Comparison of Physicochemical Properties and Structures of Sugary‐2 Cornstarch with Normal and Waxy Cultivars

Starches from normal, waxy, and sugary‐2 (su2) corn kernels were isolated, and their structures and properties determined. The total lipid contents of normal, waxy, and su2 corn starches were 0.84, 0.00, and 1.61%, respectively. Scanning electron micrographs showed that normal and waxy corn starch granules were spherical or angular in shape with smooth surfaces. The su2 starch granules consisted of lobes that resembled starch mutants deficient in soluble starch synthases. Normal and waxy corn starches displayed A‐type X‐ray patterns. The su2 starch showed a weak A‐type pattern. The chain‐length distributions of normal, waxy, and su2 debranched amylopectins showed the first peak chain length at DP (degree of polymerization) 13, 14, and 13, respectively; second peak chain length at DP 45, 49, and 49, respectively; and highest detectable DP of 80, 72, and 76, respectively. The su2 amylopectin showed a higher percentage of chains with DP 6–12 (22.2%) than normal (15.0%) and waxy (14.6%) amylopectins. The absolute amylose content of normal, waxy, and su2 starches was 18.8, 0.0, and 27.3%, respectively. Gel‐permeation profiles of su2 corn starch displayed a considerable amount of intermediate components. The su2 corn starch displayed lower gelatinization temperature, enthalpy change, and viscosity; a significantly higher enthalpy change for melting of amylose‐lipid complex; and lower melting temperature and enthalpy change for retrograded starch than did normal and waxy corn starches. The initial rate of hydrolysis (3 hr) of the corn starches followed the order su2 > waxy > normal corn. Waxy and su2 starches were hydrolyzed to the same extent, which was higher than normal starch after a 72‐hr hydrolysis period.     

Structural Changes of Debranched Corn Starch by Aqueous Heating and Stirring

Aqueous dispersions (2 mg/mL) of debranched corn starches of different amylose contents (waxy, normal, and high‐amylose) were subjected to extensive autoclaving and boiling‐stirring, and then the changes in starch chain profile were examined using medium‐pressure, aqueous, size‐exclusion column chromatography. As autoclaving time increased from 15 to 60 min, weight‐average chain length (CL_w) of waxy, normal, and high‐amylose corn starches determined using pullulan standards decreased from 46 to 41.2, from 122.1 to 96.3, and from 207.3 to 151.8, respectively. Number‐average chain length (CL_n) measured by the Nelson‐Somogyi method also decreased from 23.0 to 18.4, from 26.4 to 21.8, and from 66.5 to 41.5, respectively, indicating that thermal degradation of starch chains occurred. The CL_w/CL_n ratio for normal corn starch was higher than that for waxy corn starch, indicating an increase in polydispersity of the amylose fraction. Thermal degradation was also observed when the debranched starch was subjected to the boiling‐stirring treatment (0–96 hr). During 96 hr, the CL_w and relative proportion of B≥2 chains of amylopectin released by debranching waxy corn starch increased, whereas those of B1 chains decreased. This change may indicate physical aggregation of B1 chains. But branches from normal and high‐amylose corn starches showed increases in CL_w and the proportion of both B1 and B≥2 chains, along with substantial decreases in those of amylose chains. Therefore, thermal degradation of amylose was greater than that of amylopectin.     

Thermal Decomposition of Corn Starch with Different Amylose/Amylopectin Ratios in Open and Sealed Systems

Thermal decomposition of corn starches with different amylose to amylopectin ratios (0:100 waxy, 23:77 maize, 50:50 Gelose 50, 80:20 Gelose 80) were studied by thermogravimetric analysis (TGA) in an open system and differential scanning calorimetry (DSC) in a sealed system using stainless steel high‐pressure pans with varying water content (9–75%). The initial water content did not affect the decomposition temperature in the open system because all water evaporated from samples before reaching the decomposition temperature. The sequence of decomposition temperature of different starches is waxy > maize > G50 > G80 in an open system. The moisture content in starch remains constant during the degradation process in a sealed system. Two decomposition temperatures were observed in the sealed system: the first at lower temperature represents long chain scission and the second at higher temperature involves decomposition of the glucose ring. The sequence of the first degradation is waxy > maize > G50 > G80. There is no observable difference of the second degradation for the samples containing different amylose to amylopectin ratios. The higher the moisture content, the lower the second decomposition temperature. Decomposition of glucose was used to confirm the mechanisms proposed for the starch degradation.     

Relationships among the composition and physicochemical properties of starches with the characteristics of their films

The physical, molecular, and functional properties of corn, cassava, and yam starches were related to the film properties of these starches. Corn, cassava, and yam starches contained 25%, 19%, and 30% amylose, respectively. Amylose from yam starch showed the smallest molecular weight among the starches and amylopectin from corn starch the smallest molecular weight. Cassava starch presented a higher amylopectin content, and its gels and films were less strong, more transparent, and more flexible than corn and yam films. Plasticized films of the three starches were more flexible, with a higher strain and lower stress at break when the glycerol content increased. Unplasticized films were brittle and had water vapor permeability values ranging from 6.75 x 10(-10) to 8.33 x 10(-10) g m(-1) s(-1) Pa(-1). These values decreased when the glycerol content reached 20 g/100 g of starch because a more compact structure was formed. Then, at a glycerol content of 40 g/100 g of starch, the WVP increased because the film matrixes became less dense.     

Partial Characterization of Buckwheat (Fagopyrum esculentum) Starch

Laboratory-isolated buckwheat (Fagopyrum esculentum) starch was compared to commercial corn and wheat starches. Buckwheat starch granules (2.9–9.3 μm) were round and polygonal with some holes and pits on the surface. Buckwheat starch had higher amylose content, waterbinding capacity, and peak viscosity, and it had lower intrinsic viscosity when compared with corn and wheat starches. Buckwheat starch also showed restricted swelling power at 85–95°C and lower solubility in water at 55–95°C and was more susceptible to acid and enzymatic attack. Gelatinization temperatures, determined by differential scanning calorimetry, were 61.1–80.1°C for buckwheat starch compared to 64.7–79.2°C and 57.1–73.5°C for corn and wheat starches, respectively. A second endotherm observed at 84.5°C was an amylose-lipid complex attributed to the internal lipids in buckwheat starch, as evidenced by selective extraction. The retrogradation of buckwheat, corn, and wheat starch gels was examined after storage at 25, 4, and -12°C for 1–15 days. In general, buckwheat starch retrogradation was slower than that of corn and wheat starch, but it increased as storage time increased, as did that of the other starch pastes. When the values of the three storage temperatures were averaged for each storage period analyzed, buckwheat starch gels showed a lower percentage of retrogradation than did corn and wheat starch gels. Buckwheat starch also had a lower percentage of water syneresis when stored at 4°C for 3–10 days and had better stability to syneresis after three freeze-thaw cycles at -12 and 25°C.     

Effects of Amylose,Corn Protein,and Corn Fiber Contents on Production of Ethanol from Starch‐Rich Media

The effects of amylose, protein, and fiber contents on ethanol yields were evaluated using artificially formulated media made from commercial corn starches with different contents of amylose, corn protein, and corn fiber, as well as media made from different cereal sources including corn, sorghum, and wheat with different amylose contents. Second‐order response‐surface regression models were used to study the effects and interactions of amylose, protein, and fiber contents on ethanol yield and conversion efficiency. The results showed that the amylose content of starches had a significant (P < 0.001) effect on ethanol conversion efficiency. No significant effect of protein content on ethanol production was observed. Fiber did not show a significant effect on ethanol fermentation either. Conversion efficiencies increased as the amylose content decreased, especially when the amylose content was >35%. The reduced quadratic model fits the conversion efficiency data better than the full quadratic model does. Fermentation tests on mashes made from corn, sorghum, and wheat samples with different amylose contents confirmed the adverse effect of amylose content on fermentation efficiency. High‐temperature cooking with agitation significantly increased the conversion efficiencies on mashes made from high‐amylose (35–70%) ground corn and starches. A cooking temperature of ≥160°C was needed on high‐amylose corn and starches to obtain a conversion efficiency equal to that of normal corn and starch.     

Physicochemical Properties of Zero Amylose Hull-less Barley Starch

Zero amylose starch isolated from hull-less barley (HB) showed a typical A-type diffraction pattern. The X-ray analysis suggested that granules of zero amylose (SB94794) and 5% amylose (CDC Candle) HB starches had lower crystallinity than did commercial waxy corn starch. Differential scanning calorimetry showed lower transition temperatures and endothermal enthalpies for the HB starches than for the waxy corn starch. The zero amylose HB starch showed a Brabender pasting curve similar to that of waxy corn starch, but with lower pasting and peak temperatures and a higher peak viscosity. Noteworthy characteristics of zero amylose HB starch were its low pasting temperature and high paste clarity and freezethaw stability, which make this starch useful for many food and industrial applications.     

Significance of Amylose Content of Wheat Starch on Processing and Textural Properties of Instant Noodles

The effect of amylose content of starch on processing and textural properties of instant noodles was determined using waxy, partial waxy, and regular wheat flours and reconstituted flours with starches of various amylose content (3.0–26.5). Optimum water absorption of instant noodle dough increased with the decrease of amylose content. Instant noodles prepared from waxy and reconstituted wheat flours with ≤12.4% amylose content exhibited thicker strands and higher free lipids content than wheat flours with ≥17.1% amylose content. Instant noodles of ≤12.4% amylose content of starch exhibited numerous bubbles on the surface and stuck together during frying. Lightness of instant noodles increased from 77.3 to 81.4 with the increase of amylose content of starch in reconstituted flours. Cooking time of instant noodles was 4.0–8.0 min in wheat flours and 6.0–12.0 min in reconstituted flours, and constantly increased with the increase in amylose content of starch. Hardness of cooked instant noodles positively correlated with amylose content of starch. Reconstituted flours with ≤12.4% amylose content of starch were higher in cohesiveness than those of wheat flours of wild‐type and partial waxy starches and reconstituted flours with ≥17.1% amylose content. Instant fried noodles prepared from double null partial waxy wheat flour exhibited shorter cooking time, softer texture, and higher fat absorption (1.2%) but similar color and appearance compared with noodles prepared from wheat flour of wild‐type starch.     

Starch characterization and ethanol production of sorghum

This study aimed to characterize and compare the chemical structures, physical properties, and enzymatic hydrolysis rates of five sorghum starches (6B73, 6C21, 6C69, 7R34, and X789) with that of corn starch (B73). Sorghum kernels consisted of 68.7-70.6% starch, more than the B73 corn (67.4%). Sorghum starches displayed higher gelatinization temperatures (66.6-67.4 °C), greater gelatinization enthalpy changes (13.0-14.0 J/g), and greater percentages of retrogradation (60.7-69.1%), but slower enzymatic hydrolysis rates (83.8-87.8% at 48 h) than the B73 corn starch (61.7 °C, 10.1 J/g, 51.5%, and 88.5%, respectively). These differences could result from the sorghum amylopectins consisting of fewer short branch chains (DP 6-12) (12.8-14.0%) than the corn amylopectin (15.0%). The sorghum starches showed greater peak and breakdown viscosities but lower setback viscosities than the B73 corn starch, resulting from the lower amylose content of the sorghum starches. After 96 h of fermentation, most ground sorghums exhibited lower ethanol yields (30.5-31.8%) than the ground B73 corn (31.8%).     

Utilization of Oxidized and Cross-Linked Corn Starches in Wheat Flour Batter

Starch is often added to batters to improve the texture and appearance of fried food products. However, comparisons of commercially available starches in terms of batter characteristics are rare. In this study, various corn starches, native or modified, were mixed with wheat flour (20% dry solids basis), and the physical properties of the batters after deep-fat frying were examined. Native corn starches of different amylose contents (high-amylose, normal, and waxy) and chemically modified corn starches (oxidized and cross-linked) were tested. The batter was prepared by adding water to the starch-flour mixtures (42% solids) and deep-fat frying at 180°C for 30 sec. The texture of the fried batter was analyzed using a texture analyzer (TA) with a Kramer shear cell. The pasting viscosity profile of the starch-flour mixtures (7% solids in water) was also measured with a Rapid Visco Analyser. When the native corn starches of different amylose contents were compared, the crispness (peak number before breakage) and hardness (maximum peak force) measured using the instrument were positively correlated with the amylose content in starches but negatively correlated with the residual moisture content of the fried batters. The peak viscosity and breakdown in viscosity profiles of the starch-flour mixtures were also negatively correlated with crispness. The use of high-amylose corn starch was effective not only in increasing the crispness, but also in reducing the oil uptake. However, the fried batter containing high-amylose starch was denser and harder than the batter containing normal starch. Among the modified starches tested, oxidized (0.4% active Cl₂) and cross-linked (4% 99:1 mixture of STMP and STPP) starches showed improvements in the overall properties of the fried batters. With excessive oxidizations (>0.4% Cl₂), however, the crispness was reduced.     

Effects of β-amylolysis on the resistant starch formation of debranched corn starches

Retrograded amylose is resistant to digestion by amylolytic enzymes, which is known as resistant starch type III (RS3). In this study we investigated the effect of β-amylase hydrolysis on the formation and physicochemical properties of RS3 from debranched corn starches. Three types of corn starch (Hylon VII, Hylon V, and common corn) were first gelatinized and then hydrolyzed using β-amylase to varying degrees. The resultant hydrolyzed starch was debranched with isoamylase and then exposed to temperature cycling to promote RS formation. A broad endotherm from approximately 45 to 120 °C and a small endotherm above 150 °C were noted for all retrograded starches. All three corn starches had increased RS contents after moderate β-amylolysis, with Hylon V having the highest RS content at 70.7% after 4 h of β-amylolysis. The results suggest that RS3 formation is affected by the starch composition as well as the starch structure and can be increased by moderate β-amylolysis.     

Physical Properties of Extruded Strands of Hydroxypropylated Normal and High-Amylose Corn Starch

Normal (25% amylose) and high-amylose (70% amylose) corn starches (CS and HA) were hydroxypropylated to 0.1 degree of molar substitution (MS) with propylene oxide in an alkaline-ethanol medium (70% ethanol). CS and hydroxypropylated corn starch (HPCS) were mixed on dry basis with water and glycerol at a weight ratio of 7:2:1, and HA and hydroxypropylated high amylose corn starch (HPHA) were mixed at 7:3:1. Stearic acid, glycerol monostearate, or lecithin (3%, based on starch) was added to each mixture to examine the effects on the physical properties of the extrudate. The starch mixtures were extruded at high shear (100 rpm) to nonexpanded strands using a corotating twin-screw extruder in a temperature range of 75–90°C. HA, alone and with all additives, showed lower die swelling in extrusion than did CS, whereas HPCS and HPHA showed higher die swelling than the corresponding unmodified starches. Water absorption of all HA extrudates was lower than those of all CS extrudates (22–35% and 68–97%, respectively, at 25°C). Hydroxypropylation increased the absorption for both starches. All extruded starches, regardless of additives, showed low solubility in water (0.1–1.0% for 2 hr at 25°C). Differential scanning calorimetry indicated that during extrusion, the lipid additives formed a helical complex with amylose in CS and HA, but weakly with HPCS and HPHA. The extruded strands of HA, alone and with additives, exhibited higher tensile and bending strengths (37.1–58.4 and 2.16–5.07 MPa, respectively), compared to the CS strands (12.5–59.3 and 1.06–4.10 MPa, respectively) at the same moisture content (7.5–8.5%). Both tensile strength and percent of elongation of the starch strands were reduced by the presence of a lipid additive. Hydroxypropylation increased elongation and flexibility of the extrudates. HPHA exhibited the greatest mechanical strength and flexibility among the tested starches.     

Effect of Amylose Content on Gelatinization,Retrogradation, and Pasting Properties of Starches from Waxy and Nonwaxy Wheat and Their F1 Seeds

We studied the effect of amylose content on the gelatinization, retrogradation, and pasting properties of starch using wheat starches differing in amylose content. Starches were isolated from waxy and nonwaxy wheat and reciprocal F1 seeds by crossing waxy and nonwaxy wheat. Mixing waxy and nonwaxy wheat starch produced a mixed starch with the same amylose content as F1 seeds for comparison. The amylose content of F1 seeds ranged between waxy and nonwaxy wheat. Nonwaxy‐waxy wheat had a higher amylose content than waxy‐nonwaxy wheat. Endothermic enthalpy and final gelatinization temperature measured by differential scanning calorimetry correlated negatively with amylose content. Gelatinization onset and peak temperature clearly differed between F1 and mixed starches with the same amylose content as F1 starches. Enthalpy for melting recrystallized starches correlated negatively with amylose content. Rapid Visco Analyser measurement showed that F1 starches had a higher peak viscosity than waxy and nonwaxy wheat starches. Mixed starches showed characteristic profiles with two low peaks. Setback and final viscosity correlated highly with amylose content. Some of gelatinization and pasting properties differed between F1 starches and mixed starches.     

Genetic Diversity in Properties of Starch from Zimbabwean Sorghum Landraces

Starch was isolated from 95 sorghum landraces from Zimbabwe using an alkali steep and wet‐milling procedure. The physicochemical properties of sorghum starch were examined for potential use in Southern Africa. All the landraces evaluated had a normal endosperm indicated by the amylose content of the starches. Starch properties were not correlated to most of the physical grain quality traits evaluated. Grain hardness was weakly correlated to starch gel adhesiveness (r = 0.36) and amylose content (r = 0.38) (P < 0.001). The mean peak viscosity (PV) of the sorghum starches was 324 Rapid Visco Analyser units (RVU) compared with 238 RVU in a commercial corn starch sample; PV was 244–377 RVU. Some landraces had low shear‐thinning starches, implying good paste stability under hot conditions. Pasting properties were highly correlated among the sorghum starches. The starch gel hardness showed considerable variation (44–71 g) among the landraces. Gelatinization peak temperatures were 66–70°C. The thermal properties of starches were not correlated with starch swelling and pasting properties. Genotype grouping by highest and lowest values in each category would allow selection of sorghums based on a specific attribute depending on the desired end use.     

Barley grain constituents, starch composition, and structure affect starch in vitro enzymatic hydrolysis

The relationship between starch physical properties and enzymatic hydrolysis was determined using ten different hulless barley genotypes with variable carbohydrate composition. The ten barley genotypes included one normal starch (CDC McGwire), three increased amylose starches (SH99250, SH99073, and SB94893), and six waxy starches (CDC Alamo, CDC Fibar, CDC Candle, Waxy Betzes, CDC Rattan, and SB94912). Total starch concentration positively influenced thousand grain weight (TGW) (r(2) = 0.70, p < 0.05). Increase in grain protein concentration was not only related to total starch concentration (r(2) = -0.80, p < 0.01) but also affected enzymatic hydrolysis of pure starch (r(2) = -0.67, p < 0.01). However, an increase in amylopectin unit chain length between DP 12-18 (F-II) was detrimental to starch concentration (r(2) = 0.46, p < 0.01). Amylose concentration influenced granule size distribution with increased amylose genotypes showing highly reduced volume percentage of very small C-granules (<5 μm diameter) and significantly increased (r(2) = 0.83, p < 0.01) medium sized B granules (5-15 μm diameter). Amylose affected smaller (F-I) and larger (F-III) amylopectin chains in opposite ways. Increased amylose concentration positively influenced the F-III (DP 19-36) fraction of longer DP amylopectin chains (DP 19-36) which was associated with resistant starch (RS) in meal and pure starch samples. The rate of starch hydrolysis was high in pure starch samples as compared to meal samples. Enzymatic hydrolysis rate both in meal and pure starch samples followed the order waxy > normal > increased amylose. Rapidly digestible starch (RDS) increased with a decrease in amylose concentration. Atomic force microscopy (AFM) analysis revealed a higher polydispersity index of amylose in CDC McGwire and increased amylose genotypes which could contribute to their reduced enzymatic hydrolysis, compared to waxy starch genotypes. Increased β-glucan and dietary fiber concentration also reduced the enzymatic hydrolysis of meal samples. An average linkage cluster analysis dendrogram revealed that variation in amylose concentration significantly (p < 0.01) influenced resistant starch concentration in meal and pure starch samples. RS is also associated with B-type granules (5-15 μm) and the amylopectin F-III (19-36 DP) fraction. In conclusion, the results suggest that barley genotype SH99250 with less decrease in grain weight in comparison to that of other increased amylose genotypes (SH99073 and SH94893) could be a promising genotype to develop cultivars with increased amylose grain starch without compromising grain weight and yield.     

Physicochemical Properties of Pueraria Root Starches and Their Effect on the Improvement of Buckwheat Noodle Quality

The physicochemical properties of starches from cultivated Pueraria thomsonii Benth were examined and compared with those of P. lobata (Willd.) Ohwi and other root starches, and the effect of pueraria root starches on the improvement of buckwheat noodle quality was investigated. The total content of isoflavones in P. thomsonii root starches was higher than in P. lobata root starches, and the size and uniformity of those particles displayed a significant difference. The gel stabilities of pueraria root starches were similar and more favorable than those of potato starch and sweet potato starch. For the amylose molecular properties of pueraria root starches, the λ_max and blue value index were higher than those of the potato starch and the sweet potato starch, whereas the amylose content and degree of polymerization were much lower in comparison. However, amylopectin branch lengths of pueraria root starches were shorter. Thus, pueraria root starches could improve the quality of buckwheat noodles and enhance their nutritional function. Therefore, pueraria root starches may be regarded as raw materials that influence the quality of buckwheat noodles.     

Rheological and physicochemical properties of starches from moist- and dry-type sweetpotatoes

Although starch makes up from 50 to 70% of sweetpotato (SP) dry matter, its role in cooked texture is unknown. The purpose of this research was to characterize raw starches isolated from SP cultivars and experimental selections (C/S) with a wide range of textural properties when cooked and to investigate the relationship between textural properties of the cooked roots and characteristics of the isolated starches. Shear stress measured by uniaxial compression of cooked SP cylinders served as an objective measure of SP texture. Starches were isolated from C/S representing three SP texture types: moist (Jewel and Beauregard); intermediate (NC10-28 and NC2-26); and dry (NC6-30 and NC8-22). The following parameters of isolated starches were measured: amylose content by colorimetric and differential scanning calorimetric (DSC) methods; swelling power, solubility, gelatinization enthalpy (DeltaH), and pasting properties by Brabender amylograph (BA) and rapid viscoanalyzer (RVA). Pasting temperatures for SP C/S measured by BA and RVA were significantly correlated. Due to high shear degradation in RVA, RVA viscosities of starch suspensions decreased as much as 40% during cooking at 95 degrees C, whereas the BA viscosities changed little at this temperature. There were no statistically significant differences among the C/S for amylose or DeltaH. However, significant C/S differences in swelling power, solubility, and pasting properties were observed. Although differences in some rheological and physical properties were observed for C/S starches, shear stress was statistically correlated only with DSC onset temperature (r = 0.78), indicating that factors other than the properties measured on isolated starches are mainly responsible for the texture of cooked SP C/S.     

Effect of green tea catechins on the postprandial glycemic response to starches differing in amylose content

The effect of tea polyphenols (TPLs), specifically tea catechins, on the postprandial glycemic response to cooked starches differing in amylose contents was investigated. The in vivo test using a mouse model showed a moderate reduction of the postprandial glycemic response to co-cooked normal (containing 27.8% amylose) or waxy corn starch with 10% TPLs (dry weight of starch), while an augmented glycemic response with a delayed blood glucose peak was observed when high amylose corn starch (HAC, containing 79.4% amylose) was used as the starch component. Enzyme kinetics results demonstrated that TPLs noncompetitively inhibit the digestion of waxy or normal corn starch, while the digestion rate of HAC starch was increased in the presence of TPLs, which supports the observed postprandial glycemic responses. Further studies using X-ray powder diffraction showed that the diffraction intensity (area under the diffraction curves) of normal and HAC starch was increased by 45% and 74%, respectively, whereas no change was observed for waxy corn starch. Consistently, dynamic laser light scattering studies using a solution of pure amylose showed an increased hydrodynamic radius of amylose molecules from ～54 nm to ～112 nm in the presence of TPLs. These experimental results indicate that there might exist an interaction between TPLs and amylose, which facilitates the association of amylose molecules to form a special nonordered structure that can produce a high and sustained postprandial glycemic response. Thus, a combination of tea polyphenols and specific starches could be used to manipulate postprandial glycemic response for glycemic control and optimal health.     

Paste Properties of Modified Starches from Partial Waxy Wheats

Properties of modified starches from partial waxy wheats have not been examined. Protease digestion of cracked kernels of three hard winter wheats varying in amylose content led to 82–85% recovery of starch, whereas kneading of the flour-water doughs gave 75–83% recovery. All starches had a protein content of <0.3% and ash content of <0.01%. Granule size distributions showed that starch from Ike kernels contained 86% A-type granules with a peak size of ≈18μm, and Karl-92 starch contained 77% A-type granules with a peak size of ≈16μm. The A-type granules (82%) from Rio Blanco starch were intermediate in size. The amylose content of Karl-92 starch, determined by concanavalin-A precipitation of amylpectin, was 28%, which was 17% higher than that of Ike starch (23%). The amylose content of Rio Blanco starch was 26%. The lipid content of Karl-92 starch, determined as fatty acid methyl esters, also was 18% higher than that of Ike starch (601 vs. 488 mg/100 g of starch, respectively). Wheat starches were modified with hydroxypropyl (HP) groups to low (1.5–2.5%) and medium (≈4.0%) levels, and the HP starches were cross-linked with phosphoryl chloride at levels of 0.003–0.075%. Pasting curves (amylograms) showed that Ike starch substituted with a low level of HP and optimally cross-linked with 0.025% phosphoryl chloride (starch basis) had a greater paste consistency than low HP cross-linked Karl-92, and Rio Blanco starches. At 4% HP and optimum cross-linking (0.003% phosphoryl chloride), the paste consistencies of the modified starches were nearly the same. The clarity of unmodified Ike starch paste was higher than that of Karl-92 or Rio Blanco starch pastes, and the clarity of all three pastes decreased as cross-linking was increased. Unmodified Ike starch formed a stronger gel than unmodified Karl-92 and Rio Blanco starches, but gel properties largely converged as the starches were modified.     

Effects of Amylopectin Branch Chain Length and Amylose Content on the Gelatinization and Pasting Properties of Starch

Structures and properties of starches isolated from different botanical sources were investigated. Apparent and absolute amylose contents of starches were determined by measuring the iodine affinity of defatted whole starch and of fractionated and purified amylopectin. Branch chain-length distributions of amylopectins were analyzed quantitatively using a high-performance anion-exchange chromatography system equipped with a postcolumn enzyme reactor and a pulsed amperometric detector. Thermal and pasting properties were measured using differential scanning calorimetry and a rapid viscoanalyzer, respectively. Absolute amylose contents of most of the starches studied were lower than their apparent amylose contents. This difference correlated with the number of very long branch chains of amylopectin. Studies of amylopectin structures showed that each starch had a distinct branch chain-length distribution profile. Average degrees of polymerization (dp) of amylopectin branch chain length ranged from 18.8 for waxy rice to 30.7 for high-amylose maize VII. Compared with X-ray A-type starches, B-type starches had longer chains. A shoulder of dp 18–21 (chain length of 6.3–7.4 nm) was found in many starches; the chain length of 6.3–7.4 nm was in the proximity of the length of the amylopectin crystalline region. Starches with short average amylopectin branch chain lengths (e.g., waxy rice and sweet rice starch), with large proportions of short branch chains (dp 11–16) relative to the shoulder of dp 18–21 (e.g., wheat and barley starch), and with high starch phosphate monoester content (e.g., potato starch) displayed low gelatinization temperatures. Amylose contents and amylopectin branch chain-length distributions predominantly affected the pasting properties of starch.