Durable multifunctional properties on acrylic fabric using nano TiO2 and polysiloxane

Producing fabric with multifunctional properties has been recently a center of research and utilizing nanoparticles is an efficient approach to gain this purpose. Here, nano TiO₂ photo catalyst and polysiloxane softener were utilized as stabilizer on the acrylic fabric to obtain soft handle, hydrophilic, and self-cleaning features on the fabric. The effect of various concentrations of nano TiO₂ and polysiloxane on the fabric handle, water droplet absorption time, and self-cleaning properties of the fabric has been mathematically modeled based on the response surface methodology (RSM). The optimized treatment conditions indicated that treated acrylic fabric with 2.19 % polysiloxane and 0.68 % nano TiO₂ produced the rigidity of 26.8 g.cm, water absorption time of 15.8 s and self-cleaning of ΔE _T *=18.1. Also increasing the concentration of polysiloxane enhanced both wettability and photoactive properties of nano TiO₂ treated acrylic fabrics. Further, the nano TiO₂/polysiloxane treated acrylic fabrics is significantly enable to absorb the light with wavelength lower than 400 nm and improve discoloration of C.I. Reactive Yellow 1.     

Simultaneous synthesis of nano ZnO and surface modification of polyester fabric

In this study, synthesis of zinc oxide nanoparticles was carried out along with the hydrolysis of polyester fabric using sodium hydroxide to increase the surface activity and enhance the nanoparticles adsorption. The polyester fabrics were treated with zinc acetate and sodium hydroxide at different bath conditions, ultrasound and stirrer, resulting in formation of ZnO nanospheres and ZnO nanorods. The presence of zinc oxide with different shapes on the surface of the polyester fabrics was confirmed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Also, the X-ray diffraction patterns established the composition of wurtzite structure of zinc oxide. The self-cleaning property of treated polyester fabrics was evaluated through discoloring dye stain under sunlight irradiation. The antibacterial activities of the samples against two common pathogenic bacteria including Escherichia coli and Staphylococcus aureus were also assessed. The results indicated that the photocatalytic and antibacterial activities of the ultrasound treated polyester fabrics were superior compared to the stirrer treated samples.     

Investigation on the effect of titanium dioxide nano particles on camouflage properties of cotton fabrics

Cotton fabrics were dyed with three commercial vat dyes in order to provide camouflage in Vis-NIR regions and imitate reflectance profile of greenish leaves. To investigate the effect of nano particles on camouflage properties of dyed fabric, nano particles of TiO₂ were applied on dyed fabrics using pad-dry-cure method. The nano TiO₂ padded dyed fabrics were investigated using scanning electron microscopy (SEM). Reflectance curves of coated dyed samples with different concentrations of nano TiO₂ were measured. Results showed that in both of the standard shades, nano TiO₂ increases the reflectance value in NIR region and with increasing the concentration of nano TiO₂, the reflectance curves of samples tend to show the maximum reflection of greenish leaves (deciduous leaves) in NIR region. Chromatic values (CIE1976 L*, a*, and b*) and color difference (according to CIECMC color difference ΔE*cmc (2:1)) of each of the coated samples were measured using the reflection spectrophotometer. By considering the influence of white color of nano TiO₂ on green shade of dyed cotton fabrics and increasing the color difference (between coated samples and the standard shades of the 1948 U.S army pattern) in visible range, optimum concentrations of nano TiO₂ for development of camouflage properties on cotton fabrics in both NIR and visible region were determined. These values for NATO and forest green shades were 0.75 % and 0.5 %, respectively. Fastness results showed that both of the samples have acceptable color fastness. The effect of washing and exposure to light on camouflage properties of coated dyed fabrics in visible (in term of chromatic values) and NIR region (in term of spectral reflectance) was investigated when those were coated in optimum concentrations of nano TiO₂. The results showed that the effect of after treatments (washing and exposure to light) on surface color spectral characteristics and camouflage properties was inconsiderable.     

Multifunctional modification of wool fabric using graphene/TiO<Subscript>2</Subscript> nanocomposite

In this study, a new finishing technique is introduced through treatment of wool fabric with graphene/TiO₂ nanocomposite. Graphene oxide/titanium dioxide nanocomposite first applied on the wool fabric by hydrolysis of titanium isopropoxide in graphene oxide suspension and then this coating chemically converted by sodium hydrosulfite to graphene/TiO₂ nanocomposite. The homogenous distribution of the graphene/TiO₂ nanocomposite on the fiber surface was confirmed by field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy (EDS) and X-ray mapping. X-ray diffraction patterns proved the presence of titanium dioxide nanoparticles with a crystal size of 127 Å on the treated wool fabric. Also, the defect analysis based on X-ray photoelectron spectroscopy (XPS) established the composition of the nanocomposite. Other characteristics of treated fabrics such as antibacterial activity, photo-catalytic self-cleaning, electrical resistivity, ultraviolet (UV) blocking activity and cytotoxicity were also assessed. The treated wool fabrics possess significant antibacterial activity and photo-catalytic self-cleaning property by degradation of methylene blue under sunlight irradiation. Moreover, this process has no negative effect on cytotoxicity of the treated fabric even reduces electrical resistivity and improves UV blocking activity.     

Preparation of electroconductive,magnetic, antibacterial,and ultraviolet-blocking cotton fabric using reduced graphene oxide nanosheets and magnetite nanoparticles

The main goal of present study was the fabrication of cotton fabric with special functions, including electrical conductivity, magnetic, antibacterial, and ultraviolet (UV) blocking. In this regard, the cotton fabric was primarily coated with graphene oxide and then reduction of graphene oxide and synthesis of magnetite nanoparticles accomplished in one step. The alkaline hydrolysis of magnetite precursors and reduction of graphene oxide was simultaneously performed using sodium hydroxide to produce reduced graphene oxide/Fe₃O₄ nanocomposite on the fabric surface. The prepared cotton fabrics were characterized with field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The treated fabrics with reduced graphene oxide/Fe₃O₄ nanocomposite displayed a low electrical resistivity i.e. 80 kΩ/sq. Furthermore, the coated fabrics showed reasonable magnetic properties due to the presence of magnetite nanoparticles on the surface of cotton fabrics. Moreover, this process imparted proper antibacterial properties and UV blocking activity to cotton samples.     

Multifunctional polyester fabric using a multicomponent treatment

In this study, multifunctional polyester fabrics with the features of self-cleaning, water and stain repellency, and thermal stability were prepared utilizing a multicomponent system. To this end, both unmodified and alkaline-hydrolyzed modified fabrics were treated with nano TiO₂/citric or maleic acid/sodium hypophosphite/polysiloxane and triethanolamine via a pad-dry-cure method. Surface morphology and color variation of the samples were studied utilizing field emission scanning electron microscopy (FESEM) and CIE-Lab system, respectively. Also, energy-dispersive X-ray (EDX) analysis indicated the content of Ti, P and Si on the surface of fabrics. Thermal stability of the specimen was scrutinized through thermal gravimetric analysis (TGA) and char yield. Both hydrolysis treatment and silicone softener increased the uptake of the nanoparticles. Also, in a comparison between the utilized carboxylic acids, citric acid demonstrated superior features. Generally, the treated fabrics showed desirable self-cleaning and stain repellency with some enhanced thermal stability.     

Nano-TiO<Subscript>2</Subscript> based multilayer film deposition on cotton fabrics for UV-protection

Nano-TiO₂ based multilayer nanocomposite films were fabricated on cationically modified woven cotton fabrics by layer-by-layer molecular self-assembly technique. Cationization process was used to obtain cationic surface charge on cotton fabrics. Attenuated total reflectance Fourier transform infrared spectroscopy analyses were used to verify the presence of cationic surface charge and multilayer films deposited on the fabrics. Scanning electron microscope micrographs of poly(sodium 4-styrene sulfonate)/TiO₂, nano polyurethane/TiO₂, and TiO₂/poly(diallyldimethylammonium chloride) multilayer films deposited on cotton fabrics were taken. With nano-TiO₂ based multilayer film deposition, the protection of cotton fabrics against UV radiation is enhanced. The UV protection durability of the self-assembled multilayer films deposited on the cotton fabrics was analyzed after 10 and 20 washing cycles at 40 °C for 30 min. Air permeability and whiteness value analysis were performed on the untreated and multilayer film deposited cotton fabrics. The effect of layer-by-layer deposition process on tensile strength properties of the warp and weft yarns was determined.     

In situ loading TiO<Subscript>2</Subscript> and its photocatalysis and UV resistance on cotton fabric

Anatase TiO₂ nanoparticles was in-situ formed on the cotton fabric by using tetrabutyl titanate (TBT) as a precursor through the normal pressure hydrothermal method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV visible spectra (UV-VIS), ATR-IR were used as the characterization techniques. Photocatalytic performance of TiO₂ on the fabric surface was evaluated by methylene blue (MB), 4 kinds of the common living stains and three dyes under ultraviolet and visible light radiation. XRD analysis found that the TiO₂ loaded on the fabric was mainly anatase crystalline phase with particle size of 6.4 nm. SEM observed that a large number of nano TiO₂ particles are distributed on the fabric surface. UV-VIS test indicated that theTiO₂-coated fabric possessed an obvious absorption for ultraviolet. ATR-IR analysis indicated that the nano-TiO₂ possesses a strong affinity with the hydroxyl group of the cotton fabric, and the soaping tests showed that the TiO₂ was firmly bonded with the fabrics. The treated fabrics have good degradation ability for MB aqueous solution, and could degrade azo, anthraquinone and phthalocyanine dyes. The order of degradation of the common life stains was: pepper oil> tea > coffee > soy sauce.     

Antimicrobial,UV-protective and self-cleaning properties of cotton fabrics coated by dip-coating and solvothermal coating methods

Multifunctional textiles have been widely investigated with antimicrobial, self-cleaning, UV-protective properties, etc. Especially sol-gel coating doped with bioactive agents and special agents provides to produce multifunctional textiles. In this study, dip-coating (pad-dry) and solvothermal (exhaustion) sol-gel processes were used for coating of cotton fabric with silica and titania sols to achieve the properties mentioned above. A quaternary ammonium salt and silver salts as antimicrobial doping agent were embedded in titania sols with or without silica. Antimicrobial properties against Staphylococcus aureus (S. aureus) of the coated fabrics were characterized. The effect of precursors, doping agents and different sol-gel processes were also compared on performance properties of the fabric samples.     

Synthesis of ZnO nanoparticles by PNP and its application on the functional finishing of cotton fabrics

This paper presents a facile and novel approach for the synthesis of ZnO nanoparticles in aqueous solution based on a one-step reaction between a modified hyperbranched polymer (PNP) and zinc nitrate. The prepared ZnO nanoparticles polymeric hybrid was characterized and its antibacterial activity was investigated. The results indicated that the ZnO nanoparticles have an average size about 6 nm and well dispersed in aqueous medium. The minimum inhibitory concentration (MIC) of them was 20 ppm and 60 ppm against S. aureus and E. coli, respectively. For the functional finishing of cotton fabrics by these ZnO nanoparticles, a microwave assisted in situ fabrication method was employed. Scanning electron microscope (SEM), energy dispersive X-ray (EDX) spectroscopy and X-ray diffraction (XRD) measurements confirmed that the ZnO nanoparticles in situ generated in cotton fabrics successfully. Fourier transform infrared (FT-IR) spectroscopic investigation demonstrated that the ZnO nanoparticles were fixed on the cotton fibers by PNP. The treated cotton fabrics exhibited excellent UV protective properties and antibacterial activities. When ZnO content of cotton fabric was 1.49 %, the UPF value of treated cotton fabric exceeded 125 and the bacterial reduction rate against S. aureus and E. coli reached 99.97 % and 98.40 %, respectively.     

Effect of Silver Particle size on color and Antibacterial properties of silk and cotton Fabrics

In this study silver nanoparticles with different particle sizes and hence colors were synthesized on silk and cotton fabrics through reduction of silver nitrate. Particle sizes of the silver colloids were measured by dynamic light scattering (DLS). The structure and properties of the treated fabrics were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV-Vis reflectance spectroscopy. Various characteristics of the treated fabrics including antibacterial activities against a Gram positive (Staphylococcus aureus) and a Gram negative (Escherichia coli) bacteria, color effect, wash and light fastness, water absorption, fabric rigidity, and UV blocking properties were also assessed. The results indicated that the treated fabrics displayed different colors in the presence of silver nanoparticles with different particle sizes and exhibited good and durable fastness properties. Also, the size of the silver particles had a tangible effect on antibacterial activity of treated fabrics and its antibacterial performance was improved by decreasing the size of particles. Moreover, this process imparted significantly UV blocking activity to fabric samples.     

Application of silver nanoparticles to cotton fabric as an antibacterial textile finish

A novel nano-silver colloidal solution was prepared in one step by mixing AgNO₃ aqueous solution and an amino-terminated hyperbranched polymer (HBP-NH₂) aqueous solution under vigorous stirring at room temperature. All results of Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM) and UV/Visible Absorption Spectrophotometry indicated that silver nanoparticles had been formed in colloidal solution. Cotton fabric was treated with nano-silver colloid by an impregnation method to provide the cotton fabric with antibacterial properties. The whiteness, silver content, antibacterial activity and washing durability of the silver-treated fabrics were determined. The results indicated that the silver-treated cotton fabric showed 99.01 % bacterial reduction of Staphylococcus aureus and 99.26 % bacterial reduction of Escherichia coli while the silver content on cotton was about 88 mg/kg. The antimicrobial activity of the silver-treated cotton fabric was maintained at over 98.77 % reduction level even after being exposed to 20 consecutive home laundering conditions. In addition, the results of scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) confirmed that silver nanoparticles have been fixed and well dispersed on cotton fabrics’ surface and the major state of the silver presented on the surface was Ag⁰.     

Preparation of Durable Antibacterial Cellulose with AgCl Nanoparticles

In this study, a facile method was developed to coat AgCl nanoparticles (NPs) onto knitted cotton fabrics. The AgCl NPs were characterized by ultraviolet absorption spectrum, X-ray diffraction (XRD) and dynamic laser light scattering (DLS). The AgCl NPs were coated onto cotton fabrics through a pad-dry-cure process with the assistance of 1,2,3,4- butanetetracarboxylic acid (BTCA). Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), ICP-OES analysis and energy-dispersive X-ray spectroscopy (EDX) confirmed that AgCl NPs were successfully coated onto cotton fabrics. The prepared cotton samples exhibited excellent antimicrobial activity against both Gram-positive S. aureus and Gram-negative K. pneumonia bacteria. Rat skin fibroblast cytotoxicity testing demonstrated the treated cotton fabrics to be non-toxic. The washing durability evaluation showed that the antimicrobial function of cotton fabrics was durable to washing. In addition, the wrinkle resistance of the coated cotton fabrics was improved and there was no obvious change in whiteness.     

Synthesis of a dodecylphenylsiloxane oligomer resin/silica nanocomposite and its application to cotton fabrics

A novel dodecylphenylsiloxane oligomer resin/nanocomposite (PHDESR-SiO₂) was prepared by graft copolymerization between dodecyl modified phenylsiloxane resin with pendent epoxy groups (PHDESR) and amino-functionalized silica nanoparticles (BTEPA-SiO₂). PHDESR-SiO₂ was then used to prepare a super hydrophobic surface on cotton fabric by a facile solution-immersion process method. Chemical structures, chemical compositions, wettability, surface morphology, and thermal properties were investigated by Fourier Transform Infrared Spectrum (FT-IR), ¹H-NMR spectrum, X-ray photoelectron spectroscopy (XPS), static contact angle analyzer, scanning electron microscopy (SEM), Particle size distribution (PSD) and thermo-gravimetric analysis (TGA). The results showed that the target product PHDESR-SiO₂ has an anticipative structure with many micro/nanostructure tubercles, a cross-linked network hydrophobic organosilicon resin film and many clusters of cylindrical dodecyl molecular brushes. This created super hydrophobic structure on the surface of the treated cotton fabrics. XPS analysis indicated that the long carbon chain groups had a slight tendency to enrich the film-air interface. In addition, PHDESR-SiO₂ can provide good hydrophobicity for the treated fabric. As the dose of PHDESR-SiO₂ increased, the hydrophobicity of the treated fabric enhanced and consequently the water static contact angle reached 152.5 °. This had little influence on the softness, color, and gas permeability of the fabrics. This makes it slightly stiff at high doses, and the super-hydrophobic cotton fabric also had good launderability.     

Synthesis of silver nanoparticles with sericin and functional finishing to cotton fabrics

This research presents a novel strategy to fabricate multi-functional cotton textiles. In this study, silver nanoparticles-sericin (Ag NPS-sericin) hybrid colloid has been prepared using sericin as reducing agent and dispersing agent. Cotton fabrics was oxidized selectively with sodium periodate (NaIO₄) to generate oxidized cotton fabrics, and which has then been finished using Ag NPS-sericin hybrid colloid prepared to obtain multi-functional cotton textiles. The finished cotton fabric not only possessed excellent antibacterial activity, but also it was modified functionally by sericin protein, which endowed antibacterial cotton fabrics relatively smooth surface and good wear ability. Fourier transform infrared spectrogram confirmed that sericin protein was grafted onto cellulose fibers. Ag NPs were characterized by UV-Vis spectroscopy, transmission electron microscope (TEM) and X-ray powder diffraction (XRD). The results of SEM, X-ray photoelectron spectroscopy (XPS) and EDS confirmed that silver nanoparticles and sericin been loaded successfully on the surface of cotton fabrics. The antibacterial experiments showed bacterial reduction rates of S.aureus and E.coli were able to reach above 99 %. After washing 20 times, it showed still good antibacterial activity at over 95 % against S.aureus and E.coli.     

Immobilization of TiO2 nanoparticles on PET fabric modified with silane coupling agent by low temperature hydrothermal method

PET fabric was first modified with silane coupling agent KH-560, and then was loaded with a layer of nano-scaled TiO₂ particles using tetrabutyl titanate as precursor by low temperature hydrothermal method, followed by dyeing with Disperse Blue 56. The morphology, crystalline phase, chemical modification, thermal stability and optical property of PET fiber before and after treatments were studied by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, thermal gravimetric and diffuse reflectance spectrum techniques. The properties of tensile, air permeability, luster, ultraviolet (UV) protection, photocatalytic activity, K/S value and color fastness were also measured. It was found that compared with the TiO₂-coated fabric without modification with KH-560, the loading of TiO₂ nanoparticles on the surface of the TiO₂-coated fabric modified with KH-560 was obviously improved. The pure anatase TiO₂ nanoparticle was grafted onto the fiber surface. The onset decomposition temperature increased. The absorbing capability to ultraviolet radiation was enhanced. The properties of tensile, air permeability, luster, K/S value and color fastness changed slightly. The UV protection ability and photodegradation of methyl orange under UV illumination were enhanced to some extent.     

Self-cleaning and handle properties of TiO2-modified textiles

Self-cleaning surfaces based on photocatalysis are an extremely promising nano-technological field of extensive research and development. Recently comprehensive research work has been performed to evaluate the optical, photocatalytic and antimicrobial properties of TiO₂ nano-particles and composites thereof. The aim of this study was to obtain self-cleaning properties for regenerate cellulose surfaces by nano-modification, using TiO₂ nano-coating and to define the impact of the modification on fabrics end-use properties. Two different modified fabrics with self-cleaning effect were prepared and analysed, i.e. the modification efficiency was determined. In addition, the influence of fibre modification on several textile properties was determined. However, a soft handle, good appearance and some other surface properties accompanied by appropriate mechanical properties represent the basis for a high quality fabric therefore the influence of the modification procedure on textiles handle was studied.     

Eco-dyeing and antimicrobial properties of chlorophyllin copper complex extracted from Sasa veitchii

Cotton fabrics were dyed with the natural chlorophyll derivates (chlorophyllin, Chlin) after treatment with and without chitosan. The water-soluble Chlin extracted from Sasa veitchii based on Japanese bamboo leaves were investigated in order to improve the textile coloration and antimicrobial activity. The antimicrobial activity of the dyed fabrics that had been pretreated with chitosan as a biomordant over a concentration range of 0∼0.7 % was tested against two common gram pathogens: Staphylococcus aureus and Klebsiella pneumoniae. The color depth as measured by the K/S value, the color difference and the colorfastness to washing and light were also evaluated. The fabrics treated with chitosan resulted in an increase in dye uptake in all cases compared with the corresponding untreated fabrics, and did not affect fastness of washing and light. The cotton fabrics dyed with mordant and CuSO₄ extracts appeared to have over 99.9 % of antimicrobial activity, while MeOH extracts showed 71.8 %.     

A Novel Green Stabilization of TiO<Subscript>2</Subscript> Nanoparticles onto Cotton

Facile embedding of TiO₂ nanoparticles onto cotton fabric has been successfully attained by ultraviolet light irradiations. The adhesion of nanoparticles with fibre surface, tensile behaviour and physicochemical changes before and after ultraviolet treatment were investigated by scanning electron microscopy, energy dispersive X-ray and inductive couple plasma-atomic emission spectroscopy. Experimental variables i.e. dosage of TiO₂ nanoparticles, temperature of the system and time of ultraviolet irradiations were optimised by central composite design and response surface methodology. Moreover, two different mathematical models were developed for incorporated TiO₂ onto cotton and tensile strength of cotton after ultraviolet treatment and used further to testify the obtained results. Self-clean fabric through a synergistic combination of cotton with highly photo active TiO₂ nanoparticles was produced. Stability against ultraviolet irradiations and self-cleaning properties of the produced fabric were evaluated.     

Superhydrophobicity,Self-cleaning and Flame Retardancy Properties of Cotton Fabric

A simple and facile method for fabricating the cotton fabric with superhydrophobicity, self-cleaning and flame retardancy was described in the present work. Three types of antimony pentoxide sol (Sb₂O₅), aluminum hydroxide sol (Al(OH)₃) and 1H,1H,2H,2H-perfluorodecyltriethoxysilane (fluoroalkyl silanes) were used as coating for the cotton fabric. It was found that Sb₂O₅ and Al(OH)₃ exhibited significant synergistic effects on the flame retardancy. When the weight ratio of Sb₂O₅/Al(OH)₃(content 30 wt%) was 1:3, the results showed that the limiting oxygen index (LOI) value was 45.1 %, smoke density (SDR) value was 35 %, and it still passed UL94 V-0 rating. The cotton fabrics coated with fluoroalkyl silanes/Sb₂O₅/ Al(OH)₃ showed a superhydrophobicity, anti-contamination and self-cleaning properties. In addition, the results exhibited the outstanding superhydrophobicity, oil/water separation, excellent waterproofing durability and flame retardancy of cotton fabric after 1000 cycles of washing by water, the LOI value was 40.1 %, SDR value was 39 % and WCA was 152° after 1000 cycles of washing. We believe that this simple, environmentally friendly and versatile fabrication of the cotton fabric had excellent real-life applications.