Selection for feed efficiency does not change the selection for growth and carcass traits in Nellore cattle

The objectives were to conduct a genetic evaluation of residual feed intake (RFI) and residual feed intake adjusted for fat (RFIFat) and to analyse the effect of selection for these traits on growth, carcass and reproductive traits. Data from 945 Nellore bulls in seven feed efficiency tests in a feedlot were analysed. Genetic evaluation was performed using an animal model in which the feed efficiency test and age of the animal at the beginning of the test were considered as a systematic effect. Direct additive genetic and residual effects were considered as random effects. Correlations and genetic gains were estimated by two‐trait analysis between feed efficiency measures (RFI and RFIFat) and other traits. Feed conversion showed low heritability (0.06), but dry matter intake (DMI), average daily gain, RFI, RFIFat, metabolic body weight and scrotal circumference measured at 450 days of age (SC450) showed moderate to high heritability (0.49, 0.28, 0.33, 0.36, 0.38 and 0.80, respectively). Similarly, ribeye area, backfat thickness, rump cap fat thickness, marbling score and subcutaneous fat thickness also had high heritability values (0.46, 0.37, 0.57, 0.51 and 0.47, respectively). Genetic correlations between RFI and SC450 were null, and between RFIFat and SC450 were strongly positive. Genetic and phenotypic correlations of RFI and RFIFat with carcass traits were not different from zero, as correlated responses for carcass traits were also not different from zero. The Nellore selection for feed efficiency by RFI or RFIFat allows the recognition of feed efficient animals, with DMI reduction and without significant changes in growth and carcass traits. However, because of the observed results between RFIFat and SC450, selection of animals should be analysed with caution and a preselection for reproductive traits is necessary to avoid reproductive impairments in the herd.     

Genome‐wide association study and genomic evaluation of feed efficiency traits in Japanese Black cattle using single‐step genomic best linear unbiased prediction method

The objectives of this study were to better understand the genetic architecture and the possibility of genomic evaluation for feed efficiency traits by (i) performing genome‐wide association studies (GWAS), and (ii) assessing the accuracy of genomic evaluation for feed efficiency traits, using single‐step genomic best linear unbiased prediction (ssGBLUP)‐based methods. The analyses were performed in residual feed intake (RFI), residual body weight gain (RG), and residual intake and body weight gain (RIG) during three different fattening periods. The phenotypes from 4,578 Japanese Black steers, which were progenies of 362 progeny‐tested bulls and the genotypes from the bulls were used in this study. The results of GWAS showed that a total of 16, 8, and 12 gene ontology terms were related to RFI, RG, and RIG, respectively, and the candidate genes identified in RFI and RG were involved in olfactory transduction and the phosphatidylinositol signaling system, respectively. The realized reliabilities of genomic estimated breeding values were low to moderate in the feed efficiency traits. In conclusion, ssGBLUP‐based method can lead to understand some biological functions related to feed efficiency traits, even with small population with genotypes, however, an alternative strategy will be needed to enhance the reliability of genomic evaluation.     

Genetic relationship of feed efficiency traits of bulls with growth and carcass traits of their progeny for Japanese Black (Wagyu) cattle

Genetic parameters for feed efficiency traits of 740 Wagyu bulls and growth and carcass traits of 591 of their progeny, and the genetic relationship between the traits of bulls and their progeny were estimated with the residual maximum likelihood procedure. The estimations were made for the test periods of 140 days (77 bulls), 112 days (663 bulls) and 364 days (591 steer progeny). Feed efficiency traits of bulls included feed conversion ratio (FCR), phenotypic residual feed intake (RFI_phe) and genetic residual feed intake (RFI_gen). Progeny traits were bodyweight at the start of the test (BWS), bodyweight at finish (BWF), average daily gain (ADG), rib eye area (REA), marbling score (MSR), dressing percentage (DRS) and subcutaneous fat thickness (SFT). The estimated heritability for MSR (0.52) was high and for BWS (0.35), BWF (0.40) and ADG (0.30) were moderate, whereas REA, DRS and SFT were low. Positive genetic correlations among BWS, BWF, ADG and SFT and negative genetic correlations between MSR and DRS and between REA and SFT were found. The genetic correlations between residual feed intake (RFI_phe and RFI_gen) of bulls and bodyweights (BWS and BWF) of their progeny ranged from ?0.27 to ?0.61. Residual feed intake was positively correlated with REA and DRS and negatively correlated with MSR and SFT. No responses in ADG and weakly correlated responses in REA and DRS of progeny were found to select against feed efficiency traits of bulls. The present experiment provides evidence that selection against lower RFI (higher feed efficiency) would be better than selection against lower FCR for getting better correlated responses in bodyweights.     

A genomewide association mapping study using ultrasound‐scanned information identifies potential genomic regions and candidate genes affecting carcass traits in Nellore cattle

The aim of this study was to identify candidate genes and genomic regions associated with ultrasound‐derived measurements of the rib‐eye area (REA), backfat thickness (BFT) and rumpfat thickness (RFT) in Nellore cattle. Data from 640 Nellore steers and young bulls with genotypes for 290 863 single nucleotide polymorphisms (SNPs) were used for genomewide association mapping. Significant SNP associations were explored to find possible candidate genes related to physiological processes. Several of the significant markers detected were mapped onto functional candidate genes including ARFGAP3, CLSTN2 and DPYD for REA; OSBPL3 and SUDS3 for BFT; and RARRES1 and VEPH1 for RFT. The physiological pathway related to lipid metabolism (CLSTN2, OSBPL3, RARRES1 and VEPH1) was identified. The significant markers within previously reported QTLs reinforce the importance of the genomic regions, and the other loci offer candidate genes that have not been related to carcass traits in previous investigations.     

Genetic analysis of growth,visual scores,height, and carcass traits in Nelore cattle

Covariance components were estimated for growth traits (BW, birth weight; WW, weaning weight; YW, yearling weight), visual scores (BQ, breed quality; CS, conformation; MS, muscling; NS, navel; PS, finishing precocity), hip height (HH), and carcass traits (BF, backfat thickness; LMA, longissimus muscle area) measured at yearling. Genetic gains were obtained and validation models on direct and maternal effects for BW and WW were fitted. Genetic correlations of growth traits with CS, PS, MS, and HH ranged from 0.20 ± 0.01 to 0.94 ± 0.01 and were positive and low with NS (0.11 ± 0.01 to 0.20 ± 0.01) and favorable with BQ (0.14 ± 0.02 to 0.37 ± 0.02). Null to moderate genetic correlations were obtained between growth and carcass traits. Genetic gains were positive and significant, except for BW. An increase of 0.76 and 0.72 kg is expected for BW and WW, respectively, per unit increase in estimated breeding value (EBV) for direct effect and an additional 0.74 and 1.43, respectively, kg per unit increase in EBV for the maternal effect. Monitoring genetic gains for HH and NS is relevant to maintain an adequate body size and a navel morphological correction, if necessary. Simultaneous selection for growth, morphological, and carcass traits in line with improve maternal performance is a feasible strategy to increase herd productivity.     

Genetic parameters for feed efficiency traits and their relationships with growth and carcass traits in Duroc pigs

Genetic parameters for feed efficiency traits of 380 boars and growth and carcass traits of 1642 pigs (380 boars, 868 gilts and 394 barrows) in seven generations of Duroc population were estimated. Feed efficiency traits included the feed conversion ratio (FCR), and nutritional (RFI(nut)), phenotypic (RFI(phe)) and genetic (RFI(gen)) residual feed intake. Growth and carcass traits were the age to reach 105-kg body weight (A105), loin eye muscle area (EMA), backfat (BF), intra-muscular fat (IMF) and meat tenderness. The mean values for RFI(phe) and RFI(gen) were close to zero and for RFI(nut) was negative. All the measures of feed efficiency were moderately heritable (h(2) = 0.31, 0.38, 0.40 and 0.27 for RFI(nut), RFI(phe), RFI(gen) and FCR respectively). The heritabilities for all growth and carcass traits were moderate (ranged from 0.37 to 0.45), except for BF, which was high (0.72). The genetic correlations of RFI(phe) and RFI(gen) with A105 were positive and high. Measures of RFI were correlated negatively with EMA. BF was more strongly correlated with measures of RFI (r(g) > or = 0.73) than with FCR (r(g) = 0.52). Selection for daily gain, EMA, BF and IMF caused favourable genetic changes in feed efficiency traits. Results of this study indicate that selection against either RFI(phe) or RFI(gen) would give a similar correlated response in carcass traits.     

Effect of adding crude glycerine to diets with feed additives on the feed intake,ruminal degradability,volatile fatty acid concentrations and in vitro gas production of feedlot Nellore cattle

The effects of adding crude glycerine with sodium monensin or essential oils to beef cattle diets on the intake, degradability of DM and nutrients, rumen concentration of volatile fatty acids (VFA) and in vitro gas production were evaluated. Five ruminally cannulated Nellore steers were randomly assigned to a 5 × 5 Latin square design. The treatments were as follows: CONT, without crude glycerine and additives; EO, with essential oils and without crude glycerine; MON, with sodium monensin and without crude glycerine; EOG, with essential oils and crude glycerine; MONG, with sodium monensin and crude glycerine. Treatments with essential oil and sodium monensin increased the NDF and STC intake and the DM degradability. When crude glycerine was combined with either sodium monensin or essential oil, there was a reduction in DM, NDF and STC intake and an increase in DM and CP degradability of the diets. The adding crude glycerine to essential oil diets reduced the CH₄ production. Sodium monensin treatments reduced DM and NDF intake and the production of total gas, CH₄, total VFA and acetic acid concentration. In conclusion, the adding crude glycerine (200 g/kg DM) with either sodium monensin (0.03 g/kg DM) or essential oil (0.5 g/kg DM) can be utilized in diets for Nellore cattle without causing detrimental effects on feed intake and improving the DM degradability.     

Genetic parameters and purebred–crossbred genetic correlations for growth,meat quality,and carcass traits in pigs

Growth, meat quality, and carcass traits are of economic importance in swine breeding. Understanding their genetic basis in purebred (PB) and commercial crossbred (CB) pigs is necessary for a successful breeding program because, although the breeding goal is to improve CB performance, phenotype collection and selection are usually carried out in PB populations housed in biosecure nucleus herds. Thus, the selection is indirect, and the accuracy of selection depends on the genetic correlation between PB and CB performance (rpc). The objectives of this study were to 1) estimate genetic parameters for growth, meat quality, and carcass traits in a PB sire line and related commercial CB pigs and 2) estimate the corresponding genetic correlations between purebred and crossbred performance (rpc). Both objectives were investigated by using pedigree information only (PBLUP) and by combining pedigree and genomic information in a single-step genomic BLUP (ssGBLUP) procedure. Growth rate showed moderate estimates of heritability for both PB and CB based on PBLUP, while estimates were higher in CB based on ssGBLUP. Heritability estimates for meat quality traits were diverse and slightly different based on PB and CB data with both methods. Carcass traits had higher heritability estimates based on PB compared with CB data based on PBLUP and slightly higher estimates for CB data based on ssGBLUP. A wide range of estimates of genetic correlations were obtained among traits within the PB and CB data. In the PB population, estimates of heritabilities and genetic correlations were similar based on PBLUP and ssGBLUP for all traits, while based on the CB data, ssGBLUP resulted in different estimates of genetic parameters with lower SEs. With some exceptions, estimates of rpc were moderate to high. The SE on the rpc estimates was generally large when based on PBLUP due to limited sample size, especially for CBs. In contrast, estimates of rpc based on ssGBLUP were not only more precise but also more consistent among pairs of traits, considering their genetic correlations within the PB and CB data. The wide range of estimates of rpc (less than 0.70 for 7 out of 13 traits) indicates that the use of CB phenotypes recorded on commercial farms, along with genomic information, for selection in the PB population has potential to increase the genetic progress of CB performance.     

Genetic associations between accumulated productivity, and reproductive and growth traits in Nelore cattle

The total meat yield in a beef cattle production cycle is economically very important and depends on the number of calves born per year or birth season, being directly related to reproductive potential. Accumulated Productivity (ACP) is an index that expresses a cow's capacity to give birth regularly at a young age and to wean animals of greater body weight. Using data from cattle participating in the “Program for Genetic Improvement of the Nelore Breed” (PMGRN — Nelore Brasil), bi-trait analyses were performed using the Restricted Maximum Likelihood method based on an ACP animal model and the following traits: age at first calving (AFC), female body weight adjusted for 365 (BW365) and 450 (BW450) days of age, and male scrotal circumference adjusted for 365 (SC365), 450 (SC450), 550 (SC550) and 730 (SC730) days of age. Median estimated ACP heritability was 0.19 and the genetic correlations with AFC, BW365, BW450, SC365, SC450, SC550 and SC730 were 0.33, 0.70, 0.65, 0.08, 0.07, 0.12 and 0.16, respectively. ACP increased and AFC decreased over time, revealing that the selection criteria genetically improved these traits. Selection based on ACP appears to favor the heaviest females at 365 and 450 days of age who showed better reproductive performance as regards AFC. Scrotal circumference was not genetically associated with ACP.     

Genetic correlations between males, females and castrates for residual feed intake, feed conversion ratio, growth rate and carcass composition traits in Large White growing pigs

Data were collected in the course of a divergent selection experiment for residual feed intake (RFI) of Large White growing pigs. This data set was used to estimate (i) heritability for RFI and genetic correlations of RFI with growth and carcass traits within the three sexes (male, castrate and female) and (ii) genetic correlations between sexes for these traits. Individual feed intake of animals raised in collective pens was measured by single-place electronic feeders on 1121 males (candidates for selection), 508 females and 535 castrates (sibs of candidates). Variance components were estimated using the REML methodology applied to a multitrait animal model. Estimates of heritability for RFI were 0.16 ± 0.04, 0.16 ± 0.08 and 0.23 ± 0.10 for males, females and castrates, respectively. Estimates of genetic correlations between sexes for homologous traits were not significantly different from 1 (0.88 to 0.99 for RFI, 0.79 to 0.99 for growth traits and 0.65 to 0.99 for carcass composition traits). The relatively low genetic correlations between castrates and males or females for backfat thickness (0.65 and 0.69, respectively) suggest the presence of genotype by sex interactions for this trait.     

Estimates of genetic variance and variance of predicted genetic merits using pedigree or genomic relationship matrices in six Brown Swiss cattle populations for different traits

The amount of variance captured in genetic estimations may depend on whether a pedigree‐based or genomic relationship matrix is used. The purpose of this study was to investigate the genetic variance as well as the variance of predicted genetic merits (PGM) using pedigree‐based or genomic relationship matrices in Brown Swiss cattle. We examined a range of traits in six populations amounting to 173 population‐trait combinations. A main aim was to determine how using different relationship matrices affect variance estimation. We calculated ratios between different types of estimates and analysed the impact of trait heritability and population size. The genetic variances estimated by REML using a genomic relationship matrix were always smaller than the variances that were similarly estimated using a pedigree‐based relationship matrix. The variances from the genomic relationship matrix became closer to estimates from a pedigree relationship matrix as heritability and population size increased. In contrast, variances of predicted genetic merits obtained using a genomic relationship matrix were mostly larger than variances of genetic merit predicted using pedigree‐based relationship matrix. The ratio of the genomic to pedigree‐based PGM variances decreased as heritability and population size rose. The increased variance among predicted genetic merits is important for animal breeding because this is one of the factors influencing genetic progress.     

Genetic correlations between male reproductive traits and growth traits in growth performance tested Duroc,Landrace and Yorkshire breed boars

Male‐related traits at 180–225 days of age for 6464 grow‐finish performance tested boars were measured from 2000 to 2016. Heritability estimates and genetic correlations among average daily gain, feed efficiency, back fat thickness, teat counts, mounting libido, leg locomotion, penile length, sperm motility, sperm concentration and total sperm counts were estimated by VCE software using a multiple traits animal model in each breed. Growth‐tested boars had heritability estimates of male reproductive traits in 0.34–0.56 of teat counts, 0.12–0.20 of libido, 0.08–0.12 of locomotion, 0.17–0.58 of penile length, 0.04–0.21 of sperm motility and concentration, 0.17–0.30 of total sperm counts. Total sperm counts were genetically positively correlated with penile length in all breeds. Boars with higher total sperm counts had genetically better libido and locomotion. Genetic correlation between feed efficiency and sperm motility and feed efficiency and sperm concentration were positive in Duroc and negative in Landrace and Yorkshire. Sperm motility and concentration were genetically negatively correlated with average daily gain in Yorkshire. Male reproductive traits of imported breeds could be improved with care in the change of growth traits, especially in Yorkshire.     

Effects of parent‐of‐origin models with different pedigree information on beef carcass traits and fatty acid composition in Japanese Black cattle

Genomic imprinting should be considered in animal breeding systems to avoid lead in bias in genetic parameter estimation. The objective of this study was to clarify the effects of pedigree information on imprinting variances for carcass traits and fatty acid composition in Japanese Black cattle. Carcass records [carcass weight, rib eye area, rib thickness (RT), subcutaneous fat thickness and beef marbling score (BMS)] and fatty acid composition were obtained for 11,855 Japanese Black feedlot cattle. To estimate and compare the imprinting variances for the traits, two imprinting models with different pedigree information [the sire–dam gametic relationship matrix (Model 1) and the sire–maternal grandsire (MGS) numerator relationship matrix (Model 2)] were fitted. The ratio of the imprinting variance to the total additive genetic variance for RT (6.33%) and BMS (19.00%) was significant in Model 1, but only that for BMS (21.09%) was significant in Model 2. This study revealed that fitting the sire–MGS model could be useful in estimating imprinting variance under certain conditions, such as when restricted pedigree information is available. Furthermore, the present result suggested that the maternal gametic effects on BMS should be included in breeding programmes for Japanese Black cattle to avoid selection bias caused by imprinting effects.     

Genetic parameters for dry matter, energy and protein intake, and their relationships with performance and carcass traits in Japanese Black cattle

Genetic parameters for feed intake and performance traits of 514 bulls and carcass traits of 22 099 of their progeny, and the relationships of measures of feed intake with performance and carcass traits were estimated. Feed intake traits were dry matter intake (DMI), concentrate intake (CONI), roughage intake, ratio of roughage intake to DMI, metabolizable energy intake (MEI) and digestible crude protein intake (DCPI). Performance traits included daily gain, metabolic weight, live weight at the end of test, dry matter conversion ratio and residual feed intake. Progeny carcass traits were carcass weight, percentage of meat yield, rib eye area (REA), subcutaneous fat, marbling score, meat colour (MCS), fat colour (FCS) and meat quality grade. All the feed intake and performance traits were moderately heritable. The heritabilities for REA and MCS were moderate, and that for FCS was low, while those for the other carcass traits were high. Selection against DMI, CONI and DCPI would reduce excessive intake of feed, but would have undesirable effects on growth and most of the carcass traits. Selection against MEI would lead to improvements in feed efficiency and growth traits. Selection against DCPI would also improve feed efficiency; however, responses in growth traits would decrease. Results indicate that selection against MEI might be better than any other measures of feed intake to improve feed efficiency with simultaneous improvement in growth and most of the carcass traits.     

Estimation of direct and maternal genetic parameters for growth and carcass traits in a herd of Japanese Black cattle in Miyagi prefecture, using a multitrait animal model

Data from 1170 records of fattening calves were collected on growth and carcass traits from a Japanese Black cattle herd located in Miyagi prefecture, Japan. The objective was to determine direct and maternal heritabilities, direct and maternal genetic correlations and phenotypic correlations between bodyweight at the beginning of the fattening period (BWS), bodyweight at the end of the fattening period (BWF), carcass weight (CW), average daily gain during the fattening period (ADG), rib eye area (REA), rib thickness, subcutaneous backfat thickness (SFT), yield estimate (YE) and beef marbling score (BMS). Direct heritability estimates of 0.16 (SFT) and 0.07 (BMS) were low, whereas estimates of the other traits were medium to high and ranged between 0.44 (REA) and 0.78 (CW). Direct genetic correlations were all positive, except those that were between BWS and SFT, and between BWS and YE (?0.49 and ?0.14, respectively). The lowest positive genetic correlation was between BWS and BMS (0.04) and the highest was between BWF and CW (0.99). The phenotypic correlation coefficients ranged between ?0.41 (between SFT and YE) and 0.96 (between BWF and CW). Maternal heritability estimates were generally low and ranged between 0.00 for BMS and 0.08 for BWS, CW and ADG. Selection programs comprising information on growth and carcass traits of calves and maternal traits of dams were suggested.     

Genetic variation in the ovine uncoupling protein 1 gene: association with carcass traits in New Zealand (NZ) Romney sheep,but no association with growth traits in either NZ Romney or NZ Suffolk sheep

The uncoupling protein 1 (UCP1) plays an important role in the regulation of lipolysis and thermogenesis in adipose tissues. Genetic variation within three regions (the promoter, intron 2 and exon 5) of the ovine UCP1 gene (UCP1) was investigated using polymerase chain reaction‐single‐strand conformational polymorphism (PCR‐SSCP) analyses. These revealed three promoter variants (designated A, B and C) and two intron 2 variants (a and b). The association of this genetic variation with variation in lamb carcass traits and postweaning growth was investigated in New Zealand (NZ) Romney and Suffolk sheep. The presence of B in a lamb's genotype was associated with decreased subcutaneous carcass fat depth (V‐GR) (p = 0.004) and proportion of total lean meat yield of loin meat (p = 0.005), and an increased proportion of total lean meat yield of hind‐leg meat (p = 0.018). In contrast, having two copies of C was associated with increased V‐GR (p < 0.001) and proportion of total lean meat yield of shoulder meat (p = 0.009), and a decreased hind‐leg yield (p = 0.032). No associations were found with postweaning growth. These results suggest that ovine UCP1 is a potential gene marker for carcass traits.     

Genetic association between GHSR1a 5′UTR‐microsatellite and nt‐7(C>A) loci and growth and carcass traits in Japanese Black cattle

We carried out a genetic association study between five nucleotide polymorphisms (5′UTR microsatellite ((TG)_n), nt‐7(C>A), L24V, DelR242 and Intron 1 microsatellite) of the GHSR1a gene and growth and carcass traits in 1285 steers sired by 117 Japanese Black bulls in a progeny testing program. We report herein, a significant association between the 5′UTR microsatellite and nt‐7(C>A) loci and growth and carcass traits. We also propose a translational hypothesis that the association is due to differences in the secondary structure of GHSR1b mRNA (the non‐spliced type with the 5′UTR microsatellite) among the GHSR1a gene haplotypes. Furthermore, we predicted the potential increase in profitability due to increased carcass weight in cow‐calf fattening enterprises through planned matings based on DNA testing of the 5′UTR microsatellite. Statistical analysis revealed that the 5′UTR microsatellite locus had a significant additive effect on carcass weight (CW) and average daily gain (ADG), but not on beef marbling score (BMS). One of the four major microsatellite alleles (19‐TG allele) with an allele frequency of 0.145, had a significantly (P < 0.0007) desirable effect on CW and ADG. We concluded that the 19‐TG allele could potentially be economically useful nucleotide markers for growth and carcass traits in Japanese Black cattle.