Five heavy metals in propagules of ten mangrove species of China

Five heavy metals in the propagules of 10 mangrove species in China have been investigated. The results revealed that the levels of five heavy metals in most of the propagules were lower than the background levels of the soil. The levels of copper, manganese, zinc, cadmium, and lead in the propagules varied at about 2.1–7.8 g/g, 3.9–28.0 g/g, 5.7–60.0 g/g, 0.014–0.057 g/g, and 0.018–0.038 g/g, respectively. On average, the levels of five heavy metals were in the order Zn > Mn > Cu > Cd > Pb. The biological absorption coefficients were 0.02–1.30 for copper, manganese, zinc, and cadmium and about 0.0007–0.0020 for lead in propagules, showing the following order: Zn > Cd > Cu > Mn > Pb. The above results indicate that the five heavy metals have low accumulation in most of the propagules of 10 mangrove species and are at safe levels for the effective utilization of mangrove resources.     

Studies on opposite wood in conifers part II: Histology and ultrastructure

Summary A study has been made of the histology and ultrastructure of opposite wood in Larix laricina, Picea rubens, and Pinus resinosa. The width of the growth rings varied considerably, in one case from 0.1–1.0 mm, with the wide rings containing a much higher proportion of latewood than the narrow ones. The earlywood tracheids were square in outline and more regularly arranged than in normal wood. In the latewood they were sometimes irregular and distorted. The S₃ layer in the tracheids was 0.2 m thick in the earlywood and 0.4–0.8 m in the latewood, as compared to a thickness in normal wood of 0.1–0.2 m in both zones. The S₃ was often buckled in the latewood and was terminated towards the lumen by a spiral thickening. The cell wall structure of the tracheid pit border was described. Normal coniferous wood might be regarded as an intermediate between opposite wood and compression wood.This paper is dedicated to Dean Edwin C. Jahn in honor of his 70th birthday.     

Field measurements of gas exchange in Avicennia marina and Bruguiera gymnorrhiza

Diurnal gas exchange characteristics were measured simultaneously in two mangrove species, Avicennia marina and Bruguiera gymnorrhiza, over 7 d in summer (February–March), to compare their productivity. The study was undertaken in the Beachwood Mangroves Nature Reserve, Durban, South Africa, using fully expanded leaves of young and mature trees at the top of the canopy. Gas exchange was strongly influenced by photosynthetic photon flux density (PPFD), leaf temperature and the accompanying leaf to air vapour pressure deficit ( w). Carbon dioxide exchange was saturated at a PPFD of about 600 mol m^-2s^-1 in B. gymnorrhiza compared to 800 mol m^-2s^-1 in A. marina. Maximal CO₂ exchange occurred between 12h00 and 14h00 and was consistently greater in A. marina (8.8 mol m^-2s^-1) than in B. gymnorrhiza (5.3 mu;mol m^-2s^-1). Mean internal CO₂ concentrations ( c_i) were 260 l l^-1 in A. marina and 252 l l^-1 in B. gymnorrhiza. Photorespiratory activity was 32% in A. marina and 30% in B. gymnorrhiza. Mean water use efficiency (WUE) was 8.0 mol mmol^-1 in A. marina and 10.6 mol mmol^-1 in B. gymnorrhiza. Diurnal leaf water potentials ranged from –0.8 to –3.5 MPa and were generally lower in A. marina.     

Biological resistance of Zn-Al metal-coated wood

Sapwood blocks of sugi (Cryptomeria japonica) and akamatsu (Pinus densiflora) were coated with Zn/Al (45%/55%) alloy metal at thicknesses of 20–30, 90–100, and 180–200m by an arc spray gun. They were served for choice and no-choice tests with a brown rot fungus (Fomitopsis palustris), a white rot fungus (Trametes versicolor), and a pest termite (Coptotermes formosanus). Coating thickness of 20–30m was enough to prevent attacks by both test fungi, whereas 90–100m thickness was needed for protection against termite attacks. Exfoliation of the coating layers was observed during the wet-dry process in the tests. The results suggested that Zn-Al alloy metal coating treatment was applicable as an alternative method for the protection of timbers from biological deterioration when combined with an additional treatment creating a vapor barrier.This research was presented at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998     

Commercial micropropagation of five Alnus species

Clonal micropropagation was demonstrated as feasible on a commercial basis for several clones of five Alnus species. Approximately 60,000 ready-to-root individual shoots were multiplied in vitro on modified MS medium supplemented with 2.5–5 M BAP. A total of 15,500 shoots from different clones were rooted in vitro on half strength MS medium including 1–5 M IBA. They were transferred under mist conditions within a growth chamber illuminated with high pressure sodium lamps. Those conditions gave 99–100% plantlet survival after four weeks. Plantlets were then inoculated with selected Frankia sp. strains. These nodulated alder plants are under field evaluation at the Petawawa National Forestry Institute, Canadian Forestry Service in Chalk River, Ontario.     

Cultural factors influencing adventitious shoot and plantlet formation from slash pine cotyledons

Cultural factors affecting in vitro shoot and subsequent plantlet formation of slash pine (Pinus elliotti Engelm.) cotyledons were investigated. Basal media composition, N⁶-benzylaminopurine (BAP) concentration and exposure time significantly influenced bud induction in cotyledons cultured under a continuous photoperiod of 35–40 mol m^–2 s^–1 at 24 ± 1 °C. The largest number of adventitious shoots was obtained after 28 days exposure to 66 M BAP-supplemented modified Gresshoff and Doy 1 (GD1) medium. Relatively high frequencies of large shoots were obtained after a 14-day exposure to 22 M BAP-supplemented Brown and Lawrence (BL) or 66 M BAP-supplemented GD1. Adventitious shoots derived from 21- or 28-day exposures to BAP developed more slowly and were smaller in size than those derived from a 14-day exposure to the cytokinin. Shoot differentiation and subsequent growth were also influenced by basal media, media concentration, and presence of activated charcoal in the medium. The percentage of cotyledons forming shoots was highest on half-strength GD1 medium containing activated charcoal. Rooting was achieved in vitro under a continuous photoperiod of 60–70 mol M^–2 S^–1. Roots were formed when excised shoots were planted on GD 1/2 medium supplemented with 2.68 M 1^–1 a-napthaleneacetic acid (NAA) with or without BAP for 14 days. The proposed technique of slash pine propagation using cotyledon explants can produce up to 100 seedlings per embryo.     

Water circulation, groundwater outflow and nutrient dynamics in Mida creek, Kenya

The relationship between physical hydrodynamic processes and nutrients dynamics was investigated in Mida creek, a groundwater influenced mangrovefringed creek in Kenya between March 1996 and May 1997. The research involved spot and timeseries measurement of nitrate–nitrite, ammonia, silicates, phosphates, salinity, temperature, sealevel as well as tidal currents at seven stations located in the front, middle and backwater zones of the creek. Groundwater level as well as total dissolved solids' concentration, salinity, temperature and nutrients' concentration were also measured once every month in shallow wells (watertable<5m) located in the upper region of the creek. Results of the study show that nutrient concentrations vary with the tide and that, though there is no river drainage, they are of the same magnitude as in mangrove creeks with substantial river runoff. The peak concentrations of NH ₄ ⁺ –N (5.45M), NO ₂ –NO ₃ (5.63M), PO ₄ ^3– –P (0.58M) and SiO ₃ ^2– –Si (81.36M) in the creek occurred during flood tide, 2–3h before high waters. The (NO ₂ ^– + NO ₃ ^– )–N concentrations declined rapidly during ebb tide, reaching the minimum levels during low water. Contribution of groundwater seepage to the net nutrients flux (particularly on nitrite–nitrates) is largest in dry seasons. The study shows that groundwater outflow sustains the mangroves during periods of severe salinity stress and nutrients deficiency in dry seasons. This is essentially by limiting salinity increase and by boosting nutrient supply in dry seasons.     

Cross sectional dimensions of wood pulp fibers from softwood fiber counts

Summary There are, on the average, about 300 fibers or tracheids per centimeter in both the tangential and radial directions in cross sections of softwoods when the counts are made over complete annual rings with the extremes varying from about 200 fibers per centimeter for redwood to about 400 fibers per centimeter for Alaska yellow cedar. Fiber widths, including half of surrounding middle lamella, range from about 50 m for redwood to 25m for Alaska yellow cedar, averaging about 33 m. Average lumen widths vary but slightly with changes in the specific gravity of the wood whereas the double cell wall thickness varies directly with the specific gravity. Effects of pulping to different pulp yields on the fiber dimensions are calculated with the use of two newly developed equations. The theoretical thickness of completely collapsed pulp fibers is equal to their double cell wall thickness. Complete collapse rarely if ever occurs as it requires double fractures of the cell wall. In practice, collapse of fibers is incomplete so their thickness is usually two or more times the theoretical minimum.Emeritus Robertson Professor of Wood and Paper Science, North Carolina State University, Raleigh, N.C., U.S.A.     

Ultrastructure of pits inPinus banksiana lamb

Summary The cross-sectional view of pitting between various cell types inPinus banksiana Lamb. was studied at the ultrastructural level. Cell types inPinus banksiana include longitudinal tracheids, ray tracheids, ray parenchyma cells, buffer cells and epithelial cells. Two common characteristic features of bordered pit-pairs between longitudinal tracheids are an initial pit border and a thickened torus at the center of the pit membrane. The shape and size of the pit border and torus of bordered pit-pairs between two compression wood cells, and between the last-formed latewood longitudinal tracheid and first-formed earlywood longitudinal tracheid were different from those in the earlywood and latewood longitudinal tracheids. The pit border on the ray tracheid side varied in size and shape due to wall dentation. No initial pit border was found on the pit border of the ray tracheid side. The shape of bordered pit-pairs between two ray tracheids varied considerably due to irregularity of the dentate cell wall. The size of bordered pit-pairs in longitudinal tracheids was between 16 m to 20 m, which was twice the diameter of bordered pit-pairs in ray tracheids. Bordered pitpairs at the end wall of two ray tracheids appeared to be the smallest at 5 m, Pit aspiration occurred in the bordered pit-pairs with or without a torus. In the heartwood zone, some half-borders pit-pairs between tracheary and ray parenchyma cells showed an additional secondary wall on the ray parenchyma cell side. Plasmodesmata were found in the half-bordered pit-pairs as well in the simple pit-pairs. Blind pits were observed between a ray tracheid and a longitudinal tracheid. Bordered pit-pairs between two buffer cells were also observed. The possible functions of buffer cells were discussed.Use of transmission electron microscope provided by the Science Instrumentation Lab, Lakehead University and the technical assistance provided by Mr. A. MacKenzie, Director of Science Instrumentation Lab are gratefully appreciated     

A study on some anatomical parameters of the piercing-sucking process in leaves and branches of<Emphasis Type="Italic"> Pittosporum tobira</Emphasis> L. (Pittosporaceae) infested by the cottony cushion scale,<Emphasis Type="Italic"> Icerya purchasi</Emphasis> Maskell (Homoptera: Coccina,Margarodidae)

Pittosporum tobira L. (Family Pittosporaceae) is an important plant species grown in parks and gardens in Turkey. The cottony cushion scale, Icerya purchasi Maskell (Homoptera: Coccina, Margarodidae), is an important pest of P. tobira, and causes damage mainly to the leaves, branches and stems of the host plant. In spite of the great economic importance of I. purchasi to its host plant P. tobira, information has been limited on some basic anatomical parameters of the nature of the damage to leaves and branches. The present study was, therefore, initiated to investigate the insertion and penetration of stylets into the leaves and branches of P. tobira, the length of stylets and depth of penetration in both of these tissues, and penetration of stylets into the cortex, xylem and phloem tissues and into the secretory and non-secretory canals of the leaves and branches. The results showed great variations between the leaves and branches in all the criteria observed in I. purchasi infesting P. tobira. The study found 20 whole and 23 broken mouthparts in the leaves as compared to 3 whole mouthparts and 1 broken in the branches. Length of the stylets inserted into the leaves ranged from 33.83 m to 540.93 m and into the branches from 202.85 m to 340.8 m. The stylets reached greater depths in the leaves, at 540.93 m, as compared to 498.67 m in the branches. The stylets in the leaves were associated with 12 secretory canals, but with none in the branches. It was found that three stylets reached xylem in the leaves as compared to one in the branches. Similarly, 17 stylets in the leaves reached to the phloem, but only 2 in the branches. No stylets were found in the cortex of the leaves, but one was found in the branches. In the leaves, 11 stylets reached and remained in the non-secretory canals, but none in the case of the branches.     

Lignin in woody tissues after chemical pretreatment and bacterial attack

Summary Tangential latewood sections (60 m) of Scots pine sapwood were differently treated with chlorite. The subsequently incubated two strains of Bacillus polymyxa caused a weight loss up to about 25%, including a loss of lignin of about 42%.UV-microspectrophotometry of 1 m-cross-sections prepared from the cultured woody tissues demonstrated that bacteria caused neither quantitative nor qualitative changes of the remaining lignin.The lignin, which was dissociated from the pretreated woody cell wall by bacteria, could not be respired, suggesting that the lignin is a ballast to these bacteria that inhibits the dissimilation of the carbohydrates in the wood.We appreciate the financial support by Deutsche Forschungsgemeinschaft. Thanks are due to Mrs. R. Endeward for her assistance during the microspectrophotometric evaluations and to Mr. U. Engel and Dr. O. Faix for carrying out the IR-measurements     

In vitro and ex vitro rooting of micropropagated shoots using three green ash (Fraxinus pennsylvanica) clones

Shoot multiplication using seedling materials was achieved by subculture on Murashige and Skoog salts with Gamborg's B5 vitamins (MSB5) medium containing a combination of 5 M 6-benzyladenine (BA), 5 M thidiazuron (TDZ), and 1 M indole-3-butyric acid (IBA) with three green ash (Fraxinus pennsylvanica) clones, SD1009 (South Dakota origin), SD2002 (South Dakota origin), and KA2018 (Kansas origin). Shoots were rooted using in vitro and ex vitro methods. For in vitro rooting studies, elongated shoots were transferred to rooting plugs supplied with liquid MSB5 medium containing a 3×3 factorial arrangement of two different auxins, -naphthaleneacetic acid (NAA) and IBA, at three concentrations (0, 5, and 10 M). The most effective treatment for in vitro root number, root length, and shoot height was 5 M IBA. The three clones also were tested for ex vitro rooting using a quick dip in 1 mM NAA, 1 mM IBA, or control (no auxin). The maximal ex vitro rooting response occurred when shoot explants of the three clones were dipped in 1 mM IBA. Significant clonal differences were noted in response to in vitro and ex vitro rooting treatments. Rooted plantlets were acclimated to the greenhouse.     

Mechanical relaxation processes due to sugars in cane (Arundo donax L.)

The storage modulus and the mechanical loss tangent of untreated, extracted, and sugar- impregnated canes (Arundo donax L.) were measured over a temperature range of –150° to 0°C at low frequencies. Two relaxation processes, labeled and , were detected in the ranges –60° to 0°C and –120° to –100°C, respectively. The and processes shifted to lower temperatures with increasing moisture content. The process was detected only in the canes containing sugar. The magnitude of its loss peak increased with an increase in sugar content. It was speculated that the process was due to some interactive molecular motions of the adsorbed water and sugar. The process, detected in all of the canes, was attributed to the motion of the adsorbed water in the amorphous cell wall substances.     

Canopy cover effects on nitrogen and phosphorus status in understory vegetation in oak and pine stands

The rate of change of leaf mass, N and P levels in understory vegetation at various levels of canopy cover were measured for 2 years following canopy cover manipulations in northern red oak (Quercus rubra L.) and red pine (Pinus resinosa Ait.) stands in northern Lower Michigan, USA. Canopy cover treatments consisted of clearcut, 25% (50% during first sampling year), 75%, and uncut. Leaf mass, and N and P contents were significantly higher in the clearcut treatment than in other canopy cover treatments, except for the 25% treatment in red pine stands. Leaf N concentrations in understory vegetation were also significantly higher in the clearcut (1991, 20.8mgg^–1; 1992, 22.4mgg^–1) than in the uncut treatment (1991, 16.5mgg^–1; 1992, 16.9mgg^–1). Canopy type (northern red oak and red pine) had little influence on understory nutrient status and leaf mass. In addition, fronds of bracken ferns in all canopy cover treatments in both northern red oak and pine stands were a major sink of nutrients in the understory. The results of this study showed that partial canopy removal generally had only a minor impact on understory leaf production and nutrient status compared with clearcuts during the 2-year period following canopy removal.     

Tissue culture micropropagation of Douglas-fir

A procedure was developed for plantlet production from embryos of Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco]. The Medium for Conifer Morphogenesis, used at full strength, and supplemented with 10 M benzyladenine for 17 days produced an average of 6.8 shoots on more than 90% of the embryos. The percentage of shoot-forming embryos as well as the average number of shoots per embryo varied significantly among eight seedlots. For secondary multiplication, 89% of the adventitious shoots produced axillary buds on MCM with 5 M benzyladenine. However, 0.5 M BA was more suitable for the elongation of axillaries. Rooting ranged from 0–87% depending upon the treatment. The highest percentage was obtained with a 7-week incubation in peat:perlite containing 1/5-strength medium, 1% sucrose and 2.7 M naphthaleneacetic acid, followed by 5 weeks on peat:perlite with 1/5-strength major and minor salts, full iron and organics, 1% sucrose and 0.1% charcoal.     

The distribution of lignin in sprucewood as determined by ultraviolet microscopy

The distribution of lignin in black spruce has been determined quantitatively by the study of 0.5 m transverse sections in a UV microscope. The average lignin concentration in the compound middle lamella was about twice that in the secondary wall. The lignin concentration of the middle lamella at the cell corners of adjacent tracheids was nearly four times that in the secondary wall but the volume of the secondary wall was much greater than the volume of the middle lamella. Thus, for earlywood, 72% of the total lignin was in the secondary wall leaving only 28% in the compound middle lamella and cell corner middle lamella regions. The corresponding values for latewood were 82% and 18% respectively. Use of oblique longitudinal sections of 0.1 m thick permitted the resolution of the compound middle lamella. The lignin concentration in the true middle lamella was found to be equal to that in the cell corner middle lamella and the primary wall lignin content to be about twice that in the secondary wall.

---

Zusammenfassung Die Verteilung des Lignins in Fichtenholz wurde quantitativ durch Untersuchung von 0,5 m dicken Querschnitten unter dem UV-Mikroskop bestimmt. Die mittlere Ligninkonzentration war in der Mittelschicht etwa doppelt so hoch wie in der Sekundärwand. Die Ligninkonzentration der Mittelschicht war in den an die Tracheiden anstoßenden Zellecken annähernd viermal höher als in der Sekundärwand, wogegen das Volumen der Sekundärwand wesentlich größer war als das der Mittelschicht. Dagegen befand sich beim Frühholz 72% des gesamten Lignins in der Sekundärwand und nur 28% fanden sich in der Mittelschicht selbst und in ihren Zelleckbereichen. Die entsprechenden Werte für Spätholz betragen 82% bzw. 18%. Die Anwendung von schrägen Längsschnitten von 0,1 m Dicke erlaubte die Auflösung der Mittelschicht. Die Ligninkonzentration in der Mittllamelle war gleich groß wie in der in den Zellzwickeln befindlichen Mittellamelle und der Ligningehalt der Primärwand war etwa doppelt so groß wie derjenige in der Sekundärwand.

     

Concentration and molecular weight distribution of dissolved organic carbon in a mangrove creek in the Hinchinbrook area,Australia

The concentration and molecular weight distribution of dissolved organic carbon (DOC) are reported for a mangrove creek in the Hinchinbrook area, Australia. DOC concentration ranged from 1.0mg Cl–1 near the creek mouth to 2.2mg Cl–1 at the innermost part of the creek. There was no apparent spatial trend in molecular weight distribution of DOC, with a >300gmol–1 fraction accounting for about 70% of the total in all samples. DOC concentration fluctuated between 0.5 and 1.2mg Cl–1 over one tidal cycle. The samples collected at low tide and during the rising tide were dominated by DOC of >300gmol–1 and <300gmol–1, respectively. This suggested the export of high molecular weight DOC, probably originating from litter leachates, and the import of low molecular weight DOC to the creek.     

Estimation of the biomass of fine roots and mycorrhizal fungi: a case study in a Japanese red pine (Pinus densiflora) stand

As part of a study on soil carbon flow in forest ecosystems, the biomass of fine roots (2.0mm in diameter) and root-associated fungi, including ectomycorrhizal fungi, were estimated in the summer season in 1998 at a Pinus densiflora (Japanese red pine) stand in western Japan. Fine roots of pine were classified into three categories: class I roots (0.5–2.0mm in diameter), long class II roots (long roots with diameter 0.5mm; II_L), and short class II roots (short roots with diameter 0.5mm; II_S). Total biomass of fine roots (I + II_L + II_S) at this stand was estimated to be 91.0gm^–2, about 23% of which was class II roots (II_L + II_S). Ergosterol, which is a component of fungal membranes, was analyzed to estimate the biomass of root-associated fungi in roots. In the upper soil layers (from the surface to 13.4cm in depth), ergosterol contents in the class I, II_L and II_S roots were in the ranges 43.1–82.2, 126.1–196.3 and 271.2–321.0µgg^–1 root DW, respectively. The ergosterol content was converted to fungal biomass using the median (minimum–maximum) value of ergosterol concentration reported for ectomycorrhizal fungi. Root-associated fungal biomass in this stand was estimated to be 2.0 (0.5–9.6) gm^–2. The data suggest the biomass of ectomycorrhizal fungi in the P. densiflora stand is small compared with that in other forest ecosystems.     

Micropropagation of western hemlock (Tsuga heterophylla [Raf.] Sarg.) from embryonic explants

An in vitro propagation protocol is described for western hemlock, an important forestry species in Canada. For shoot bud induction, embryonic explants were placed initially on one-third strength Schenk and Hildebrandt medium containing 5 M N⁶-benzyladenine (BA) or 5 M BA in combination with either 5 M kinetin or 5 M 2-isopentenyl adenine for 14 days. The explants were transferred to basal medium without cytokinins for 3 weeks, and then to basal medium containing 0.05% activated charcoal. Elongating shoots were subcultured every 4 weeks on charcoal medium. Shoots, 10 mm in stem height, were rooted either in agar or sterilized peat/perlite (1:1). Up to 70% of the shoots formed roots when they were transferred to the latter, moistened with 1/2 strength Gresshoff and Doy medium containing 5 M -naphthaleneacetic acid. About 90% of the plantlets survived transfer to greenhouse conditions.     

The applicability of a color acetate film for estimating photosynthetic photon flux density in a forest understory

The suitability of a color acetate film for estimating photosynthetic photon flux density (PPFD) in a forest understory was examined. The fading ratio of the film (F), the total PPFD (PPFD_total) to which the film was exposed, and the average daily maximum temperature during exposure (T) were obtained from measurements at multiple sampling points throughout an entire year within a natural secondary forest (n = 42). The ranges of the recorded values were as follows: F 35%–99%, PPFD_total 1.4–28.3molm^–2, and T 6°–32°C. PPFD_total was regressed by F and T with a high r ² (=0.94; P < 0.0001): PPFD_total = (100 – F)/(1.085 + 0.051T). The absolute error (|estimated PPFD_total – measured PPFD_total|) averaged 1.3molm^–2 with a maximum of 5.7molm^–2, indicating a good fit. These results indicated broad applicability of the film, both spatially and temporally, for estimating forest understory PPFD.