Moisture diffusion coefficient of reaction woods: compression wood of Picea abies L. and tension wood of Fagus sylvatica L.

The moisture diffusion coefficient of compression wood in spruce (P. abies) and tension wood in beech (F. sylvatica) was examined. The results indicated that the diffusion coefficient measured under steady-state condition (cup method) could well characterize the drying kinetics of the reaction woods. The compression wood offered more resistance to the moisture diffusivity when compared with the corresponding normal wood. The thick cell wall rich in lignin explains the small mass diffusivity in compression wood. In contrast, the mass diffusivity in beech is almost always higher in tension wood than in normal wood, in spite of similar density values. The high moisture diffusion in tension wood can be explained by the ease of bound water diffusion in the gelatinous layers (G-layers).     

航空遥感技术监测松材线虫病的应用

探讨了通过航空录像技术获取林木健康信息及手持式GPS地面定位变色树木的方法。结果表明,遥感监测所获取的地面变色的树木数据资料能够较为准确地与地面对应。利用该方法能够对有松材线虫病症状的松林准确、快速定位,从而起到及时监测疫情的作用。     

Anti-inflammatory lignanamides from the roots of Solanum melongena L.

Four new lignanamides, melongenamides A–D (1–4), together with six known ones (5–10), were isolated from the roots of Solanum melongena L. Their structures were elucidated on the basis of 1D and 2D NMR experiments and by comparison of their spectroscopic and physical data with the literature values. Compounds 2–8 exhibited inhibitions of nitric oxide production in lipopolysaccharide-induced RAW 264.7 macrophages with IC₅₀ values ranging from 16.2 to 58.5 μM.     

New terpenoid glycosides obtained from Rosmarinus officinalis L. aerial parts

Five new terpenoid glycosides, named as officinoterpenosides A₁ (1), A₂ (2), B (3), C (4), and D (5), together with 11 known ones, (1S,4S,5S)-5-exo-hydrocamphor 5-O-β-d-glucopyranoside (6), isorosmanol (7), rosmanol (8), 7-methoxyrosmanol (9), epirosmanol (10), ursolic acid (11), micromeric acid (12), oleanolic acid (13), niga-ichigoside F₁ (14), glucosyl tormentate (15), and asteryunnanoside B (16), were obtained from the aerial parts of Rosmarinus officinalis L. Their structures were elucidated by chemical and spectroscopic methods (UV, IR, HRESI-TOF-MS, 1D and 2D NMR). Among the new ones, 1 and 2, 3 and 4 are diterpenoid and triterpenoid glycosides, respectively; and 5 is a normonoterpenoid. For the known ones, 6 was isolated from the Rosmarinus genus first, and 15, 16 were obtained from this species for the first time.     

Distribution of lignin in normal and compression wood of Pinus taeda L.

Summary The distribution of lignin in normal and compression wood of loblolly pine (Pinus taeda L.) has been studied by the technique of lignin skeletonizing. Hydrolysis of the wood carbohydrates with hydrofluoric acid left normal wood tracheids with a uniform distribution of lignin in the S1 and S2 cell wall layers. However, the S3 region of both earlywood and latewood tracheids consistently retained a dense network of unhydrolyzable material throughout, perhaps lignin.Lignin content in compression wood averaged about 7% more than in normal wood and appears to be concentrated in the outer zone of the S2 layer. The inner S2 region, despite helical checking, is also heavily lignified. The S1 layer, although thicker than normal in compression wood tracheids, contains relatively little lignin.Ray cells, at least in normal wood, appear to be lignified to the same extent, if not more so in certain cases, than the longitudinal tracheids. Other locations where lignin may be concentrated include initial pit border regions and the membranes of bordered pits.This report is a detailed excerpt from the Ph. D. dissertation of R. A. P. Financial support provided by the College of Forestry at Syracuse University and the National Defense Education Act is hereby gratefully acknowledged.     

Identification of moisture-induced stresses in cross-laminated wood panels from beech wood (Fagus sylvatica L.)

The crosswise bonding of the layers in laminated solid wood panels results in internal stresses when the humidity varies. The layers hinder one another as a result of the anisotropy of wood. The purpose of this study was to determine the internal stress state in free and constrained swelling. The expansion properties in the three panel directions were measured. Furthermore, the swelling of samples was constrained while the resulting forces were recorded. Hygroscopic warping experiments were carried out inducing a climate gradient within the panels. Afterwards the stresses were calculated from released deformations and non-destructive measurements of the Young’s modulus. The materials used were untreated and heat-treated beech wood, the latter modified in two levels. In addition to homogenously structured panels, treated top layers were combined with an untreated middle layer. Swelling, swelling pressure, warping and internal stresses considerably decreased from untreated to treated wood. If layers from treated and untreated material were combined, stresses and deformations increased as compared to the variants produced only from treated wood. It was concluded that the lower equilibrium moisture content of heat-treated beech wood improves its dimensional stability, which results in smaller deformation differences between the layers. Hence, the stresses were less distinctive.     

TEM/FE-SEM studies on tension wood fibres of Acer spp., Fagus sylvatica L. and Quercus robur L.

Tension wood (TW) fibres from maple, beech and oak were analysed with special emphasis on the cell wall fine structure and deposition of aromatic compounds within the gelatinous layer (GL). For this purpose, transmission electron microscopy (TEM) was applied after section staining with potassium permanganate. There was evidence for the occurrence of aromatic compounds in the GLs of fibres of all three species. Some GLs showed a concentric sub-layering. Hence, conclusions about the biosynthetic activities during cell wall formation in TW could be derived. Additional information about structural characteristics of TW fibres were obtained by means of field emission electron microscopy. High-resolution micrographs of cell walls were used for measurements of diameter and microfibril angle (MFA) of cellulose aggregates (CAG). CAG of 7 nm were observed although their diameter varied greatly in the GLs. MFA in the secondary wall of TW was slightly smaller than in opposite wood. The microscopic methods provided complementary ultrastructural and topochemical information on tension wood fibres. The subcellular localisation of aromatic compounds and the observations of the ultrastructural morphology will contribute to the understanding of origin and functionality of TW and its characteristic GL.     

Ultrastructure of ray parenchyma cells in the wood of Melia azedarach L. (Meliaceae)

Summary The fine structure of ray parenchyma cells in the sapwood during its transformation to heartwood in Melia azedarach L. (Meliaceae) is described. They have thick walls with electron dense and opaque lamellations. Many branched and unbranched plasmodesmatal connections are present on their lateral and end walls. The cells in the outer sapwood show abundant starch which disappears completely in the inner sapwood ant at the sapwood-heartwood boundary. The morphological features of the starch grain during its depletion are described and their association with lipid formation is indicated. It is suggested that the phenolic materials in the heartwood cells are formed at the sapwood-heartwood boundary.Abbreviations Cy Cytoplasm - ER Endoplasmic reticulum - L Lipid droplet - M Mitochondrion - ML Middle lamella - MVB Multivesicular body - N Nucleus - P Pit-field - PC Pit cavity - PD Plasmodesmata - PL Plasmalemma - St Starch - V Vacuole - VS Vesicle - W Wall The authors thank the Council of Scientific and Industrial Research and University Grants Commission, New Delhi, India for the financial assistance     

Seasonal variation in ethylene concentration in the wood of Pinus sylvestris L

Ethylene concentrations were determined in gas samples extracted from sealed holes made in the sapwood and heartwood of stems of 70-100-year-old Scots pine (Pinus sylvestris L). Gas could be collected from the heartwood holes by lowering the pressure by means of a large syringe. However, attempts to extract gas from air spaces in the sapwood with the same technique failed, presumably because of lack of an interconnected system of gas-filled canals. High ethylene concentrations, usually in excess of 1 ppm, accumulated in the sapwood holes within one day after sealing. Ethylene concentrations in the sapwood rose to 3-7 ppm during the growing season, and decreased to 0.1-0.3 ppm during the winter. In response to extreme drought, sapwood ethylene concentration increased to 30 ppm, followed by a rapid decrease after the onset of rain. Ethylene concentrations in gas samples from the heartwood were consistently lower than 1 ppm. The lowest values, about 0.1 ppm, were found during the autumn and early winter, whereas values around 0.5 ppm were typical from February to August.     

Ectomycorrhizal colonisation of roots and ash granules in a spruce forest treated with granulated wood ash

Granulated wood ash has been proposed as a slow release fertiliser suitable for forest soils. In this study ectomycorrhizal colonisation of roots and ash granules was studied in a 40-year-old spruce forest treated with 0, 3 or 6 t ha⁻¹ granulated wood ash. We used PCR-RFLP methods for ITS-typing and identification of ectomycorrhizal fungi. In total 20 different ITS-types were recognised on roots in the organic soil horizon. Five of these were identified to species and two to genus. Six species, Tylospora fibrillosa Donk, Cortinarius sp. 3, Piloderma sp. 1, and three unidentified ITS-types (Ve-95-1, Tö-95-3 and Ve-95-9) each occurred on over 5% of the total root tips analysed. Together these comprised 55% of the ectomycorrhizal community on the screened roots.

Ash granules collected from the fertilised plots were normally colonised by fungal mycelia. PCR-RFLP analysis of these mycelia revealed the presence of four ITS-types. Three of these (Piloderma sp. 1, Ha-96-3 and Tor-97-1) were also present on the mycorrhizal roots. Piloderma sp. 1 was the most abundant species colonising roots. A possible role of ectomycorrhizal mycelia in the direct mobilisation of nutrients from ash granules is discussed.     

New amide alkaloid from the aerial part of Piper capense L.f. (Piperaceae)

Together with apigenine dimethylether and piperchabamide A, a new amide alkaloid, Kaousine and the Z form of antiepilepsirine were isolated from the aerial part of Piper capense L.f (Piperaceae). Their structures were elucidated by spectrometric methods and their in vitro antiparasitic activities were evaluated on Plasmodium falciparum.     

The growth of shoots and lateral roots of Quercus robur L. seedlings following simulated undercutting

The effect of cutting the tap root on shoot growth and development of lateral roots was observed in seedling Quercus robur L. growing in PVC tubes containing peat and perlite. Cutting the tap root had little effect on shoot height and leaf number although some treatments caused a significant but slight reduction in shoot dry weight and number of branches. Total root dry weight was similar in control and treated plants but distributed differently between the types of root present. The tap root always formed the largest part of the total root dry weight. In control plants most lateral root dry weight was in roots < 1 mm diameter whereas in treated plants most dry weight was in roots > 1 mm diameter. Development of the root system following root cutting was similar for all treatments: new long laterals > 1 mm diameter with relatively few branches, that formed replacement tap roots, developed near the cut end of the original tap root. Fine laterals (< 1 mm diameter) near the root collar continued to grow forming highly branched systems.     

绿得宝林间防治赤松毛虫药效试验

2 0 0 1年 5月 11日 ,在青龙县焦杖子村油松林内进行了用绿得宝喷雾防治赤松毛虫药效试验。每 667m2 用药 35、4 0、4 5、5 0 ml,共 4个剂量进行试验。药后 2 4、4 8、72 h、7、10 d共分 5次进行效果调查。结果发现 ,药后 10 d的防效分别为 91.99%、98.2 4 %、98.8%、99.5 6%。经方差分析及q检验表明 ,667m2 用药量 4 0、4 5、5 0 ml3个剂量均与 35 ml剂量有显著差异 ,而 4 0、4 5、5 0 ml3个剂量间无显著差异 ,均可选用。建议生产中使用每 667m2 4 0 ml剂量进行喷雾防治     

Genetic variation in wood stiffness and strength properties of hybrid larch (Larix gmelinii var. japonica × L. kaempferi)

Genetic parameters for wood stiffness and strength properties were estimated in a 29-year-old hybrid larch stand (Larix gmelinii var. japonica × Larix kaempferi). The study included 19 full-sib larch families from Hokkaido, northern Japan. Implications of these genetic parameters in wood quality improvement are subsequently discussed. Traits included in the analyses were the dynamic modulus of elasticity of green logs (E _log), the modulus of elasticity (MOE), the modulus of rupture (MOR), compression strength parallel to the grain (CS) in small clear specimens, wood density (DEN), and diameter at breast height (DBH). DEN had the lowest coefficients of variation and MOE the highest. The narrow-sense heritability estimates of E _log, MOE, MOR, and CS were 0.61, 0.44, 0.60, and 0.43, respectively, and those of DEN and all mechanical properties increased from an inner to outer position within the stem. E _log and DEN had high positive phenotypic (0.52–0.83) and genetic (0.70–0.92) correlations with MOE, MOR, and CS. The mechanical properties of the inner position of the stem had rather high phenotypic and genetic correlations with those of the outer position and overall mean. The predicted gains in wood stiffness (E _log and MOE) were higher than those of the strength properties (MOR and CS). The predicted correlated responses in MOE, MOR, and CS when selecting for E _log and DEN were 72.6%–97.8% of a gain achievable from direct selection of these traits. DBH showed an insignificant correlation with all mechanical properties, although selection of this trait had a slightly negative effect on the mechanical properties.     

The influence of coppiced teak (Tectona grandis L.F.) regrowth and roots on intercropped maize (Zea mays L.)

Trenching and shoot removal showed the relative influences of living roots and the canopy cast by teak (Tectona grandis L.F.) coppice regrowth on the growth and yield of interplanted maize (Zea mays L.). Teak and maize were planted at 1.8 × 1.8 m and 0.3 × 1.8 m spacing respectively.Competition for light started about four weeks after planting and caused etiolated height growth of maize. When combined with root competition it caused stunted growth. Shading also substantially reduced total dry matter production, grain yield, number of cobs per plant, average cob weight, and weight of grains per cob of maize (P<0.01). Living teak roots alone did not have a significant effect (P>0.05) on maize height growth, total dry matter production, grain yield, number of cobs per plant,average cob weight and weight of grains per cob. However, combined with shading, living roots of teak appreciably reduced total dry matter yield and average cob weight of maize (P<0.01).     

Growth and wood density of Pinus taeda L. as affected by shelterwood harvest in a two-aged stand in Southern Brazil

Pine plantations are an important wood source in Brazil, with Pinus taeda being most frequently planted. Most pinewood is directed to the paper and pulp industry, but there is an increasing demand for wood for solid end-uses, requiring large stems from longer rotations which can be obtained using P. taeda as the canopy in two-aged stands. We evaluated radial growth and wood density at different stem heights of P. taeda in the highlands of Southern Brazil over a production period of 36 years and subjected to shelterwood harvest. Cross-sectional disks were obtained from 15 trees in different stem heights; 10 were used for growth analyses and 5 for growth and density analyses. We used disk images and X-ray techniques for growth and density analyses, respectively. Samples were analyzed for ring (width and density), earlywood, and latewood (width, density, and proportion). Ring width varied between 0.4 and 1.7 cm, with the widest rings in the first years (3–5 years.) of growth. Ring density increased with age, with higher densities on the lower stem portions. Mature wood started to be formed from the 16th ring onwards. Shelterwood harvest affected both ring width and density, but the effects on ring width lasted for at least 5 years, while the effects on wood density were short-lasting. Mature P. taeda trees increased their size after the shelterwood harvest without compromising their wood density. Longer production periods of P. taeda as retained trees in the canopy of two-aged stands provide high-quality wood for structural purposes.

     

Constituents from aerial parts of Wedelia paludosa.

Tetrachyrin (1), 3alpha-tigloyloxykaur-16-en-19-oic acid (2) and 3alpha-cinnamoyloxykaur-16-en-19-oic acid (3) have been isolated from the ethanol extract of Wedelia paludosa aerial parts.     

Study of the release in water of chemicals used for wood preservation. Effect of wood dimensions

Summary Various chemicals are used for protecting wood samples against fungi, and some of them are released in water, leading to pollution of the water. The kinetics of pentachlorophenol release in water has here been studied by considering the diffusion through the wood along the three principal axes of diffusion. The experiments and the modelling of the process is successfully coupled. The numerical model takes into account the three principal diffusivities, the partition factor, the volumes of wood and water. The effect of wood sample length along the longitudinal axis of diffusion is studied especially, as longitudinal diffusivity is much higher than the other two principal diffusivities. The effects of the relative volumes of wood and water are also of considerable interest not only for the concentration of the chemical in water but also for the rate of release.Symbols C concentration of liquid (g/cm³)_ - C _c ,C _eq concentration of liquid on the surface, at equilibrium with the surrounding, respectively - C _i,j,k concentration of liquid in the wood at positioni, j, k - D diffusivity (cm²/s) - h coefficient of mass transfer on the surface (cm/s) - K partition factor - i, j, k integers characterizing the position in the wood - M _L ,M _R ,M _T dimensionless numbers - M _t ,M amount of chemical released after time t, after infinite time, respectively - t increment of time - L, R, T thickness of the slices taken in the wood for calculation - N _L ,N _R ,N _T number of slices taken in the wood - x, y, z coordinates - V _water volume of the surrounding water     

Impregnation of Norway spruce (Picea abies L. Karst.) wood by hydrophobic oil and dispersion patterns in different tissues

Wood from Norway spruce (Picea abies L. Karst.) is biologicallydegraded in exposed conditions. It also has anatomical featuresthat make it difficult to impregnate with preservatives by currentlyavailable industrial processes. In the study reported here,we used the new Linotech process to impregnate Norway sprucewood with hydrophobic linseed oil and then quantified its uptakeand dispersal in anatomically distinct wood tissues. We alsoinvestigated the effects of the wood moisture content on theresults of the impregnation. Samples (500 x 25 x 25 mm) weretaken from 15 trees in a coniferous forest in northern Sweden(64° 10' N, 160–320 m a.s.l.). The parameters forthe Linotech process were 2–3 h treatment time at 0.8–1.4MPa and 60–140°C. To determine the level of uptake,the linseed oil was extracted from the impregnated wood usingmethyl-tertiary-butyl-ether. The uptake was quantitatively analysedby comparing X-ray microdensitometry values obtained followingimpregnation both before and after oil removal. In earlywood,initial moisture content had an obvious effect on the impregnationresult. Six times more oil was taken up when the moisture contentwas greater than ~150 per cent than when it was less than 30per cent. Theoretical calculations, based on density levels,suggest that the water-filled porosity of the wood (water volumedivided by porosity volume) was positively correlated with thelinseed oil uptake, and more strongly correlated in earlywoodthan in latewood. There were also significant differences inuptake between different wood tissues; heartwood/mature woodand heartwood/juvenile wood showed 10–20 per cent weightincreases due to linseed oil uptake, compared with 30–50per cent in sapwood/mature wood. Examination by scanning electronmicroscopy confirmed these uptake patterns. The moisture contentafter impregnation was about 5 per cent, irrespective of theLinotech process parameters, tissue type and initial moisturecontent. In conclusion, the impregnation process used here resultsin high levels of well-dispersed linseed oil uptake and shouldfacilitate drying.