Control Method of Single-phase APF

As one-cycle controlled single-phase active power filter(APF) only can compensate harmonics and reactive currents simultaneously,this paper detects circuit based on instantaneous reactive theory and current traces control circuit based on one-cycle control with harmonic current.The control equations and circuit are set up.The results of simulation verify that this scheme is effective and APFs can compensate harmonic and reactive current according to requirement with the distorted source voltages.     

Integrate Reset Controlled Three Phase Power Factor Correction

A three phase power factor corrector in continuous current mode is introduced. The control equations are deduced and realized by Integrate reset controller. The integrate reset controller is composed of a integration with reset,a RS flip-flop and a comparator,which is very simple. The integrate reset controlled three phase power factor corrector has these characteristics as follows: Constant frequency operation, which is of advantage of the design of filter;the control circuit is simple and no need for multiplier;The result of simulation proves the correction of theory analysis.     

A Integrate-Reset-Controlled Single Phase Power Factor Correction with High Efficiency

A novel single phase boost type power factor correction circuit is introduced .The converter's efficiency is greatly improved by improving on the traditional boost type power factor correction circuit. Integrate Reset Control circuit is adopted to realize unity power factor. The Integrate Reset Control high efficiency single phase boost type power factor corrector has these characteristics as follows: It's constant frequency operation, which is of advantage of the design of filter. The control circuit is very simple and no need for multiplier. The result is quiet perfect, the input current follows the input voltage very well. The efficiency is very high. The result of simulation and experiment proves the correction of theory analysis.     

One-cycle Technique Based Adjustable Ac Source

By using one-cycle control theory, a novel voltage source inverter is proposed. The conventional one-cycle control technique needs that the integrator is reset instantaneously. But it is very difficult to realize with hardware due to the finite time constant of the reset circuitry. Therefore, based on the one-cycle technique, the paper gives a new control scheme to resolve the problem with dual switched integrator, and the performance of the integrators is close to ideal. The paper also uses the dc offset to implement the voltage measurement. Furthermore, the amplitude and frequency of the output voltage are effectively adjustable. The one-cycle control technique not only provides fast dynamic response, but also can admirably suppress the perturbation yielded by dc source and abate the undesired harmonic contents. Simulation studies were performed to prove the proposed scheme. The results show that the one-cycle control based voltage source inverter makes good use of dc source that is 92.8% and THD is only O. 255 9%.     

Parameter design and simulation for animproved direct current side active power filter

Considering the characteristics of the dc side series active power filter (APF) that the output voltage cannot be adjusted and the control circuit is complex , an improved single phase dc series APF topology is proposed. The improvement of the new circuit topology and fundamental working principle are analyzed. Following the circuit power factor pre regulator principle, the designing method for the main circuit parameters is given. The voltage ring and the current ring are designed by using the zero pole method. The main circuit power switch is controlled with the same frequencies, while the control circuit was simplified further. Compared with the paralleled APF, the main circuit of topology structure is simplified and the number of the active switches is reduced, which show low input current harmonics, high power factor, large voltage output adjustment range and low cost. The simulation results prove that the proposed topology is correct and reliable.     

Novel Single-phase Series Active Power Filter with Power Equilibrium

Grounded on the theory of power equilibrium, a novel single phase series active power filter (APF) is proposed . By analyzing the power equilibrium character of series APF, the control algorithm and equation are deduced. In the proposed control strategy, instead of the fundamental current detection and complex computation, only the capacitance voltage and the source current on d.c. side are needed. The clear control loop has been realized with simple circuit and the series proposed APF can compensate both reactive and harmonic current simultaneously. The simulation results show the excellent compensation effect and confirm the validity of theoretical analysis.     

Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

The power-supply of X-ray machine adopting PID control and high-frequency inverter technology

To solve the problem of low control accuracy and low stability of current X-ray machines, a kind of digital power supply for X-ray machine is introduced. In the digital power supply, some key technologies are used to improve the output stability of the high frequency inverter, including improved BUCK circuit for voltage regulating circuit, high frequency inverter and soft switching technology for the high-voltage generator. The PWM control technology is used to control the switch transistor of voltage regulating circuit and inverter circuit, which makes the drive waveform output stable and easy to control. In order to improve the control accuracy, reduce the volume and change high voltage consecutively, the software PID of the microcomputer is used to control the feedback circuit. The high-accuracy power chip is used for the filament power supply to make the filament electric current stable. Through the analysis of the circuit, the parameters of the circuit are calculated and the circuit is simulated by PSPICE software. The results show that the theoretical analysis is consistent with the practical simulation results. The design can meet the requirement of the technology indices of the power supply of the X-ray machines.     

Fault Detection Techniques for Feeder Automation

Fault detection of the distribution systems is one of the key techniques for feeder automation. At all times, it is still very difficult for the exact detection of single phase to ground fault. First of all, the distinguishing rules of the faulted phase are presented when ground fault occurs in distribution systems. This paper analyzes the fault detection technique for single phase to ground in system with floating neutral point. Based on faulted phase's current, a method realizing ground fault protection is proposed and the algorithm model of action criterion is given out. The simulation results show that the method will be with very good selectivity to ground fault, and it can be used preferably in feeder automation. The detection method for short circuit fault is also introduced simply.     

Passive Lossless Forward Converter with Current Double Rectifier

To reset transformer excitation flux reliably,reduce the switching losses and improve influence of EMI noises in high frequency forward converters,several kinds of methods have been proposed,including RCD snubbers,active snubbersand resonant converters,and so on.These methods have many shortages.In consideration of these shortages,this paper puts forward a passive lossless forward converter with current double rectifier(CDR).The circuit does not require an extra switch or additional control circuit,and can resets the transformer excitation flux reliably,and does not include lossy components.So the circuit has higher reliability and higher performance/price ratios than above several kinds of methods. The paper analyzes the frame and operating principle of main circuit in detail.The key parameters design principles of the circuit are given.The simulation results confirm validity of the theoretical analysis results.     

simulation of a brushless direct current motor based on finite state machine theory

A novel method simulating a brushless direct current(DC) motor was presented, based on principles of hybrid system modeling and finite state machine theory. Brushless DC motor control mainly focuses on controlling the on/off condition and power switch duration. Modes of control therefore can be defined by corresponding states, and the states can be combined as a finite state machine. This approach uses the popular Simulink/Stateflow simulation method to control brushless DC motor loops. A three phase brushless DC motor was analyzed to illustrate the process of model building with Simulink/Stateflow. The analysis demonstrates the feasibility and validity of the proposed method.     

Dual mode AC DC AC converter for contactless power transfer system

A new type AC DC AC converter which can work in Buck or Boost mode is proposed in order to overcome the deficiencies of the primary circuit of the traditional contactless power transfer system. Through switching this two modes and turning the duty cycles of the switches, not only the resonant current amplitude of the primary resonant current can be controlled to be constant against a wide range variation of input voltage, but also the problems, such as surge current, high cost, complex control etc., caused by the DC filter and DC/DC converter in a traditional CPT system are effectively eliminated. The topology and operation principle of the proposed converter have been analyzed. The corresponding control strategy has been presented and verified by simulation results.     

Adaptive Iterative Learning Control of Nonlinear Systems with Unknown Control Direction

An adaptive iterative learning control scheme is proposed for a class of mismatched nonlinear systems with periodic uncertainties and unknown control directions. The control algorithm has the following three features;the control method does not need control direction information; the periodic uncertainties are learned online by a learning control method; and the algorithm can deal with mismatched uncertainties. The proposed method can achieve asymptotical convergence along a learning repetition horizon. A simulation example is provided can demonstrate the effectiveness and feasibility of the control strategy.     

Modeling and Simulation of the Doubly Fed Generatorwith the Matrix AC-AC Converter as an Exciter

According to the space vector modulation method of the AC DC AC converter,the switch control scheme of the matrix AC AC converter is deduced,and the model of a three phase matrix AC AC converter is constructed. According to the mathematic model of the doubly fed generator and the excitation control principle based on dynamical synchronous reference frame,the simulation model of the generator and excitation controller are established,then the modeling and simulation of the doubly fed generator system with the matrix AC AC converter as an exciter are implemented.The steady state and transient characteristics of the system are simulated,the harmonics of the EMF and stator?rotor current are researched.     

Power-theft-preventing Technology for Three-phase Three-element Active Electric Power Meter

Although nowadays there are many electric power measuring methods in china,some of them still have many power theft preventing bugs.To measure big and middle consumers' electric power consumption ,it is hard to prevent consumers from stealing power energy by the means of current which is difficult to be checked up by relevant products and preventing stealing power energy technology, because of using CTs to converting current.The authors especially use the example of the three phase three element active electric power meter, analyses other power theft methods and summarizes the new preventing stealing power energy technology. In accordance with the characteristic of the power measuring and on the basis of the analyzing the right method of resolving the problem,the three phase four wire system power theft preventing device can detect all sorts of stealing ,especially to the stealing by the means of current in time and accutately.This device has acquired good effect in the application of power system.     

Design of converter of DC-AC type contactless power transfer system

A new type of circuit topology for DC-AC type contactless power transfer(CPT) system is proposed, and the asymmetric DC-AC convert is used to imply the new topology. The topology simplifies the circuit and control of DC-AC type CPT system, reduces the power loss of power conversion of secondary circuit, and improves the overall efficiency and power density of the system. This paper presents the topology of the converter and investigated its control strategy. A model of the system has been derived, with which the system is simulated and studied. The measured experimental results have verified the theoretical and simulation results.     

HIGH SPEED CALCULATIONS OF SHORT CIRCUIT FOR POWER SYSTEMS WITH VARIABLE STRUCTURES AND PARAMETERS

This paper presents a new method for digital simulation of equivalent circuit parameters and port currents of the short circuit fault port for each sequence networks in power systems with variable configuration and parameters. If the electric values for single-line-to-ground short ciruit are calculated in detail,the other faults at the same location can be rapidly obtained by using the proportional coefficients of the same sequence port current. In this method,the modifications of Z-bus or Y-bus matrices for each sequence network, and the repeated of calculations of the short circuit calculation have been completly avoided.     

A Control Algorithm to Regulate the Active and Reactive Power and Simulation Research of Dual-frequency Dual-Buck Inverter

This paper deduceS the control algorithm ,which can both regulate the active and reactive power of the novel dual-frequency dual-Buck inverter, and the control function. The control function based on one cycle control can control the AC-side active and reactive power by simple circuit. The simulation is given and the results prove the validity of the theory analysis. This inverter is valuable for the research of grid-connected inverters.     

Power transfer regulation mode for current fed CPT system

For the drawback of the power regulation in the existing current fed CPT system, a novel circuit topology and control method is presented, which can realize either Buck or Boost mode and can extend the power regulation scope. The improved topology is modeled, while the relations between the duty cycle and the output power for the two modes are derived for system analysis and design. Simulink and PLECS are used to simulate the PP type CPT system. The simulation results prove the theory analysis.     

Calculation of lumped parameter of two-port network forvolume conduction energy transfer

Skin electrode unit is a channel through which energy can be transferred to the implanted device by volume conduction. The unit can be equivalent to lumped circuit, but so far there are no appropriate calculation methods of these circuit parameters, so variable load method based on field-circuit coupled is proposed. A skin electrode unit field circuit coupled model is established to obtain the relationship of the network parameters between voltage and current at electrode port, and the amplitude and phase of the power signal is extracted by the use of all phase FFT spectrum analysis. On this basis, equivalent circuit impedance parameters of the skin electrode unit under various conditions are obtained by the application of variable load method and the validity of the method is verified. As a result, the equivalent circuit impedance parameters obtained in this way can be used for the circuit analysis and optimization of the volume conduction energy transfer system.