The effects of nitrogen and iron fertilization on growth,yield and fertilizer use efficiency of soybean in a Mediterranean-type soil

Poor seed yield of soybean in Mediterranean-type environments may result from insufficient iron (Fe) uptake and poor biological nitrogen (N) fixation due to high bicarbonate and pH in soils. This study was conducted to evaluate the effects of N and Fe fertilization on growth and yield of double cropped soybean (cv. SA 88, MG III) in a Mediterranean-type environment in Turkey during 2003 and 2004. The soil of the experimental plots was a Vertisol with 176 g CaCO₃ kg⁻¹ and pH 7.7 and 17 g organic matter kg⁻¹ soil. Soybean seeds were inoculated prior to planting with commercial peat inoculants. N fertilizer rates were 0, 40, 80, and 120 kg N ha⁻¹ of which half was applied before planting and the other half at full blooming stage (R2). Fe fertilizer rates were 0, 200 and 400 g Fe EDTA (5.5% Fe and 2% EDTA) ha⁻¹. It was sprayed as two equal portions at two trifoliate (V2) and at five trifoliate stages (V5). Plants were sampled at flower initiation (R1), at full pod (R4) and at full seed (R6) stages. Application of starter N increased biomass and leaf area index at R1 stage whereas Fe fertilization did not affect early growth parameters. N application continued to have a positive effect on growth parameters at later stages and on seed yield. Fe fertilization increased growth parameters at R4 and R6 stages, and final seed yield in both years. This study demonstrated an interactive effect of N and Fe fertilization on growth and yield of soybean in the soil having high bicarbonate and pH. There was a positive interaction between N and Fe at the N rates up to 80 kg N ha⁻¹. However, further increase in N rate produced a negative interaction. Fertilization of soybean with 80 kg N ha⁻¹ and 400 g Fe ha⁻¹ resulted in the highest seed yield in both years. We concluded that application of starter and top dressed N in combination with two split FeEDTA fertilization can be beneficial to improve early growth and final yield of inoculated soybean in Mediterranean-type soils.     

Improving crop yield and N uptake with long-term straw retention in two contrasting soil types

Retention and/or reincorporation of plant residues increases soil organic nitrogen (N) levels over the long-term is associated with increased crop yields. There is still uncertainty, however, about the interaction between crop residue (straw) retention and N fertilizer rates and sources. The objective of the study was to assess the influence of straw management (straw removed [S_Rem] and straw retained [S_Ret]), N fertilizer rate (0, 25, 50 and 75 kg N ha⁻¹) and N source (urea and polymer-coated urea [called ESN]) under conventional tillage on seed yield, straw yield, total N uptake in seed + straw and N balance sheet. Field experiments with barley monoculture (1983-1996), and wheat/barley-canola-triticale-pea rotation (1997-2009) were conducted on two contrasting soil types (Gray Luvisol [Typic Haplocryalf] loam soil at Breton; Black Chernozem [Albic Argicryoll] silty clay loam at Ellerslie) in north-central Alberta, Canada. On the average, S_Ret produced greater seed yield (by 205-220 kg ha⁻¹), straw yield (by 154-160 kg ha⁻¹) and total N uptake in seed + straw (by 5.2 kg N ha⁻¹) than S_Rem in almost all cases in both periods at Ellerslie, and only in the 1997-2009 period at Breton (by 102 kg seed ha⁻¹, 196 kg straw ha⁻¹ and by 3.7 kg N ha⁻¹) for both N sources. There was generally a considerable increase in seed yield, straw yield and total N uptake in seed + straw from applied N up to 75 kg N ha⁻¹ rate for both N sources at both sites and more so at Breton, but the response to applied N decreased with increasing N rate. The ESN was superior to urea in increasing seed yield (by 109 kg ha⁻¹), straw yield (by 80 kg ha⁻¹) and total N uptake in seed + straw (by 2.4 kg N ha⁻¹) in the 1983-1996 period at Breton (mainly at the 25 and 50 kg N ha⁻¹ rates). But, urea produced greater straw yield (by 95 kg ha⁻¹) and total N uptake in seed + straw (by 3.3 kg N ha⁻¹) than ESN in the 1983-1996 period at Ellerslie. The N balance sheets over the 1983-2009 study duration indicated large amounts of applied N unaccounted for (ranged from 740 to 1518 kg N ha⁻¹ at Breton and from 696 to 1334 kg N ha⁻¹ at Ellerslie), suggesting a great potential for N loss from the soil-plant system through denitrification and/or nitrate leaching, and from the soil mineral N pool by N immobilization. In conclusion, the findings suggest that long-term retention of crop residue may gradually improve soil productivity. The effectiveness of N source varied with soil type.     

Forage soybean performance in mediterranean environments

Livestock producers are interested in growing forage soybean [Glycine max (L.) Merr.] in summer and ensiling alone or in mixtures with corn or sorghum. Four row spacings (20, 40, 60, and 80 cm), four seeding rates (50, 100, 150, and 200 kg seeds per hectare) and four harvesting stages for forage production (V₅, R₂, R₄, and R₆) were evaluated under irrigated conditions in a randomized split–split plot design with three replications in three different locations in Turkey with Mediterranean-type climate in 2004 and 2005. Dry matter (DM) yield was significantly reduced with increased row spacings in all locations. There was no significant difference between 20, 40, or 60 cm row spacings while 80 cm provided the lowest yield. Increased seeding rates (50, 100, 150, and 200 kg seeds per hectare) generally increased DM yield, although the most suitable row spacing varied by location. DM yield was significantly affected by harvest maturity increasing with advancing maturity in all locations. DM constituent plant components were generally unaffected by row spacing and seeding rate but harvest maturity did significantly affect DM partitioning. As expected, leaf blade fractions decreased continually as plant maturity increased, while stem and flower plus pod fraction increased from V₅ to R₆. In general, row spacing and seeding rate did not significantly affect crude protein, degradable protein, and in vitro dry matter digestibility of soybean forage, but all decreased significantly with advancing maturity. These studies demonstrated soybeans managed for forage in a Mediterranean-type environment can average of 9.3 and 11.3 t ha⁻¹ dry matter yield at R₄ and R₆ stages, respectively, while averaging 13.3% crude protein, 8.2% degradable protein, and 60.6% in vitro dry matter digestibility.     

Timing and propane dose of broadcast flaming to control weed population influenced yield of sweet maize (Zea mays L. var. rugosa)

Farmers are interested to produce sweet maize under organic production systems and propane flaming could be a potential alternative tool for weed control in organic sweet maize production. Therefore, the objective of this study was to investigate the response of sweet maize to broadcast flaming as influenced by propane dose and crop growth stage. Field experiments were conducted at the Haskell Agricultural Laboratory of the University of Nebraska, Concord, NE in 2008 and 2009 using five propane doses applied at three different growth stages of V2 (2-leaf), V5 (5-leaf) and V7 (7-leaf). The propane doses were 0, 13, 24, 44 and 85 kg ha⁻¹. The response of sweet maize to propane flaming was evaluated in terms of visual crop injury, effects on plant height, yield components (plants m⁻², tillers plant⁻¹, number of ears plant⁻¹, cob length and number of seeds cob⁻¹) and fresh marketable yield. The response of different growth stages of sweet maize to propane doses was described by log-logistic models. Based on most parameters tested, V7 was the most tolerant while V2 was the least tolerant stage for broadcast flaming. The maximum yield reductions with the highest propane dose of 85 kg ha⁻¹ were 22%, 12% and 6% for V2, V5 and V7 stages, respectively. Furthermore, a 5% yield reduction was evident with 23, 25 and 36 kg ha⁻¹ of propane for V2, V5 and V7 growth stages, respectively, suggesting that plants flamed at V7 stage can tolerate higher dose of propane for the same yield reduction compared to the other growth stages. We believe that flaming has a potential to be used effectively in organic sweet maize production if properly used.     

Nitrogen applications modify seed and oil yields and fatty acid composition of winter mustard

Winter mustard (Brassica juncea L.) is not a common crop in the Southeastern United States. With increased interest in biodiesel production, there has been corresponding interest in mustard in this region. The objective of this study was to evaluate the effect of N fertilization (0, 50, 100, 150 kg N ha⁻¹) on productivity, oil content, and oil composition of winter mustard ‘Pacific Gold’ grown at three locations in Mississippi (Stoneville, and two locations at Verona, namely Verona silt loam (Verona-SL) and Verona clay (Verona-C)). Nitrogen did not affect oil content (percent oil). Seed and oil yields (kg ha⁻¹) increased with N application relative to the unfertilized control. At the Verona-C location, the concentration of oleic acid was higher in the 50 kg N ha⁻¹ treatment. At Stoneville, linolenic acid concentration was higher in the 150 kg N ha⁻¹ and lower in the 100 kg/N ha⁻¹ treatment, while it was not different in the other treatments. Overall, the yield of the fatty acids (FA) palmitic, palmitoleic, stearic, oleic, linoleic, linolenic, arachidic, eicosanoic, behenic, erucic, lignoceric, and nervonic acid increased with higher N rates (100 or 150 kg N/h). The highest yield of FA in the two Verona locations were achieved in the 100 kg N ha⁻¹, while greatest yield of FA at Stoneville was achieved in the highest N rate (150 kg N ha⁻¹). Means of mustard oil yields in our study in the higher fertility treatment ranged from 737 to 1094 kg ha⁻¹. This study demonstrated winter mustard production in Mississippi and possibly other areas in the Southeastern United States can be successful and could provide seed and oil yields comparable to yields from other production areas.     

Impact of organic manure and chemical fertilizers on artemisinin content and yield in Artemisia annua L

Artemisinin isolated from the aerial parts of Artemisia annua L. is a promising and potent antimalarial drug. It posses remarkable activity against both chloroquinine resistant as well as chloroquinine sensitive strains of Plasmodium falciparum. It is also useful in the treatment of cerebral malaria. The relatively low content of artemisinin in A. annua and unavailability of cost effective and viable synthetic protocol however, are major obstacles to the commercial production of the drug. The enhanced production of artemisinin is hence, highly desirable, which can be achieved by adequate and judicious supply of plant nutrients. The present experiment was therefore, designed to study the effect of organic manure (15 tonnes ha⁻¹) and chemical fertilizers (N₄₀₊₄₀, P₄₀, K₄₀, S₁₅₊₁₅ kg ha⁻¹; nitrogen, phosphorus, potassium and sulphur) on the accumulation of artemisinin and biomass in various plant parts through the developmental stages of A. annua L. Artemisinin yield (kg ha⁻¹) was also determined through the developmental stages of A. annua L. Artemisinin content and artemisinin yield of dried leaves were increased significantly at pre-flowering stage in the plants treated with NPKS (27.3% and 53.6%) and NPK (18.2% and 33.5%), respectively, when compared with control. Maximum dry yield of leaf ranging from 2596 to 3141 kg ha⁻¹ was observed at pre-flowering stage with various treatments.     

Pre and postemergence herbicides for weed control in castor crop

Weed management is among the main factors limiting cultivation of castor (Ricinus communis) in extensive fields, particularly when labor is scarce or expensive. This experiment evaluated the efficiency of weed management programs using preemergence (clomazone, pendimethalin, and trifluralin) and a postemergence herbicide (chlorimuron-ethyl) applied at 20 days after emergence in castor plants cv. BRS Energia under rainfed conditions in Apodi, Brazil. No phytotoxicity was observed on the castor plants, and the postemergence herbicide significantly increased castor seed yield to 1466 kg ha⁻¹ complementing the weed control of preemergence herbicides treatments in which seed yield was 1207 kg ha⁻¹. Seed yield on weedy and weed-free treatments was 760 and 1971 kg ha⁻¹, respectively. Weeds were kept under a satisfactory control up to 40 days after emergence. This program resulted in reasonable weed control because the preemergence herbicides controled monocotyledon weeds, while the postemergence herbicide controlled broad leafed species being selective to castor plants.     

Spectral measurements of the total aerial N and biomass dry weight in maize using a quadrilateral-view optic

Heterogeneous crop stands require locally adapted nitrogen fertilizer application based on rapid and precise measurements of the local crop nitrogen status. In the present study, we validated a promising technique for the latter, namely a tractor-mounted field spectrometer with an oblique quadrilateral-view measuring optic, measuring solar radiation and canopy reflectance in four directions simultaneously. Dry matter yield (kg ha⁻¹), total N content (g N g⁻¹ dry matter) and total aerial N (aboveground N-uptake) (kg N ha⁻¹) in maize were determined in 10 m² calibration areas in 60 plots differing in their N treatment and seeding density three times in each of three years under field conditions. Results show that the sensor used can reliably determine total aerial N ranging from as little as 5 kg N to 150 kg N ha⁻¹ with R²-values ≥0.81 in 2002 and 2004, and with R²-values ranging from ≥0.57 to 0.84 in 2003. Dry matter yields from as low as 0.3–4.2 t ha⁻¹ could be determined with R²-values ranging from 0.67 to 0.91 in 2002 to 2004. The capacity to ascertain DM yield spectrally was drastically reduced in the higher yield range (>6 t ha⁻¹) probably due to decreased sensitivity of the spectral signal. N-contents were generally not well determined. Taken together there is a good potential to determine reliably differences in total aerial N or DM yield from the five leaf stages unfolded to the five node stage where typically nitrogen applications are carried out.     

Effect of nitrogen rates on yield and quality of fennel (Foeniculum vulgare Mill.) accessions

Nitrogen rates and plant genotypes effects yield and quality of medicinal plants therefore, this experiment was conducted in order to determine the effects of nitrogen rates on fennel accessions quality and quantity. The experimental design was a split plot with nitrogen rate (0, 40, 80, 120 and 160 Kg N ha⁻¹) as main and accession (Isfahan, Tehran, Yazd and EU11486) as sub plots and replicated four times. The experiment was conducted at the Isfahan University of Technology Experimental Station, Isfahan, Iran during 2008-2009. Plant height, number of umbel per plant, 1000seed weight, number of seeds per umbel, seed yield, seed essential oil yield, seed and foliage essential oil contents and seed ash, protein and fiber contents were measured. Nitrogen fertilization increased all measured traits, but reduced ash content. On average, the highest seed and foliage essential contents and seed essential yield were produced at 160 kg per N ha⁻¹ and EU11486 was a superior cultivar for these traits. However, there was an interaction between N rate and accession on all traits. Isfahan (11.65 kg ha⁻¹), EU11486 (38.26 kg ha⁻¹), Tehran (15.32 kg ha⁻¹) and Yazd (22.06 kg ha⁻¹) produced the highest seed essential oil yield under application of 160, 80, 160 and 120 kg N ha⁻¹, respectively. Foliage of the accessions contained 0.45-0.91% essential oil and seeds of accessions contained 17.6-18.2% protein and 8.9-9.4% ash suggesting that foliage of fennel also is a good source of essential oil and seeds of fennel are good sources of protein and minerals. The results showed that N fertilization and accession can affect yield and quality of fennel and accessions responded differently to N fertilization rates, thus selection among the accessions and N rates for better fennel production is possible.     

Simulating water use and N response of winter wheat in the irrigated floodplains of Northwest Uzbekistan

The crop-soil simulation model CropSyst was used to simulate growth, water- and N-uptakes of irrigated winter wheat (Triticum aestivum L. cv. Kupava) in Khorezm, in the dry lands of northwest Uzbekistan, Central Asia. CropSyst was calibrated using the findings of field experiments of 2005/06 and 2006/07 and validated for the 2007/08 season. A relative root mean squared error of 11% proved the accuracy between simulated and observed aboveground biomass and grain yield in 2007/08. Scenario analyses showed that N-leaching was high and ranged from 63 to 106 kg ha⁻¹ when irrigated between 749 and 869 mm during the first two cropping seasons. The simulated N-leaching was lowest and ranged from 7 to 15 kg ha⁻¹ when irrigation was only 148–395 mm during 2007/08. The considerable N losses during leaching and high N-uptakes by wheat together resulted in a negative N-balance even during applications of 180 and 240 kg ha⁻¹ of N-fertilizer. N scarcity in the N-balance was reduced with increasing N-fertilizer amounts and ranged from −29 to −153 kg N ha⁻¹ in 2005/06 and 2006/07. Despite a common shallow groundwater table in the region during some time of the year, scenario analysis revealed that only full irrigation water (580 mm) and N supply according to crop demand (180 kg ha⁻¹) guaranteed high grain yields, unless the water table is permanently shallow to overcome irrigation deficits. Limited irrigation and N application (40% and 55% of ‘optimal’, respectively) in combination with a groundwater table below 3 m resulted in a 55% yield decline. The CropSyst wheat model proved a robust tool for assessing the influence of water and N dynamics under conditions of varying irrigation and shallow groundwater tables. It thus has potential as a decision support not only in northwest Uzbekistan, but also in comparable regions of Central Asia.     

Quantifying the yield gap in wheat-maize cropping systems of the Hebei Plain, China

Wheat-maize double cropping is the most important cropping system on the Hebei Plain and is one of the most important cropping systems in China. In a scenario of greater food demand, and increasing water and rural labour scarcity, it is critical that the annual productivity of the system is improved in water-energy-cost efficient and low carbon ways. Based on farm surveys, this paper benchmarked the performance of wheat-maize double crops on the Hebei Plain during the 2004-2005 season. These farm yields were assessed both against experimental yields collected from on-farm maximum yield trials conducted during the same 2004-2005 season and relative to simulated estimates of the climate-driven potential productivity of the region.The survey of 362 farms in six counties of the Hebei Plain during the 2004-2005 season found wheat yields ranging from 3375 kg ha⁻¹ to 9000 kg ha⁻¹ with an overall average yield of 6556 kg ha⁻¹. Maize yields averaged 7549 kg ha⁻¹ and ranged from 3375 kg ha⁻¹ to 11,250 kg ha⁻¹. The aggregate production for the wheat-maize double crops grown in the 2004-2005 season averaged 14,105 kg ha⁻¹ across the six counties. This was 72% of the average production (19,586 kg ha⁻¹) recorded from on-farm trials conducted in each of the six counties and 60% of the simulated average production potential (24,147 kg ha⁻¹) for the Hebei Plain in the 2004-2005 season. Thus, the annual productivity of the current cropping system could be increased with currently available technologies by 28%, while a yield increase of 42% is possible if farm yields approach the simulated yield potential.Based on farmer interviews and field observations, a number of real and perceived reasons for the current yield gaps in farmers’ fields were recognised. For instance, irrigation at stem-elongation of wheat is a current recommendation, yet only a proportion of the surveyed farmers were able to follow this strategy due to lack of access to shared irrigation facilities. Improving the region's infrastructure to enable more timely irrigation of crops will be a necessary prerequisite to improved productivity.The results from the farm surveys and on-farm trials indicate that, with current recommended practices, farmers can improve their annual farm productivity and close the current yield gaps. However, the survey identified that increasing system performance and efficiency will require a focus on both agronomic and socio-economic issues.     

Improving in-season nitrogen recommendations for maize using an active sensor

An active crop canopy reflectance sensor could be used to increase N-use efficiency in maize (Zea mays L.), if temporal and spatial variability in soil N availability and plant demand are adequately accounted for with an in-season N application. Our objective was to evaluate the success of using an active canopy sensor for developing maize N recommendations. This study was conducted in 21 farmers’ fields from 2007 to 2009, representing the maize production regions of east central and southeastern Pennsylvania, USA. Four blocks at each site included seven sidedress N rates (0–280 kg N ha⁻¹) and one at-planting N rate of 280 kg N ha⁻¹. Canopy reflectance in the 590 nm and 880 nm wavelengths, soil samples, chlorophyll meter (SPAD) measurements and above-ground biomass were collected at the 6th–7th-leaf growth stage (V6–V7). Relative amber normalized difference vegetative index (ANDVI_relative) and relative SPAD (SPAD_relative) were determined based on the relative measurements from the zero sidedress treatment to the 280 kg N ha⁻¹ at-planting treatment. Observations from the current study were compared to relationships between economic optimum N rate (EONR) and ANDVI_relative, presidedress NO₃ test (PSNT), or SPAD_relative that were developed from a previous study. These comparisons were based on an absolute mean difference (AMD) between observed EONR and the previously determined predicted relationships. The AMD for the relationship between EONR and ANDVI_relative in the current study was 46 kg N ha⁻¹. Neither the PSNT (AMD = 66 kg N ha⁻¹) nor the SPAD_relative (AMD = 72 kg N ha⁻¹) provided as good an indicator of EONR. When using all the observations from the two studies for the relationships between EONR and the various measurements, ANDVI_relative (R² = 0.65) provided a better estimate of EONR than PSNT (R² = 0.49) or SPAD_relative (not significant). Crop reflectance captured similar information as the PSNT and SPAD_relative, as reflected in strong relationships (R² > 0.60) among these variables. Crop canopy reflectance using an active sensor (i.e. ANDVI_relative) provided as good or better an indicator of EONR than PSNT or SPAD_relative, and provides an opportunity to easily adjust in-season N applications spatially.     

Forage soybean yield and quality response to water use

Forages could be used to diversify reduced and no-till dryland cropping systems from the traditional wheat (Triticum aestivum L.)-fallow system in the semiarid central Great Plains. Forages present an attractive alternative to grain and seed crops because of greater water use efficiency and less susceptibility to potentially devastating yield reductions due to severe water stress during critical growth stages. However, farmers need a simple tool to evaluate forage productivity under widely varying precipitation conditions. The objectives of this study were to (1) quantify the relationship between crop water use and dry matter (DM) yield for soybean (Glycine max L. Merrill), (2) evaluate changes in forage quality that occur as harvest date is delayed, and (3) determine the range and distribution of expected DM yields in the central Great Plains based on historical precipitation records. Forage soybean was grown under a line-source gradient irrigation system to impose a range of water availability conditions at Akron, CO. Dry matter production was linearly correlated with water use resulting in a production function slope of 21.2 kg ha⁻¹ mm⁻¹. The slope was much lower than previously reported for forage production functions for triticale (X Triticosecale Wittmack) and millet (Setaria italic L. Beauv.), and only slightly lower than slopes previously reported for corn (Zea mays L.) and pea (Pisum sativa L.) forage. Forage quality was relatively stable during the last four weeks of growth, with small declines in crude protein (CP) concentration. Values of CP concentration and relative feed value indicated that forage soybean was of sufficient quality to be used for dairy feed. A standard seed variety of maturity group VII was found to be similar (in both productivity and quality) to a variety designated as a forage type. The probability of obtaining a break-even yield of at least 4256 kg ha⁻¹ was 90% as determined from long-term precipitation records used with the production function. The average estimated DM yield was 5890 kg ha⁻¹ and ranged from 2437 to 9432 kg ha⁻¹. Regional estimates of mean forage soybean DM yield ranged from 4770 kg ha⁻¹ at Fort Morgan, CO to 6911 kg ha⁻¹ at Colby, KS. Forage soybean should be considered a viable alternative crop for dryland cropping systems in the central Great Plains.     

Forage soybean production for seed in mediterranean environments

Despite several experiments on row spacings and seeding rates of grain soybeans, limited information is available on the most suitable row spacing and seeding rate for tall and robust forage type soybeans grown for seed. The objectives of this study were to investigate seed yield, oil and protein content, and several morphological traits as affected by row spacing (20, 40, 60 and 80 cm) and seeding rate (330,000, 660,000, 990,000 and 1,320,000 seeds ha⁻¹) in tall and robust forage type soybeans in three irrigated Mediterranean environments in Turkey in a randomized split plot design with three replications in 2004 and 2005. Row spacings had no significant effect on plant height but tall and profusely branched plants developed in wide row spacing and light seeding conditions. Seed yield responded positively and linearly to row spacing up to 60 cm and then decreased slightly in all locations. Seed yield was the highest at 990,000 seeds ha⁻¹ seeding rate in all three locations (3072.5 kg ha⁻¹ in Bursa LSD = 214.7 kg ha⁻¹, 3295.1 kg ha⁻¹ in Mustafakemalpasa LSD = 298.6 kg ha⁻¹ and 3311.3 kg ha⁻¹ in Samsun LSD = 321.1 kg ha⁻¹). Averaged across years, locations, row spacings, and seeding rates the mean seed yield was an impressive 3013.4 kg ha⁻¹ compare with 3500.0 kg ha⁻¹ average seed yield of grain types. Crude protein and oil content of forage type soybean were not significantly affected by row spacings and seeding rates. It was concluded that forage type soybeans can be grown for multiple purposes at the 990,000 seeds ha⁻¹ seeding rate and 60 cm row spacings in Mediterranean environments.     

Relations of rice seeding rates to crop and weed growth in aerobic rice

Aerobic rice describes a management adaptation to reduced irrigation water supplies but, due to reduced intervals of flooding in this system, this requires revised weed management approaches to reduce costs and provide effective weed control. One approach is to make the crop more competitive and reduce the effects of weeds on the crop by using higher rice seeding rates. A study was conducted in the Philippines and India in 2008 and 2009 to assess the relations of seeding rates (15-125 kg ha⁻¹) of hybrid and inbred varieties to crop and weed growth in aerobic rice. Plant densities, tillers, and biomass of rice increased linearly with increased in seeding rates under both weedy and weed free environments. Weed biomass decreased linearly with increasing seeding rates from 15 to 125 kg ha⁻¹. Panicles and grain yields of rice in competition with weeds increased in a quadratic relation with increased seeding rates at both locations; however, the response was flat in the weed free plots. A quadratic model predicted that seeding rates of 48-80 kg ha⁻¹ for the inbred varieties and 47-67 kg ha⁻¹ for the hybrid varieties were needed to achieve maximum grain yield when grown in the absence of weeds, while rates of 95-125 kg seed ha⁻¹ for the inbred varieties and 83-92 kg seed ha⁻¹ for the hybrid varieties were needed to achieve maximum yields in competition with weeds. On the basis of these results, seeding rates greater than 80 kg ha⁻¹ are advisable where there are risks of severe weed competition. Such high seeding rates may be prohibitive when using expensive seed, and maximum yields are not the only consideration for developing recommendations for optimizing economic returns for farmers. Results of the present study do suggest however that increasing seeding rates of aerobic rice does suppress weed growth and reduce grain yield losses from weed competition. This information could be incorporated in integrated crop management packages to manage weeds more effectively.     

Irrigation and nitrogen scheduling as a requirement for optimising wheat yield and quality in Haryana, India

Wheat in Haryana (NW India) is grown as a winter crop in an annual sequence with rice, cotton, pearl millet or cluster bean as the main monsoon crops. Higher wheat yields in Haryana are associated with the use of modern varieties, increase in fertiliser use, improved irrigation practice and conservation tillage, and the recommendation to farmers for N fertiliser rates and timing and irrigation practice have an emphasis on optimising yield and input efficiencies. In India the importance to consumers of product quality does exist and, although the market place presently does not actively reward farmers for better quality wheat, the need for creating suitable and targeted marketing opportunities is now recognised. This paper examines aspects of input efficiencies and focuses on combinations of N-fertiliser and irrigation input in wheat crops grown with these four rotations (rice-wheat, cotton-wheat, pearl millet-wheat and cluster bean-wheat). Management practices that optimise grain production as well targeting grain that achieves best chapatti (Indian flat bread) quality are evaluated within a split-plot experiment where 4 irrigation schedule treatments were split with nitrogen management treatments involving a 2-way or 3-way split of N fertiliser. With the rice-wheat system, there were no differences between different split timings of N with grain yield, however with the 3 other wheat systems the 3 way split of N-fertiliser application, with N applied equally at N-fertiliser applied at seeding, early tillering and first node stage, always gave the highest yield. With all 4 rotations the highest protein level was achieved (range 11.8-12.5%) with this 3-way N application split. Grain yield increased in a step-wise manner as additional irrigation was implemented with all rotations and the highest protein outcomes were achieved with the least irrigations. The apparent recovery of N fertiliser applied was similar and highest with the 3-way split, and the 2-way split that did not include a basal N fertiliser application. Different rates of N fertiliser were included in separate experiments using the 3-way split of N application, and with the rice-wheat rotation the GreenSeeker instrument was used to establish the rate for the third application of N. The application of extra N-fertiliser with the non rice-wheat rotations produced no additional grain yield with an increase in the N-fertiliser input beyond 150 kg N ha⁻¹, although protein and N-content increased incrementally. Grain hardness and chapatti score trended higher with increases in N-fertiliser input but the increases were relatively small. The use of the GreenSeeker instrument with the rice-wheat rotation resulted in N saving of 21-25 kg N ha⁻¹ with similar grain yield, protein and grain hardness to that provided by using the recommended 150 kg N ha⁻¹. Where the GreenSeeker was used the apparent recovery was 70-75% compared with 60% with the wheat receiving the recommended 150 kg N ha⁻¹, suggesting farmers are likely to be over-fertilising their wheat crop. The best yields obtained in these experiments were about 5.5-6.0 t ha⁻¹ and these yields are consistent with a decade-long attainable yield identified for wheat in rice-wheat rotation for Haryana. If farmers can achieve market recognition for chapatti quality, and with the use of appropriate varieties, then farmers can assume that the best practice outlined here for optimising grain yield with integrated nutrient and soil management will be the same practice that optimises chapatti quality.     

Water and nitrogen balance of sweet sorghum (Sorghum bicolor moench (L.)) cv. Keller under semi-arid conditions

In the framework of the E.U. project Fair CT 96-1913 “Environmental studies on sweet and fibre sorghum, sustainable crops for biomass and energy”, a research has been carried out with the aim to study the water and nitrogen balance and determine the critical N dilution curve of sweet sorghum cv. Keller. A field experiment was performed, where three irrigation treatments (I₀ = dry control, I₅₀ = 50% ETm restoration, I₁₀₀ = 100% ETm restoration) and four nitrogen fertilization levels (N₀ = no nitrogen control, N₆₀ = 60 kg ha⁻¹, N₁₂₀ = 120 kg ha⁻¹; N₁₈₀ = 180 kg ha⁻¹) were studied. The final yield was significantly affected by the amount of water distributed but not by the nitrogen level. The treatments watered up to crop establishment (I₀) produced, in the average, 7.5 t ha⁻¹ of dry matter, against 21.1 and 27.1 t ha⁻¹ of I₅₀ and I₁₀₀, respectively. The crop determined a great reduction in nitrate concentration of soil water, irrespective of nitrogen supplied. The variation between N output and input (Δ) was negative in N₀, N₆₀ and N₁₂₀ and positive in N₁₈₀. The critical value of nitrogen uptake change in relation to the water availability. The amount of nitrogen supplied did not determine significant differences upon WUE. The crop seems to have a great potentiality in Mediterranean environment in terms of yield production.     

Dryland maize yields and water use efficiency in response to tillage/crop stubble and nutrient management practices in China

Rainfed crop production in northern China is constrained by low and variable rainfall. This study explored the effects of tillage/crop residue and nutrient management practices on maize (Zea mays L.) yield, water use efficiency (WUE), and N agronomic use efficiency (NAE) at Shouyang Dryland Farming Experimental Station in northern China during 2003–2008. The experiment was set-up using a split-plot design with 3 tillage/crop residue methods as main treatments: conventional, reduced (till with crop residue incorporated in fall but no-till in spring), and no-till (with crop residue mulching in fall). Sub-treatments were 3 NP fertilizer rates: 105–46, 179–78 and 210–92 kg N and P ha⁻¹. Maize grain yields were greatly influenced by the growing season rainfall and soil water contents at sowing. Mean grain yields over the 6-year period in response to tillage/crop residue treatments were 5604, 5347 and 5185 kg ha⁻¹, under reduced, no-till and conventional tillage, respectively. Grain yields under no-till, were generally higher (+19%) in dry years but lower (−7%) in wet years. Mean WUE was 13.7, 13.6 and 12.6 kg ha⁻¹ mm⁻¹ under reduced, no-till, and conventional tillage, respectively. The no-till treatment had 8–12% more water in the soil profiles than the conventional and reduced tillage treatments at sowing and harvest time. Grain yields, WUE and NAE were highest with the lowest NP fertilizer application rates (at 105 kg N and 46 kg P ha⁻¹) under reduced tillage, while yields and WUE tended to be higher with additional NP fertilizer rates under conventional tillage, however, there was no significant yield increase above the optimum fertilizer rate. In conclusion, maize grain yields, WUE and NAE were highest under reduced tillage at modest NP fertilizer application rates of 105 kg N and 46 kg P ha⁻¹. No-till increased soil water storage by 8–12% and improved WUE compared to conventional tillage, thus showing potentials for drought mitigation and economic use of fertilizers in drought-prone rainfed conditions in northern China.     

Biomass production and nitrogen accumulation and remobilisation by Miscanthus × giganteus as influenced by nitrogen stocks in belowground organs

The nitrogen (N) requirement of dedicated crops for bioenergy production is a particularly significant issue, since N fertilisers are energy-intensive to make and have environmental impacts on the local level (NO₃ leaching) and global level (N₂O gas emissions). Nitrogen nutrition of Miscanthus × giganteus aboveground organs is assumed to be dependent on N stocks in belowground organs, but the precise quantities involved are unknown. A kinetic study was carried out on the effect of harvest date (early harvest in October or late harvest in February) and nitrogen fertilisation (0 or 120 kg N ha⁻¹) on aboveground and belowground biomass production and N accumulation in established crops. Apparent N fluxes within the crop and their variability were also studied.Aboveground biomass varied between 24 and 28 t DM ha⁻¹ in early harvest treatments, and between 19 and 21 t DM ha⁻¹ in late harvest treatments. Nitrogen fertilisation had no effect on crop yield in late harvest treatments, but enhanced crop yield in early harvest treatments due to lower belowground biomass nitrogen content. Spring remobilisation, i.e. nitrogen flux from belowground to aboveground biomass, varied between 36 and 175 kg N ha⁻¹, due to the variability of initial belowground nitrogen stocks in the different treatments. Autumn remobilisation, i.e. nitrogen flux from aboveground to belowground organs, varied between 107 and 145 kg N ha⁻¹ in late harvest treatments, and between 39 and 93 kg N ha⁻¹ in early harvest treatments. Autumn remobilisation for a given harvest date was linked to aboveground nitrogen accumulation in the different treatments. Nitrogen accumulation in aboveground biomass was shown to be dependent firstly on initial belowground biomass nitrogen stocks and secondly on nitrogen uptake by the whole crop.The study demonstrated the key role of belowground nitrogen stocks on aboveground biomass nitrogen requirements. Early harvest depletes belowground nitrogen stocks and thus increases the need for nitrogen fertiliser.     

Effects of nitrogen rate on nitrate–nitrogen accumulation in forage kale and rape crops

Nitrogen fertilizer is applied to supplement soil nitrogen supply to maximize forage brassica crop dry-matter production. However, nitrogen fertilizer applications in excess of that required to maximize growth result in potentially toxic nitrate–nitrogen (NO₃–N) concentrations in grazeable plant tissues. Three experiments, two for forage kale at Lincoln (Canterbury) and one for forage rape at Hastings (Hawke's Bay) in New Zealand were grown under different rates of nitrogen (0–500 kg N ha⁻¹) to determine the effect of different rates of nitrogen on NO₃–N content of different plant parts of the crops. One of the kale experiments was grown with either full irrigation or no rain and no irrigation over summer, hereafter referred to as summer drought. The NO₃–N concentration on a whole plant (weighted average) basis increased from 0·1 mg g⁻¹ dry matter for the control plots to 2·30 mg g⁻¹ for the 500 kg N ha⁻¹ plots for forage kale. It increased from 0·99 for the control plots to 3·37 mg g⁻¹ for the 200 kg N ha⁻¹ plots for forage rape crops. However, NO₃–N concentration increased with N supply under the summer-drought plots from an average of 0·33 mg g⁻¹ when ≤120 kg N ha⁻¹ was applied to 2·30 mg g⁻¹ for the 240 kg N ha⁻¹ treatments but was unaffected by N supply under irrigation. The NO₃–N concentrations were higher in the stems and the petiole (which included the midrib of the leaf) than leaves in all three experiments. The NO₃–N concentration was highest at the bottom of the kale stem and decreased towards the top. We recommend N application rates based on soil tests results, and for conditions similar to the current studies up to 300 kg N ha⁻¹ under irrigation and adjusted lower N rates for regions prone to dry summers.