共查询到20条相似文献,搜索用时 31 毫秒
1.
Based on experimentthatal results,we conclude that confinement in regional confined concrete(RCC) columns is more efficient than that in normal confined concrete(NCC) columns.As loads increase,NCC column sections tend to become round;the corner concrete in the core area may break;and,the strains of external stirrups tend to drop slightly after the peak load.RCC columns,however,remained thoroughly rectangular and the stirrup strain increased steadily.The failure mode of RCC columns was totally different from that of NCC columns.While NCC columns tended to fail in shear,followed b a rapid drop in load carrying capacity,the RCC columns developed gaps in their midsections and the columns separated into several slender columns.After a long deformation period,the RCC columns retained approximately 40% of their load carrying capacity.It can be expected that this characteristic may benefit the anti-seismic capacity of structures. 相似文献
2.
Based on the test of high strength concrete (HSC)short columns confined with stirrups 8 under axial loads and 6 under small eccentric loads, the influence of stirrups confinement on stressstrain relationship and related parameter under monoaxial compression are studied, and the effect of the type of stirrups, stirrup ratio, etc. on the HSC columns ductility is analysed. Besides, the strength and deformation behavior of HCS columns under small eccentric compression are explored.Based on the experimental study, the complete stress-strain curves of confined HSC and the formula for calculating the related parameter are presented in this paper. 相似文献
3.
Guo Xianhu 《保鲜与加工》1989,(3)
By introducing the span-to-height ratio,this paper deduces wo evaluating equations of shear strength of simple reinforced concrete beamwith stirrups and under uniform loads.This makes the shear stressing concept
consistent with the evaluating equations,thus improves the evaluating equationsof shear strength of the New Code.Two equations are provided with auto-regulating function on shear strength for a cross section of beam.They
aresimple and convenient in evaluation.The working time used for design is not increased and 10% of stirrups is economized in frequent conditions of span-to-height ratio. 相似文献
4.
The active confinement for the core concrete can be provided by lateral pre-tensioned FRP, the stress hysteresis of FRP can be avoided, and good confinement effect for concrete columns can be got. It must cause large error if adopt the calculated model and constitute model of concrete columns confined with non-pretentioned FRP. The initial confined stress and effective confined stress associated with the lateral pre-stress were introduced. According to the test results and finite element simulation, the calculated model on peak stress, peak strain, ultimate stress and ultimate strain of circular concrete columns confined with lateral pre-tensioned FRP were proposed, and the initial elastic modulus of circular concrete columns confined with lateral pre-tensioned FRP was analyzed. Based the exiting stress-strain models of circular concrete columns confined with FRP, the three linear stress-strain model of circular concrete columns confined with lateral pre-tensioned FRP was recommended, and good agreement between theoretical and test results is achieved. 相似文献
5.
Super-servicing reinforced concrete poles (RCP) which come from a road section in a power grid, including six pole shafts and six specimens with a mid-span steel joint, were selected as samples to conduct a flexural strength test, in which three shafts and three poles with steel joint in the middle span were strengthened by CFRP in the longitudinal direction. The mechanical behavior and failure mechanism under different CFRP layers pasted were comparatively studied. Based on the measured test data, the calculation methods of strength and stiffness were investigated, and the mathematical expression of stiffness degradation mechanism was proposed. The result shows that the final failure mode of CFRP strengthened poles is the local bond failure between CFRP material and the external concrete, and the longitudinal CFRP is snapped. The process of damage is rapid and brittleness. The mean strain of cross-section is in accord with the assumption of plane cross-section. The strength degradation of shaft specimens without strengthened is throughly serious. As for the strengthened poles, the bearing capacity and stiffness under each forcing stage are improved with different levels. The damage of strengthened specimens develops faster and more intensive than that of none-strengthened ones. When multi-aspects are synthetically considered, there is a suggestion that double layers of CFRP should be pasted along the longitudinal in the joint of the site within a certain distance, and the single layer of CFRP should be adopted in the shaft. 相似文献
6.
Bai Shaoliang Zhu Xijun 《保鲜与加工》1990,(1)
In this pager, four full-scale corner joint assemblies of reinforced concrete frame beam and column with different detail structure are tested under low cycle loading, The process of damage development and the characteristics of break of the assemblies in the course of alternately increasing positive and negative bending deformation are learned Strength, stiffness and ductility of assemblies and the various regulations of energy consumption are also studied. Compared with these properties, the anti-seismic behavior is tentatively commented. Besides, the test results of the strain distribution of beam and column longitudinal bars and stress state of joint stirrups are analyzed. 相似文献
7.
8.
通过对1片钢筋混凝土剪力墙和4片配有碳纤维增强聚合物(CFRP)筋的剪力墙的低周反复荷载试验,在分析试验中测得的裂缝宽度、裂缝的发展和分布形态、侧向变形的基础上,研究了在钢筋混凝土剪力墙的适当位置部分或全部配置CFRP筋对剪力墙的残余裂缝和残余变形等自复位性能的影响规律。研究结果表明:与普通钢筋混凝土剪力墙相比,配有CFRP筋的剪力墙的开裂荷载较低,裂缝较多,裂缝分布分布范围较广,墙体的最大裂缝宽度、残余裂缝宽度和侧向残余变形分别降低了60%、70%和90%,说明在剪力墙中合理配置CFRP筋能使剪力墙具有优异的自复位性能。 相似文献
9.
Weak interfaces may be induced during the process of substituting the damaged cover by corroded RC beams or strengthening directly with CFRP. The two possible causes are the combination between the new-old concrete and expansive cracks. In this study, nine strengthened beams were designed to investigate the effects of weak interface on CFRP debonding along with the effectiveness of conventional confinement provided by U-strips. The test results showed the structural integrity of strengthening system was impaired considerably by both types of weak interfaces. Furthermore, it easily led to CFRP debonding failure. Weaker the interface was, the less ability transfer shear forces are. Debonding failure could be effectively prevented by U-strips. Meanwhile, consequently flexural CFRP sheets performed mainly well. However, local cover delamination and premature rupture of flexural CFRP may still occur due to the effects of the weak interface. Therefore, the allowable tensile strain of flexural CFRP must be reduced, and stricter measures of confinement and anchorage must be taken in application. 相似文献
10.
Nonlinear characteristic of servo value is the important factor influencing hydraulic system, the model of electro-hydraulic servo pressure control system is designed. In this model, flux-equation of servo valve is specially applied and some non-linear characteristics are considered. Furthermore, SIMULINK toolbox of MATLAB language software is applied to solve mathematic model and simulation curves of some variables are obtained. The calculation results are in good agreement with the experimental results. 相似文献
11.
表层嵌贴预应力FRP板条加固钢筋混凝土结构技术可充分发挥FRP材料强度,且不需设置永久锚具,具有较大的潜力。以试验得到的嵌贴FRP混凝土粘结滑移关系为基础,建立了嵌贴预应力CFRP板条与混凝土的粘结应力微分方程,并根据边界条件推导了方程的解析解,得到了嵌贴预应力CFRP板条放张后界面粘结应力、CFRP拉伸应力的分析模型。与试验结果的比较表明,该模型得出的界面粘结应力及CFRP拉伸应力与试验结果吻合较好。在此基础上,考虑放张后CFRP混凝土界面不出现剥离的条件,分析了粘结界面能抵抗的最大容许预应力。 相似文献
12.
在梁侧或梁底用波形齿横向张拉CFRP片材并锚固的体外预应力加固混凝土结构技术,对3根完全相同的7 m跨T形截面梁进行加固:其中2根梁侧面加固;1根梁底部加固。试验表明:多点锚固体外无粘结CFRP预应力可以依据构件的弯矩来调整各段的加固量从而更有效的利用CFRP材料的高强性能;梁底与梁侧加固对提高构件的抗弯刚度差别不大;波形齿能彻底解决预应力CFRP片材的锚固问题。以该3根加固梁的试验结果为基础,提出了梁体极限状态下塑性绞区长度的体外无粘结预应力碳纤维加固受弯构件的抗弯承载力公式,以及考虑二次效应的有效惯性矩法的挠曲变形的计算公式,通过与试验值的对比分析可知,所提出的方法可供设计参考使用。 相似文献
13.
The buried box girders in the mountain city sewage pipeline system would be turned into simple-supported girders because of the removal of the foundation caused by landslide.This change of supporting would result in the failure risk of pipeline structure.The static properties of the buried box girders with small depth-to-span ratio in simple-supported condition are experimentally analyzed.The failure pattern,shear behavior and shear lag effect of the buried box girders in simple-supported condition are studied.The shortages in the present design codes for the calculation of shear capacities of the box girders are also discussed.It is shown that under the vertical uniformly distributed load,the crack distribution of the box girders is uniform,and no major critical diagonal crack is formed,and the box girders lose the bearing capacity in the form of concrete diagonal rod crushing.As the main shear-bearing components,the stirrups devote much to shear capacity of the box girder after concrete cracking.The strains of the longitudinal rebars are affected by those factors such as the redistribution of internal force and cracks,so only few areas of the box girders show the shear lag effect.The change of supporting form leads to the premature cracking of concrete and affects the serviceability of the sewage pipeline. 相似文献
14.
The mechnical characteristics of concrete is sensitive to the strain rate and it is crucial to consider the effect of load rates on the behavior of reinforced concrete (RC) structures subjected to dynamic loads such as severe earthquakes. In this study, numerical simulations on the dynamic behavior of typical RC column specimens under dynamic loadings with different load rates were performed. Concrete constitutive model considering the strain rate effects proposed by the CEB code was employed with a fiber model to characterize the nonlinear strain rate dependent behavior of RC columns. The developed dynamic fiber element model was validated by comparing the simulated results of four RC column specimens with the fast loading test results. Results show that the developed fiber element model can predict the behavior of RC columns with acceptable accuracy. After valiating the proposed fiber elemen model considering the strain rate effect, the load carrying capacity of different RC columns with various longitudinal reinforcement ratios and volumetric stirrup ratios were simulated. Results show that the trends of the influences of longitudinal reinforcement ratios and volumetric stirrup ratios on the load carrying capacity of the RC columns under dynamic loadings are different. 相似文献
15.
方形高强钢管混凝土叠合柱轴压极限承载力分析 总被引:1,自引:0,他引:1
对于新提出的方形高强钢管混凝土叠合柱的极限承载力,基于统一强度理论,考虑中间主应力和材料拉压比的影响,引入有效约束系数和非有效约束系数并考虑箍筋对钢管外混凝土约束作用的不同,把钢管外箍筋约束混凝土划分为有效约束区和非有效约束区,将方形截面等效为圆形截面以考虑钢管核心混凝土受到的钢管和外围钢筋混凝土的双重约束效应,提出了方形高强钢管混凝土叠合柱的一种新的轴压极限承载力计算方法。将所得理论计算结果与文献试验结果进行对比,吻合良好,证明了公式的正确性。对各参数的影响规律分析表明,方形高强钢管混凝土叠合柱的承载力随着侧压系数、中间主应力影响系数、材料拉压比和纵向配筋率的增大而增大,随着钢管径厚比的增大而减小。 相似文献
16.
In order to study the mechanical behavior of corroded reinforced concrete beams strengthened with bolted steel plates, this paper designed 12 reinforced concrete beams. These beams were corroded by using accelerated electrochemical corrosion method with a designed corrosion ratio of 10%. The pre-compression experiments were performed for all RC beams before strengthening and the maximum crack width was controlled as 0.2 mm. According to the thickness of concrete cover, the beams were divided into 3 groups. Each group was composed of one comparative beam and three tested beams strengthened by steel plates bolted with study according to the thickness of steel plates which were 3 mm, 4 mm and 5 mm, respectively. It was shown that the strain distributions along the height of the strengthened beams at middle-span were in good agreement with the plain section assumption basically. The serviceability performances of corroded RC beams were significantly improved and these ultimate bearing capacities increased obviously. The steel plate bolted with stud effectively reduced the crack width and the extension height of reinforced concrete beams. It was indicated that an increase of steel plates with 35 mm resulted in a decrease of deflection by 13%51% when beams had the same thickness of concrete cover and corrosion ratio. Influence of the thickness of concrete cover on the ultimate bearing capacity was not obvious. 相似文献
17.
成都平原林盘的研究进展与展望 总被引:2,自引:1,他引:1
林盘是成都平原独特的乡村聚落,它是一种复合生态系统,具有重要的生态、经济和文化价值,充分反映人与自然的互动关系。近年来,林盘不断遭受破坏,政府部门和科研学者投入大量关注和研究。笔者归纳和总结了林盘的内涵、演变规律、价值特征及保护与发展等方面的研究进展,针对林盘面临的问题,提出该领域未来的研究重点:(1)林盘生态系统服务的定量化研究及权衡分析;(2)林盘保护、改造及新型农村社区建设的理论与技术;(3)破坏型林盘利用与更新的理论和技术探析。以上研究不仅可以为林盘的保护和改造提供依据,也可以为类似复合生态系统,以及生态化的新农村、新城镇建设进行科学指导。 相似文献
18.
Study on mechanical behaviors of interface with cemented soil slurry between gravel and concrete by simple shear tests
下载免费PDF全文
![点击此处可从《保鲜与加工》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The mechanical behaviors of the interface between coarse-grained soil and concrete are investigated by simple shear tests under conditions of cemented soil slurry (clay mixed with cement grout). The results show that the relation curve between shear stress and shear strain appears stress-strain softening and shear dilatation is significant. The point of peak strength and the position when the shear dilatation occurs are related to normal stress. In addition, shear dilatation occurs before the shear stress reaches peak value. In shear failure state, with the same height, the shear displacement increases as the normal stress increases. While with the same normal stress and at the same height, the shear displacement increases as the concrete content increases. A particle flow model of simple shear test between interface between coarse-grained soil and concrete is constructed by PFC (particle flow code). The disturbed height of the sample and the main influence factors are determined by analyzing the laws of particle motion at different heights inside the sample. The PFC results show disturbed height of the sample is related to maximum particle diameter of the soil, normal stress and roughness of the interface (with or without slurry) etc. In terms of the coarse-grained soil, the shear displacement is significant in the area which is close to the interface and about 3-4 times of the maximum particle diameter, and informed the obvious shear band. Further, the thickness of the interface can be regarded as the value. 相似文献
19.
再生混凝土与锈蚀钢筋间的粘结性能试验研究 总被引:4,自引:0,他引:4
为了探究再生混凝土结构的耐久性能,对5组不同钢筋锈蚀率(0~9%)的再生混凝土梁式试件进行加载试验。分析不同钢筋锈蚀率对再生混凝土梁式试件的钢筋应变、局部粘结应力、粘结滑移和极限粘结应力的影响。结果表明:钢筋锈蚀率大于3%时试件底部开始有细微锈胀裂缝出现;锈蚀率越大,荷载作用下钢筋应变沿锚固位置的变化曲线越平缓;局部粘结应力沿锚固段呈现出双峰分布,峰值主要集中在加载端和自由端附近;加载端附近位置滑移现象最先发生,远离加载端滑移现象延后;随着钢筋锈蚀率的增大,极限粘结强度先增加后降低,极限荷载下的滑移值增大。 相似文献
20.
为研究T形板肋对预制带肋底板混凝土叠合板弯曲疲劳性能的影响,对3块T形肋底板叠合板和1块整浇板进行弯曲疲劳性能对比试验,主要考察T形板肋与疲劳荷载幅值对试件疲劳破坏形态及疲劳损伤程度的影响,得到了在不同疲劳循环加载次数下的跨中动位移、混凝土应变、预应力筋应变、残余变形等,分析了在不同疲劳循环加载次数下的刚度退化情况、荷载-应变分布规律、裂缝分布规律及剩余承载力等。研究结果表明,经历200万次疲劳循环加载后,T形肋底板叠合板无明显的刚度和强度退化,增设T形板肋的叠合板能达到与整浇板相同的弯曲疲劳性能;T形肋底板叠合板正截面弯曲疲劳强度计算可采用普通预应力混凝土受弯构件正截面疲劳应力验算的4个假定,最终以此建立了其正截面弯曲疲劳强度验算方法。 相似文献