans (cM). The linkage map of P₂ was constructed with the (P₁)BC₁ population and composed of 120 loci – 105 AFLPs, 1 CAPS, and 13 SSRs developed from Japanese bunching onion and 1 SSR from bulb onion – on 14 linkage groups covering 775 cM. Both maps were not saturated but were considered to cover the majority of the genome. Nine linkage groups in P₂ map were connected with their counterparts in P₁ map using co-dominant anchor markers, 13 SSRs and 1 CAPS.     

The European Prunus mapping project Progress in the almond linkage map

Summary Six European research groups are collaborating to develop genetic markers and linkage maps for use inPrunus breeding programmes. A basic map with 200 RFLPs and 50 more markers including isozymes and RAPDs will be constructed using two highly segregating populations: an interspecific peach × almond F₂ and a cherry F₂. Then, the parents of eleven almond, cherry, peach or plum breeding progenies segregating for target characters will be screened for polymorphisms at the marker loci, and a set of reduced maps, one per progeny, will be constructed with markers spaced 20–30 cM and covering the whole genome. Cosegregation analysis of markers and characters of interest will allow us to find linkages between markers and major genes or quantitative trait loci responsible for the expression of these traits. A map with 72 markers, 7 isozymes and 65 RFLPs, has been developed at the IRTA-Cabrils laboratory using an intraspecific almond progeny, ‘Ferragnes’ × ‘Mono’. Probes for the analysis of RFLPs were obtained from almond genomic and cDNA libraries. The level of polymorphism for RFLPs and the distribution of markers in the chromosomes of almond are discussed.     

Comparison and integration of genetic maps generated from F2 and BC1-type mapping populations in perennial ryegrass

Linkage maps of perennial ryegrass were constructed from F₂ and BC₁‐type populations using, predominantly, restriction fragment length polymorphism data based on heterologous probes used in mapping other grass species. The maps identified seven linkage groups, which covered a total of 515 cM (F₂) and 565 cM (BC₁). They were aligned using 38 loci identified in both populations (common loci) and a possible marker order for all mapped loci in either population was identified in an integrated map. The estimated recombination frequencies and map distances between adjacent common loci were compared between the two data sets and regions of heterogeneity identified. Overall, the common markers identified a map distance of 446 cM in the F₂ population and 327 cM in the BC₁ population, reflecting a higher recombination frequency in the former, although the difference was not evenly spread over the seven linkage groups.     

Mapping of QTLs controlling epicotyl length in adzuki bean (Vigna angularis)

Epicotyl length (ECL) of adzuki bean (Vigna angularis) affects the efficiency of mechanized weeding and harvest. The present study investigated the genetic factors controlling ECL. An F₂ population derived from a cross between the breeding line ‘Tokei1121’ (T1121, long epicotyls) and the cultivar ‘Erimo167’ (common epicotyls) was phenotyped for ECL and genotyped using simple sequence repeats (SSRs) and single-nucleotide polymorphism (SNP) markers. A molecular linkage map was generated and fifty-two segregating markers, including 27 SSRs and 25 SNPs, were located on seven linkage groups (LGs) at a LOD threshold value of 3.0. Four quantitative trait loci (QTLs) for ECL, with LOD scores of 4.0, 3.4, 4.8 and 6.4, were identified on LGs 2, 4, 7 and 10, respectively; together, these four QTLs accounted for 49.3% of the phenotypic variance. The segregation patterns observed in F₅ residual heterozygous lines at qECL10 revealed that a single recessive gene derived from T1121 contributed to the longer ECL phenotype. Using five insertion and deletion markers, this gene was fine mapped to a ~255 kb region near the end of LG10. These findings will facilitate marker-assisted selection for breeding in the adzuki bean and contribute to an understanding of the mechanisms associated with epicotyl elongation.     

Construction of an integrated genetic map based on maternal and paternal lineages of tea (Camellia sinensis)

Genetic study on important traits of tea is difficult because of its self-incompatibility in nature. Moreover, development of a new variety usually needs more than 20 years, since it takes many years from seedling to matured plants for trait investigation. Genetic map is an essential tool for genetic study and breeding. In this study, we have developed an integrated genetic map of tea (Camellia sinensis) using a segregating F1 population derived from a cross between two commercial cultivars (‘TTES 19’ and ‘TTES 8’). A total of 574 polymorphic markers (including SSR, CAPS, STS, AFLP, ISSR and RAPD), 69 markers with highly significant levels of segregation distortion (P < 0.001) (12.0 %) were excluded from further analyses. Of the 505 mapped markers, there were 265 paternal markers (52.5 %), 163 maternal markers (32.3 %), 65 doubly heterozygous dominant markers (12.9 %), and 12 co-dominant markers (2.4 %). The co-dominant markers and doubly heterozygous dominant markers were used as bridge loci for the integration of the paternal and maternal maps. The integrated map comprised 367 linked markers, including 36 SSR, 3 CAPS, 1 STS, 250 AFLP, 13 ISSR and 64 RAPD that were assigned to 18 linkage groups. The linkage groups represented a total map length of 4482.9 cM with a map density of 12.2 cM. This genetic map has the highest genetic coverage so far, which could be applied to comparative mapping, QTL mapping and marker assisted selection in the future.