Analysis of volatile compounds released during the grinding of roasted coffee beans using solid-phase microextraction

A dynamic solid-phase microextraction (SPME) method to sample fresh headspace volatile compounds released during the grinding of roasted coffee beans was described and the analytical results using gas chromatography/mass spectrometry (GC/MS) and GC/olfactometry (GC/O) were compared to those of the conventional static SPME sampling methods using ground coffee. Volatile compounds released during the grinding of roasted coffee beans (150 g) were obtained by exposing the SPME fiber (poly(dimethylsiloxane)/divinylbenzene, PDMS/ DVB) for 8 min to nitrogen gas (600 mL/min) discharged from a glass vessel in which the electronic coffee grinder was enclosed. Identification and characterization of volatile compounds thus obtained were achieved by GC/MS and GC/O. Peak areas of 47 typical coffee volatile compounds, separated on total ion chromatogram (TIC), obtained by the dynamic SPME method, showed coefficients of variation less than 5% (n = 3) and the gas chromatographic profile of volatile compounds thus obtained was similar to that of the solvent extract of ground coffee, except for highly volatile compounds such as 4-hydroxy-2,5-dimethyl-3(2H)-furanone and 4-ethenyl-2-methoxyphenol. Also, SPME dilution analysis of volatile compounds released during the grinding of roasted coffee beans showed linear plots of peak area versus exposed fiber length (R (2) > 0.89). Compared with those of the headspace volatile compounds of ground coffee using GC/MS and GC/O, the volatile compounds generated during the grinding of roasted coffee beans were rich in nutty- and smoke-roast aromas.     

Determination of ethyl carbamate in distilled alcoholic beverages by gas chromatography with flame ionization or mass spectrometric detection

Quantitative methods are detailed for determination of ethyl carbamate in distilled alcoholic beverages by capillary gas chromatography with flame ionization detection (GC/FID) and by packed-column gas chromatography/mass spectrometry (GC/MS) using selected ion monitoring. Five g samples of distillate of known ethanol concentration are diluted with water to 25% ethanol (v/v), washed with petroleum ether, and extracted with dichloromethane prior to GC/FID or GC/MS analysis. As necessary, sample extracts that exhibit GC/FID interference are passed through alumina for additional cleanup. When internal standards (tert-butyl carbamate and n-butyl carbamate for GC/FID, or ethyl 13C-15N-carbamate for GC/MS) were used for quantitation, the limit of detection for ethyl carbamate was in the range of 5-25 ppb. Coefficients of variation ranged from 3.5 to 6.0% for GC/FID determinations, and from 1.4 to 3.2% for GC/MS. Correlation between methods for 22 random distillate samples ranging in concentration from approximately 40 to 800 ppb gave a correlation coefficient (r) of 0.996.     

Liquid chromatographic multicomponent method for determination of residues of ipronidazole, ronidazole, and dimetridazole and some relevant metabolites in eggs, plasma, and feces and its use in depletion studies in laying hens

A simple, rapid liquid chromatographic (LC) method that uses UV/VIS detection has been developed for the determination in eggs of residues of the histomonostats dimetridazole (DMZ), ronidazole (RON), ipronidazole (IPR), and side-chain hydroxylated metabolites of DMZ and RON. Sample pretreatment includes an aqueous extraction, purification with an Extrelut cartridge, and acid partitioning with isooctane. An aliquot of the final aqueous extract is injected into a reverse-phase LC system; detection is performed at 313 nm. The limits of determination are in the 5-10 microgram/kg range. A UV/VIS spectrum can be obtained at the 10 microgram/kg level by using diode-array UV/VIS detection. Recoveries are between 80 and 98% with a coefficient of variation of about 5%. Some 20 samples can be analyzed per day. A side-chain hydroxylated metabolite of IPR can also be detected with this method, as demonstrated with samples from animal experiments. After a single oral dose of the drugs to laying hens, residues of the parent compound and/or the hydroxylated metabolites could be detected in eggs 5-8 days after dosing. Plasma distribution and excretion in feces were established both with and without deconjugation. DMZ and IPR were extensively metabolized to hydroxylated nitroimidazole metabolites; RON was excreted mainly as the parent compound.     

Determination of phytosterols in butter samples by using capillary column gas chromatography

A positive bias in the gas chromatographic (GC) analysis of butter for beta-sitosterol was discovered when attempting to confirm values by gas chromatography/mass spectrometry (GC/MS). The source of the problem was traced to an interfering material that was not effectively separated by packed column GC. Because capillary columns are known to provide superior separation, they were substituted for packed columns in the assay, and instrument parameters were modified accordingly. A compound with a similar retention time, identified by GC/MS as lanosterol, was separated from beta-sitosterol by the capillary column. The capillary column technique was applied to over 300 butter samples. The results indicate that the method can accurately quantitate beta-sitosterol in butter with no known interferences. The limit of detection for this method is 1 mg/100 g. Recoveries at a level of 3 mg/100 g averaged 98% with a coefficient of variation of 3.45%.     

Automated gas chromatographic method for the determination of ethanol in canned salmon

A method has been developed for the determination of ethanol in canned salmon using automated headspace sampling in conjunction with analysis by gas chromatography. The thermal process for the commercial sterilization of canned salmon is shown to provide an effective extraction of the ethanol so that the fluid removed from the can may be used as the analytical sample with minimal preparation prior to analysis. Ethanol content is measured directly, without the need for an internal standard, by either GC/MS or GC/FID. The headspace autoanalyzer allows for a rapid determination of ethanol with greater reproducibility than could be obtained with manual injection systems. The GC/MS technique can also provide an advantage in that simultaneous single ion monitoring of the two major ethanol ions provides additional protection from interferences. To assess the applicability of this technique to other substrates, Atlantic sea scallop meats were also successfully analyzed by this technique.     

Ion-trap tandem mass spectrometry for the analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans, and dioxin-like polychlorinated biphenyls in food

This paper reports on the applicability of gas chromatography coupled to ion-trap tandem mass spectrometry (GC/ITMS/MS) for the analysis of polychlorinated dibenzo- p-dioxins (PCDDs), dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dl-PCBs) in food. MS/MS parameters were selected to achieve the high sensitivity and selectivity required for food analysis. Good precision (RSD=5-18% for PCDD/Fs and 6-14% for dl-PCBs) and low limits of detection for PCDD/Fs (0.1-0.93 pg/g of fat) and dl-PCBs (0.1-0.89 pg/g of fat) were obtained. A comparative study of the congener-specific determination using both GC/ITMS/MS and GC-high resolution mass spectrometry (GC/HRMS) was performed by analyzing several matrices such as milk, fish oil, chicken, pork, fish, eggs, and a chicken compound feed, at low pg/g levels. The results using GC/ITMS/MS were in good agreement with those obtained by GC/HRMS. Consequently, GC/ITMS/MS is proposed for the analysis of PCDD/Fs and dl-PCBs in food and feed samples.     

Correlations between pulp properties of eucalyptus clones and leaf volatiles using automated solid-phase microextraction

Analysis of biogenic volatile organic compounds (BVOC) of 14 Eucalyptus clones has been performed using an automated headspace solid-phase microextraction (HS-SPME) coupled to gas chromatography (GC)/ion trap mass spectrometry (ITMS) method. Correlations between pulp properties of Eucalyptus clones and the BVOC of their leaf headspaces were studied. The compounds alpha-terpineol and the sesquiterpene beta-eudesmol were positively correlated with S5, a property related to the hemicelluose content in the pulp. Qualitative results obtained with automated HS-SPME were sufficient to group together the same species and related hybrids through cluster analysis and were confirmed through principal component analysis. A preliminary separation of the essential oils of Eucalyptus dunnii through comprehensive two-dimensional gas chromatography (GC x GC) showed approximately 580 peaks compared to approximately 60 in a typical GC/ITMS first-dimension chromatogram. The potential of HS-SPME coupled to GC x GC to improve the separation of Eucalyptus volatiles and other plant essential oils looks extremely promising for new applications of unsupervised learning methods.     

Determination of fluoroacetate in biological matrixes as the dodecyl ester

A new method for the quantitative determination of fluoroacetate in biological samples was applied to a number of avian samples. Fluoroacetate is isolated as its potassium salt by ion-exchange chromatography and directly converted to its dodecyl ester, using a novel derivatization procedure. The ester is quantified by capillary gas chromatography with a flame ionization detector for the range 1.0-10.0 micrograms/g and by selected ion monitoring GC/mass spectrometry for the range 0.01-1.00 microgram/g. Recoveries from 1 g chicken muscle were about 80%. The method was applied to the determination of fluoroacetate in the crop, stomach, liver, heart, intestine, and breast muscle of 5 Zebra finches (Peophila guttata) that had been fed millet containing 9 micrograms/g of sodium fluoroacetate. Despite a wide variation in dose, the levels in organs and tissues were approximately 1 microgram/g except for heart tissue which was about 2 micrograms/g. The presence of interfering peaks at low levels necessitated the use of selected ion monitoring GC/MS when sample weights were less than 1 g or when levels were less than 1 microgram/g. Samples can be analyzed within hours of receipt; therefore, the method is suitable for routine use in a diagnostic laboratory.     

Multiresidue analysis of pesticides in soil by gas chromatography with nitrogen-phosphorus detection and gas chromatography mass spectrometry

A rapid multiresidue method for the simultaneous determination of 25 fungicides and insecticides in soil was developed. Soil samples are extracted by sonication with a water-acetonitrile mixture, and the pesticides are partitioned into dichloromethane. Final determination was made by gas chromatography (GC) with nitrogen-phosphorus detection (NPD). Confirmation analysis of pesticides was carried out by GC-MS in the selected ion monitoring (SIM) mode. The identification of compounds was based on retention time and on comparison of the primary and secondary ions. The average recovery by the GC-NPD method obtained for these compounds varied from 68.5% to 112.1% with a relative standard deviation between 1.8% and 6.2%. The GC-NPD method presents good linearity over the range assayed 50-2000 microg/L, and the detection limit for the pesticides studied varied from 0.1 to 10.4 microg/kg. The proposed method was used to determine pesticide levels in soil samples from experimental greenhouse pepper cultivation.     

Concentration of Polycyclic Aromatic Hydrocarbons and Base Cations in the Air and Drinking Water of the Silesian Rehabilitation Centre,Poland

Investigations were carried out to assess air and potable waterpollution with selected highly bioactive organic compounds,including polycyclic aromatic hydrocarbons (PAHs), in theenvironment of the Silesian Rehabilitation Centre, Repty ?l?skie, Poland. The results were compared with those forother towns of the region.Solid phase extraction (SPE) and capillary gas chromatography(CGC) with flame ionization detector (FID) and mass spectrometer(MS) were used for a qualitative-quantitative analysis. Moreover, water concentration of calcium, magnesium ions andnitrite ions were measured by spectrophotometric methods. Thequality of the Centre environment air and water found to besatisfactory and better than that in the other sampling sites which were studied for all the parameters.

     

Improved automated extraction and separation procedure for soil lipid analyses

Analysis of soil lipids may contribute to an improved understanding of atmosphere to soil carbon fluxes, soil organic matter source differentiation and pollutant accumulation. Soil lipids, mostly originating from plants and microorganisms, have traditionally been analysed by non‐automated extraction and separation methods, which produce several lipid fractions, operationally defined by polarity. Here we present a combination of fast, automated and reproducible techniques, adopted from organic geochemical studies, for preparative separation of individual soil lipid fractions with increasing polarity. These techniques involve commercially available instruments, including accelerated solvent extraction and a two‐step automated medium‐pressure liquid chromatography procedure. The method yields eight lipid fractions consisting of five fractions fully amenable to gas chromatography/mass spectrometry (GC/MS) (aliphatic hydrocarbons, aromatic hydrocarbons, ketones, alcohols, carboxylic acids), and three fractions of highly polar or high molecular weight compounds (bases, very long‐chain wax esters (C40₊), high polarity compounds) that were not measurable with GC/MS under standard conditions. We tested the method on five agricultural soils. Results show that (i) mass recoveries for the individual fractions are reproducible, (ii) within individual fractions compound distribution patterns are reproducible, as demonstrated for alkanes and carboxylic acids, and (iii) individual fractions represent distinct and clean compound classes, free of interfering substances detectable by GC/MS. Thus, automated separation can be a fast, effective and reproducible procedure for fractionation of complex mixtures of soil lipids into clean compound classes, directly suitable for a variety of molecular (e.g. GC/MS) and isotopic characterizations (e.g. gas chromatography coupled with isotope ratio monitoring mass spectrometry or accelerator mass spectrometry).     

Rapid liquid chromatographic determination of dimetridazole and ipronidazole in swine feed

A simple and rapid method is described for the determination of dimetridazole (DMZ) and ipronidazole (IPR) in swine feeds at various levels (0.11-110 ppm). The drugs are released from feed by prewetting with a buffer, followed by extraction with either methanol or methylene chloride, depending on the drug level; if necessary, an acid-base cleanup is used before the liquid chromatographic analysis. The analytes are separated on a C18 column and monitored at 320 nm for detection and quantitation. Recoveries of DMZ from several feed formulations averaged 108% at the 92.8 ppm level with a standard deviation (SD) of 4.00% and a coefficient of variation (CV) of 3.70%, 101% at the 11.2 ppm level with an SD of 11.9% and a CV of 11.8%, and 100% at the 0.112 ppm level with an SD of 9.27% and a CV of 9.25%. Recoveries of IPR averaged 77.1% at the 12.9 ppm level with an SD of 1.75% and a CV of 2.27%; IPR recoveries averaged 35.2% at the 0.129 ppm level with an SD of 3.39% and a CV of 9.63%.     

Improved GC‐MS/MS Method for Determination of Atrazine and Its Chlorinated Metabolites in Forage Plants—Laboratory and Field Experiments

Abstract

Analytical procedures using gas chromatography–ion trap tandem mass spectrometry (GC‐MS/MS) were developed to analyze atrazine (ATR) and its dealkylated metabolites in four forage species (switchgrass, tall fescue, smooth bromegrass, and orchardgrass). Atrazine, deethylatrazine (DEA), and deisopropylatrazine (DIA) were extracted with methanol (CH₃OH) followed by liquid–liquid extraction and partitioning into chloroform, with additional cleanup by C₁₈ solid‐phase extraction (SPE). Through the optimization of ionization conditions and ion storage voltages, the background noise of product ion spectra (MS/MS) was reduced dramatically, providing sub‐µg/kg detection limits. Mean recoveries of ATR, DEA, and DIA were 94.3, 105.6, and 113.1%, respectively. The estimated limit of detection (LOD) was 0.6 µg/kg for ATR, 1.3 µg/kg for DEA, and 0.3 µg/kg for DIA. These LODs were one to two orders of magnitude lower than those reported for other GC‐MS, GC‐MS/MS, high pressure liquid chromatography (HPLC)‐UV, or HPLC‐MS/MS procedures designed for food‐safety monitoring purposes. To validate the developed method, a field experiment was carried out utilizing three replications of four forage treatments (orchardgrass, tall fescue, smooth bromegrass, and switchgrass). Forage plants were sampled for analyses 25 days after atrazine application. DEA concentrations in C3 grasses ranged from 47 to 96 µg/kg, about 10‐fold higher than in switchgrass, a C4 species. The ATR and DIA concentrations were similar, ranging from 1.5 to 13.2 µg/kg. The developed method provided sufficient sensitivity to determine the fate of ATR and its chlorinated metabolites via plant uptake from soil or dealkylation within living forage grasses. It also represented significant improvements in sensitivity compared to previous GC methods.     

Composition of the essential oil of Mentha microphylla from the Gennargentu Mountains (Sardinia,Italy)

The essential oil obtained by hydrodistillation of the fresh aerial parts of Mentha microphylla C. Kock (Lamiaceae) collected on the Gennargentu Mountains (Sardinia, Italy) has been investigated by gas chromatography (GC) and GC/mass spectrometry (MS). The main constituents that resulted were pulegone (34.1%), piperitenone oxide (32.9%), and piperitenone (11.3%). The presence of small amounts of compounds such as ethyl hexanoate, 1-octen-3-ol, nonanal, and ethyl 2-methylbutanoate could justify the particular odorous profile of the plant, resembling the aroma of milk and other dairy products such as mozzarella.     

Chemical composition and antifungal activity of Arnica longifolia, Aster hesperius, and Chrysothamnus nauseosus essential oils

Essential oils from three different Asteraceae obtained by hydrodistillation of aerial parts were analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC/MS). Main compounds obtained from each taxon were found as follows: Arnica longifolia carvacrol 37.3%, alpha-bisabolol 8.2%; Aster hesperius hexadecanoic acid 29.6%, carvacrol 15.2%; and Chrysothamnus nauseosus var. nauseosus beta-phellandrene 22.8% and beta-pinene 19.8%. Essential oils were also evaluated for their antimalarial and antimicrobial activity against human pathogens, and antifungal activities against plant pathogens. No antimalarial and antimicrobial activities against human pathogens were observed. Direct bioautography demonstrated antifungal activity of the essential oils obtained from three Asteraceae taxa and two pure compounds, carvacrol and beta-bisabolol, to the plant pathogens Colletotrichum acutatum, C. fragariae and C. gloeosporioides. Subsequent evaluation of antifungal compounds using a 96-well micro-dilution broth assay indicated that alpha-bisabolol showed weak growth inhibition of the plant pathogen Botrytis cinerea after 72 h.     

Ion abundance criteria for gas chromatographic/mass spectrometric environmental analysis

Mass and intensity calibration of gas chromatograph/mass spectrometer (GC/MS) responses is an important quality assurance issue for chemical analysis. Ion abundance calibration with decafluorotriphenylphosphine (DFTPP) was applied in 1975 to standardize quadrupole spectra to resemble the ion abundances that were obtainable from magnetic sector mass spectrometers. Modern quadrupole mass spectrometers provide significantly greater high-mass sensitivity than allowed under the 1975 study. Thus, those recommendations were reevaluated with 2 approaches. First, an interlaboratory study was conducted using 15 different gas chromatography/mass spectrometry (GC/MS) systems. Second, the U.S. Environmental Protection Agency Contract Laboratory Program (EPA-CLP) quality assurance data base was searched and over 6500 DFTPP tune results were plotted and evaluated. Based on these approaches, updated ion abundance criteria recommendations have been developed, which contemporary instruments can meet, and which meet data quality objectives regarding identification and quantitative analysis of analytes.     

Gas chromatographic/mass spectrometric determination of daminozide in high protein food products

A gas chromatographic/mass spectrometric (GC/MS) method for determining daminozide in high protein products has been developed. Daminozide is hydrolyzed in the presence of a strong base to form unsymmetrical dimethylhydrazine (UDMH) which is then distilled from the food matrix. A stable derivative is formed by reacting UDMH with salicyladehyde to form salicyaldehyde dimethylhydrazone. This derivative is separated and quantitated by GC/MS using selected ion monitoring (SIM) of key ions in the fragmentation pattern: m/z 164 (molecular ion of hydrazone) and m/z 120 (C7H6ON). An internal standard, 4-nitroanisole, is monitored at m/z 153 (molecular ion) and m/z 123 (C6H5O2N). The limit of detection is 0.01 ppm daminozide in a 50 g sample; however, because of variation at low levels, the limit of quantitation is 0.1 ppm. Recoveries are 90% or greater from peanuts and peanut butter spiked at the 0.1-2 ppm level. Reproducibility of the method depends on the food matrix and is 26% RSD in the worst case. Data are compared for the GC/MS method and the official EPA colorimetric procedure. Results showed a high bias in the colorimetric method, especially when roasted peanut products were analyzed.     

Analysis of volatiles from Spanish honeys by solid-phase microextraction and gas chromatography-mass spectrometry

Headspace solid-phase microextraction (SPME), followed by gas chromatography (GC)-mass spectrometry (MS) determination, has been used for the analysis of honey volatiles. Two SPME fibers were employed to study the composition of volatiles from various types of Spanish honeys. The best results were obtained with the Carboxen/PDMS fiber, using a homogenization time of 1 h at 70 degrees C and a sampling period of 30 min. A total of 35 compounds were detected, most of them identified by GC-MS and quantified using external standards. Differences in the composition of honey volatiles were obtained, and these results allowed the differentiation of honeys. However, further studies are necessary to confirm the utility of this technique as an alternative tool for the characterization of the floral origin of honeys.     

Modified gas chromatographic/mass spectrometric method for determination of daminozide in high protein food products

A modified version of the Conditt and Baumgardner gas chromatographic/mass spectroscopic (GC/MS) method for determination of daminozide in peanut butter and raw peanuts is described. Daminozide in the food product is hydrolyzed to unsymmetrical dimethylhydrazine (UDMH) by sodium hydroxide digestion. The generated UDMH is distilled from the food matrix and captured by reaction with salicylaldehyde in a condensation trap. Resulting high pH distillates generated by peanuts and peanut products are adjusted back to a pH of 5-6 through addition of glacial acetic acid. After thermal incubation and extraction into methylene chloride, salicylaldehyde dimethylhydrazone is separated from interferences by capillary GC and quantitated by MS using the selective ion monitoring (SIM) mode. Quantitation of daminozide is based on the ratio of the salicylaldehyde dimethylhydrazone molecular ion (m/z 164) to the molecular ion (m/z 153) of the internal standard, 4-nitroanisole. Confirmation of daminozide identity is determined by relative intensity of the m/z 164 ion to the m/z 120 (C7H4ON) ion. Improved m/z 164 ion intensity and reduction of neighboring interferences due to acetic acid treatment permitted a daminozide detection limit of 0.005 ppm in a 50 g sample and an associated 0.02 ppm limit of quantitation. This modification is specific for high protein samples that generate high pH distillates such as peanuts and peanut products and is not specifically intended for analysis of low protein samples.