Adapting PILOTE model for water and yield management under direct seeding system: The case of corn and durum wheat in a Mediterranean context

Crop models are useful tools for integrating knowledge of biophysical processes governing the plant-soil-atmosphere system. But few of them are easily usable for water and yield management especially under specific cropping systems such as direct seeding. Direct seeding into mulch (DSM) is an alternative for conventional tillage (CT). DSM modifies soil properties and creates a different microclimate from CT. So that, we should consequently consider these new conditions to develop or to adapt models. The aim of this study was to calibrate and validate the PILOTE [Mailhol, J.C., Olufayo, A.A., Ruelle, P., 1997. Sorghum and sunflower evapotranspiration and yield from simulated leaf area index. Agric. Water Manag. 35, 167-182; Mailhol, J.C., Zaïri A., Slatni A., Ben Nouma, B., El Amami, H., 2004. Analysis of irrigation systems and irrigation strategies for durum wheat in Tunisia. Agric. Water Manag. 70, 19-37], an operative crop model based on the leaf area index (LAI) simulation, for corn and durum wheat in both DSM and CT systems in Mediterranean climate. In DSM case, simple model modifications were proposed. This modified PILOTE version accounts for mulch and its impact on soil evaporation. In addition root progression was modified to account for lower soil temperatures in DSM for winter crops. PILOTE was calibrated and validated against field data collected from a 7-year trial at the experimental station of Lavalette (SE of France). Results indicated that PILOTE satisfactorily simulates LAI, soil water reserve (SWR), grain yield, and dry matter yield in both systems. The minimum coefficient of efficiency for SWR was 0.90. This new version of PILOTE can thus be used to manage water and yield under CT and DSM systems in Mediterranean climate.     

Analysis of AET and yield predictions under surface and buried drip irrigation systems using the Crop Model PILOTE and Hydrus-2D

Innovative irrigation solutions have to face water scarcity problems affecting the Mediterranean countries. Generally, surface (DI) or subsurface drip irrigation systems (SDI) have the ability to increase water productivity (WP). But the question about their possible utilisation for crops such as corn would merit to be analysed using an appropriate economic tool. The latter would be necessary based on the utilisation of a modelling approach to identify the optimal irrigation strategy associating a water amount with a crop yield (Yc). In this perspective, a possible utilisation of the operative 1D crop model PILOTE for simulating actual evapotranspiration (AET) and yield under a 2D soil water transfer process characterizing DI and SDI was analysed. In this study, limited to a loamy soil cultivated with corn, the pertinence of the root water uptake model used in the numerical code Hydrus-2D for AET estimations of actual evapotranspiration (AET) under water stress conditions is discussed throughout the Yc = F(AET) relationship established by PILOTE on the basis of validated simulations. The conclusions of this work are (i): with slight adaptations, PILOTE can provide reliable WP estimations associated to irrigation strategies under DI and SDI, (ii): the current Hydrus-2D version used in this study underestimates AET, compared with PILOTE, in a range varying from 7% under moderate water stress conditions to 14% under severe ones, (iii): A lateral spacing of 1.6 m for the irrigation of corn with a SDI system is an appropriate solution on a loamy soil under a Mediterranean climate.A local Yc = F(AET) relationship associated with a Hydrus-2D version taking into account the compensating root uptake process could result in an interesting tool to help identify the optimal irrigation system design under different soil conditions.     

Effect of irrigation amounts applied with subsurface drip irrigation on corn evapotranspiration, yield, water use efficiency, and dry matter production in a semiarid climate

Quantifying the local crop response to irrigation is important for establishing adequate irrigation management strategies. This study evaluated the effect of irrigation applied with subsurface drip irrigation on field corn (Zea mays L.) evapotranspiration (ETc), yield, water use efficiencies (WUE = yield/ETc, and IWUE = yield/irrigation), and dry matter production in the semiarid climate of west central Nebraska. Eight treatments were imposed with irrigation amounts ranging from 53 to 356 mm in 2005 and from 22 to 226 mm in 2006. A soil water balance approach (based on FAO-56) was used to estimate daily soil water and ETc. Treatments resulted in seasonal ETc of 580–663 mm and 466–656 mm in 2005 and 2006, respectively. Yields among treatments differed by as much as 22% in 2005 and 52% in 2006. In both seasons, irrigation significantly affected yields, which increased with irrigation up to a point where irrigation became excessive. Distinct relationships were obtained each season. Yields increased linearly with seasonal ETc (R² = 0.89) and ETc/ETp (R² = 0.87) (ETp = ETc with no water stress). The yield response factor (ky), which indicates the relative reduction in yield to relative reduction in ETc, averaged 1.58 over the two seasons. WUE increased non-linearly with seasonal ETc and with yield. WUE was more sensitive to irrigation during the drier 2006 season, compared with 2005. Both seasons, IWUE decreased sharply with irrigation. Irrigation significantly affected dry matter production and partitioning into the different plant components (grain, cob, and stover). On average, the grain accounted for the majority of the above-ground plant dry mass (≈59%), followed by the stover (≈33%) and the cob (≈8%). The dry mass of the plant and that of each plant component tended to increase with seasonal ETc. The good relationships obtained in the study between crop performance indicators and seasonal ETc demonstrate that accurate estimates of ETc on a daily and seasonal basis can be valuable for making tactical in-season irrigation management decisions and for strategic irrigation planning and management.     

Simulation of furrow irrigation practices (SOFIP): a field-scale modelling of water management and crop yield for furrow irrigation

Because of the spatial and temporal variabilities of the advance infiltration process, furrow irrigation investigations should not be limited to a single furrow irrigation event when using a modelling approach. The paper deals with the development and application of simulation of furrow irrigation practices (SOFIP), a model used to analyse furrow irrigation practices that take into account spatial and temporal variabilities of the advance infiltration process. SOFIP can be used to compare alternative furrow irrigation management strategies and find options that mitigate local deep-percolation risks while ensuring a crop yield level that is acceptable to the farmer. The model is comprised of three distinct modelling elements. The first element is RAIEOPT, a hydraulic model that predicts the advance infiltration process. Infiltration prediction in RAIEOPT depends on a soil moisture deficit parameter. PILOTE, a crop model, which is designed to simulate soil water balance and predict yield values, updates the soil moisture parameter. This parameter is an input of a parameter generator (PG), the third model component, which in turn provides RAIEOPT with the data required to simulate irrigation at the scale of an N-furrow set. The study of sources of variability and their impact on irrigation advance, based on field observations, allowed us to build a robust PG. Model applications show that irrigation practices must account for inter-furrow advance variability when optimising furrow irrigation systems. The impact of advance variability on deep percolation and crop yield losses depends on both climatic conditions and irrigation practices.     

Evaluation of crop water stress index for LEPA irrigated corn

This study was designed to evaluate the crop water stress index (CWSI) for low-energy precision application (LEPA) irrigated corn (Zea mays L.) grown on slowly-permeable Pullman clay loam soil (fine, mixed, Torrertic Paleustoll) during the 1992 growing season at Bushland, Tex. The effects of six different irrigation levels (100%, 80%, 60%, 40%, 20%, and 0% replenishment of soil water depleted from the 1.5-m soil profile depth) on corn yields and the resulting CWSI were investigated. Irrigations were applied in 25 mm increments to maintain the soil water in the 100% treatment within 60–80% of the “plant extractable soil water” using LEPA technology, which wets alternate furrows only. The 1992 growing season was slightly wetter than normal. Thus, irrigation water use was less than normal, but the corn dry matter and grain yield were still significantly increased by irrigation. The yield, water use, and water use efficiency of fully irrigated corn were 1.246 kg/m², 786 mm, and 1.34 kg/m³, respectively. CWSI was calculated from measurements of infrared canopy temperatures, ambient air temperatures, and vapor pressure deficit values for the six irrigation levels. A “non-water-stressed baseline” equation for corn was developed using the diurnal infrared canopy temperature measurements as T _c–T _a = 1.06–2.56 VPD, where T _c was the canopy temperature (°C), Ta was the air temperature (°C) and VPD was the vapor pressure deficit (kPa). Trends in CWSI values were consistent with the soil water contents induced by the deficit irrigations. Both the dry matter and grain yields decreased with increased soil water deficit. Minimal yield reductions were observed at a threshold CWSI value of 0.33 or less for corn. The CWSI was useful for evaluating crop water stress in corn and should be a valuable tool to assist irrigation decision making together with soil water measurements and/or evapotranspiration models. Received: 19 May 1998     

Overland water and salt flows in a set of rice paddies

Cultivation of paddy rice in semiarid areas of the world faces problems related to water scarcity. This paper aims at characterizing water use in a set of paddies located in the central Ebro basin of Spain using experimentation and computer simulation. A commercial field with six interconnected paddies, with a total area of 5.31 ha, was instrumented to measure discharge and water quality at the inflow and at the runoff outlet. The soil was classified as a Typic Calcixerept, and was characterized by a mild salinity (2.5 dS m⁻¹) and an infiltration rate of 5.8 mm day⁻¹. The evolution of flow depth at all paddies was recorded. Data from the 2002 rice-growing season was elaborated using a mass balance approach to estimate the infiltration rate and the evolution of discharge between paddies. Seasonal crop evapotranspiration, estimated with the surface renewal method, was 731 mm (5.1 mm day⁻¹), very similar to that of other summer cereals grown in the area, like corn. The irrigation input was 1874 mm, deep percolation was 830 mm and surface runoff was 372 mm. Irrigation efficiency was estimated as 41%. The quality of surface runoff water was slightly degraded due to evapoconcentration and to the contact with the soil. During the period 2001–2003, the electrical conductivity of surface runoff water was 54% higher than that of irrigation water. However, the runoff water was suitable for irrigation. A mechanistic mass balance model of inter-paddy water flow permitted to conclude that improvements in irrigation efficiency cannot be easily obtained in the experimental conditions. Since deep percolation losses more than double surface runoff losses, a reduction in irrigation discharge would not have much room for efficiency improvement. Simulations also showed that rice irrigation performance was not negatively affected by the fluctuating inflow hydrograph. These hydrographs are typical of turnouts located at the tail end of tertiary irrigation ditches. In fact, these are the sites where rice has been historically cultivated in the study area, since local soils are often saline-sodic and can only grow paddy rice taking advantage of the low salinity of the irrigation water. The low infiltration rate characteristic of these saline-sodic soils (an experimental value of 3.2 mm day⁻¹ was obtained) combined with a reduced irrigation discharge resulted in a simulated irrigation efficiency of 60%. Paddy rice irrigation efficiency can attain reasonable values in the local saline-sodic soils, where the infiltration rate is clearly smaller than the average daily rice evapotranspiration.     

Water use, crop coefficients, and irrigation management criteria for camelina production in arid regions

Camelina sativa (L.) Crantz is an oilseed crop touted as being suitable for production in the arid southwestern USA. However, because any significant development of the crop has been limited to cooler, rain-fed climate-areas, information and guidance for managing irrigated-camelina are lacking. This study measured the crop water use of a November-through-April camelina crop in Arizona using frequent measurements of soil water contents. The crop was grown under surface irrigation using five treatment levels of soil water depletion. The seed yields of treatments averaged 1,142 kg ha⁻¹ (8.0% seed moisture) and were generally comparable with camelina yields reported in other parts of the USA. Varying total irrigation water amounts to treatments (295–330 mm) did not significantly affect yield, whereas total crop evapotranspiration (ET_c) was increased for the most frequently irrigated treatment. However, total ET_c for the camelina treatments (332–371 mm) was markedly less than that typically needed by grain and vegetable crops (600–655 mm), which are commonly grown during the same timeframe in Arizona. The camelina water-use data were used to develop crop coefficients based on days past planting, growing degree days, and canopy spectral reflectance. The crop coefficient curves, along with information presented on camelina soil water depletion and root zone water extraction characteristics will provide camelina growers in arid regions with practical tools for managing irrigations.     

Field water supply:yield relationships of grain sorghum grown in three USA Southern Great Plains soils

Field water supply (FWS) combines the three sources of water used by a crop for evapotranspiration (ET), and consists of available soil water at planting (ASWP), rainfall, and irrigation. Examining the grain yield and FWS relationship (Y_g:FWS) may provide insight into the reported variability in crop water production functions such as water productivity (WP) and irrigation water productivity (IWP). Since water is most productive when entirely consumed in ET, diversion of FWS into non-ET losses such as drainage and excessive soil water evaporation results in declines in WP and IWP. The objective of this experiment was to examine the Y_g:FWS and Y_g:ET relationships of grain sorghum grown under a range of irrigation treatments (0, 25, 50, and 100% replacement of ET), beginning soil water contents, evaporative demands, in the Amarillo, Pullman, and Ulysses soils of the Great Plains. The purpose was to determine the amount of FWS beyond which declines in WP and IWP began to occur due to non-ET losses as indicated by a change in the slope and intercept of the Y_g:FWS and Y_g:ET relationships. Large amounts of non-ET irrigation application losses occurred in the finer-textured soils in the T-100 irrigation treatment. In both years, the T-100 irrigation application amounts and ASWP resulted in a FWS ranging from 750 to 870 mm which exceeded the maximum ET requirement of 530-630 mm and which reduced WP and IWP. Piecewise regression analysis of the Y_g:FWS and Y_g:ET relationships for the crops in the Pullman and Ulysses soils identified the knot point, or change in slope and intercept, in the FWS where both WP and IWP tended to be optimized. This was about 500 mm in both soils, and involved the utilization of about 250 mm in ASWP, irrigation applications averaging about 250 mm, and about 60-130 mm remaining in the soil at harvest. For the coarser-textured Amarillo soil, the yield response to increasing FWS was linear, because non-ET application losses such as drainage gradually increased with the irrigation application amount. The linear Y_g response in the sandy Amarillo soil and the piecewise Y_g responses in the clay and silt loams of the Pullman and Ulysses soils to FWS also reflected the difference in water-holding capacities of the soils that affected the amount of available water as irrigation increased. Irrigating without considering FWS resulted in non-ET irrigation application losses and declines in WP and IWP.     

Estimation irrigation water requirements with derived crop coefficients for upland and paddy crops in ChiaNan Irrigation Association,Taiwan

Field experiments were performed at the HsuehChia Experimental Station from 1993 to 2001 to calculate the reference and actual crop evapotranspiration, derived the crop coefficient, and collected requirements input data for the CROPWAT irrigation management model to estimate the irrigation water requirements of paddy and upland crops at the ChiaNan Irrigation Association, Taiwan. For corn, the estimated crop coefficients were 0.40, 0.78, 0.89 and 0.71 in the initial, crop development, mid-season and late-season stages, respectively. Meanwhile, the estimated crop coefficients for sorghum were 0.44, 0.71, 0.87 and 0.62 in the four stages, respectively. Finally, for soybean, the estimated crop coefficients were 0.45, 0.89, 0.92 and 0.58 in the four stages, respectively. With implementation of REF-ET model and FAO 56 Penman–Monteith method, the annual reference evapotranspiration was 1268 mm for ChiaNan Irrigation Association.In the paddy fields, the irrigation water requirements and deep percolation are 962 and 295 mm, respectively, for the first rice crop, and 1114 and 296 mm for the second rice crop. Regarding the upland crops, the irrigation water requirements for spring and autumn corn are 358 and 273 mm, respectively, compared to 332 and 366 mm for sorghum, and 350 and 264 mm for soybean. For the irrigated scheme with single and double rice cropping patterns in the ChiaNan Irrigation Association, the CROPWAT model simulated results indicate that the annual crop water demands are 507 and 1019 mm, respectively, and the monthly water requirements peaked in October at 126 mm and in January at 192 mm, respectively.     

Elevation and infiltration in a level basin. I. Characterizing variability

Spatial characterization of soil physical properties could improve the estimation of surface irrigation performance. The aim of this research was to characterize the spatial and time variability of a set of irrigation-related soil properties. The small-scale experimental level-basin (729 m²) was located on an alluvial loam soil. A corn crop was established in the basin and irrigated five times during the season. A detailed survey of the soil properties (generally using a 3 × 3 m network) was performed. Classic statistical and geostatistical tools were used to characterize the variables and their interactions. Semivariograms were validated for the studied variables, except for the clay fraction, the saturated hydraulic conductivity and the infiltration parameters. The resulting geostatistical range was often in the interval of 6–10 m. For the three surveys of soil surface elevation the range was smaller, about 4 m. No correlation was found between saturated hydraulic conductivity and the other soil physical properties. Soil surface elevation showed a high correlation between surveys. After the first irrigation, the standard deviation of elevation increased from an initial 9.6 mm to 20.8 mm. The soil physical parameters were used to map the soil water management allowable depletion. In a companion paper these results are used to explain the spatial variability of corn yield and soil water recharge due to irrigation. Received: 24 February 1998     

Irrigation management in arid areas affected by surface crust

The effects of supplemental irrigation and irrigation practices on soil water storage and barley crop yield were studied for a crust-forming soil at the University of Jordan Research Station near Al-Muwaqqar village during the 1996/97 growing season. An amount of 0.0, 48.9, 73.3, 122.2 and 167 mm supplemental irrigation water were applied. The 48.9, 73.3 and 122.2 mm applications were applied through surface irrigation into furrows with blocked ends, and the 0.0 and 167 mm applications via sprinkler irrigation. The greatest water infiltration and subsequent soil storage was achieved with the 122.2 mm application followed by the 73.3 mm irrigation, both surface applied. Application efficiency (the fraction of applied water that infiltrated into the soil and stored in the 600 mm soil profile) and soil water storage associated with supplemental blocked furrow irrigation was significantly greater than with supplemental sprinkler irrigation. For arid zone soil, which has little or no structural stability, application of supplemental irrigation water via short, blocked-end furrows prevents runoff and increases the opportunity time for infiltration, thereby increasing the amount of applied water that is infiltrated into the soil and stored in the soil profile. Supplemental irrigation, applied by a low-rate sprinkler system, was not as effective because of the low infiltration rates that resulted from the development of a surface throttle due to dispersion of soil aggregates at the soil surface. The differences in stored water had a significant effect on grain and straw yields of barley. Without supplemental irrigation, barley grain and straw yields were zero in natural rainfall cultivation with a total rainfall of 136.5 mm. Barley yields in the control treatment, with a 167 mm supplemental sprinkler irrigation were low being 0.19 and 1.09 ton/ha of barley grain and straw, respectively. Supplemental irrigation through blocked-end furrows increased barley grain and straw yields significantly compared with supplemental sprinkler irrigation to a maximum of 0.59 and 1.8 ton/ha, respectively. The improvement coming from the increased water storage associated with furrows. Since irrigation water is very limited if available, farmers are encouraged to form such furrows for reducing runoff from rainfall thereby increasing the amount of water available for forage and field crop production.     

Evaluation on the irrigation and fertilization management practices under the application of treated sewage water in Beijing, China

Irrigation and fertilization management practices play important roles in crop production. In this paper, the Root Zone Water Quality Model (RZWQM) was used to evaluate the irrigation and fertilization management practices for a winter wheat–summer corn double cropping system in Beijing, China under the irrigation with treated sewage water (TSW). A carefully designed experiment was carried out at an experimental station in Beijing area from 2001 to 2003 with four irrigation treatments. The hydrologic, nitrogen and crop growth components of RZWQM were calibrated by using the dataset of one treatment. The datasets of other three treatments were used to validate the model performance. Most predicted soil water contents were within ±1 standard deviation (S.D.) of the measured data. The relative errors (RE) of grain yield predictions were within the range of −26.8% to 18.5%, whereas the REs of biomass predictions were between −38% and 14%. The grain nitrogen (N) uptake and biomass N uptake were predicted with the RE values ranging from −13.9% to 14.7%, and from −11.1% to 29.8%, respectively. These results showed that the model was able to simulate the double cropping system variables under different irrigation and fertilization conditions with reasonable accuracy. Application of RZWQM in the growing season of 2001–2002 indicated that the best irrigation management practice was no irrigation for summer corn, three 83 mm irrigations each for pre-sowing, jointing and heading stages of winter wheat, respectively. And the best nitrogen application management practice was 120 kg N ha⁻¹ for summer corn and 110 kg N ha⁻¹ for winter wheat, respectively, under the irrigation with TSW. We also obtained the alternative irrigation management practices for the hydrologic years of 75%, 50% and 25%, respectively, in Beijing area under the conditions of irrigation with TSW and the optimal nitrogen application.     

Water productivity in rainfed systems: overview of challenges and analysis of opportunities in water scarcity prone savannahs

Addressing the Millennium Development Goals on food and poverty over the coming decade puts enormous pressure on the world’s finite freshwater resources. Without water productivity (WP) gains, the additional freshwater in agriculture will amount to 5,600 km³ year⁻¹ in 2050. This is three times the current global irrigation use. This paper focuses on the underlying processes and future opportunities of WP gains in water scarcity prone and poverty stricken savannah regions of the world. The paper studies the consumptive (green) WP dynamics rainfed farming systems, and shows that the often assumed linear relationship between evapotranspiration (ET) and yield (Y) does not translate into constant WP over a wide range of yields. Similarly, crop transpiration (T) and Y show non-linearity under on-farm and low yield conditions. This non-linearity is validated against several on-farm research experiments in semi-arid rainfed farming systems. With integrated soil and water management, focusing on dry spell mitigation and soil fertility can potentially more than double on-farm yields, while simultaneously improve green (ET) WP and productive green (T) WP. Through the adoption of appropriate soil and water management in semi-arid smallholder farming systems, crop yields improve and result in improved livelihoods and WP gains.     

Modeling irrigated cotton with shallow groundwater in the Aral Sea Basin of Uzbekistan: I. Water dynamics

In Khorezm, a region located in the Aral Sea basin of Uzbekistan, water use for irrigation of predominantly cotton is high whereas water use efficiency is low. To quantify the seasonal water and salt balance, water application, crop growth, soil water, and groundwater dynamics were studied on a sandy, sandy loam and loamy cotton field in the years 2003 and 2005. To simulate and quantify improved management strategies and update irrigation standards, the soil water model Hydrus-1D was applied. Results showed that shallow groundwater contributed a substantial share (up to 399 mm) to actual evapotranspiration of cotton (estimated at 488–727 mm), which alleviated water stress in response to suboptimal quantities of water applied for irrigation, but enhanced concurrently secondary soil salinization. Thus, pre-season salt leaching becomes a necessity. Nevertheless, as long as farmers face high uncertainty in irrigation water supply, maintaining shallow groundwater tables can be considered as a safety-net against unreliable water delivery. Simulations showed that in 2003 around 200 mm would have been sufficient during pre-season leaching, whereas up to 300 mm of water was applied in reality amounting to an overuse of almost 33%. Using some of this water during the irrigation season would have alleviated season crop-water stress such as in June 2003. Management strategy analyses revealed that crop water uptake would only marginally benefit from a permanent crop residue layer, often recommended as part of conservation agriculture. Such a mulch layer, however, would substantially reduce soil evaporation, capillary rise of groundwater, and consequently secondary soil salinization. The simulations furthermore demonstrated that not relying on the contribution of shallow groundwater to satisfy crop water demand is possible by implementing timely and soil-specific irrigation scheduling. Water use would then not be higher than the current Uzbek irrigation standards. It is argued that if furrow irrigation is to be continued, pure sandy soils, which constitute <5% of the agricultural soils in Khorezm, are best to be taken out of annual cotton production.     

Modelling the effects of climate variability and water management on crop water productivity and water balance in the North China Plain

In the North China Plain (NCP), while irrigation using groundwater has maintained a high-level crop productivity of the wheat-maize double cropping systems, it has resulted in rapid depletion of groundwater table. For more efficient and sustainable utilization of the limited water resources, improved understanding of how crop productivity and water balance components respond to climate variations and irrigation is essential. This paper investigates such responses using a modelling approach. The farming systems model APSIM (Agricultural Production Systems Simulator) was first calibrated and validated using 3 years of experimental data. The validated model was then applied to simulate crop yield and field water balance of the wheat-maize rotation in the NCP. Simulated dryland crop yield ranged from 0 to 4.5 t ha⁻¹ for wheat and 0 to 5.0 t ha⁻¹ for maize. Increasing irrigation amount led to increased crop yield, but irrigation required to obtain maximum water productivity (WP) was much less than that required to obtain maximum crop yield. To meet crop water demand, a wide range of irrigation water supply would be needed due to the inter-annual climate variations. The range was simulated to be 140-420 mm for wheat, and 0-170 mm for maize. Such levels of irrigation applications could potentially lead to about 1.5 m year⁻¹ decline in groundwater table when other sources of groundwater recharge were not considered. To achieve maximum WP, one, two and three irrigations (i.e., 70, 150 and 200 mm season⁻¹) were recommended for wheat in wet, medium and dry seasons, respectively. For maize, one irrigation and two irrigations (i.e., 60 and 110 mm season⁻¹) were recommended in medium and dry seasons, while no irrigation was needed in wet season.     

The role of supplemental irrigation and nitrogen in producing bread wheat in the highlands of Iran

The West Asia and North Africa (WANA) region, with a Mediterranean climate type, has an increasing deficit in cereal production, especially bread wheat. Rainfed cropping in the highlands of this region coincides with the severely cold winter with mostly, snow from November to April. Cereal yields, are low and variable mainly as a result of inadequate and erratic seasonal rainfall and associated management factors, such as late sowing (or late crop emergence). In an area where water is limited, small amounts of supplemental irrigation (SI) water can make up for the deficits in seasonal rain and produce satisfactory and sustainable yields. This field study (1999–2002) on a deep clay silty soil in north west of Iran was conducted with four SI levels (rainfed, 1/3, 2/3 and full irrigation requirements) combined with different N rates (0, 30, 60, 90 and 120 kg ha⁻¹) with one wheat variety (Sabalan). Yields of rainfed wheat varied with seasonal rainfall and its distribution. A delay in the crop emergence from October (SI treatment) to November (rainfed) consistently reduced yields. With irrigation, crop responses to nitrogen were generally significant up to 60 kg N ha⁻¹. An addition of only limited irrigation (1/3 of full irrigation) significantly increased yields and maximized water use efficiency (WUE). Use efficiency for water and N was greatly increased by SI. Under deficit irrigation, maximum WUE would be achieved when 60 kg N ha⁻¹ is combined with 1/3 of full SI. Early crop germination is essential to ensure adequate crop stand before the winter frost and to achieve high yield. Early emergence can be achieved by applying a small amount (40–50 mm) of SI after sowing. Thus, when limited SI is combined with appropriate management, wheat production can be substantially and consistently increased in this highland semi-arid zone.     

Agricultural water productivity assessment for the Yellow River Basin

Agricultural water productivity (WP) has been recognized as an important indicator of agricultural water management. This study assesses the WP for irrigated (WPI) and rainfed (WPR) crops in the Yellow River Basin (YRB) in China. WPI and WPR are calculated for major crops (corn, wheat, rice, and soybean) using experimental, statistical and empirically estimated data. The spatial variability of WPI and WRR is analyzed with regard to water and energy factors. Results show that although irrigated corn and soybean yields are significantly higher than rainfed yields in different regions of the YRB, WPI is slightly lower than WPR for these two crops. This can be explained by the seasonal coincidence of precipitation and solar energy patterns in the YRB. However, as expected, irrigation stabilizes crop production per unit of water consumption over space. WPI and WPR vary spatially from upstream to downstream in the YRB as a result of varying climate and water supply conditions. The water factor has stronger effects on both crop yield and WP than the energy factor in the upper and middle basin, whereas energy matters more in the lower basin. Moreover, WP in terms of crop yield is compared to that in terms of agricultural GDP and the results are not consistent. This paper contributes to the WP studies by a basin context, a comparison between WPI and WPR, a comparison of WP in terms of crop yield and economic value, and insights on the water and energy factors on WP. Moreover, policy implications based on the WP analysis are provided.     

Increasing water productivity in crop production—A synthesis

Scarcity of water resources and growing competition for water in many sectors reduce its availability for irrigation. Effective management of water for crop production in water scarce areas requires efficient approaches. Increasing crop water productivity (WP) and drought tolerance by genetic improvement and physiological regulation may be the means to achieve efficient and effective use of water. But only high water productivity values carry little or no interest if they are not associated with high or acceptable yields. Such association of high (or moderate) productivity values with high (or moderate) yields has important implications on the effective use of water. In this paper we discussed the factors affecting water productivity, and the possible techniques to improve water productivity. A single approach would not be able to tackle the forthcoming challenge of producing more food and fiber with limited or even reduced available water. Combining biological water-saving measures with engineering solutions (water saving irrigation method, deficit irrigation, proper deficit sequencing, modernization of irrigation system, etc.), and agronomic and soil manipulation (seed priming, seedling age manipulation, direct- or wet-seeded rice, proper crop choice, integrating agriculture and aquaculture, increasing soil fertility, addition of organic matter, tillage and soil mulching, etc.) may solve the problem to a certain extent. New scientific information is needed to improve the economic gains of WP because the future improvements in WP seem to be limited by economic rather than a lack of technological means.     

Application of a simulation based optimization model for winter wheat irrigation scheduling in North China

Irrigation needs to be scheduled properly for winter wheat, the main food crop in North China where the water resources are limited. We optimized the irrigation timing of crops under limited water supply by integrating a soil water balance model, dated water production function with cumulative function of water sensitivity index, and a nonlinear search method. The optimization produced the optimal irrigation date series with the predetermined irrigation quota for each application, which aims to obtain higher crop yield with limited irrigation water and be convenient for irrigation management. This simulation–optimization model was used to investigate the irrigation scheduling of winter wheat in Xiaohe irrigation Area in North China. Results show that optimal irrigation date series, corresponding relative yield and relative evapotranspiration are all closely related to the irrigation quota and initial soil water conditions. For rich and medium initial soil water conditions in medium precipitation year, it takes four times of irrigation (60 mm each time) after greening in order to obtain higher crop yield. But it increases to five times for poor initial condition. With limited irrigation water, irrigation should generally be applied in the preferential sequence of early May or late April (in the jointing stage), then mid and late May (in the heading stage), and finally March (in the greening stage). Irrigation should be applied earlier with lower initial soil water storage. Higher irrigation quota increases the crop yield but tends to decrease the marginal value, especially when irrigation quota exceeds 180 mm. The study also indicates that the optimized relative yield is generally higher than that obtained in field experiment. Based on the optimization, we proposed to use the quadratic polynomial function to describe the frontier water production function, which shows the mathematical relationship between optimized relative yield and relative evapotranspiration.     

Optimizing yield,water requirements,and water productivity of aerobic rice for the North China Plain

Water resources for agriculture are rapidly declining in the North China Plain because of increasing industrial and domestic use and because of decreasing rainfall resulting from climate change. Water-efficient agricultural technologies need to be developed. Aerobic rice is a new crop production system in which rice is grown in nonflooded and nonsaturated aerobic soil, just like wheat and maize. Although an estimated 80,000 ha are cultivated with aerobic rice in the plain, there is little knowledge on obtainable yields and water requirements to assist farmers in improving their management. We present results from field experiments with aerobic rice variety HD297 near Beijing, from 2002 to 2004. The crop growth simulation model ORYZA2000 was used to extrapolate the experimental results to different weather conditions, irrigation management, and soil types. We quantified yields, water inputs, water use, and water productivities. On typical freely draining soils of the North China Plain, aerobic rice yields can reach 6–6.8 t ha⁻¹, with a total water input ranging between 589 and 797 (rainfall = 477 m and water application = 112–320 mm). For efficient water use, the irrigation water can be supplied in 2–4 applications and should aim at keeping the soil water tension in the rootzone below 100–200 kPa. Under those conditions, the amount of water use by evapotranspiration was 458–483 mm. The water productivity with respect to total water input (irrigation plus rainfall) was 0.89–1.05 g grain kg⁻¹ water, and with respect to evapotranspiration, 1.28–1.42 g grain kg⁻¹ water. Drought around flowering should be avoided to minimize the risk of spikelet sterility and low grain yields. The simulations suggest that, theoretically, yields can go up to 7.5 t ha⁻¹ and beyond. Further research is needed to determine whether the panicle (sink) size is large enough to support such yields and/or whether improved management is needed.