Microscopic processes of shearing fracture of old wood, examined using the acoustic emission technique

We examined the process of microscopic fracturing peculiar to old wood, based on the generation characteristics of acoustic emission (AE) events and fracture surface analysis. The shearing tests of old wood obtained from construction-derived lumber and new wood within 3 years after lumbering were performed in accordance with the Japanese Industrial Standards (JIS Z 2101-1994). The species of wood used in this study was Japanese red pine. The old wood had been used as a beam in a building for 270 years. The number of the occurrences of AEs at low load levels was larger in the old wood than in the new wood. As a result of analyzing the AE amplitude distributions, we found that the period in which AEs with small amplitudes were frequently generated was longer in the old wood than in the new wood. Also, the fracture surfaces after the final rupture under scanning electron microscope showed more uneven and complicated surfaces in the old wood. Based on the above findings, we presume that during the shearing test the old wood underwent a relatively long and stable progress of microcracking before the final fracture.     

Acoustic emission monitoring during partial compression to detect early stages of decay

Summary The acoustic emissions (AEs) under partially compression were monitored with two softwood and one hardwood specimens in very eary stages of decay by a brown- and a white-rot fungus. Even slightly decayed specimens emitted AEs immediately after beginning of loading, typically when partial compression stress was applied to brown-rotted wood with the flat-headed attachment. With sound specimens of three wood species, only a few AEs were generated until the load reached at the proportional limit. These results suggest that AE monitoring will be one of the feasible means to detect the incipient stages of decay in a field test.The authors thank the Weyerhaeuser Research Grants Program for its aid in this investigation     

Advanced wireless sensors for termite detection in wood constructions

Considering the decay risk of wood structures in temperate regions and the need to implement environmentally sound and healthy safe integrated pest management strategies, the main objective of this research was to detect xylophagous insects (especially termites) at an early stage as well as to relate the wood conditions in buildings (moisture content and temperature) to the infestation risk of the main wood-rotting fungi. To do this, an advanced sensor was developed. It sends a wireless alarm with the indication of termite activity inside the wood or with the warning signal that the conditions in the wood make it vulnerable to fungal settlement. After investigating the main detection parameters and testing different prototypes under varying laboratory conditions, a final sensor was developed for use in real conditions. Furthermore, a wireless network of these biodegradation sensors was developed and installed in three representative buildings for their automatic monitoring, forming an integral alarm system for wood degradation activity supported by an advanced remote sensing management.     

Leachability,decay, and termite resistance of wood treated with metaborates

The formation of insoluble metaborates in wood was investigated by impregnating the wood with borax and metallic salts, after which their properties (e.g., leachability in running water and biological resistance) were evaluated. The solubility of three metaborates in acidic solutions was also evaluated. Double-diffusion treatment was carried out to form the precipitates of metaborates in sapwood specimens of Japanese cedar (Cryptomeria japonica) at room temperature. Water-saturated wood specimens were first impregnated by a saturated borax solution and then diffuse-penetrated with Zn²⁺, Ca²⁺, or Pb²⁺ solution. The precipitates of the three metaborates in the wood proved to be insoluble or hardly soluble in water by the leaching test. With the decay test using a brown-rot fungus (Fomitopsis palustris) and a white-rot fungus (Trametes versicolor) and with the termite test using a virulent subterranean termite (Coptotermes formosanus), the metaborate-treated woods showed generally good decay and termite resistance with negligible mass loss of the specimens. Particularly, the lead metaborate formed in the wood provided superb biological resistance against decay and termite attacks. In addition, the precipitates of these metaborates were found to be soluble in acidic solution, suggesting a way to remove these chemicals from wood when disposing of waste materials.     

Development of a monitoring system for guided circular saws: an experimental investigation

ABSTRACT

Lack of a monitoring system for guided circular saws marks one of the most critical machines in sawmills as a production bottleneck. Monitoring systems are being researched and developed for machine tools, especially for the metal cutting industry; but there are limited studies on the development of monitoring systems for circular saws in wood manufacturing process. In this study, sensors with the possibility to indicate sawing deviation were chosen that could be mounted in or on the saw guides. The sensors were: a microphone, an accelerometer, temperature sensor, an acoustic emission (AE) sensor, and a newly developed displacement sensor. A load cell was used to measure the lateral force on the guides. The outputs from these sensors were compared to the standard deviation of the board surface measured at the top of the cut. The signals from the displacement sensor, microphone, accelerometer, guide force sensor, and AE senor had no correlation to changes in the sawing deviation as measured by the standard deviation at the top of the board. Under laboratory conditions, the sound level and the AE signal did indicate the beginning and end of the cut. It was found that blade temperature is a good indicator of saw cutting performance. A newly developed temperature sensor can provide accurate temperature of the saw during cutting. The sensor can be used for measuring the rate of heating to cooling over time which can be used as a monitoring system to detect if there is any issue in the system.     

Evaluation of the temperature and relative humidity preferences of the western dry-wood termite <Emphasis Type="Italic">Incisitermes minor</Emphasis> (Hagen) using acoustic emission (AE) monitoring

Twenty-four different combinations of six temperatures (15°, 20°, 25°, 30°, 35°, and 40°C) and four relative humidity (RH) (60%, 70%, 80%, and 90%) conditions were used for pseudergates of the western dry-wood termite Incisitermes minor (Hagen). The feeding activities of the termites were monitored by the detection of generated acoustic emission (AE) events from feeder wood blocks in a test chamber. Temperature and RH showed independent and interactive significant effects on the feeding activity of I. minor. The optimal temperature and RH conditions for the feeding activities were 35°C and 70%, respectively, and the optimal combinations were 35°C-70% and 35°C-80% with an exceptionally higher feeding activity at the combination condition of 30°C-70%.     

Evaluation of the concentrations of hydrogen and methane emitted by termite using a semiconductor gas sensor

A gas detection apparatus equipped with a semiconductor gas sensor was employed for qualitative and quantitative measurement of hydrogen and methane emitted by termites. A gas sample of 2.5 ml was injected into the semiconductor gas sensor through the gas detection apparatus, and the maximum voltage of the sensor was converted into gas concentration. The gas samples were collected from three distinct experiments: (1) five combinations of workers and soldiers of Coptotermes formosanus with and without a wood specimen; (2) C. formosanus under six temperature conditions; and (3) four different termite species, C. formosanus, Reticulitermes speratus, Incisitermes minor, and Zootermopsis nevadensis. The hydrogen and methane concentrations increased with an increase in the number of termites. Concentrations were higher in samples with a wood specimen than without it. Both hydrogen and methane concentrations were the highest for the samples at 35 °C and were lowest at 15 and 5 °C. The concentrations were very low at 45 °C because all the termites had died in a few hours. The concentrations of hydrogen and methane were highest for Z. nevadensis, the dampwood termite, among the four species, and no methane was detected for I. minor, the drywood termite, at 28 °C and 75 % RH.     

Resistance of gamma-irradiated sapwood of <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> to biological attacks

Any means helpful for the promotion of termite feeding activity has potential for use in a matrix in termite bait application. Therefore, energy transfer by gamma irradiation is worthy of consideration for converting wood into termite-accessible material. Wood specimens gamma-irradiated at 100 kGy and at lower levels were tested for their degrees of polymerization (DP) of cellulose and biological resistance. The DP of cellulose adversely decreased with increased doses of gamma irradiation. Termite wood consumption rates, which were determined by laboratory tests using undifferentiated larvae (workers) of Coptotermes formosanus Shiraki, were significantly higher at 100 kGy than at other doses. On the other hand, the decay resistance of gamma-irradiated wood against the fungi Fomitopsis palustris (Berkeley et Curtis) Murrill and Trametes versicolor (L. ex Fr.) Quel did not vary by irradiation dose.     

Changes of decay and termite durabilities of Japanese larch (Larix leptolepis) wood due to high-temperature kiln drying processes

We investigated the effects of high-temperature drying schedules (120°–130°C) on decay and termite feeding of Japanese larch timbers. Thermogravimetric analysis was conducted to investigate changes of the wood components. Decay and termite feeding tests showed that specimens dried under high-temperature schedules were susceptible against a decaying fungus Fomitopsis palustris and attacks from termites Coptotermes formosanus and Reticulitermes speratus. These drying schedules changed chemical components, which were suggested by the thermal analytical result compared to the control sample. The results of this study indicated that the acceleration of termite feeding takes place even under temperatures that are comparatively lower than that used in our previous research in which 170°C steaming treatment was applied to Japanese larch wood. Decay durability against a brown rot fungus also decreased, possibly from production of low molecular weight fragments when hemicellulose decreased during the high-temperature drying processes.     

Termite resistance and color of heartwood of hinoki (Chamaecyparis obtusa) trees in 5 half-sib families in a progeny test stand in Kyushu, Japan

Hinoki (Chamaecyparis obtusa) wood has been used as a structural material in Japan because of its superior mechanical properties, its excellent durability and the beautiful color of its heartwood. Variations of termite resistance and compositions of extractives among hinoki trees have been reported. However, genetic variation of termite resistance and the effect of heartwood color on termite resistance remain unknown. In this study, we report the characteristics of termite resistance and color indexes (L*, a* and b*) of heartwood of hinoki half-sib families in a progeny test stand. The survival days of termites and the mass loss of samples of hinoki heartwood differed significantly among hinoki families. Families with red-color heartwood had larger termite resistance than families with yellow-color heartwood. The termite resistances of individual samples from two families with yellow-color heartwood were as small as that of Pinus densiflora. Larger a* and smaller b* induced larger termite resistance of heartwood. The effect of DBH (diameter at breast height) of hinoki trees on termite resistance of hinoki families was small.     

Termite feeding preference to four wood species after gamma irradiation

The effect of gamma irradiation at 100 kGy and at lower levels on termite resistance was examined in the laboratory by no-choice and choice feeding termite tests (Coptotermes formosanus Shiraki) using four wood species: sapwood of Cryptomeria japonica D. Don, and heartwoods of Pseudotsuga menziesii (Mirbel) Franco, Larix kaempferi (Lambert) Carriere, and Chamaecyparis obtusa Endl. The wood consumption rates in C. japonica and P. menziesii specimens were likely to increase with increases in gamma-irradiation levels, whereas little effect of gamma irradiation was seen in L. kaempferi and C. obtusa. Similar results were obtained in the two-choice test. The current results indicated that in the two-choice test with C. formosanus, 100-kGy-irradiated C. japonica and P. menziesii, which are not rich in antitermite substances, were eaten more than other wood samples with or without gamma irradiation. However, only C. japonica showed significant difference in termite feeding activity. The mass loss in 100-kGy-irradiated C. japonica was significantly higher in the multichoice test.     

纤维板热磨机磨片材质开发与研究

Defibrator is a very important machine in the wood industry for producing fiberboard.The refiner plates are the key parts of defibrator that directly act with the wood,and broken easily.The working life of the refiner plates is of significance to the wood industry.It may affect refining quality,production efficiency,and power consumption.In this paper,the abrasion resistance of the refiner plate made of different materials,the stainless steels and high chromium cast irons,were tested and compared.The results showed that abrasion resistance of refiner plate made of high chromium cast irons was better than that of the stainless steel materials.Although the two kinds of materials have the same compositions,their abrasion resistances have apparent difference.The main reason is that the material microstructures have very important effects on their performance.The refiner plates made of developed high chromium cast irons don‘t demand the complex heat treatment.This can simplify the producing process,save the cost of production,decrease labor strength,and increase the production efficiency.     

Acoustic emission from softwoods in tension

Summary Acoustic emission (AE) monitoring is a non-destructive testing technique widely used to detect flaw development and crack propagation in metals, ceramics, polymers and composite materials.This paper relates the AE-strain characteristics from three softwoods tested in tension to mechanisms of deformation observed by scanning electron microscopy. All wood specimens are identical in size and radial-longitudinal in orientation, enabling the path of failure through planes of earlywood and latewood to be examined.It is found that the proportion of earlywood to latewood in each species has a marked effect on the shape of the AE-strain curves. Parana pine, containing very few latewood tracheids, exhibits a close to linear relationship between log cumulative emissions and strain until close to failure when the count rate increases rapidly. Douglas-fir, which has well-defined earlywood-latewood boundaries generates many AEs at low strain and there is greater variation in the shape of the AE characteristic between samples.Parana pine and Douglas-fir are tested at 20 °C (12.5 % EMC). Scots pine is also stressed at 20°C (12.5%EMC), 20°C (0.7%EMC) and 80°C (0.7%EMC), to assess the effect of moisture content on AE.Values of Young's modulus, stress at failure and work of fracture for the three softwoods are compared with the AE-strain data. Although the work of fracture is related to the total AEs to failure, no direct proportionality exists between the two parameters.Finally, the AE-strain data for plywood and glass-reinforced plastic (GRP), both man-made composite materials, are compared with those of wood, the natural composite material.S.R.C. support for this work under grant No. GR/A/13257 is gratefully acknowledged. The support of Professor Bryan Harris of the School of Materials Science, University of Bath and Dr. J. M. Dinwoodie of the Building Research Establishment, Princes Risborough is greatly appreciated. Mr. B. Dobraszczyk performed the impact tests.     

基于声发射技术模拟蛀木害虫羽化孔洞缺陷检测

[目的]针对木材蛀干害虫羽化孔洞缺陷检测问题,通过对声发射信号的时频分析,研究木材蛀干害虫羽化孔洞缺陷的AE信号特征.[方法]首先,对无孔洞和3种不同尺寸的钻孔缺陷的木材试件,参照ASTM-E976标准采用铅芯折断方式产生AE源,通过采样频率为500 kHz的2通道木材声发射信号采集系统获取原始AE信号.然后,对原始A...     

Laboratory evaluation of the termiticidal efficacy of copper HDO

A laboratory no-choice termite bioassay was conducted to evaluate the ability of copper HDO (CX-A or copper xyligen) to protect radiata pine (Pinus radiata D. Don) wood samples from attack by two subterranean termite species, Reticulitermes speratus and Coptotermes formosanus. A series of sapwood samples were pressure treated with either 0.25%, 0.50%, 0.75%, or 1.00% copper HDO solution. Samples treated with equivalent concentrations of a benchmark preservative, CCA-C, were used as treated controls. All samples (including controls) were subjected to an artificial weathering schedule before the bioassay. The samples were exposed to 30-day R. speratus tests and 3-week C. formosanus tests. Copper HDO was shown to deter termites from significant feeding on the treated wood. At a retention of 5.8 kg/m3 (treated with 0.75% solution) or higher, the mass loss from termite feeding did not exceed 3% for both the 30-day R. speratus tests and the 3-week C. formosanus tests. At each of the retentions tested, copper HDO performed comparably with equivalent retentions of CCA-C; however, field data are needed to validate these laboratory results. The preliminary findings are that copper HDO pressure treatment has potential as a viable method of protecting wood from attack by both termite species tested.     

Termite resistance of beech wood treated with zinc oxide and zinc borate nanocompounds*

The field of wood protection is currently changing due to the restrictions imposed by the Biocidal Products Regulation. The need for development of new wood protection technologies is therefore growing. In this work, the resistance of European beech (Fagus sylvatica L.) wood impregnated with nano-dispersions of zinc oxide (nano-ZnO) and zinc borate (nano-ZnB) against the termite Reticulitermes grassei Clement was investigated. Three different concentrations (0.5%, 1%, 2%) of the nanocompounds were tested. The effects of water leaching were also investigated. A severe effect in terms of termite workers mortality was induced by both dispersions, even at the lowest concentration. In terms of termite feeding, nano-ZnO dispersions appeared to be more efficient than nano-ZnB as they induced significant improvement at concentrations as low as 0.5%. Nano-ZnB was applied at 1% or higher concentrations in order to impart similar changes. Nano-ZnB dispersions were efficient in terms of termite resistance for a concentration at least 1%. Further increasing concentration to 2% resulted in a respective increase of wood efficacy against termites. For both tested nanocompounds, water leaching did not result in any significant increase of termite feeding.     

Stem tangential strain on the tension wood side of <Emphasis Type="Italic">Fagus crenata</Emphasis> saplings

The tangential strain on the inner bark surface of Fagus crenata sapling stems was continuously measured using strain gauges. The total strain increased daily, increasing at night and decreasing during the day. When tension wood was induced by artificial inclination, the strain increased more on the upper side than on the lower side; and the increment in the strain at night was larger on the upper side than on the lower. The change in tangential strain on the inner bark surface arose from changes in the water content and the volume of differentiating cells. Differentiating tension wood fibers appear to contain more water and to expand more at night than differentiating normal wood fibers. We can determine whether tension wood is formed from the tangential strain during growth.     

Screening method for wood extractives: direct cellulose thin-layer chromatography plate

A method for screening wood extractives was developed using cellulose thin-layer chromatography plate (Cell-TLC) separation and was directly applied to bioassays. Wood meal (60 mesh) from nangka (Artocarpus heterophyllus Lamk) heartwood was extracted with hot methanol. The crude extract was separated using a Cell-TLC plate (50 × 50mm). Two broad bands with R_f values of 0.46 and 0.96 were found, and the bands showed completely different effects against the pest termite Coptotermes formosanus Shiraki and the decay fungus Fomitopsis palustris. The band with R_f 0.46 was preferentially consumed by workers of C. formosanus, and it did not show any growth inhibition against F. palustris when the Cell-TLC plate was directly exposed to the organism. In contrast, the band with R_f 0.96 appeared to repel strongly the feeding by C. formosanus and inhibited the growth of F. palustris. It was concluded that the Cell-TLC system was applicable for screening wood extracts consisting of many compounds.     

A novel control strategy for dry-wood termite <Emphasis Type="Italic">Incisitermes minor</Emphasis> infestation using a bait system

Three types of experiments were designed to evaluate the performance of a bait system intended to control Incisitermes minor (Hagen). In the first type of experiment, Type I, the effectiveness of the bait in a small wood specimen was evaluated. In the second type, Type II, the bait effectiveness was evaluated in a larger wood specimen. Feeding arena lumber with artificial galleries was prepared for the Type III experiment so that the response of the insects to the gel could be observed. In general, the average percentage of termites that died after being exposed to the gel formulation in all three types of experiment was more than 60%, and in the gel control the average percentage of live termites was more than 95% in Types I and III, and more than 75% in Type II. These results suggest that the gel bait system used in this study has the potential to eliminate I. minor colonies. Further investigation will be necessary to increase the reliability of the bait system as a control measure against dry-wood termites.     

CMC系列防腐剂对毛竹材的防霉效果

以3～4年生新伐毛竹为试材,以青霉、木霉、黑曲霉为试菌,与常用的竹材防霉剂硼酸(HBO3)、百菌清等进行比较,对壳聚糖金属配合物(CMC)系列的壳聚糖铜配合物(CCC)、壳聚糖锌配合物(CZC)的防霉性能进行测试.结果表明:CCC和百菌清对木霉、青霉、黑曲霉防治效果均优于CZC、壳聚糖和硼酸;相比之下,CCC对青霉防治效果优于百菌清,而百菌清对木霉防治效果优于CCC.