Investigation of the reaction between 4-hydroxy-5-methyl-3(2H)-furanone and cysteine or hydrogen sulfide at pH 4.5

Reaction of 4-hydroxy-5-methyl-3(2H)-furanone (HMF) with cysteine or hydrogen sulfide at pH 4.5 for 60 min at 140 degrees C produced complex mixtures of volatile compounds, the majority of which contained sulfur. Sixty-nine compounds were identified, some tentatively, by GC/MS. These included disulfides (26), thiols (7), dithiolanones (6), thiophenones (4), dithianones (3), and thienothiophenes (6). The main non-sulfur compounds were 2, 3-pentanedione, 2,4-pentanedione, and 3,4-hexanedione. Both systems produced approximately the same total quantity of volatile compounds, but the reaction containing cysteine gave the larger number of individual compounds, with thiols quantitatively the dominant components. By comparison, the major products formed in the reaction with hydrogen sulfide were the dithiolanones. Reaction pathways are presented for the major products and, where applicable, possible reasons for the differences in composition of the two systems are discussed. The contribution of these reactions, and their products, to the flavor of roasted foods is considered.     

Effect of lipid composition on meat-like model systems containing cysteine, ribose, and polyunsaturated fatty acids

This paper compares the volatile constituents of model systems containing the important meat aroma precursors cysteine and ribose, with and without either methyl linoleate, an n-6 fatty acid, or methyl alpha-linolenate, an n-3 acid, both of which are present in meat. Many of the volatile compounds formed from the reaction between cysteine and ribose were not formed, or formed in lower amounts, when lipid was present. This may be due to the reaction between hydrogen sulfide, formed from the breakdown of cysteine, and lipid degradation products. In addition, cysteine and ribose modified lipid oxidation pathways, so that alcohols and alkylfurans were formed rather than saturated and unsaturated aldehydes. Several volatile compounds, which have been found at elevated levels in cooked meat from animals fed supplements high in n-3 acids, were formed when methyl alpha-linolenate reacted with cysteine and ribose. The possible effects of increasing the n-3 content of meat upon flavor formation during cooking are discussed.     

Formation of 2-alkyl-(2H)-thiapyrans and 2-alkylthiophenes in cooked beef and lamb

2-Alkyl-(2H)-thiapyrans and 2-alkylthiophenes have been identified in the volatiles of cooked beef and lamb. The quantities of both groups of compounds were higher in the meat of animals fed lipid supplements high in n-3 polyunsaturated fatty acids. 2-Alkyl-(2H)-thiapyrans were formed when (E,E)-2,4-dienals (C(6)-C(11)) and hydrogen sulfide were heated at 140 degrees C for 30 min. This confirmed their proposed route of formation in cooked meat from lipid-derived aldehydes and hydrogen sulfide; the latter was produced from the degradation of cysteine, via the Maillard reaction. The mass spectra and NMR spectra of these thiapyrans are reported for the first time. Although 2-alkyl-(2H)-thiapyrans were found to have only low odor potency, the reactions by which they are formed may have important implications for meat flavor. These reactions may remove potent aroma compounds and their intermediates from meat, thus modifying the overall aroma profile.     

Effect of urea on volatile generation from Maillard reaction of cysteine and ribose

Urea occurs naturally in many food products, and its presence affects food quality. However, little is known about its impact on flavor generation in food production. In this study, the urea contents in beef, pork, and chicken were determined. The effects of urea and pH on thermal flavor generation were investigated using the model system of cysteine with ribose, which was heated to the roasting temperature of 180 degrees C for 2 h at pH 5 and pH 8.5. The results revealed relatively large amounts of urea in these meats and demonstrated that pH affects aroma generation. Volatiles identified from the reaction system of ribose and cysteine showed that sulfur-containing compounds such as thiophenes, thiazoles, and thiophenethiols were the most abundant compounds. The addition of urea into the reaction mixture caused the disappearance or reduction in content of some sulfur-containing compounds but resulted in the generation of several important nitrogen-containing volatiles, like pyrazine, methylpyrazine, 2,5- (and 2,6-)dimethylpyrazine and other alkylpyrazines, which are known to elicit roasty, nutty flavor notes. A plausible explanation for this phenomenon is that ammonia can be released from urea upon heating and the formed ammonia competes with hydrogen sulfide to react with Maillard reaction precursors to produce nitrogen-containing compounds such as alkylpyrazines.     

Influence of pyrolytic and aqueous-phase reactions on the mechanism of formation of Maillard products

The influence of the reaction phase on the mechanism of formation of Maillard products was studied by comparison of (13)C-label incorporation patterns of the common products formed in model systems consisting of labeled glycine and D-glucoses subjected to both pyrolysis and heating in aqueous solutions. Pyrolysis experiments were performed at 250 degrees C for 20 s, and aqueous model systems were heated in sealed vials for 3 h at 120 degrees C followed by GC/MS analysis. Label incorporation patterns of the following compounds were analyzed: cyclotene, furanmethanol, acetylpyrrole, 5-methyl-pyrrole, trimethylpyrazine, acetic acid, 3-hydroxy-2-butanone, 2,3-butanedione, and 2-methyl-4, 5-dihydro-3(2H)-furanone. Although pyrolysis reaction produced higher number of products, however, the major pathways of formation of variety of important Maillard products followed the same mechanism under both pyrolytic and aqueous systems. Furthermore, contrary to literature speculations, 2-methyl-4, 5-dihydro-3(2H)-furanone was shown to be formed by ring contraction of 2,3-dihydro-3,5-dihydroxy-6-methyl-4(H)-pyran-4-one, through benzilic acid rearrangement, followed by decarboxylation.     

Inhibition of nitrification in soils by volatile sulfur compounds

Carbon disulfide, dimethyl disulfide, methyl mercaptan, dimethyl sulfide, and hydrogen sulfide retard nitrification of ammonium in soils incubated in closed systems. The inhibitory effects of these volatile sulfur compounds on nitrification decrease in the order listed. Hydrogen sulfide is a relatively weak inhibitor of nitrification, but carbon disulfide is considerably more effective than patented nitrification inhibitors (N-Serve. AM, and ST) for inhibition of nitrification in closed systems.It is concluded from the work reported that the inhibitory effects of methionine, cystine, cysteine, and other nonvolatile organic sulfur compounds on nitrification in soils may be at least partly due to decomposition of these compounds by soil microorganisms with formation of volatile sulfur compounds that retard nitrification.     

Inhibition of enzymatic browning of chlorogenic acid by sulfur-containing compounds

The antibrowning activity of sodium hydrogen sulfite (NaHSO(3)) was compared to that of other sulfur-containing compounds. Inhibition of enzymatic browning was investigated using a model browning system consisting of mushroom tyrosinase and chlorogenic acid (5-CQA). Development of brown color (spectral analysis), oxygen consumption, and reaction product formation (RP-UHPLC-PDA-MS) were monitored in time. It was found that the compounds showing antibrowning activity either prevented browning by forming colorless addition products with o-quinones of 5-CQA (NaHSO(3), cysteine, and glutathione) or inhibiting the enzymatic activity of tyrosinase (NaHSO(3) and dithiothreitol). NaHSO(3) was different from the other sulfur-containing compounds investigated, because it showed a dual inhibitory effect on browning. Initial browning was prevented by trapping the o-quinones formed in colorless addition products (sulfochlorogenic acid), while at the same time, tyrosinase activity was inhibited in a time-dependent way, as shown by pre-incubation experiments of tyrosinase with NaHSO(3). Furthermore, it was demonstrated that sulfochlorogenic and cysteinylchlorogenic acids were not inhibitors of mushroom tyrosinase.     

Formation of sulfur aroma compounds in reaction mixtures containing cysteine and three different forms of ribose

The headspace volatiles produced from buffered and unbuffered cysteine model systems, containing inosine 5'-monophosphate, ribose 5-phosphate, or ribose, were examined by GC-MS. Sulfur compounds dominated the volatiles of all systems and included mercaptoketones, furanthiols, and disulfides. The inosine monophosphate systems produced much lower quantities of volatiles than ribose phosphate or ribose systems. In the systems buffered with phosphate or phthalate buffers, both ribose and ribose phosphate systems gave similar quantities of sulfur volatiles. However, in the absence of buffer, the ribose system was relatively unreactive, especially for volatiles formed via the 2,3-enolization route in the Maillard reaction, where 4-hydroxy-5-methyl-3(2H)-furanone is a key intermediate. A number of keto-enol tautomerisms, which are known to be acid-base-catalyzed, occur in the 2,3-enolization route. This may explain the catalysis of the ribose systems by the buffers. In the ribose phosphate systems, however, Maillard mechanisms probably played a less important role, because ribose 5-phosphate readily dephosphorylated to give 4-hydroxy-5-methyl-3(2H)-furanone on heating and thus provided an easier route to aroma compounds than the Maillard reaction.     

Analysis of a model reaction system containing cysteine and (E)-2-methyl-2-butenal, (E)-2-hexenal, or mesityl oxide

Cysteine conjugates, resulting from the addition of cysteine to alpha,beta-unsaturated carbonyl compounds, are important precursors of odorant sulfur compounds in food flavors. The aim of this work was to better understand this chemistry in the light of the unexpected double addition of cysteine to two unsaturated aldehydes. These reactions were studied as a function of pH. When (E)-2-methyl-2-butenal (tiglic aldehyde, 4) was treated with cysteine in water at pH 8, the major product formed was the new compound (4R)-2-(2-[[(2R)-2-amino-2-carboxyethyl]thio]methylpropyl)-1,3-thiazolidine-4-carboxylic acid (6). Under acidic conditions (pH 1), we also observed a double addition, but the second cysteine was linked by a vinylic sulfide bond to form the previously unreported major product, (2R,2'R,E)-S,S'-(2,3-dimethyl-1-propene-1,3-diyl)bis-cysteine (7). When (E)-2-hexenal (12) was treated with cysteine under acidic conditions, the major product was the novel (4R,2' 'R)-2-[2'-(2' '-amino-2' '-carboxyethylthio)pentyl]-1,3-thiazolidine-4-carboxylic acid (13), and the formation of an vinylic sulfide compound analogous to 7 was not observed. Reduction of the acidic crude reaction mixture with NaBH(4) afforded 13 and the cysteine derivative (R)-S-[1-(2-hydroxyethyl)butyl]cysteine (14) in 14% yield. Treating (E)-2-hexenal with cysteine at pH 8 followed by NaBH(4) reduction yielded the new product (3R)-7-propylhexahydro-1,4-thiazepine-3-carboxylic acid (15). Addition of cysteine to mesityl oxide (16), at pH 8, followed by reduction with NaBH(4) furnished (R)-S-(3-hydroxy-1,1-dimethylbutyl)cysteine (3) and the new compound (3R)-hexahydro-5,7,7-trimethyl-1,4-thiazepine-3-carboxylic acid (18).     

Model studies on the pattern of volatiles generated in mixtures of amino acids, lipid-oxidation-derived aldehydes, and glucose

The development of flavor and browning in thermally treated foods results mainly from the Maillard reaction and lipid degradation but also from the interactions between both reaction pathways. To study these interactions, we analyzed the volatile compounds resulting from model reactions of lysine or glycine with aldehydes originating from lipid oxidation [hexanal, (E)-2-hexenal, or (2E,4E)-decadienal] in the presence and absence of glucose. The main reaction products identified in these model mixtures were carbonyl compounds, resulting essentially from amino-acid-catalyzed aldol condensation reactions. Several 2-alkylfurans were detected as well. Only a few azaheterocyclic compounds were identified, in particular 5-butyl-2-propylpyridine from (E)-2-hexenal model systems and 2-pentylpyridine from (2E,4E)-decadienal model reactions. Although few reaction products were found resulting from the condensation of an amino acid with a lipid-derived aldehyde, the amino acid plays an important role in catalyzing the degradation and further reaction of these carbonyl compounds. These results suggest that amino-acid-induced degradations and further reactions of lipid oxidation products may be of considerable importance in thermally processed foods.     

Analysis of furanone, pyranone, and new heterocyclic colored compounds from sugar-glycine model Maillard systems

Aqueous sugar (xylose or glucose)-glycine model systems were refluxed for 2 h with the pH maintained at 5. Reverse-phase HPLC of the total reaction products gave two resolved peaks (one of which was colored) for the xylose system and five resolved peaks (two of which were colored) for the glucose system. The components responsible for these peaks were isolated from the ethyl acetate extracts by semipreparative HPLC. Using mainly NMR, the colored compound from the xylose system was identified as the new 2-acetyl-6-(hydroxymethyl)-5,6-dihydro-4H-pyridinone. The colored compounds from the glucose system were most likely to be two novel cis/trans ring isomers of the related new compound 2-acetyl-6-hydroxy-7-(hydroxymethyl)-1,5,6,7-tetrahydro-4H-azepinone+ ++. These compounds are the first one-ring structures isolated from sugar-amino acid model systems that are reported to be colored. Two of the colorless components of the glucose system were identified, mainly by NMR experiments, as the related compounds 4-hydroxy-2-(hydroxymethyl)-5-methyl-3(2H)-furanone and 2, 3-dihydro-3,5-dihydroxy-6-methyl-4H-pyranone. The remaining compound from the glucose system and the colorless compound from the xylose system were identified as 5-(hydroxymethyl)furfural and 4-hydroxy-5-methyl-3(2H)-furanone, respectively.     

Manothermosonication of foods and food-resembling systems: effect on nutrient content and nonenzymatic browning

The effect of manothermosonication (MTS), an emergent technology for food preservation, on thiamin, riboflavin, carotenoids, and ascorbic acid was evaluated in milk and orange juice. The effect of both heat treatment and MTS on several compounds produced in nonenzymatic browning in model systems was also studied. MTS does not affect significantly the nutrient content studied. However, it changes the behavior of nonenzymatic browning. No formation of 5-(hydroxymethyl)-2-furfuraldehyde (HMF) was detected in fruit juice model systems after heat and MTS treatments at the experimental conditions used. In a milk-resembling system, free HMF formation by MTS is higher compared to that by heat treatment. As the MTS temperature increases, free HMF production by both treatments equaled on another. For bound HMF the production rate is lower by MTS than by heat treatment under the experimental conditions used. Formation kinetics of brown pigments and that of fluorescent compounds are different for both treatments. Fluorescence and brown pigment production are faster in MTS.     

Thermal decomposition of 5-(hydroxymethyl)-2-furaldehyde (HMF) and its further transformations in the presence of glycine

Thermal decomposition of HMF has been so far studied indirectly through carbohydrate degradation reactions assuming HMF as the main product. Such studies, however, do not necessarily generate relevant information on HMF decomposition because many other products are generated simultaneously. Direct thermal decomposition using different concentrations of HMF in silica gel was studied using pyrolysis-GC-MS. Undiluted HMF generated four peaks corresponding to 5-methylfurfural, 2,5-furandicarboxaldehdye, HMF, and a major unknown peak at retention time of 20.73 min. The diluted HMF in silica gel (15-fold) generated only the first three peaks. The generation of the unknown peak was dependent on the concentration of HMF, indicating the possibility of a dimeric structure; furthermore, when HMF was generated from [U-13C6]glucose in the reaction mixture, the highest mass in the spectrum of the unknown peak showed the incorporation of 11 carbon atoms from the glucose. Thermal decomposition studies of HMF have also indicated that in the absence of amino acids it can mainly dimerize and the initially formed dimer can degrade to generate 5-methylfurfural and 2,5-furandicarboxaldehyde. On the other hand, thermal degradation of HMF in the presence of glycine generated Schiff base adducts of HMF, 5-methylfurfural, and 2,5-furandicarboxaldehdye in addition to 2-acetyl-5-methylfuran and a newly discovered adduct, 5-[(dimethylamino)methyl]-2-furanmethanol.     

Characterization of the most odor-active compounds of Iberian ham headspace

Gas chromatography-olfactometry (GC-O) based on detection frequency (DF) was used to characterize the most odor-active compounds from the headspace of Iberian ham. Twenty-eight odorants were identified by GC-O on two capillary columns, including aldehydes (11), sulfur-containing compounds (7), ketones (5), nitrogen-containing compounds (2), esters (2), and an alcohol. Among them, the highest odor potencies (DF values) were found for 2-methyl-3-furanthiol, 2-heptanone, 3-methylbutanal, methanethiol, hexanal, hydrogen sulfide, 1-penten-3-one, 2-methylpropanal, ethyl 2-methylbutyrate, and (E)-2-hexenal. Nine of the 28 most odor-active compounds were identified for the first time as aroma components of dry-cured ham, including hydrogen sulfide, 1-penten-3-one, (Z)-3-hexenal, 1-octen-3-one, and the meaty-smelling compounds 2-methyl-3-furanthiol, 2-furfurylthiol, 3-mercapto-2-pentanone, 2-acetyl-1-pyrroline, and 2-propionyl-1-pyrroline.     

Evolution of volatile sulfur compounds from soils treated with sulfur-containing organic materials

Release of volatile S compounds from soils treated with S-containing organic materials was studied by sensitive gas chromatographic techniques. Methyl mercaptan, dimethyl sulfide, dimethyl disulfide, carbonyl sulfide and carbon disulfide were identified as gaseous products of decomposition of animal manures, sewage sludges and plant materials in soils under aerobic or waterlogged conditions. No release of hydrogen sulfide was detected. Most of the S volatilized from soils treated with sludges was in the form of dimethyl sulfide and dimethyl disulfide. whereas most of the S volatilized from soils treated with manures and plant materials was in the form of methyl mercaptan and dimethyl sulfide. More S compounds were released, and more S was volatilized, by decomposition of manures, sludges or plant materials in soils under waterlogged conditions than by decomposition under aerobic conditions. When calculated as a percentage of the S added as organic material, the average amount of S volatilized under aerobic or waterlogged conditions was < 0.2% < 0.5% and < 3.4% for the sludges, manures and plant materials, respectively. The five volatile S compounds produced by decomposition of manures, sludges and plant materials in soils under aerobic and waterlogged conditions also were produced by decomposition of plant proteins (zein, gluten and gliadin). It is concluded that the volatile S compounds released by decomposition of the above organic materials in soils are largely, if not entirely, produced by microbial degradation of methionine and cystine in these materials.     

Characterization of volatile compounds from the reaction of 3-hydroxy-2-butanone and ammonium sulfide model system

The reactions between 3-hydroxy-2-butanone and ammoniun sulfide at 25, 50, 75, 100, 125, and 150 degrees C were studied. Four well-known flavor compounds, 2,4,5-trimethyloxazole, 2,4, 5-trimethyl-3-oxazoline, 2,4,5-trimethylthiazole, and 2,4, 5-trimethyl-3-thiazoline, were identified. Another four interesting intermediate compounds, 2-(1-hydroxyethyl)-2,4, 5-trimethyl-3-oxazoline, 2-(1-mercaptoethyl)-2,4, 5-trimethyl-3-oxazoline, 2-(1-hydroxyethyl)-2,4, 5-trimethyl-3-thiazoline, and 2-(1-mercaptoethyl)-2,4, 5-trimethyl-3-thiazoline, were also identified by GC-EIMS and GC-CIMS. All these intermediate compounds were formed at 25 degrees C. On the other hand, tetramethylpyrazine was the major product with a reaction temperature higher than 100 degrees C.     

Effect of temperature and pH on the generation of flavor volatiles in extrusion cooking of wheat flour

Extrusion temperature (120, 135, and 150 degrees C) and quantity of added sodium hydroxide (0, 3, and 6 g/kg feedstock) were used as variables to study flavor generation in extrusion cooking of wheat flour. In total, 127 volatile components were identified in the extrudates, of which 51 contained sulfur. The levels of pyrroles, thiophenes, thiophenones, thiapyrans, and thiazolines increased at higher extrusion temperatures, whereas furans and aldehydes decreased. The addition of sodium hydroxide also affected the formation of volatile compounds. However, thiophenes, thiophenones, polythiacycloalkanes, thiazoles, thiazolines, pyrroles, and some pyrazines tended to increase with the more alkaline extrusion conditions. Some compounds from lipid-Maillard interactions were identified in the extrudates. Analysis of the volatile components by gas chromatography-olfactometry showed sulfur- and nitrogen-sulfur-containing heterocycles as possible contributors to the sulfury and rubbery odors observed in extrudates produced at the higher temperature and more alkaline conditions.     

Reinvestigation of the reaction between 2-furancarboxaldehyde and 4-hydroxy-5-methyl-3(2H)-furanone

The reaction between 2-furancarboxaldehyde and 4-hydroxy-5-methyl-3(2H)-furanone was reinvestigated as a part of a systematic study on low molecular weight colored compounds from the Maillard reaction. In acetic acid/piperidine, besides 2-(2-furanylmethylene)-4-hydroxy-5-methyl-3(2H)-furanone (1) and 5-[2-(2-furanyl)ethenyl]-2-(2-furanylmethylene)-4-hydroxy-5-methyl -3( 2H)-furanone (2), four novel compounds, 15a, 15b, 16a, and 16b, were isolated and characterized. These compounds are produced from two molecules of furanone 1 and one molecule of 2-furancarboxaldehyde, and a mechanism is proposed for their formation. Compounds 1, 15a, 15b, 16a, and 16b are formed also by reacting 2-furancarboxaldehyde and 4-hydroxy-5-methyl-3(2H)-furanone in water at pH 3 and 2, whereas 2 was never detected. The formation of these compounds was studied also in xylose/lysine and xylose/glycine model systems.     

Formation of volatile sulfur compounds by microbial decomposition of sulfur-containing amino acids in soils

Evolution of volatile sulfur compounds from soils treated with S-containing amino acids was studied by sensitive gas chromatographic techniques involving use of a flame photometric detector fitted with a sulfur filter. The following volatile sulfur compounds were identified as products of microbial decomposition of S-containing amino acids in soils under aerobic or waterlogged conditions: methyl mercaptan, dimethyl sulfide and dimethyl disulfide (evolved from soils treated with methionine, methionine sulfoxide, methionine sulfone or S-methyl cysteine); ethyl mercaptan, ethyl methyl sulfide and diethyl disulfide (evolved from soils treated with ethionine or S-ethyl cysteine); and carbon disulfide (evolved from soils treated with cystine, cysteine, lanthionine or djenkolic acid). Small amounts of dimethyl sulfide and carbon disulfide were evolved from soils treated with homocystine, and trace amounts of carbonyl sulfide were evolved from soils treated with lanthionine or djenkolic acid. No volatile sulfur compounds were evolved from soils treated with cysteic acid, taurine, or S-methyl methionine. The amounts of sulfur volatilized from soils treated with the 14 S-containing amino acids studied represented from less than 0·1 per cent to more than 50 per cent of the sulfur added as amino acid. Hydrogen sulfide could not be detected as a gaseous product of microbial decomposition of S-containing amino acids in soils under aerobic or waterlogged conditions.     

Reversible and covalent binding of 5-(hydroxymethyl)-2-furaldehyde (HMF) with lysine and selected amino acids

The chemical reactivity of 5-(hydroxymethyl)-2-furaldehyde (HMF) with lysine, glycine, and proline was studied using isotope labeling technique. To confirm the formation of HMF adducts in glucose amino acid model systems, a useful strategy was developed in which products simultaneously possessing six glucose (HMF moiety) and any number of amino acid carbon atoms in addition to nitrogen were targeted using specifically labeled precursors such as [(15)N(α)]lysine·2HCl, [(15)N(ε)]lysine·2HCl, [U-(13)C(6)]lysine·2HCl, [(13)C(6)]lysine·2HCl, and [U-(13)C(6)]glucose in the case of lysine model system. In addition, model systems containing HMF and amino acids were also studied to confirm specific adduct formation. Complete labeling studies along with structural analysis using appropriate synthetic precursors such as HMF Schiff base adducts of piperidine and glycine have indicated that HMF generated in the glucose/amino acid model systems initially forms a Schiff base adduct that can undergo decarboxylation through an oxazolidin-5-one intermediate and form two isomeric decarboxylated Schiff bases. Unlike the Schiff bases resulting from primary amines or amino acids such as glycine or lysine, those resulting from secondary amino acids such as proline or secondary amines such as piperidine can further undergo vinylogous Amadori rearrangement, forming N-substituted 5-(aminomethyl)furan-2-carbaldehyde derivatives.