Influence of Motorcycle Noise on Gear Transmission

The study of motorcycle's acoustic signal shows that gears noise take a great proportion on the whole acoustic of motorcycle.So how to control the noiseof gears is very helpful for reducing the whole motor's acoustic.This paper discusses the engine matching with transmission system in reason,primary transmission and gear geometry design parameter & the mend of tooth body(tooth form & tooth direction) how to influence the acoustic of motorcycle.The study shows that the gear transmission System's matching with engine in reason can notable improve the efficiency of motorcycle.In the meaning time the exactly choosing the primary transmission gear geometry design parameter and the mend of primary transmission gear's tooth body can effectively reduce the acoustic of motorcycle.This paper has engineering practice sense.     

风电齿轮箱传动误差分析及振动噪声预估

针对一级行星两级平行轴风电齿轮传动系统,综合考虑齿轮时变啮合刚度、啮合阻尼、传递误差等因素,建立31个自由度的弯扭轴耦合集中参数动力学模型,采用变步长Runge-Kutta法对系统动力学微分方程进行求解,得出齿轮传动系统各级传动误差;借助软件建立风电齿轮箱刚柔耦合动力学模型,并导入传动误差,采用模态叠加法求得齿轮箱轴承支反力,并将其作为声振耦合模型的边界条件,采用声学有限元法对风电齿轮箱进行振动噪声预估,并与试验结果对比分析,两者吻合良好。     

Numerical Analysis of Flow and Acoustic Field Inside the Automobile Exhaust Muffler

The acoustic field,flow field and temperature field inside a muffler are studied by the numerical analyze method.And an improved design is made aiming at the existent problem.The comparison of the computationally predicted and the experimentally measured transmission loss shows a good agreement.It is indicated that the numerical analysis method can simulate the exhaust muffler's characteristic accurately.So it is an effective method to predict exhaust muffler's performance and have an improved design.     

Power Model of Bond Graph and Dynamic Simulation of Hoist System for Multi-Flow Transmission

The double drive hoist reducer developed in the planetary gear is a new generation of energy saving and environment protecting hoist product. The multi flow transmission system theory of hoist is analyzed. With the theory and method of bond graph,a bond graph model with coupled vibration is established for hoist multi flow transmission system for the first time. The state equation of the system is developed and dynamic simulation analysis is also carried out. The internal changing law and relationship of the system for the state variable are got. Therefore, the dynamic properties and gearing features of this system are revealed comprehensively. The research results can provide the dynamic analysis method and design basis for multi flow transmission system of hoist.     

Dynamic optimization design of marine gear transmission system

A dynamic model of transmission system for a marine gear is established considering time-varying mesh stiffness, mesh damping and tooth composite error. The solution efficiency is improved by taking contact line length change of gear pair instead of instantaneous gear mesh stiffness change and making mesh damping and tooth surface equivalent to viscous damping. Multi-objective dynamic optimization design is put into practice to improve the marine gear transmission system using vibration acceleration and mass as target function. The results show that the optimization method can effectively reduce the vibration level and mass of marine gear.     

Influence of x gear on the Flow Characteristic of the Second Kind of Compound Gear Pump

The paper analysed the influence of x gear on the movement law of each engaging point and the flow characteristic of the second kind of compound gear pump with x gear.The formula of flowrate and flow pulse are given with the best type of instruction.     

Gear-bearing coupling dynamics characteristics of wind turbine planetary gear transmission system under variable load

Considering that the transmission system of wind turbine works in complex and changing load environment caused by stochastic wind speed,this paper uses sparse least squares support vector machine(SL-SVM) to simulate wind speed of true wind field,and obtains time-varying wind load caused by stochastic wind speed. The lumped-parameter method is used to develop a dynamic model of planetary gear transmission system of wind turbine coupled with bearing. The model includes the varying wind load,time-vary mesh stiffness of gear pair and time-vary stiffness of rolling element bearing. The numerical method is used to simulate the dynamic performance of planetary gear system of Multibrid Technology Wind Turbine with 1.5 MW rated power. The vibration displacement responses of the transmission system are obtained as well as dynamic meshing force each pair of gear and nonlinear bearing forces. The research can provide a foundation for optimizing dynamic performance and reliable design of gear transmission system of wind generator.     

Study on Surface Noise Distribution of Three ring Reducer

The three ring reducer is a kind of gear drive developed in the past decade. Adopting the new conception of "parallel and movable axis" of multiple mechanisms, this kind of gear drive has many characteristics such as large transmission ratio, high efficiency and so on. As the three ring reducer has been invented only for ten years, up to date the design of the gear drive is only made with analogue method, no design theory can be followed, there exist serious vibration and noise in transmission, which limit its wide application in industry. In this paper, the transmission principle of SHQ50 reducer is studied, the surface noise distribution of the reducer, transmission ratio 49.5 , is measured and analyzed by means of sound intensity method. The 3D distribution maps of noise on top of reducer, input side and output side of reducer, and left side and right side of reducer are drawn. With the sound intensity frequency maps of each measuring point, the sources of giving out noise are analyzed. The reducer of low vibration and noise can be designed rightly according to the analysis.     

Transmission model of higher-order elliptical bevel gearing and motion simulation for interference checking

Higher-order elliptical bevel gear is a typical form of the noncircular bevel gear transmission.Space spherical coordinate system of the bevel gear meshing is set up based on the meshing theory of space transmission.The varying relationship among the pitch curve,tooth profile and mesh lines are analyzed,and the equation of the gear tooth surface is developed with matrix method based on space coordinate transformation.The basic parameters of the noncircular bevel gear such as transmission ratio,modulus and the number of teeth are designed,and detailed analysis of the influence of the eccentricity on the relevant parameters is carried out as well.By using discrete numerical method and three-dimensional software,the mathematical model of the tooth profile and virtual physical model of the noncircular bevel gear are established,and then simulation on its motion and interference checking are performed.Finally,the approach for design,calculation and generation of the tooth profile is obtained and its correction has been verified by experiment.     

A RELIABILTY CAPACITY OPTIMIZATION ALGORITHM FOR STOCHASTIC FLOW NETWORKS

A model and a heuristic algorithm for reliabilty op timi zation in generalized stochastic flow networks are proposed in this paper. The stochastic characteristic of the demands at terminal nodes is considered in the model. The algorithm proposed is powerful and can be applied to optimal planning of transmission capacity for large scale stochastic flow networks, because it can facilitate a fast location of optimal capacity expansion from the information obtained by the last iteration by making full use of the relationships of the k-weak link set and failure events set to the paramsters in generalized stochastic flow networks     

Parameter Design for Machining Quenched Internal Helical Gears by EDM

Aiming at the problem of machining quenched internal helical gears, a method and its equipment are discussed and designed, which is used for machining quenched internal helical gears by EDM. Its characteristic and principle are proposed. The modifying design of the electrode gear and the calculating method of its modification coefficients is presented. Analyzing for the error of the machining equipment is done. The results show that this problem can be solved by EDM, the electrode gear is the modification gear of machined gear and the machining accuracy can be improved by controlling errors.     

Tooth contact analysis of helical beveloid gear with parallel axis

The study object of this paper is helical beveloid gears with parallel axis. Based on the gear Mshing Principles and the tooth-surface equations of pinion and gear,the mathematical model of tooth contact is developed under standard installation and installations with center distance error,axis error and multiple error respectively. The MATLAB solver is used to obtain the contact trace and the transmission error under different installing conditions and the comparative analysis is made. The results indicate that this gear drive is sensitive to axis installation errors,it forms the edge contact and cause the periodic transmission error. It can provide the foundation for designs and analysis of this gear transmission.     

Dynamic characteristics of multi-stage planetary gear trains in shield machine cutter drive

A purely torsional dynamic model of multi-stage planetary gear trains is developed to investigate the dynamic characteristics of the transmission system in shield machine cutter drive. In the model,phase difference between mesh stiffness and error among each stage caused by different initial mesh positions is considered,and other factors such as component bearing stiffness,time-varying mesh stiffness and error are considered as well. Inherent characteristic analysis shows there are more unique and diverse vibration modes in multi-stage planetary gear trains than in single-stage planetary gear trains. Through dynamic response analysis,time-domain and frequency-domain response of dynamic meshing force of each stage is obtained. As the frequency of exciting force of medium-speed and high-speed stage is in proximity to the natural frequency of the system,harmonic resonance tends to occur,which needs to be paid great attention to. Dynamic factors of each stage are also computed and prepare the ground for the dynamic optimizing design of planetary gear trains.     

The Mode and Vibration Response of the Double Involute Gear

From the mathematical model of the double involute gear teeth surface at any corner position,we establish the model of the double involute gear with high precision and parameter in Pro/E,analyze and calculate the influence of natural frequency by the parameter of the double involute gear,analyze the frequency respond elementary.The conclusions reflect the gear's performance of dynamics,and provide the librate characteristic data for the design of double involute gear.     

Dynamic characteristics research of gear coupling rotor system in gas turbine

Taking the sliding bearing into account, the lateral vibration analysis models of two single rotor were built respectively using the transfer matrix method. The transmission matrix of herringbone gear coupled unit is derived. Using whole transfer matrix method, the lateral torsional coupling analysis model of herringbone gear rotor system is set up, and the vibration characteristics of gear rotor bearing system in gas turbine is analyzed. Through numerical calculation and anlysis, the eigenvalue of gear rotor system, the Logarithmic decrement and the critical speed are obtained. The result shows that the working speed of this gear rotor bearing system is far away from the critical speed, therefore the system is stable and safe.     

Multi-objective dynamic optimization design of high-power wind turbine gearbox

A dynamic model of NGW helical planetary gear transmission for high-power wind turbine gearbox is established by considering these factors as errors of gears and time-varying mesh stiffness by using mass centralized method. Moreover, the random wind velocity is simulated as external seismic excitation making the results more conform to practical condition. And on this basis, this system is optimized for minimum gearbox volume and minimum component torsional acceleration with the restriction of reliability and strength restrain. The result indicates that the optimized parameters make gear transmission lightweight and the dynamic property improved so as to reduing vibration and noised.     

Shift Detection and Shift Control of Automated Mechanical Transmissions

The conventional mechanical transmissions can be retro fitted to carry out the gearshift automatically.Their shifts must be detected by the sensors and controlled by the actuators.The method in detecting the shift with non contacted photoelectricity elements is proposed.For 5 speed gearboxes,two photoelectricity elements are used to detect three gear selecting positions,the other are used to two detect three gear shifting positions.The appropriate arrangement of switch inputs can make the nine shifts of a 5 speed gearbox be detected by four photoelectricity elements.Therefore the necessary switch numbers decrease,the necessary hardware is more simple and the control software is easy.The principle of shift detection and the program flow chart of shift control are given.     

Bending Stress Analysis on Backlash Adjustable Worm Transmission

The full name of variable tooth thickness plane worm gear transmission is. Backlash adjustable plane worm gear with variable tooth thickness enveloping worm transmission, which is a new kind of accurate power transmission that is intervenient between traditional motion transmission and power transmission. Tooth surface equations of the variable tooth thickness plane worm gear transmission are deduced based on the theory of engagement. Basing on the result, the authors create a finite analysis model of backlash adjustable variable tooth thickness plane enveloping worm with perfect tooth shape by using I-DEAS software, and then has done finite element analysis of backlash adjustable variable tooth thickness plane enveloping worm transmission. Finally, the author drew a conclusion about distribution of principal stress and load distribution between teeth, which offer some references for strength and performance analysis of worm transmission.     

Contact analysis of a new style planetary reducer with a double crank and internal gear board

To address the problems of low carrying capacity and short life of bearings in current ring reducers, a new type of ring reducer is proposed which consists of a two stepped transmission. One is a planetary transmission, and the other is an N type planetary transmission with a low tooth number difference. Based on the analysis of structural features, the transmission principle, and a transmission load situation, a contact finite element model of the new type of ring reducer is set up, and the stress value and the actual pairs of meshing teeth are derived by calculation. Based on gear modification research theory, the second stage transmission gear pairs of the new reducer are modified on its teeth profiles. Results demonstrate that the load capacity of transmission gear pairs have been enhanced greatly.     

Numerical simulation of the internal dynamic excitation of a spiral bevel gear transmission

A 3-D geometry model and a static/dynamic finite element (FE) model of a spiral bevel gear transmission are established. Using ANSYS software, the mesh stiffness excitation of a tooth pair is calculated via the static contact FE method. Using LS