QTL analysis of cooked rice grain elongation, volume expansion, and water absorption using a recombinant inbred population

The traits of elongation, volume expansion, and water absorption are very important in determining the quality of cooked rice grains. In this study, quantitative trait loci (QTL) analysis of these traits was performed using a recombinant inbred population derived from a cross between two indica cultivars, ‘Zhenshan 97’ and ‘Minghui 63 ,’ which are the parents of the most widely grown hybrid rice in China. Using a linkage map based on 221 molecular marker loci covering a total of 1796 cM, a total of 33 QTLs were identified for the nine traits tested. QTLs were detected on chromosomes 1– 3 , 5– 9 , and 11 , respectively. The QTLs identified included three for cooked rice grain length elongation (chromosomes 2 , 6 , and 11), six for width expansion (chromosomes 1‐ 3 , 6 , 9 , and 11) and two for water absorption (chromosomes 2 and 6). Interestingly, a single QTL located near the wx gene on chromosome 6 seemed to influence all the traits tested for the cooked rice quality.     

利用BC2F2高代回交群体定位水稻籽粒大小和形状QTL

以我国优良籼稻恢复系蜀恢527为轮回亲本, 以来自菲律宾的Milagrosa为供体亲本, 培育了样本容量为199株的BC₂F₂高代回交群体。选取85个均匀分布在12条染色体上的多态性SSR标记进行基因型分析, 同时对粒长、粒宽、长宽比和千粒重4种性状进行了表型鉴定。采用性状－标记间的单向和双向方差分析对上述性状进行了QTL定位。单向方差分析(P<0.01)共检测到了10个控制粒长、粒宽、长宽比和千粒重的QTL, 其中有3个具有多效性。由于粒长和长宽比的高度相关性, 控制长宽比的2个QTL均能在粒长QTL中检测到。位于第3染色体着丝粒区域的qgl3b是一个控制粒长、长宽比和千粒重的主效QTL, 它可以分别解释粒长、长宽比和千粒重表型变异的29.37%、26.15%和17.15%。该QTL对于粒长、长宽比和千粒重均表现较大的加性效应(来自蜀恢527的等位基因为增效)和负向超显性。位于第8染色体的qgw8位点是一个控制粒宽的主效QTL, 同时也是控制千粒重的微效QTL, 能解释粒宽表型变异的21.47%和千粒重表型变异的5.16%。该QTL对粒宽和千粒重均具有较大的加性效应(来自蜀恢527的等位基因为增效)和正向部分显性。双向方差分析(P<0.005)共检测到61对显著的上位性互作, 涉及54个QTL, 其中23个是能同时影响2~4个性状的多效位点, 且有8个位点与单向方差分析检测到的相同。控制长宽比的13对上位性互作位点中, 与控制粒长的上位性互作位点完全相同的有8对。以上结果为进一步开展水稻籽粒大小和形状有利基因的精细定位、克隆和分子设计育种奠定了基础。     

Quantitative trait locus mapping of floral and related traits using an F2 population of Aquilegia

The objective of this study was to determine quantitative trait loci (QTL) underlying ten floral and related traits in Aquilegia. The traits assessed were calyx diameter, corolla diameter, petal length, petal blade length, sepal length, sepal width, spur length, spur width, plant height and flower number. These are important traits for ornamental value and reproductive isolation of Aquilegia. QTL analysis of these traits was conducted using single‐marker analysis and composite interval mapping (CIM). We used an F₂ population consisting of 148 individuals derived from a cross between the Chinese wild species Aquilegia oxysepala and the cultivar Aquilegia flabellata ‘pumila’. Resulting CIM analysis identified 39 QTLs associated with these traits, which were mapped on seven linkage groups. These QTLs could explain 1.22–53.28% of the phenotypic variance. Thirty‐one QTLs, which explained more than 10% of the phenotypic variation, were classified as major QTLs. Graphical representations of the QTLs on seven linkage groups were made. Our research provides the potential for future molecular assisted selection breeding programmes and the cloning of target genes through fine mapping.     

利用BC2F2高代回交群体定位水稻籽粒大小和形状QTL

以我国优良籼稻恢复系蜀恢527为轮回亲本, 以来自菲律宾的Milagrosa为供体亲本, 培育了样本容量为199株的BC₂F₂高代回交群体。选取85个均匀分布在12条染色体上的多态性SSR标记进行基因型分析, 同时对粒长、粒宽、长宽比和千粒重4种性状进行了表型鉴定。采用性状－标记间的单向和双向方差分析对上述性状进行了QTL定位。单向方差分析(P<0.01)共检测到了10个控制粒长、粒宽、长宽比和千粒重的QTL, 其中有3个具有多效性。由于粒长和长宽比的高度相关性, 控制长宽比的2个QTL均能在粒长QTL中检测到。位于第3染色体着丝粒区域的qgl3b是一个控制粒长、长宽比和千粒重的主效QTL, 它可以分别解释粒长、长宽比和千粒重表型变异的29.37%、26.15%和17.15%。该QTL对于粒长、长宽比和千粒重均表现较大的加性效应(来自蜀恢527的等位基因为增效)和负向超显性。位于第8染色体的qgw8位点是一个控制粒宽的主效QTL, 同时也是控制千粒重的微效QTL, 能解释粒宽表型变异的21.47%和千粒重表型变异的5.16%。该QTL对粒宽和千粒重均具有较大的加性效应(来自蜀恢527的等位基因为增效)和正向部分显性。双向方差分析(P<0.005)共检测到61对显著的上位性互作, 涉及54个QTL, 其中23个是能同时影响2~4个性状的多效位点, 且有8个位点与单向方差分析检测到的相同。控制长宽比的13对上位性互作位点中, 与控制粒长的上位性互作位点完全相同的有8对。以上结果为进一步开展水稻籽粒大小和形状有利基因的精细定位、克隆和分子设计育种奠定了基础。     

不同环境基于高密度遗传图谱的稻米外观品质QTL定位

为解析稻米外观品质遗传基础, 挖掘稳定存在的控制稻米外观品质性状的QTL, 本研究以籼稻品种V20B和爪哇稻品种CPSLO17作为亲本, 构建包含150个重组自交家系(recombinantion inbred line, RIL)的RIL作图群体, 进行外观品质性状QTL定位分析。利用特定位点扩增长度测序(SLAF-seq)技术, 构建了一个由12个连锁群包含8602个标记, 平均间距为0.29 cM的高密度遗传图谱。采用IciMapping 4.0软件的ICIM-ADD方法在3种环境(贵阳、贵定、三亚)对4个外观品质性状(粒长、粒宽、垩白度和垩白粒率)进行QTL (quantitative trait locus)定位分析。结果表明: 3种环境共检测到9个粒长QTL、6个粒宽QTL、3个垩白度QTL和4个垩白粒率QTL; 有5个QTL在多个环境被重复检测到, 其中3种环境都定位到的粒宽QTL qGW5-1和垩白度QTL qCha5-1为同一定位区间(第5染色体的Marker1642127-Marker1514505); 此外, 垩白度QTL qCha5-2的定位区间(Marker1554573-Marker1554589)和垩白粒率QTL qCGP5-2也是一样的。序列比对发现QTL qCha5-1定位区间仅51.5 kb, 是新的垩白性状主效QTL。本研究结果不仅为挖掘新的外观品质性状基因奠定基础, 也有助于开发新的分子标记进行水稻外观品质性状遗传改良。     

大豆叶片性状QTL的定位及Meta分析

利用Charleston×东农594重组自交系构建SSR遗传图谱,采用WinQTLCartographer Ver. 2.5软件的CIM和MIM分析方法对2006—2010年(F_2:14~F_2:18)连续5年的大豆叶长、叶宽以及叶柄长数据进行QTL定位,检测到8个与叶长有关的QTL,位于染色体Gm01、02、05、11和18上;9个与叶宽有关的QTL,位于染色体Gm01、03、05、06、11、12和16上;8个与有关叶柄长的QTL,位于染色体Gm01、03、05、06、11、17和18上。2年以上均检测到的叶长QTL为qLL5a、qLL5b、qLL1a和qLL18;叶宽QTL为qLW5a、qLW11a、qLW11b和qLW12;叶柄长QTL为qLSL11b。另外,利用BioMercator2.1的映射功能将国内外常用的大豆图谱上的叶长、叶宽QTL通过公共标记映射整合到大豆公共遗传连锁图谱Soymap2上,将搜集到的35个叶长QTL、37个叶宽QTL和本研究得到的QTL整合分析,最终得到5个大豆叶长的“通用”QTL,位于Gm09、18和19,其置信区间最小可达5.66 cM;4个大豆叶宽的“通用”QTL,位于Gm07、Gm18和Gm19,其置信区间最小可达5.67 cM,为今后对大豆叶片性状QTL精细定位, 提供了有利科学信息。     

Quantitative trait loci for adventitious and lateral roots in rice

The mass of a root is determined by two underlying morphogenetic factors: (1) the length of the main root axis (root axis length: RAL), and (2) the amount of lateral root development generated by a unit length of the axis (branching index: BI). The mass of a rice adventitious root was partitioned into these two factors at the quantitative trait locus (QTL) level, using ‘Akihikari’ (a lowland cultivar as a recurrent parent) × ‘IRAT 109’ (an upland cultivar) backcross inbred lines. Four QTLs were detected for the dry weight of individual adventitious roots (root dry weight: RDW), which were associated with a QTL for RAL (chromosomes 1 and 9) or a QTL for BI (chromosomes 6 and 11). For BI, an additional QTL was detected on chromosome 1. The absence of co‐located QTLs suggested that RAL and BI are under separate genetic control. Despite its small population size and few replications, this study suggests that the partitioning of root mass into these underlying components could be useful for understanding the complexity involved in the genetic control of root growth.     

QTL analysis of quality traits in the spring wheat cross RL4452 × 'AC Domain'

Wheat grain quality is a complex group of traits of tremendous importance to wheat producers, end‐users and breeders. Quantitative trait locus (QTL) analysis studied the genetics of milling, mixograph, farinograph, baking, starch and noodle colour traits in the spring wheat population RL4452/‘AC Domain’. Forty‐seven traits were measured on the population and 99 QTLs were detected over 18 chromosomes for 41 quality traits. Forty‐four of these QTLs mapped to three major QTL clusters on chromosomes 1B, 4D, and 7D. Fourteen QTLs mapped near Glu‐B1, 20 QTLs mapped near a major plant height QTL on chromosome 4D, and 10 QTLs mapped near a major time to maturity QTL on chromosome 7D. Large QTLs were detected for grain and flour protein content, farinograph absorption, mixograph parameters, and dietary fibre on chromosome 2BS. QTLs for yellow alkaline noodle colour parameter L* mapped to chromosomes 5B and 5D, while the largest QTL for the b* parameter mapped to 7AL.     

Quantitative trait loci for grain-quality traits across a rice F2 population and backcross inbred lines

Improving grain-quality is an important goal in rice breeding programs. One vital step is to find major quantitative trait loci (QTLs) for quality related traits and then investigate the relationships among them. We crossed ‘N22’, an indica variety with good appearance but low grain weight, to a japonica variety, ‘Nanjing35’, with superior grain yield but poor appearance. This enabled us to construct an F₂ population and a set of backcross inbred lines (BILs) for QTL-mapping for the traits related grain appearance. In all, 37 QTLs were identified for grain length (GL), grain width (GW), grain thickness (GT), thousand-grain weight (TGW), and the percentage of grains with chalkiness (PGWC). Of these, 17 QTLs detected from 184 plants in the F₂ population explained 4.97–27.26 % of the phenotypic variance, another 20 QTLs were identified using BILs from 2009 to 2010. Quantitative trait loci for major effects were detected in different populations and across years. A new QTL hot spot (marker interval RM504–RM520) was found on Chromosome 3, which harbored QTLs for GL, GW, GT, and TGW. Among our five examined traits, grain shape was significantly correlated with TGW and PGWC. The PGWC values of two heavier grains BILs, L93, and L145 are much lower than Nanjiing35, the analysis of genotype showed that this greater weight may due to the locus for GL occurring within RM504–RM520 on Chromosome 3. Therefore, those two lines will allow us to develop a long-grain high-yield rice variety with less chalkiness.     

优良水稻染色体片段代换系Z746的鉴定及重要农艺性状QTL定位及其验证

粒型、株高及穗部组成性状与产量形成密切相关,是水稻重要农艺性状,但遗传基础复杂。染色体片段代换系是用于复杂性状遗传研究的良好材料。本研究鉴定了一个以日本晴为受体、西恢18为供体亲本的水稻优良染色体片段代换系Z746。Z746携带来自西恢18的7个代换片段,平均代换长度为3.99 Mb,其株高、粒长和穗部性状均与受体存在显著差异。进一步通过日本晴与Z746杂交构建的次级F2群体共检测到36个相关QTL,分布于2号、3号、4号、6号和11号染色体。其中5个可能与已克隆基因等位,如qPH3-1等, 8个可被多次检出,表明这些是遗传稳定的主效QTL。Z746的粒长主要由4个QTL(qGL3、qGL4、qGL2、qGL6)控制,其中qGL3和qGL4对粒长变异的贡献率分别为60.28%和27.47%。株高由5个QTL控制,穗长由4个QTL控制,每穗粒数由2个QTL控制,千粒重由2个QTL控制。然后以MAS在F3共选出8个单片段代换系,并以此在F4进行了相关QTL验证,共有24个QTL可被8个单片段代换系(SSSL)检出,重复检出率为66.7%,表明这些QTL遗传稳定。本研究为目的 QTL的进一步...     

Genetic and QTL analyses of yield and a set of physiological traits in pepper

An interesting strategy for improvement of a complex trait dissects the complex trait in a number of physiological component traits, with the latter having hopefully a simple genetic basis. The complex trait is then improved via improvement of its component traits. As first part of such a strategy to improve yield in pepper, we present genetic and QTL analyses for four pepper experiments. Sixteen traits were analysed for a population of 149 recombinant inbred lines, obtained from a cross between the large-fruited pepper cultivar ‘Yolo Wonder’ (YW) and the small fruited pepper ‘Criollo de Morelos 334’ (CM334). The marker data consisted of 493 markers assembled into 17 linkage groups covering 1,775 cM. The trait distributions were unimodal, although sometimes skewed. Many traits displayed heterosis and transgression. Heritabilities were high (mean 0.86, with a range between 0.43 and 0.96). A multiple QTL mapping approach per trait and environment yielded 24 QTLs. The average numbers of QTLs per trait was two, ranging between zero and six. The total explained trait variance by QTLs varied between 9 and 61 %. QTL effects differed quantitatively between environments, but not qualitatively. For stem-related traits, the trait-increasing QTL alleles came from parent CM334, while for leaf and fruit related traits the increasing QTL alleles came from parent YW. The QTLs on linkage groups 1b, 2, 3a, 4, 6 and 12 showed pleiotropic effects with patterns that were consistent with the genetic correlations. These results contribute to a better understanding of the genetics of yield-related physiological traits in pepper and represent a first step in the improvement of the target trait yield.     

Identification of a novel QTL for the number of spikelets per panicle using a cross between indica‐ and japonica‐type high‐yielding rice cultivars in Japan

Yield is a complex trait. To improve it, the accumulation of the favourable alleles of valuable genes is required for each yield‐related trait. In this study, we used two high‐yielding rice cultivars developed in Japan, indica‐type ‘Takanari’ and japonica‐type ‘Momiroman’, for a genetic analysis of the sink capacity‐related traits. An F₂ population showed transgressive segregation for the number of spikelets per panicle. Quantitative trait locus (QTL) analysis detected four QTLs for the trait. Two of the QTLs were most likely identical to previously cloned GN1a and APO1, and their Takanari alleles had positive effects. The Momiroman alleles of the other two QTLs had positive effects, and one of these QTLs was most likely identical to SPIKE/GPS. The QTL on the long arm of chromosome 3 appeared to be novel; it clustered with QTLs for grain length and days‐to‐heading. Substitution mapping revealed that the close linkage of QTLs caused the clustering. These results suggest that the combination of the favourable alleles of detected QTLs could lead to greater sink capacity than that of the parental cultivars.     

QTL mapping of sheath blight resistance in a deep-water rice cultivar

Sheath blight, caused by the pathogen Rhizoctonia solani Kühn, is one of the most serious diseases of rice and leads to severe yield loss worldwide. A recombinant inbred line (RIL) population consisting of 121 lines was constructed from a cross between HH1B and RSB03, the latter of which is a deep-water rice variety. Five traits were used to evaluate sheath blight resistance, namely disease rating (DR), lesion length (LL), lesion height (LH), relative lesion length [RLL, the ratio of LL to plant height (PH)], and relative LH (RLH, the ratio of LH to PH). Using the RIL population and 123 molecular markers, we identified 28 quantitative trait loci (QTLs) for the five traits in two environments. These QTLs are located on nine chromosomes and most of them are environment specific. A major QTL for DR (qSBR1) on chromosome 1 was identified with contributions of 12.7% at Shanghai and 42.6% at Hainan, and it collocated with a QTL for PH. The allele at this locus from RSB03 enhances sheath blight resistance and increases PH. Another QTL for DR on chromosome 7 was adjacent to QTLs for heading date (HD) and four other disease traits. RSB03 also carries the resistant allele at this locus and shortens HD. The susceptible parent, HH1B, provides the resistance allele at the locus qSBR8, where QTLs for four other disease traits were identified. QTL mapping results showed that most QTLs for LL, LH, RLL, and RLH are collocated with QTLs for DR. Three QTLs for DR are independent from HD, PH, and four other disease traits, while four QTLs are closely related to HD and PH. Four QTLs for LL, LH, RLL, and RLH are independent from DR, HD, and PH, while there is only one region harboring QTLs for these four traits and HD. Correlation analysis and QTL mapping results indicated that LL, LH, RLL, and RLH might be important indices, like DR, for evaluating the level of resistance to rice sheath blight.     

QTL mapping of seedling traits in cucumber using recombinant inbred lines

Seedling traits are important for development, flower bud differentiation, fruit production and fruit quality of cucumber (Cucumis sativus L.). In this study, 160 recombinant inbred lines (RILs), derived from crossing wild cucumber inbred line PI 183967 (C. sativus var. hardwickii) with ‘931’ northern China cultivated cucumber inbred line 931, were employed to identify quantitative trait loci (QTLs) of cotyledon length (Cl), cotyledon width (Cw), hypocotyl length (Hl), first true leaf length (Fll), first true leaf width (Flw), aboveground fresh biomass (Afb) and aboveground dry biomass (Adb) at seedling stage. A genetic map including 307 SSR markers was developed which spanned 993.3 cM, with an average genetic distance of 3.23 cM between adjacent markers. 36 QTLs associated with the seven traits were detected on chromosomes 1, 2, 3, 5 and 6 in four environments (spring and autumn of 2012 and 2013), explaining 6.1 to 23.6% of the observed phenotypic variations. Among the 36 QTLs, 21 were responsible for more than 10% of observed phenotypic variations. We obtained 2, 2, 1 and 3 QTL loci for the traits of Fll, Flw, Afw and Adw, respectively. In addition, genes in the genetic region spanned by SSR15321‐SSR07711 on chr. 5 may contribute to Flw, Afw and Adw.     

陆地棉光合相关性状的QTL定位分析

光合作用是棉花产量的主要物质来源。本研究以高光效陆地棉冀优861和低光效陆地棉新陆早25号为亲本组配的196个F₂单株为作图群体,利用SSR（Simple Sequence Repeat）标记构建陆陆杂交遗传连锁图谱,共有30个标记位点连锁,包含4个连锁群,全长244.4cM。利用QTL IciMapping 4.1软件的完备区间作图法对冀优861×新陆早25号F_2:3家系的光合相关性状进行QTL作图分析,共定位到光合相关5个性状的10个QTLs,其中1个光合速率QTL和1个胞间CO₂浓度QTL分别定位在D3和D7染色体上。本研究为棉花光合相关性状QTL的精细定位及分离克隆打下基础,为聚合棉花高光效分子标记辅助育种提供理论依据。     

海岛棉CSSLs分子评价及纤维品质、产量性状QTL定位

本课题组前期以陆地棉中棉所8号(CCRI8)为轮回亲本, 海岛棉Pima 90-53为供体亲本培育了一套陆地棉中棉所8号为背景的海岛棉染色体片段置换系(CSSLs), 本研究利用SSR标记对该置换系群体BC₃F₅进行基因型检测, 在3个不同环境下(河北保定、青县和新疆轮台)鉴定其纤维品质和产量相关性状并进行QTL定位。该置换系群体包含182个家系, 置换片段数在1~15个之间, 平均为6.6个; 导入片段长度在0.7~83.2 cM之间, 平均长度为16.8 cM; 置换片段总长度20 249.6 cM; 背景回复率在92.3%~99.6%之间, 平均为96.2%。共检测出59个相关的QTL, 其中与纤维品质性状相关的41个, 单个QTL的贡献率为1.27%~26.66%; 与产量性状相关的18个, 单个QTL的贡献率为2.03%~19.38%; 检测到14个稳定的QTL, 其中4个马克隆值和2个纤维伸长率相关的稳定QTL增效基因均来自高值亲本海岛棉Pima 90-53, 2个铃重相关的稳定QTL增效基因来自高值亲本陆地棉中棉所8号。研究结果为深入开展纤维品质和产量性状的QTL精细定位、QTL间互作和分子育种提供了理论依据。     

QTL mapping for six ear leaf architecture traits under water‐stressed and well‐watered conditions in maize (Zea mays L.)

Morphological traits for ear leaf are determinant traits influencing plant architecture and drought tolerance in maize. However, the genetic controls of ear leaf architecture traits remain poorly understood under drought stress. Here, we identified 100 quantitative trait loci (QTLs) for leaf angle, leaf orientation value, leaf length, leaf width, leaf size and leaf shape value of ear leaf across four populations under drought‐stressed and unstressed conditions, which explained 0.71%–20.62% of phenotypic variation in single watering condition. Forty‐five of the 100 QTLs were identified under water‐stressed conditions, and 29 stable QTLs (sQTLs) were identified under water‐stressed conditions, which could be useful for the genetic improvement of maize drought tolerance via QTL pyramiding. We further integrated 27 independent QTL studies in a meta‐analysis to identify 21 meta‐QTLs (mQTLs). Then, 24 candidate genes controlling leaf architecture traits coincided with 20 corresponding mQTLs. Thus, new/valuable information on quantitative traits has shed some light on the molecular mechanisms responsible for leaf architecture traits affected by watering conditions. Furthermore, alleles for leaf architecture traits provide useful targets for marker‐assisted selection to generate high‐yielding maize varieties.     

大豆叶片性状和叶绿素含量QTL间的上位性和环境互作效应

以丰产性好、抗旱力强的栽培大豆晋豆23为母本,山西农家品种半野生大豆灰布支黑豆为父本杂交衍生的447个RIL作为供试群体。将亲本及447个家系分别于2011、2012和2013年采用随机试验种植,按照标准测量叶长、叶宽和叶柄长3个性状,并于2012年8月1日和8月8日和2013年8月2日和8月9日各测量1次叶绿素含量。采用QTLNETwork 2.0混合线性模型分析方法和主基因+多基因混合遗传分离分析法,对大豆叶片性状和叶绿素含量进行遗传分析和QTL间的上位性和环境互作效应研究。结果表明,叶长受2对加性-加性×加性上位性混合主基因控制,叶宽受3对等效主基因控制,叶柄长受4对加性-加性×加性上位性主基因控制,叶绿素含量受4对加性主基因控制;检测到10个与叶长、叶宽、叶柄长和叶绿素含量相关的QTL,分别位于A1、A2、C2、H_1、L和O染色体。其中2个叶长QTL分别位于C2和L染色体,是2对加性×加性上位互作效应及环境互作效应QTL;3个叶宽加性与环境互作QTL分别位于A2、C2和O染色体;2个叶柄长QTL分别位于L和O染色体;3个叶绿素含量QTL分别位于A1、C2和H_1染色体。叶片性状和叶绿素含量的遗传机制较复杂,加性效应、加性×加性上位互作效应及环境互作效应是大豆叶片性状和叶绿素含量的重要遗传基础。建议大豆分子标记辅助育种中,一方面要考虑起主要作用的QTL,另一方面要注重上位性QTL的影响,这对于性状的遗传和稳定表达具有积极的意义。     

基于AFLP分子图谱的蝴蝶兰3个叶片性状QTL分析

本研究以一个蝴蝶兰杂交组合Phal.462×Phal.20后代为材料,测定其后代群体中88个单株的叶长、叶宽和株幅,并基于已构建的AFLP分子连锁图谱,应用区间作图法对调控这3个性状的基因进行了QTL分析。统计分析结果表明,3个性状在群体中呈连续分布,具有数量性状的典型特征,叶长与株幅之间存在极显著正相关。QTL分析结果表明,在父本中共检测到QTL60个,分布于8个连锁群上,包括控制叶长性状的QTL20个,控制叶宽性状19个,控制株幅性状21个;各QTL的LOD值在3.05～14.78之间,可解释44.1%～89.4%的表型变异。在母本中共检测到QTL28个,分布于五个连锁群上,包括控制叶长性状10个,控制叶宽性状8个,控制株幅性状10个;各QTL的LOD值在3.1~9.24之间,可解释57.7%~76.3%的表型变异。这是蝴蝶兰上首个QTL分析研究,可为今后蝴蝶兰的基因克隆与分子标记辅助育种等提供基础。     

QTL mapping for seedling traits associated with low‐nitrogen tolerance using a set of advanced backcross introgression lines of rice

Nitrogen (N) deficiency is a major yield‐limiting factor in rice production. The objective of this study was to identify putative QTLs for low‐N stress tolerance of rice, using an advanced backcross population derived from crosses between an indica cultivar ‘93‐11’ and a japonica cultivar ‘Nipponbare’ and genotyped at 250 marker loci. Plant height, maximum root length, root dry weight, shoot dry weight and plant dry weight under two N conditions and their relative traits were used to evaluate low‐N tolerance at the seedling stage. A total of 44 QTLs were identified on chromosomes 1, 2, 3, 4, 5, 6, 8 and 9. Eight intervals on five chromosomes were identified to harbour multiple QTLs, suggesting pleiotropism or multigenic effects according to the contributor of alleles. Some QTL clusters were found in the nearby regions of genes associated with N recycling in rice, indicating that the key N metabolism genes might have effects on the expression of QTLs. Several unique QTLs for relative traits were detected, which suggested the specific genetic basis of relative performance.