Environmental effects on seed yield determination of irrigated peanut crops: Links with radiation use efficiency and crop growth rate

In Argentina, delayed sowing causes a decrease in seed yield and in radiation use efficiency (RUE) of peanut crops (Arachis hypogaea L.), but it is not known if RUE reduction is mainly due to reduced temperature during late reproductive stages or to a sink limitation promoted by decreased seed number in these conditions. We analyzed seed yield determination and RUE dynamics of two cultivars (Florman and ASEM) in four irrigated field experiments (Exp_n) grown at three sites and five contrasting sowing dates (between 17 October and 21 December) in three growing seasons. An additional field experiment was performed with widely spaced plants (i.e. with no interference among them) to evaluate the effect of peg removal on RUE and leaf carbon exchange rate (CER). Seasonal dynamics of mean air temperature and irradiance, biomass production (total and pods), and intercepted photosynthetically active radiation (IPAR) were followed. Seed yield and seed yield components (pod number, seeds per pod, seed number and seed weight) were determined at final harvest. Crop growth rate (CGR) and pod growth rate (PGR) were computed for growth phases of interest. RUE values for crops sown until 14 November were 1.89–1.98 g MJ⁻¹ IPAR, within the usual range. RUE decreased significantly for cv. Florman in the late sowing of Exp₁ (29 November) and for both cultivars in Exp₃ (21 December sowing). Across experiments, seed yield (4.5-fold variation relative to minimum) was strongly associated (r² = 0.87, P < 0.0001) with variations in seed number (3.5-fold variation relative to minimum), and to a lesser extent (r² ≤ 0.54, P ≤ 0.001) to variations in seed weight (1.9-fold variation relative to minimum). Seed number was positively related (P < 0.01) to CGR (r² = 0.66) and to PGR (r² = 0.72) during the R₃–R_6.5 phase (seed number determination window), while crop growth during the grain-filling phase (i.e. between R_6.5 and final harvest) was positively associated with grain number (r² = 0.80, P < 0.001). No association was found between RUE and mean air temperature, neither for the whole cycle nor for the phase between R_6.5 and final harvest, which showed the largest temperature variation (16.4–22.4 °C) across experiments. Use of mean minimum temperature records (range between 13.8 and 18.5 °C) did no improve the relationship. However, grain-filling phase RUE showed a positive (r² = 0.69, P = 0.003) linear response to seed number across experiments. This apparent sink limitation of source activity was consistent with the reduced RUE (from 2.73 to 1.42 g MJ⁻¹ IPAR) and reduced leaf CER at high irradiance (from ca. 30 to 15 μmol m⁻² s⁻¹) for plants subjected to 75% peg removal.     

Characterizing leaf gas exchange responses of cotton to full and limited irrigation conditions

Plant responses to water deficit need to be monitored for producing a profitable crop as water deficit is a major constraint on crop yield. The objective of this study was to evaluate physiological responses of cotton (Gossypium hirsutum) to various environmental conditions under limited water availability using commercially available varieties grown in South Texas. Soil moisture and variables of leaf gas exchange were measured to monitor water deficit for various varieties under different irrigation treatments. Lint yield and growth variables were also measured and correlations among growth parameters of interest were investigated. Significant differences were found in soil moisture, leaf net assimilation (A_n), stomatal conductance (g), transpiration rate (T_r), and instantaneous water use efficiency (WUE_i) among irrigation treatments in 2006 while no significant differences were found in these parameters in 2007. Some leaf gas exchange parameters, e.g., T_r, and leaf temperature (T_L) have strong correlations with A_n and g. A_n and WUE were increased by 30–35% and 30–40%, respectively, at 600 μmol (CO₂) m⁻² s⁻¹ in comparison with 400 μmol (CO₂) m⁻² s⁻¹. Lint yield was strongly correlated with g, T_r, WUE, and soil moisture at 60 cm depth. Relative A_n, T_r, and T_L started to decrease from FTSW 0.3 at 60 cm and FTSW 0.2 at 40 cm. The results demonstrate that plant water status under limited irrigation management can be qualitatively monitored using the measures of soil moisture as well as leaf gas exchange, which in turn can be useful for describing yield reduction due to water deficit. We found that using normalized A_n, T_r, and T_L is feasible to quantify plant water deficit.     

Yield, water use efficiency and nitrogen uptake in potato: influence of drought stress

Summary A lysimeter experiment was performed to study the optimal allocation of limited water supply in potatoes. Irrigation regimes equal to 40, 60 and 80% of maximum evapotranspiration (ET) were evenly applied over the crop cycle. Other treatments involved withholding 80 mm of irrigation, based on ET, beginning at each of three designated growth stages (tuber initiation, early and late tuber growth). An irrigated control treatment, restoring the entire ET, was included for comparison. Continuous drought stress reduced photosynthesis as irrigation volumes were reduced. Plant biomass and tuber yield decreased almost proportionally to water consumption, so that WUE was roughly constant. N uptake was highest in the control and in 80% ET treatment. Withholding water during tuberisation severely hindered plant physiological processes and penalized tuber yield. Reductions in photosynthesis, total biomass and yield were the greatest when drought was imposed during tuber initiation. The earliest stress resulted in the lowest WUE and N uptake. A new crop water stress index (SI) was proposed, which combines atmospheric demand for water and canopy temperature.     

Effects of temperature and photoperiod on flowering time of forage legumes in a Mediterranean environment

Flowering time plasticity is a commonly occurring adaptive characteristic of fodder crops, including legumes, in arid and semiarid environments of the Mediterranean regions. Time of flowering is mainly influenced by genotype, temperature and photoperiod. Field experiments were carried out at Foggia (southern Italy) during successive growing seasons (from 8 to 16 growing cycles according to species) to study the relation among air temperature, photoperiod and duration of the morphological development of flowering in eight forage legume species: sulla (Hedysarum coronarium L.), sainfoin (Onobrychis viciifolia Scop.), pea (Pisum sativun L.), berseem clover (Trifolium alexandrinum L.), Persian clover (Trifolium resupinatum L.), faba bean (Vicia faba L.), common vetch (Vicia sativa L.) and hairy vetch (Vicia villosa Roth). Time to reach 10% flowering (EF) and 100% flowering (FF) were recorded. Rate of progress to flowering, defined as the inverse of time from sowing to EF and FF, was related to mean daily temperature, or to both mean daily temperature and mean photoperiod. Using the linear equations, the thermal time requirements (T_t) and the base temperature (T_b) expressed as heat units were determined by the x-intercept method for both EF and FF stages. Evaluation of flowering time was also based on days after planting (DAP), day of year (DOY) and on a photothermal index (PTI). For all species, a significant negative correlation (P ≥ 0.01) was found between planting date (PD) and DAP whereas PTI showed a significant negative relationship (P ≥ 0.05) only for faba bean, pea, berseem clover and common vetch. In sainfoin, sulla and berseem clover, the rate of progress to flowering was affected significantly (P ≥ 0.05) by both mean temperature and photoperiod. The T_t requirements to reach the EF and the FF stage ranged from 871 to 1665 °C day and from 1043 to 1616 °C day, respectively, for the studied species. Both phenological stages considered depended upon accumulated thermal time above a species-specific base temperature. Furthermore, in all legumes the onset of flowering only occurred when dual thresholds of a minimum T_t and a minimum photoperiod were reached, which were specific to each species.     

Modeling nutrient and water productivity of sorghum in smallholder farming systems in a semi-arid region of Ghana

The CERES-sorghum module of the Decision Support System for Agro-Technological Transfer (DSSAT) model was calibrated for sorghum (Sorghum bicolor (L.) Moench) using data from sorghum grown with adequate water and nitrogen and evaluated with data from several N rates trials in Navrongo, Ghana with an overall modified internal efficiency of 0.63. The use of mineral N fertilizer was found to be profitable with economically optimal rates of 40 and 80 kg N ha⁻¹ for more intensively managed homestead fields and less intensively managed bush fields respectively. Agronomic N use efficiency varied from 21 to 37 kg grain kg⁻¹ N for the homestead fields and from 15 to 49 kg grain kg⁻¹ N in the bush fields. Simulated grain yield for homestead fields at 40 kg N ha⁻¹ application was equal to yield for bush fields at 80 kg N ha⁻¹. Water use efficiency generally increased with increased mineral N rate and was greater for the homestead fields compared with the bush fields. Grain yield per unit of cumulative evapo-transpiration (simulated) was consistently higher compared with yield per unit of cumulative precipitation for the season, probably because of runoff and deep percolation. In the simulation experiment, grain yield variability was less with mineral N application and under higher soil fertility (organic matter) condition. Application of mineral N reduced variability in yield from a CV of 37 to 11% in the bush farm and from 17 to 7% in the homestead fields. The use of mineral fertilizer and encouraging practices that retain organic matter to the soil provide a more sustainable system for ensuring crop production and hence food security.