Assessing the relationship among fabric constructional parameters, fractional reflectances and cover factors of polyester fabrics by experimental and mathematical methods

This paper focuses on the assessment of the relation among constructional properties, fractional reflectances and cover factors of fabrics woven from polyester yarns. A novel equation for the calculation of the relation between fractional reflectance and fabric cover factor was proposed and the usage of the equation was assessed by reflectance measurements. 48 polyester fabrics having different constructional parameters were used and the fabrics differed from each other by their cover factors. The warp yarn type and count, warp density and warp yarn twist were the same but weft yarn count, weft yarn fiber count and weft density were different for the fabrics in the experimental sub-groups. The reflectance measurements were conducted on the pretreated but undyed fabric samples as well as on the individual yarn systems of the same fabrics. Fabrics with the same cover factors exhibited different fractional reflectances. Reflectances were found to be dependent on the cover factor as well as on yarn fiber fineness, yarn count, yarn density and fabric weave. The changes in crimp of the yarns according to different construction parameters also governed the changes in fractional reflectances of fabric surfaces. The proposed equation was tested according to different fabric construction parameters and it was concluded that fiber fineness and weave pattern were among the most important parameters which govern the total light reflectances from the fabric surfaces, although they are not incorporated in the calculation of the fabric cover factors. The proposed equation was used to explain the effects of these components on the reflectance behavior of the fabric surfaces and on fabric cover.     

Reflectance prediction of colored polyester fabrics by a novel formula

This paper focuses on the reflectance prediction of colored (unicolored) fabrics considering relationship between fractional reflectance values and cover factors of fabrics woven from polyester yarns. A novel equation for the calculation of relation between fractional reflectance and cover factor was proposed and usage of the equation was assessed by reflectance measurements. 48 dyed polyester fabrics having different constructional parameters were used and fabrics differed from each other by their cover factors. Warp yarn type and count, warp density and warp yarn twist were the same but weft yarn count, weft yarn fiber count and weft density were different for the fabrics in experimental sub-groups. The reflectance measurements were conducted on the dyed fabric samples as well as on the individual yarn systems (warp and weft) of the same fabrics. The proposed equation was tested according to different fabric constructional parameters and reasonable results with the experimental data were obtained. The possibilities of general use of derived mathematical relations between theoretical and measured reflectance values were researched. The relation obtained was used to explain the effects of different constructional parameters on reflectance behavior of fabric surfaces.     

Assessment of the surface roughness of cotton fabrics through different yarn and fabric structural properties

The effects of some yarn properties (i.e. type, count, twist level, ply number, unevenness and crimp) and fabric constructional properties (i.e. cover, thickness and balance) on surface roughness values of cotton woven fabrics were investigated. A general overview of the results showed that surface roughness values of fabrics were affected from yarn and fabric properties and the effects were related to fabric balance, fabric cover (not cover factor), fabric thickness and crimp values of yarns in fabric structures. Surface roughness values of fabrics decreased as yarn fineness and yarn twist levels increased but as yarn ply number decreased. Also, surface roughness values gradually decreased from open-end yarn constituting fabrics to combed yarn constituting fabrics. Results showed that different properties of yarns caused changes in yarn crimps in fabric structure and also governed the changes in fabric balance, as well as changes in roughness of fabric surfaces. The changing properties of yarns and impact of these properties on fabric construction affected the formation of cotton fabric surfaces from smooth to coarse.     

Assessment of color strength and color difference values of polyester fabrics containing continuous weft yarns after abrasion

This paper assesses the color difference and color strength values (K/S) obtained for eight disperse-dyed polyester fabric samples with different fabric construction parameters (weft yarn type, weft yarn count, weft density and fabric weave) after four sets of abrasion cycles. Warp yarn type and count, warp density, and warp yarn twist are the same for all fabrics. Fabric samples are dyed in a commercial red disperse dye (C.I. Disperse Red 74:1) and four different abrasion cycles (2500, 5000, 7500, 10000) are used. TheK/S values of the abraided fabrics and color difference values between the control fabric (dyed but not abraided) and abraded fabrics are calculated. The main differences in theK/S and color difference values are observed between 0–2500 abrasion cycles. The high tenacity of the polyester fibers and continuous polyester yarns causes some fuzz but no pilling formation on the fabric surface that lead to increasedK/S values and color differences. Fiber dullness, yarn thickness, yarn density and fabric weave are concluded to have different effects on the appearance after abrasion.     

Predicting bending rigidity of woven fabrics using artificial neural networks

This paper reports an investigation on the predictability of bending property of woven fabrics from their constructional parameters using artificial neural network (ANN) approach. Number of cotton grey fabrics made of plain and satin weave designs were desized, scoured, and relaxed. The fabrics were then conditioned and tested for bending properties. Thread density in fabric, yarn linear density, twist in yarn, and weave design were accounted as input parameters for the model whereas bending rigidity in warp and weft directions of fabric formed the outputs. Gradient descent with momentum and an adaptive learning rate back-propagation was employed as learning algorithm to train the network. A sensitivity analysis was carried out to study the robustness of the model.     

Evaluation of the structural properties of plain fabrics woven from various fibers using Peirce’s model

Peirce’s fabric model has been widely used to predict the structural behavior of various plain woven fabrics. The structure of plain woven fabric can be defined in terms of the warp yarn number, weft yarn number, warp fabric density, weft fabric density, warp crimp, and weft crimp. The warp and weft yarn diameters are calculated from the warp and weft yarn numbers, and the effective coefficient of the yarn diameter is defined by using this model. We have investigated structural properties, such as the effective coefficient of the yarn diameter, yarn crimp, and fabric thickness for two different fabrics in which the constituent yarns are assumed to be either incompressible or compressible. This model is also applied to various plain fabrics woven from cotton, rayon, wool, linen, nylon, acetate, polyester, and silk yarns.     

Electromagnetic interference shielding effectiveness of SS/PET hybrid yarn incorporated woven fabrics

A detailed study of electromagnetic shielding effectiveness (EMSE) of woven fabrics made of polyester and stainless steel/polyester blended conductive yarn was presented in this research work. Fabrics with different structures were analyzed and their shielding behavior was reported under different frequencies. Shielding efficiency of fabric was analyzed by vector network analyzer in the frequency range of 300 kHz to 1.5 GHz using coaxial transmission line holder. The effects of different fabric parameters such as weft density, proportion of conductive weft yarn, proportion of stainless steel content, grid openness, weave pattern and number of fabric layers on EMSE of fabrics were studied. The EMSE of fabric was found to be increased with increase in proportion of conductive yarn in the weft way. With increase in overall stainless-steel content in the fabric, the EMSE of fabric was increased. As such weave is considered, it did not have significant effect on EMSE of fabrics. But fabric with lower openness and aperture ratio showed better conducting network, hence better shielding. With increase in number of layers of fabric and ply yarns, EMSE of fabric was increased.     

Effect of weaving process on tensile characterization of single and multiple ends of air-entangled textured polyester yarns

The tensile properties of air-entangled textured polyester single and multiple yarn ends before and after weaving were analyzed. The effects of weaving process considering fabric unit cell interlacement and number of yarn ends were evaluated by regression model. For this purpose, plain, ribs and satin woven fabrics were produced. The yarns were raveled from fabrics, and the tensile tests were applied to these yarns. The developed regression model showed that the number of interlacement and crimp ratio on the warp and weft yarns influence their tensile strength. Tensile strength of raveled yarns decreased compared to that of the bobbin yarn due to the effect of weaving process. This property degradation on the ravel yarns considered process degradation. Generally, when the number of warp and weft yarn ends increases, the warp and weft yarn tensile strengths for each fabric type decrease, whereas the warp and weft yarn tensile elongations slightly increase. The results from regression model were compared with the measured values. This study confirmed that the method in the study can be a viable and reliable tool. The research finding could be useful those who work on preform fabrication.     

Simulation of the weave structural design of synthetic woven fabrics

This study surveys the basic procedure of data base system of the fabric structural design which can be linked with existing pattern design and garment design CAD systems. For this purpose, the theoretical and empirical equations related to the fabric structural design are analyzed and discussed with various fabric specimens. The fabric structural parameters such as weave density coefficient, cover factor and yarn density coefficient of various kinds of fabrics are calculated using the empirical equations. These calculated fabric structural parameters of many kinds of polyester and nylon fabrics are compared and discussed with weave pattern, and materials such as polyester and nylon. Furthermore the difference between fabric structural parameters calculated by empirical equations are analyzed with polyester and nylon fabrics as a basic study for data base system of the fabric structural design. Finally, the weave density coefficients of polyester and nylon fabrics were analysed and discussed with shrinkages of dyeing and finishing processes, and also surveyed according to the weaving company and weave structural parameters such as weave pattern and denier.     

Using artificial neural network to predict colour properties of laser-treated 100% cotton fabric

In this paper, artificial neural network (ANN) model was used for predicting colour properties of 100 % cotton fabrics, including colour yield (in terms of K/S value) and CIE L, a, and b values, under the influence of laser engraving process with various combination of laser processing parameters. Variables examined in the ANN model included fibre composition, fabric density (warp and weft direction), mass of fabric, fabric thickness and linear density of yarn (warp and weft direction). The ANN model was compared with a linear regression model where the ANN model produced superior results in prediction of colour properties of laser engraved 100 % cotton fabrics. The relative importance of the examined factors influencing colour properties was also investigated. The analysis revealed that laser processing parameters played an important role in affecting the colour properties of the treated 100 % cotton fabrics.     

The effect of weft density on the skewness of the twill weave woven fabric

This experimental study investigates the effect of weft density on the skewness of the twill weave woven fabrics. A total of 12 rolls of woven fabrics - 2/2, 3/3 and 4/4 - twill weave, with 20, 22, 24 and 26 weft densities were produced and their skewness due to relaxation was measured. The measured values show that as the weft density increases from 20 to 26, the skewness decreases from 2.4, 2.9, 3.6 to 1, 1.1 and 1.15 respectively. This decrease supports the idea that the increase in weft density drops the effect of the weave type on skewness. In fact, this experimental work reveals that increase in weft density lowers the free spaces between the floats, shortens the float length and raises the shearing rigidity of the fabric and as a result the ability of the warp floats’ in-plane lever to move and skew is lowered.     

New production method for a plain weave figured fabric

A new production method for figured fabric has been developed. The figured fabric generated in this study is a plain weave piled fabric and it shows the same figure on both sides unlike those fabrics woven on dobby or jacquard looms. It is woven by a specialty yarn called the chenille yarn which is obtained by separating each warp of a base fabric woven in leno structure. The base fabric is woven by inserting different colored weft each time in a certain sequence arranged according to the target figure image. A CAD software and a computerized controller have been developed to control all the motions of a conventional rapier loom and to handle the numerous weft insertion schedule efficiently.     

Handle,fit and pressure comfort of silk/hybrid yarn woven stretch fabrics

Hybrid yarn was produced by twisting silk with nylon covered lycra yarn. Silk of 20 D in warp and hybrid yarn in weft was woven to develop lustrous woven stretch fabrics for sari blouse. Silk and hybrid yarn fabrics were produced in three different weaves namely plain, crepe and sateen. An in-depth study was carried out to understand the effect of weave on thermal comfort; low stress mechanical properties, total hand value and stretch properties. Nine blouses (3 samples× 3 figures) were constructed from three different woven stretch materials for fit assessment and objective pressure comfort test. The effect of fabric weave, low stress mechanical properties, total hand value and stretch properties on fit and pressure comfort of silk/hybrid yarn stretch fabrics were analyzed. Sateen weave silk/hybrid yarn stretch fabric shows higher total hand value, stretch properties and better thermal comfort properties. Sateen and crepe weave stretch fabrics provided good fit. Sateen weave fabric exerted lower clothing pressure value in the range of 3-12 mmHg at all body locations in standing position and in different postures.     

Mechanical characterization of flocked fabric for automobile seat cover

In this study, the tensile and tearing properties of substrate, substrate with adhesive and flocked fabric were studied with developed regression model which explains the relationships between fabric forms and tensile and tearing strength of the flocked fabrics. Warp and weft tensile strengths of wet flocked fabric are generally higher than the warp and weft tensile strengths of dry flocked fabric due to the high wet properties of cotton yarn. Weft tensile elongation of the flocked fabric is generally higher than warp tensile elongation due to the higher crimp ratio of the flocked fabric in the weft direction. Warp and weft tearing strengths of wet form substrate with adhesive and flocked fabric are higher than those of dry forms of substrate with adhesive and flocked fabric. One of the reasons could be the decrease of inter-yarn frictional forces due to the lubrication effect of the wet form of acrylic adhesive in substrate with adhesive fabric. Generally, tearing strength of flocked fabric is low compared with substrate. It was concluded that the regression model used in this study could be viable and reliable tools and flocked fabric could be considered as an alternative seat cover material to use in automotive industry.     

Analysis and tensile characterization of air-entangled textured polyester woven fabrics depending on interlacement and yarn sets

The aim of this study was to understand the failure mechanism of two dimensional dry fabric structure considering yarn sets and interlacements. For this purpose, data generated on air-entangled textured polyester woven fabric under the simple tensile load and analyzed by developed regression model. The regression model showed that warp and weft directional tensile strengths of satin fabric were higher than those of plain and rib fabrics in unravel sample. This might be related to the number of interlacements of the fabrics. There was not a considerable difference between warp directional tensile strength of ravel and unravel satin fabrics, whereas weft directional tensile strength of ravel satin fabric decreased rapidly with respect to its unravel form. The satin fabric showed the highest warp directional tensile strength among the others. The lowest weft directional tensile strength was received from ribs fabric. In semi-ravel sample, all fabrics showed low warp and weft directional tensile strength values except in plain fabric. Warp directional tensile elongation of plain fabric was the highest in unravel sample. Satin fabric showed the highest warp directional tensile elongation in the ravel sample. Warp directional tensile elongations of all the fabrics in the semi-ravel sample became low. Weft directional tensile elongation of satin fabric was the highest in unravel sample. In addition, satin and plain fabrics showed the highest weft directional tensile elongations in the ravel sample. Weft directional tensile elongations of all the fabrics in the semi-ravel sample became low except in ribs fabric.     

Crimp analysis of worsted fabrics in the terms of fabric extension behaviour

Inside a woven fabric structure, warp and weft yarns acquire crimp as a result of yarns interlacing according to the weave pattern. Since warp and weft yarns are oriented in two perpendicular directions, applying tensile load in one direction causes extension in the load side and fabric contraction in the opposite direction. This process was investigated in this study by using an image processing procedure and it was found that fabric’s extension is in coincidence with yarn’s de-crimping process in the same direction. After the de-crimping stage, yarns in the load direction will be extended and at the same time crimp in the other direction will be increased, until jamming phenomenon happens in the fabric structure. The crimp interchange between warp and weft yarns follows a three-order polynomial function with a turning point in which the yarns in the load direction have no crimp.     

Mechanical properties of worsted fabrics for emotional garment to the rapier loom characteristics

This study examined the mechanical properties of worsted fabrics woven using various rapier weaving looms. For this purpose, the warp and weft yarn tensions during weaving were measured on the three types of rapier looms, and the fabric mechanical property changes due to the warp and weft tension differences were measured and analyzed according to the fabric position and particular rapier loom using the KES-FB system. The warp tension variation along the loom width direction in P-GTX loom showed the lowest value compared to FAST and THEMA looms. The warp tensions on the central part of the three types of looms were much higher than those on the left and right sides of the looms. The extensibility and bending rigidity of the fabric woven by P-GTX rapier loom showed lower values than those of FAST and THEMA looms, which appears to have originated from the low warp and weft weaving tensions of P-GTX rapier loom. On the other hand, the compressional property and shear modulus showed compromised results due to lateral deformation by compression and constraint deformation of the warp and weft by shear. The friction coefficient of the fabric surface woven by FAST loom showed the lowest value due to the flatter surface by the high warp tension. The mechanical properties of the fabric loaded by a high warp tension on the central part of the loom were also affected by the high weft yarn crimp due to the wider spacing between warp yarns by the higher warp tension during weaving, which makes the surface of the central part of the fabric flatter and smoother than the edge part of the fabric.     

Predicting the air permeability of polyester/cotton blended woven fabrics

The aim of this study was to model the air permeability of polyester cotton blended woven fabrics. Fabrics of varying construction parameters i.e. yarn linear densities and thread densities were selected and tested for air permeability, fabric areal density and fabric thickness. A total of 135 different fabric constructions were tested among which 117 were allocated for development of prediction model while the remaining were utilized for its validation. Four variables were selected as input parameters on basis of statistical analysis i.e. warp yarn linear density, weft yarn linear density, ends per 25 mm and picks per 25 mm. Response surface regression was applied on the collected data set in order to develop the prediction model of the selected variables. The model showed satisfactory predictability when applied on unseen data and yielded an absolute average error of 5.1 %. The developed model can be effectively used for prediction of air permeability of the woven fabrics.     

Weavability limit of yarns with thickness variation in shuttleless weaving

Theoretical weavability limit relationships of fabrics from regular warp yarns and fancy filling yarns with thickness variation in shuttleless weaving are reviewed. The relationships correlate maximum warp and filling cover factors, warp and filling yarn characteristics, the distribution of thick and thin places of filling yarn over the fabric surface, and the warp and filling weave factor. The research considers single filling feeder and multiple feeders cases. Additionally, comparisons between the weavability limit of regular yarns and fancy yarns in shuttle and shuttleless weaving are given.     

Effects of sample dimensions on pull-out properties of woven fabric structures

The aim of this study was to understand the effects of fabric sample dimensions on pull-out properties of fabric weaves. Polyester woven fabrics were used to conduct the pull-out tests. A yarn pull-out fixture was developed and data generated from this research. Yarn pull-out forces depend on sample dimensions, fabric density, fabric weave, and number of pulled ends in the fabric. Results showed that multiple and single yarn pull-out forces of long samples were higher than those of short samples, and the multiple yarn pull-out force was higher than that of the single yarn pull-out force, and dense fabric has high pull-out force. Plain fabric weave showed high single and multiple pull-out forces compared to ribs and satin fabric weaves. The regression model could be used in this study as a viable and reliable tool. This research could be valuable for development of multifunctional fabrics in technical textile applications.