Experimental Analysis on Mechanical Properties of Corroded Stud Shear Connectors

Four series stud push-out specimens were conducted to study static mechanical behavior when stud shear connectors of composite beams were corroded. Firstly, the studs were manually rapidly corroded by electrochemical methods, and then a static load test was performed on them. Test results show that when corrosion occurs at stud rod especially close to combined surface, the ultimate bearing capacity reduces most by 18%, slip under the same load increases, and slip relative to the ultimate load reduces most by 12%. When corrosion occurs at the large end of stud, it has little effect on ultimate bearing capacity of push-out specimens, but deformation performance of stud shear connectors is affected seriously.     

GFRP肋式剪力连接件受力性能对比试验研究

剪力连接件是保证GFRP混凝土组合梁/板中两种不同材料共同工作的重要构造,设计了矩形肋和T形肋两类GFRP肋式剪力连接件,进行了3组共8个GFRP肋式剪力连接件的推出试验,包括：矩形肋开孔、T形肋开孔、T形肋不开孔3组GFRP肋式剪力连接件,得到了其破坏形态、极限承载力、荷载滑移曲线及荷载应变变化规律,重点研究肋内开孔及肋的截面形式对GFRP肋式剪力连接件受力性能的影响。试验结果表明：GFRP肋式剪力连接件的破坏形态均为混凝土劈裂破坏;对比矩形肋开孔试件,T形肋开孔试件强度高、延性好;对比T形肋不开孔试件,T形肋开孔试件强度与延性均能提高。基于试验结果,建立了考虑肋内开孔及肋截面形式影响的GFRP肋式剪力连接件极限承载力计算公式,拟合得到了GFRP肋式剪力连接件的荷载滑移曲线上升段的理论模型,建立了其抗剪刚度计算公式。     

Experimental Study on Flexural Behavior of Reinforced Concrete Beams Strengthened With Ferrocement Mortar

Experimental research on flexural behavior of the different grade RC beams strengthened with ferrocement mortar through six RC beams is carried out. The matching of original component concrete to the composite mortar strength rank is studied and its influence on bending strength, the crack-resisting capacity and the bending stiffness of RC beams is analyzed. Based on plane cross-section assumption and the experimental results, the formulas of the theoretical ultimate strength capacity and stiffness are brought forward. The calculated results fit well with the experimental results, to provide a theoretical reference for actual engineering designs.     

Mechanical Model of Steel Plate Composite Shear Walls

Based on concepts of mechanics, a mechanical model of novel type of steel plate composite shear wall is presented. The novel type of structure is formed by steel plate shear wall and T-shaped solid-web composite columns. Flexural stiffness of steel beams, lateral stiffness of the T-shaped solid-web composite columns, shear stiffness of steel plate composite shear wall and shear stiffness of beam-column connection are taken into account in the mechanical model. And the equivalent damping between steel plate and boundary is considered. Based on the deformation features of structures and the calculation hypothesis, the lateral stiffness model and the energy dissipation model of structures are developed. Meanwhile, the calculation equations of elastic ultimate and plastic ultimate of shear strength of structures are set up. The theoretical analysis results inosculate better with the results of experiment. The comparison between the result calculated from the formula and the experimental result shows that the calculation precision is high enough to meet the demand of theoretical analysis. The difference, including equivalent model, stress states, manufacturing defect and installation error, between the formula and the experiment has been further discussed.     

Finite Element Analysis of the Influence of Steel Strength on Beam-to-column Composite Connections

Because high material strength and composite load-bearing are emphasized in constructing members for high-rise steel frame structures, in a composite connection, steel strength has a dramatic influence on both the bearing performance and the composite action of the concrete slab. Based on a finite element analysis, we discuss the composite effect and the connection breaking mode, focusing on the performance change of the composite effect in adopting high strength steel. It can be found from the results that, along with the improvement of the steel strength, the elastic and plastic ultimate strength of the composite connection will increase, the ductility will decrease to a certain extent, and the composite effect of the concrete slab will diminish. The collapse of the concrete in a positive moment side contacting the column flange is viewed as the limiting state of the connection.     

Spatial Calculation Methods of Three Main Trusses Continuous Plate truss Composite Bridge

According to the structural features of three main trusses continuous plate truss composite bridge, two composite beam methods are presented by constructing the displacement mode of composite beam elements and deriving the stiffness matrix of composite beam elements. The characteristic of composite beam method one is that the bridge slab is taken as the top flange of the chord of main truss and combined with the chord of main truss to form a steel concrete composite beam; the characteristic of composite beam method two is that the bridge slab is taken as the top flange of longitudinal and traverse beam and form a steel concrete composite beam with longitudinal and traverse beams. And as for the conventional plate beam composite method, the slab is characterized by forming bridge slab system with continuous isotropic sheets and longitudinal and traverse beams to bear load. Also, the comparison between theoretical results and experimental ones verifies the effectiveness of the above three methods.     

考虑滑移和剪切变形的单箱双室组合箱梁剪力滞效应

为准确分析单箱双室组合箱梁的剪力滞效应,考虑钢混凝土的界面滑移效应和钢腹板的剪切变形,针对顶底板和翼板定义不同的剪力滞翘曲位移函数,基于能量变分法推导出单箱双室组合箱梁剪滞效应的控制微分方程及其闭合解。以单箱双室组合箱梁算例为基础,利用该方法分析其剪力滞效应的规律,结果表明：在同时考虑滑移和剪切变形时,组合箱梁的挠度比初等梁理论解大,且其挠度随界面滑移刚度的增大而减小;组合箱梁在均布荷载作用下,滑移量与荷载值近似成正比关系;在相同条件下,钢箱梁底板的剪力滞效应较混凝土顶板显著。     

钢筋混凝土无腹筋细长梁剪切破坏机理模型研究综述

根据现有关于钢筋混凝土无腹筋细长梁剪切破坏机理问题的研究成果,介绍了基于修正压力场理论的抗剪模型、临界剪切裂缝理论、塑性理论、压力路径理论、劈裂破坏理论和基于截面应变分析的抗剪模型的基本假设、核心观点及受剪承载力计算方法,并给出总结、归纳及评析;另一方面,利用相关试验数据和ACI-DAfStb无腹筋细长梁剪切破坏数据库,分别对不同理论模型的受剪承载力计算公式进行了设计参数的影响评估和统计评估;并展望了无腹筋细长梁剪切破坏机理研究的发展方向。研究结果表明：不同理论模型的部分假设缺少直接的试验依据支持,梁腹混凝土的受拉（劈裂）或受剪（骨料咬合）以及受压区混凝土对抵抗剪力的贡献成为抗剪机制的主要分歧;不同受剪承载力计算公式对不同影响因素的考虑方式的合理性和计算结果的准确度均有待进一步提高。后续深入研究应综合考虑剪切破坏问题的随机性和物理属性,利用先进测试技术、应力演化分析方法,进一步揭示剪切破坏机理。     

Failure Mechanism and Mechanical Properties of CFRP Strengthened Super-servicing Reinforced Concrete Poles

Super-servicing reinforced concrete poles (RCP) which come from a road section in a power grid, including six pole shafts and six specimens with a mid-span steel joint, were selected as samples to conduct a flexural strength test, in which three shafts and three poles with steel joint in the middle span were strengthened by CFRP in the longitudinal direction. The mechanical behavior and failure mechanism under different CFRP layers pasted were comparatively studied. Based on the measured test data, the calculation methods of strength and stiffness were investigated, and the mathematical expression of stiffness degradation mechanism was proposed. The result shows that the final failure mode of CFRP strengthened poles is the local bond failure between CFRP material and the external concrete, and the longitudinal CFRP is snapped. The process of damage is rapid and brittleness. The mean strain of cross-section is in accord with the assumption of plane cross-section. The strength degradation of shaft specimens without strengthened is throughly serious. As for the strengthened poles, the bearing capacity and stiffness under each forcing stage are improved with different levels. The damage of strengthened specimens develops faster and more intensive than that of none-strengthened ones. When multi-aspects are synthetically considered, there is a suggestion that double layers of CFRP should be pasted along the longitudinal in the joint of the site within a certain distance, and the single layer of CFRP should be adopted in the shaft.     

Calculation Method of Shear Behavior of Hybrid Fiber Reinforced High Performance Concrete Deep Beams

The static tests on hybrid fiber (steel fiber and polypropylene fiber) reinforced high performance concrete deep beams according to the orthogonal experimental design were conducted. The shear capacity and calculation method of deep beams were discussed as well. The contributory factors such as the characteristic parameters of steel fiber (types, volume fraction, aspect ratio), the volume fraction of polypropylene fiber, the ratio of web horizontal reinforcement and the ratio of web vertical reinforcement were analyzed. Results show that the shear failure mode of deep beams is changed with adding a reasonable volume of hybrid fibers, and hybrid fiber can greatly increase the diagonal cracking strength and shear strength of HPC deep beams. The diagonal cracking strength is increased by 45.2% averagely while the shear strength is increased by 25.6% averagely. A satisfied result is obtained when the plasticity theory is used to analyze shear behavior of hybrid fiber reinforced HPC deep beams. The contribution of web horizontal reinforcement and web vertical reinforcement to shear strength of deep beams is not obvious but the former plays a major role. After analyzing the strengthening mechanism of hybrid fiber, a formula to calculate the shear capacity of hybrid fiber reinforced HPC deep beams is presented based on spatial strut-and-tie mode and splitting failure.     

新型组合梁板连接中板的抗弯性能

在高层建筑结构设计中,由于上部荷载较大或梁的跨度较大,使得梁的截面高度较高,通常会影响建筑的有效层高和建筑的总体高度。为了减小各层梁板结构高度,有效增大各层净高,提出了一种钢箱梁嵌入现浇板的新型组合梁板连接方式。针对这种新型连接方式,对6个钢箱梁混凝土板组合连接区域进行了板承受支座负弯矩的单调加载试验,对比分析了采用钢箱梁嵌入混凝土板组合楼盖与传统栓钉连接组合楼盖中板抵抗支座负弯矩的性能差异;并利用ABAQUS对试件进行了有限元分析。试验与有限元分析结果表明：采用钢箱梁嵌入板连接组合方式,其混凝土板抵抗支座负弯矩的能力与传统连接方式板抵抗支座负弯矩能力没有明显差异。     

T形板肋对预制带肋底板混凝土叠合板弯曲疲劳性能的影响

为研究T形板肋对预制带肋底板混凝土叠合板弯曲疲劳性能的影响,对3块T形肋底板叠合板和1块整浇板进行弯曲疲劳性能对比试验,主要考察T形板肋与疲劳荷载幅值对试件疲劳破坏形态及疲劳损伤程度的影响,得到了在不同疲劳循环加载次数下的跨中动位移、混凝土应变、预应力筋应变、残余变形等,分析了在不同疲劳循环加载次数下的刚度退化情况、荷载-应变分布规律、裂缝分布规律及剩余承载力等。研究结果表明,经历200万次疲劳循环加载后,T形肋底板叠合板无明显的刚度和强度退化,增设T形板肋的叠合板能达到与整浇板相同的弯曲疲劳性能;T形肋底板叠合板正截面弯曲疲劳强度计算可采用普通预应力混凝土受弯构件正截面疲劳应力验算的4个假定,最终以此建立了其正截面弯曲疲劳强度验算方法。     

Experimental analysis of strengthening effect of corroded reinforced concrete beams strengthened with bolted steel plates

In order to study the mechanical behavior of corroded reinforced concrete beams strengthened with bolted steel plates, this paper designed 12 reinforced concrete beams. These beams were corroded by using accelerated electrochemical corrosion method with a designed corrosion ratio of 10%. The pre-compression experiments were performed for all RC beams before strengthening and the maximum crack width was controlled as 0.2 mm. According to the thickness of concrete cover, the beams were divided into 3 groups. Each group was composed of one comparative beam and three tested beams strengthened by steel plates bolted with study according to the thickness of steel plates which were 3 mm, 4 mm and 5 mm, respectively. It was shown that the strain distributions along the height of the strengthened beams at middle-span were in good agreement with the plain section assumption basically. The serviceability performances of corroded RC beams were significantly improved and these ultimate bearing capacities increased obviously. The steel plate bolted with stud effectively reduced the crack width and the extension height of reinforced concrete beams. It was indicated that an increase of steel plates with 35 mm resulted in a decrease of deflection by 13%51% when beams had the same thickness of concrete cover and corrosion ratio. Influence of the thickness of concrete cover on the ultimate bearing capacity was not obvious.     

近爆作用下压型钢板组合楼板动力响应及影响因素数值分析

利用有限元软件ANSYS/LS-DYNA,采用流固耦合的计算方法,对压型钢板组合楼板在近爆炸荷载作用下进行了不同工况的数值模拟,得出其受力形态,分析其动力响应及破坏过程,找出影响楼板动力响应的主要因素。数值分析结果表明：适当增加混凝土厚度和提高压型钢板强度,可以显著降低组合楼板的跨中最大位移,提高组合楼板的延性和抗爆性能;组合楼板中钢筋间距的变化,对组合楼板抗爆性能影响较小。     

Experimental Research on Steel Tube Confined Concrete Column Ring Beam Joint with Shear Ring under Direct Shear

In this paper,through direct shear tests on 3 steel tube confined concrete column ring beam joints with shear ring,the ultimate capacity,the mechanical mechanism,the sliding of ring beam relative to steel tube and the ultimate failure mode of ring beam were analyzed.The results showed that the ultimate failure mode and the calculation of capacity of ring beam joint awaited further tests and analysis.     

钢砼组合结构PBH剪力键的疲劳性能

为了研究钢箱-砼组合结构中PBH剪力键在反复荷载作用下的疲劳性能,设计制作了PBH剪力键试验模型,进行了24万次疲劳推出试验。在疲劳破坏形态和试验滑移及应变数据分析的基础上,利用数值工具开展肋板开孔孔径、穿入钢筋直径、混凝土强度3个参数的PBH剪力键疲劳寿命影响因素分析。研究表明：PBH剪力键的疲劳破坏形态与静载破坏相似,表观表现为混凝土面多处斜向劈裂裂缝、内部榫孔混凝土压碎、穿入钢筋局部屈服;疲劳破坏演化过程分为疲劳损伤开始、发展、破坏3个阶段,其中疲劳发展阶段占整个疲劳阶段的91.7%,结构刚度在疲劳损伤开始和发展阶段退化较慢,在疲劳破坏阶段退化较快;肋板开孔孔径、穿入钢筋直径、混凝土强度3个参数对PBH剪力键疲劳寿命影响均有明显影响,其中穿入钢筋直径对疲劳寿命的影响尤为突出。     

Finite Element Analysis of Shear Behavior of Super High Strength Reinforced Concrete Beam

On the basis of testing results of shear behavior from 18 super high strength reinforced concrete restrained beams with web reinforcement, with the cube compressive strength ranging from over 100Mpa, in this paper, the nonlinear finite element analysis procedure was formulated and the analysis of the specimen tests was carried out with the parameters obtained from the experiments and improved constitutive model and failure criteria of materials. Based on the simulated shear resistance test results and practical measured data of eighteen super high strength concrete restrained beams under point load, the equation to compute the shear resistance capacity of such beams was thus obtained by regression. The analytical results agree well with those of experiments.     

Effect of Varying Longitudinal Reinforcement Ratios on Shear Behavior of Reinforced Concrete Beams Without Web Reinforcement

Effect of varying longitudinal reinforcement ratios on shear behavior of reinforced concrete simply supported beams without web reinforcement was analyzed in this paper, with emphasis on both shear ultimate capacity and failure mode, on the basis of available testing data. Generic laws were thus obtained and codified methods, including ACI Code and China Design Code of Reinforced Concrete Structures, were evaluated as a result.     

Measurement and Analysis of Prestressed Concrete Flat Beam- Waffle Slab System During Prestressing

During the pre - stressing of the unbonded prestressed concrete wide flat beam - waffle slab system, the displacements and strains of slab and the prestressed concrete beams were site - measured and the results were analyzed. The prestressing construction was simulated by finite element program. The prestressing efficiency of the unbonded prestressed concrete wide flat beam - waffle slab system was discussed. It indicates that the prestressing efficiency was affected by the in -plane stiffness of slab.     

Experimental Analysis on the Mechanical Properties of Concrete Composite Slabs with Precast Prestressed Rectangular Rib Panels

For the convenience of industrialized production and site operation,specification design of PPCRP (precast prestressed concrete ribbed panels) is discussed. In order to obtain ultimate bearing capacity,bending rigidity and crack resistance,four PPCRP with two types of spans are studied,and the results show that PPCRP can satisfy the requirements of bearing capacity in construction phase and can serve as stay-in place formwork. To verify the mechanical property,shear behavior on contact interface of composite member and moment redistribution factor of continuous composite member,two single-span composite members and one two-span continuous composite member are studied. It is indicated that computational method for bearing capacity of composite member can be the same as cast-in-situ concrete slab. Besides,section strain analysis for composite member in two-loading is conducted,which suggests that thickness of bottom board can be used as calculated height with the consideration of two-loading.