Effects of biochars derived from different feedstocks and pyrolysis temperatures on soil physical and hydraulic properties

Purpose

Biochar addition to soils potentially affects various soil properties, and these effects are dependent on biochars derived from different feedstock materials and pyrolysis processes. The objective of this study was to investigate the effects of amendment of different biochars on soil physical and hydraulic properties.

Materials and methods

Biochars were produced with dairy manure and woodchip at temperatures of 300, 500, and 700 °C, respectively. Each biochar was mixed at 5 % (w/w) with a forest soil, and the mixture was incubated for 180 days, during which soil physical and hydraulic properties were measured.

Results and discussion

Results showed that the biochar addition significantly enhanced the formation of soil macroaggregates at the early incubation time. The biochar application significantly reduced soil bulk density, increased the amount of soil organic matter, and stimulated microbial activity at the early incubation stage. Saturated hydraulic conductivities of the soil with biochars, especially produced at high pyrolysis temperature, were higher than those without biochars on the sampling days. The treatments with woodchip biochars resulted in higher saturated hydraulic conductivities than the dairy manure biochar treatments. Biochar applications improved water retention capacity, with stronger effects by biochars produced at higher pyrolysis temperatures. At the same suction, the soil with woodchip biochars possessed higher water content than that with the dairy manure biochars.

Conclusions

Biochar addition significantly affected the soil physical and hydraulic properties. The effects were different with biochars derived from different feedstock materials and pyrolysis temperatures.     

The potential feasibility for soil improvement, based on the properties of biochars pyrolyzed from different feedstocks

Purpose

Biochars have been considered as useful soil amendments due to their beneficial properties in improving soil fertility, carbon (C) sequestration, and soil decontamination. In our study, a series of biochars produced from different types of feedstocks at two pyrolysis temperatures (300 and 500 °C) were characterized to evaluate their different potentials as soil amendments.

Materials and methods

Ten types of feedstocks were used to prepare biochars at the pyrolysis temperatures of 300 and 500 °C, for 2 h. Chemical and physical analyses, X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared (FTIR) analyses were conducted to determine differences in biochar properties. Then, soil incubation studies were used to investigate the relationships between these biochar properties and their different ameliorant values in soil.

Results and discussion

The pH, ash, total C, total potassium, total phosphorus, total base cation concentrations, surface areas, and total pore volumes of biochars produced at 500 °C were higher than at 300 °C, while the reverse applied for yields, total oxygen and total hydrogen, and average pore widths and particle sizes. Cluster analysis suggested that biochars derived from similar feedstock types belonged in the same category. The SEM, XRD, and FTIR analyses of typical biochars from the different categories suggested both variations and similarities in their characteristics. In addition, the results from soil incubation experiments were consistent with the conclusions made from biochar characteristics analysis.

Conclusions

Biochars derived from swine manures, fruit peels, and leaves with high pH and macro-nutrients appeared appropriate to increase soil pH and soil nutrient availability; whereas, biochars from wetland plant residues with high C concentrations and Brunauer–Emmett–Teller were better for soil C sequestration and contaminant adsorption.     

Retention and release of diethyl phthalate in biochar-amended vegetable garden soils

Purpose

Diethyl phthalate (DEP) is one of the most commonly used plasticizers as well as a soil contaminant. Using biochar to remediate soils contaminated with DEP can potentially reduce the bioavailability of DEP and improve soil properties. Therefore, a laboratory study was conducted to evaluate the effect of biochar on soil adsorption and desorption of DEP.

Materials and methods

Two surface soils (0–20 cm) with contrasting organic carbon (OC) contents were collected from a vegetable garden. Biochars were derived from bamboo (BB) and rice straw (SB) that were pyrolyzed at 350 and 650 °C. Biochars were added to two types of soil at rates of 0.1 and 0.5 % (w/w). A batch equilibration method was used to measure DEP adsorption-desorption in biochar treated and untreated soils at 25 °C. The adsorption and desorption isotherms of DEP in the soils with or without biochar were evaluated using the Freundlich model.

Results and discussion

The biochar treatments significantly enhanced the soil adsorption of DEP. Compared to the untreated low organic matter soil, the soils treated with 0.5 % 650BB increased the adsorption by more than 19,000 times. For the straw biochar treated soils, the increase of DEP adsorption followed the order 350SB?>?650SB. However, for the bamboo biochars, the order was 650BB?>?350BB. Bamboo biochars were more effective than the straw biochars in improving soils’ adsorption capacity and reducing the desorption ability of DEP.

Conclusions

Adding biochar to soil can significantly enhance soil’s adsorption capacity on DEP. The 650BB amended soil showed the highest adsorption capacity for DEP. The native soil OC contents had significant effects on the soils’ sorption capacity treated with 650BB, whereas they had negligible effects on the other biochar treatments. The sorption capacity was affected by many factors such as the feedstock materials and pyrolysis temperature of biochars, the pH value of biochar, and the soil organic carbon levels.     

Biochar-induced changes in soil properties affected immobilization/mobilization of metals/metalloids in contaminated soils

Purpose

Remediation of metal contaminated soil with biochar is attracting extensive interest in recent years. Understanding the significance of variable biochar properties and soil types helps elucidating the meticulous roles of biochar in immobilizing/mobilizing metals/metalloids in contaminated soils.

Materials and methods

Six biochars were produced from widely available agricultural wastes (i.e., soybean stover, peanut shells and pine needles) at two pyrolysis temperatures of 300 and 700 °C, respectively. The Pb-, Cu-, and Sb-contaminated shooting range soils and Pb-, Zn-, and As-contaminated agricultural soils were amended with the produced biochars. The mobility of metals/metalloids was assessed by the standard batch leaching test, principal component analysis and speciation modeling.

Results and discussion

The changes in soil properties were correlated to feedstock types and pyrolysis temperatures of biochars based on the principal component analysis. Biochars produced at 300 °C were more efficient in decreasing Pb and Cu mobility (>93 %) in alkaline shooting range soil via surface complexation with carboxyl groups and Fe-/Al-minerals of biochars as well as metal-phosphates precipitation. By contrast, biochars produced at 700 °C outperformed their counterparts in decreasing Pb and Zn mobility (100 %) in acidic agricultural soil by metal-hydroxides precipitation due to biochar-induced pH increase. However, Sb and As mobility in both soils was unfavorably increased by biochar amendment, possibly due to the enhanced electrostatic repulsion and competition with phosphate.

Conclusions

It is noteworthy that the application of biochars is not equally effective in immobilizing metals or mobilizing metalloids in different soils. We should apply biochar to multi-metal contaminated soil with great caution and tailor biochar production for achieving desired outcome and avoiding adverse impact on soil ecosystem.

     

Biochars immobilize soil cadmium, but do not improve growth of emergent wetland species Juncus subsecundus in cadmium-contaminated soil

Purpose

An addition of biochar mixed into the substrate of constructed wetlands may alleviate toxicity of metals such as cadmium (Cd) to emergent wetland plants, leading to a better performance in terms of pollutant removal from wastewater. The objective of this study was to investigate the impact of biochars on soil Cd immobilization and phytoavailability, growth of plants, and Cd concentration, accumulation, and translocation in plant tissues in Cd-contaminated soils under waterlogged conditions.

Materials and methods

A glasshouse experiment was conducted to investigate the effect of biochars derived from different organic sources (pyrolysis of oil mallee plants or wheat chaff at 550 °C) with varied application amounts (0, 0.5, and 5 % w/w) on mitigating Cd (0, 10, and 50 mg kg^?1) toxicity to Juncus subsecundus under waterlogged soil condition. Soil pH and CaCl₂/EDTA-extractable soil Cd were determined before and after plant growth. Plant shoot number and height were monitored during the experiment. The total root length and dry weight of aboveground and belowground tissues were recorded. The concentration of Cd in plant tissues was determined.

Results and discussion

After 3 weeks of soil incubation, pH increased and CaCl₂-extractable Cd decreased significantly with biochar additions. After 9 weeks of plant growth, biochar additions significantly increased soil pH and electrical conductivity and reduced CaCl₂-extractable Cd. EDTA-extractable soil Cd significantly decreased with biochar additions (except for oil mallee biochar at the low application rate) in the high-Cd treatment, but not in the low-Cd treatment. Growth and biomass significantly decreased with Cd additions, and biochar additions did not significantly improve plant growth regardless of biochar type or application rate. The concentration, accumulation, and translocation of Cd in plants were significantly influenced by the interaction of Cd and biochar treatments. The addition of biochars reduced Cd accumulation, but less so Cd translocation in plants, at least in the low-Cd-contaminated soils.

Conclusions

Biochars immobilized soil Cd, but did not improve growth of the emergent wetland plant species at the early growth stage, probably due to the interaction between biochars and waterlogged environment. Further study is needed to elucidate the underlying mechanisms.     

Biochars influence sweet‐potato yield and nutrient uptake in tropical Papua New Guinea

Currently, the biomass of an invasive and obnoxious weed, kunai grass (Imperata cylindrica), is uncontrollably burnt in Papua New Guinea in subsistence farming systems resulting in unwarranted negative environmental consequences. We explored the possibility of sustainable utilization of biochar produced from the weed biomass along with a standard feedstock‐rice husk (Oryza sativa). Biochars were produced with lab‐scale pyrolysis at 550°C, characterized for chemical properties and plant nutrient composition. Further, agronomic efficacy of soil incorporation of biochars (5 t ha^?1) or co‐applied with mineral fertilizers (100, 11, and 62 kg ha^?1 N, P, K, respectively) was tested for sweet potato (Ipomoea batatas L. Lam) in a field experiment. The two biochars differed significantly (P < 5%) with respect to recovery from the feedstocks, chemical characters and nutrient composition. Kunai grass biochar was poorer in nutrients (< 1%) with distinctly alkaline pH and higher electrical conductivity. Biochar amendment to soil showed significant (P < 5%) improvement of soil moisture, while co‐application of biochars along with mineral fertilizers showed soil moisture decrease. Biochar amendment improved the growth parameters and total tuber yield of sweet potato by about 20%, while co‐application with mineral fertilizers augmented total tuber yield by 100% and above‐ground biomass yields by > 75%. Besides, improving agronomic performance of sweet potato crop, co‐application of biochars with mineral fertilizers enhanced uptake of N, P, K, Ca, Mg, and S. Production and utilization of biochar in sweet‐potato production could offer an efficient means of disposing biomass of kunai grass with concomitant productivity improvement in Papua New Guinea.     

A rapid-test for screening biochar effects on seed germination

We developed a rapid-test to screen for effects of biochar on seed germination and soils. Crop seeds were placed in containers and covered with 15 g of soil with 1% biochar by weight. Two agricultural soils from South Carolina USA were used. Eighteen biochars were produced from six primary feedstocks [pine chips (PC), poultry litter (PL), swine solids (SS), switchgrass (SG); and two blends of PC and PL, 50% PC/50% PL (55), and 80% PC/20% PL (82)]. Each feedstock was pyrolyzed at 350, 500 and 700°C. There were few biochar effects on seed germination. Shoot dry weight was increased for carrot, cucumber, lettuce, oat, and tomato; primarily with biochars containing PL. Soil pH, electrical conductivity and extractable phosphorus primarily increased with PL, SS, 55, and 82 treatments for both soil types and across species. This method can be an early indicator of biochar effects on seed germination and soil health.     

Effect of low energy-consuming biochars in combination with nitrate fertilizer on soil acidity amelioration and maize growth

Purpose

We evaluated the ameliorative effects of crop straw biochars either alone or in combination with nitrate fertilizer on soil acidity and maize growth.

Materials and methods

Low energy-consuming biochars were prepared from canola and peanut straws at 400 °C for 2 h. Incubation experiment was conducted to determine application rate of biochars. Afterward, maize crop was grown in pots for 85 days to investigate the effects of 1 % biochars combined with nitrate fertilizer on soil pH, exchangeable acidity, and maize growth in an Ultisol collected from Guangdong Province, China.

Results and discussion

Application of 0.5, 1.0, and 1.5 % either canola straw biochar (CSB) or peanut straw biochar (PSB) increased soil pH by 0.15, 0.27, 0.34, and 0.30, 0.58, 0.83 U, respectively, after 65-day incubation. Soil pH was increased by 0.49, 0.72, 0.78, and 0.88 U when 1 % CSB or PSB was applied in combination with 100 and 200 mg N/kg of nitrate, respectively, after maize harvest in greenhouse pot experiment. These low-cost biochars when applied alone or in combination with nitrate not only reduced soil exchangeable acidity, but also increased Ca²⁺, Mg²⁺, K⁺, Na⁺, and base saturation degree of the soil. A total of 49.91 and 80.58 % decreases in exchangeable acidity were observed when 1 % CSB and PSB were incubated with the soil for 65 days, compared to pot experiment where 71.35, 78.64, 80.2, and 81.77 % reductions of exchangeable acidity were observed when 1 % CSB and PSB were applied in combination with 100 and 200 mg N/kg of nitrate, respectively. The higher contents of base cations (Ca²⁺, Mg²⁺, K⁺, Na⁺) in biochars also influenced the plant growth. The higher biomass in CSB-treated pots was attributed to the higher K content compared to PSB. The higher percent reduction in exchangeable Al³⁺ by applying 1 % CSB combined with 200 mg N/kg of nitrate consistently produced maximum biomass (129.65 g/pot) compared to 100 mg N/kg of nitrate and 1 % PSB combined with 100 and 200 mg N/kg of nitrate. The exchangeable Al³⁺ mainly responsible for exchangeable acidity was decreased with the application of biochars and nitrate fertilizer. A highly significant negative relationship was observed between soil exchangeable Al³⁺ and plant biomass (r ²?=?0.88, P?<?0.05).

Conclusions

The biochars in combination with nitrate fertilizer are cost-effective options to effectively reduce soil acidity and improve crop growth on sustainable basis.

     

Effects of Soil Application of Different Biochars on Selected Soil Chemical Properties

An incubation study was conducted to determine if biochars created using different feedstocks and under different reactor conditions would differentially influence specific soil chemical properties. A Nicollet surface soil (fine-loamy, mixed, superactive, mesic Aquic Hapludoll) was mixed with 17 different biochars and a nitrogen fertilizer (urea). The biochars were created with different feedstocks and different reactor conditions. Soil tests for total nitrogen (N), total organic carbon (C), ammonium N (NH₄ ⁺-N), and nitrate N (NO₃ ^?-N) were run. Results show that the feedstock used to create the biochar influenced how it affected the specific soil chemical properties measured. Results also suggest that the conditions within the reactor influence how the biochar will affect the soil chemical properties measured.     

The importance of biochar quality and pyrolysis yield for soil carbon sequestration in practice

Biochar is a carbon (C)-rich material produced from biomass by anoxic or oxygen-limited thermal treatment known as pyrolysis. Despite substantial gaseous losses of C during pyrolysis, incorporating biochar in soil has been suggested as an effective long-term option to sequester CO₂ for climate change mitigation, due to the intrinsic stability of biochar C. However, no universally applicable approach that combines biochar quality and pyrolysis yield into an overall metric of C sequestration efficiency has been suggested yet. To ensure safe environmental use of biochar in agricultural soils, the International Biochar Initiative and the European Biochar Certificate have developed guidelines on biochar quality. In both guidelines, the hydrogen-to-organic C (H/C_org) ratio is an important quality criterion widely used as a proxy of biochar stability, which has been recognized also in the new EU regulation 2021/2088. Here, we evaluate the biochar C sequestration efficiency from published data that comply with the biochar quality criteria in the above guidelines, which may regulate future large-scale field application in practice. The sequestration efficiency is calculated from the fraction of biochar C remaining in soil after 100 years (F_perm) and the C-yield of various feedstocks pyrolyzed at different temperatures. Both parameters are expressed as a function of H/C_org. Combining these two metrics is relevant for assessing the mitigation potential of the biochar economy. We find that the C sequestration efficiency for stable biochar is in the range of 25%–50% of feedstock C. It depends on the type of feedstock and is in general a non-linear function of H/C_org. We suggest that for plant-based feedstock, biochar production that achieves H/C_org of 0.38–0.44, corresponding to pyrolysis temperatures of 500–550°C, is the most efficient in terms of soil carbon sequestration. Such biochars reveal an average sequestration efficiency of 41.4% (±4.5%) over 100 years.     

Bioavailability of Cd and Zn in soils treated with biochars derived from tobacco stalk and dead pigs

Purpose

Previous studies show that application of biochar can reduce the bioavailability of heavy metals in soil. A plant growth experiment was carried out to evaluate the effect of tobacco stalk- and dead pig-derived biochars on the extractability and redistribution of cadmium (Cd) and zinc (Zn) in contaminated soil, and the impact on tobacco (Nicotiana tabacum L.) plant growth.

Materials and methods

The top 20 cm of a soil contaminated with Cd and Zn was used in this study. Biochars derived from tobacco stalk and dead pig were applied to the soil at four application rates (0, 1, 2.5, and 5 %), and tobacco plants were grown. After 80-days growth, the pH, electrical conductivity (EC), CaCl₂-extractable heavy metals and fractions of heavy metals in soil samples, as well as the plant biomass and the concentrations of heavy metals in the plant were determined.

Results and discussion

The plant growth experiment demonstrated that tobacco stalk biochar and dead pig biochar significantly (P?<?0.05) increased the pH, but had no significant effect on the electrical conductivity (EC) of the soil. The CaCl₂-extractable Cd and Zn content decreased as the application rates increased. The concentration of extractable Cd and Zn decreased by 64.2 and 94.9 %, respectively, for the tobacco stalk biochar treatment, and 45.8 and 61.8 %, respectively, for the dead pig biochar treatment at 5 % application rate. After biochar addition, the exchangeable Cd was mainly transformed to fractions bound to carbonates and Fe-Mn oxides, while the Zn was immobilized mainly in the fraction bound to Fe-Mn oxides. Tobacco stalk biochar increased the tobacco plant biomass by 30.3 and 36.2 % for shoot and root, respectively at the 5 % application rate. Dead pig biochar increased the tobacco plant biomass by 43.5 and 40.9 % for shoot and root, respectively, at the 2.5 % application rate. Both biochars significantly (P?<?0.05) decreased the Cd and Zn accumulation by tobacco plant.

Conclusions

As a soil amendment, tobacco stalk biochar was more effective at removing Cd, whereas dead pig biochar was more effective at removing Zn, and a higher application rate was more effective than a lower application rate. Overall, biochar derived from tobacco stalk was more effective, than dead pig biochar, at remediating soil contaminated with Cd and Zn, as well as promoting tobacco growth.

     

不同来源生物质废弃物热解炭化农业应用潜力分析:生物质炭产率、性质及促生效应

  【目的】  中国农业生物质废弃物种类多、数量大,且存在病原菌、农药和抗生素残留等潜在生态和环境风险。热解炭化作为一种废弃物的安全处理方法,其生物质炭的循环得率、性质及其土壤改良和促进作物生长的效应还需系统的比较研究。  【方法】  本研究选取作物生产来源的原生生物质、养殖业来源的次生生物质、食品加工处理的残余生物质等共26种生物质废弃物原料,在同一条件下炭化,分析不同来源原料热解后生物质炭产出率与性质。以小白菜 (Brassica campestris L. ssp.) 为试材进行盆栽试验,研究生物质炭对作物生长及土壤改良效应,进而评估这些废弃物炭化农业循环的应用潜力。  【结果】  供试26种废弃物炭化后的生物质炭产出率介于22%～71%,有机碳循环回收率介于22%～81%,氮素循环回收率介于21%～67%。26种废弃物生物质炭的pH和阳离子交换量差异较小 (变异系数10%左右),总有机碳、氮、水分、灰分含量等差异较大,变异系数在60%～70%;而不同原料生物质炭的电导率和溶解性有机碳含量变化极大,变异系数大于90%。生物质炭盆栽试验中,生物炭添加1%,小白菜生物量提升效应介于–34%～314%,变异系数大于100%;小白菜品质提升效应介于–14%～228%,变异系数为59%;土壤肥力提升效应介于20%～360%,特别是土壤有效磷含量提升幅度在0～24倍,均值为359%。同时,生物质炭产出率与生物质炭中灰分呈显著正相关,生物质炭的碳氮回收率与原料中碳氮含量呈显著正相关;不同原料热解炭化的质量回收率、碳氮回收率与小白菜产量及品质等指标间变化差异较大,在小白菜产量效应和品质效应间,部分生物质炭存在抵消作用,而另一部分生物质炭表现为协同作用。  【结论】  综合考虑热解炭化的生物质炭化循环率及碳氮回收循环率和土壤质量–植物生长协同提升效应,供试26种原料中,蚕砂、稻壳牛粪、骨粉、双孢菇渣、兔粪、羊粪和玉米渣的炭化循环率和土壤质量–植物生长协同提升幅度较高 (> 50%),为优先炭化农业利用的生物质废弃物;而木糖渣、稻壳粉、椰渣、高粱酒渣、核桃皮、蚓粪和红茶渣等废弃物热解炭化,因炭化循环率较低,或者土壤质量–植物生长提升的不一致效应,认为不宜炭化农业利用;而其余废弃物热解炭化后的效应介于上述两类之间,具有较高的炭化循环率和一定程度的土壤质量–植物生长协同提升效应,属于可炭化农业利用的生物质废弃物。     

Taxon-specific responses of soil microbial communities to different soil priming effects induced by addition of plant residues and their biochars

Purpose

This work investigated changes in priming effects and the taxonomy of soil microbial communities after being amended with plant feedstock and its corresponding biochar.

Materials and methods

A soil incubation was conducted for 180 days to monitor the mineralization and evolution of soil-primed C after addition of maize and its biochar pyrolysed at 450 °C. Responses of individual microbial taxa were identified and compared using the next-generation sequencing method.

Results and discussion

Cumulative CO₂ showed similar trends but different magnitudes in soil supplied with feedstock and its biochar. Feedstock addition resulted in a positive priming effect of 1999 mg C kg^?1 soil (+253.7 %) while biochar gave negative primed C of ?872.1 mg C kg^?1 soil (?254.3 %). Linear relationships between mineralized material and mineralized soil C were detected. Most priming occurred in the first 15 days, indicating co-metabolism. Differences in priming may be explained by differences in properties of plant material, especially the water-extractable organic C. Predominant phyla were affiliated to Acidobacteria, Actinobacteria, Chloroflexi, Gemmatimonadetes, Firmicutes, Planctomycetes, Proteobacteria, Verrucomicrobia, Ascomycota, Basidiomycota, Blastocladiomycota, Chytridiomycota, Zygomycota, Euryarchaeota, and Thaumarchaeota during decomposition. Cluster analysis resulted in separate phylogenetic grouping of feedstock and biochar. Bacteria (Acidobacteria, Firmicutes, Gemmatimonadetes, Planctomycetes), fungi (Ascomycota), and archaea (Euryarchaeota) were closely correlated to primed soil C (R ²?=??0.98, ?0.99, 0.84, 0.81, 0.91, and 0.91, respectively).

Conclusions

Quality of plant materials (especially labile C) shifted microbial community (specific microbial taxa) responses, resulting in a distinctive priming intensity, giving a better understanding of the functional role of soil microbial community as an important driver of priming effect.

     

Influence of nitrogen fertilizer forms and crop straw biochars on soil exchange properties and maize growth on an acidic Ultisol

Effects of repeated application of urea (UN) and calcium nitrate (CN) singly and together with crop straw biochars on soil acidity and maize growth were investigated with greenhouse pot experiments for two consecutive seasons. Canola straw biochar (CB), peanut straw biochar (PB) and wheat straw biochar (WB) were applied at 1% of dried soil weight in the first season. N fertilizers were applied at 200 mg N kg^?1. In UN treatments, an initial rise in pH was subjected to proton consumption through urea hydrolysis, afterwards nitrification of NH₄⁺ caused drastic reductions in pH as single UN had soil pH of 3.70, even lower than control (4.27) after the 2nd crop season. Post-harvest soil analyses indicated that soil pH, soil exchangeable acidity, NH₄⁺, NO₃^? and total base cations showed highly significant variation under N and biochar types (P < 0.05). Articulated growth of plants under combined application with biochars was expressed by 22.7%, 22.5%, and 35.7% higher root and 25.6%, 23.8%, and 35.9% higher shoot biomass by CB, PB and WB combined with CN over UN, respectively. Therefore, CN combined with biochars is a better choice to correct soil acidity and improve maize growth than UN combined with biochars.     

Straw amendment to paddy soil stimulates denitrification but biochar amendment promotes anaerobic ammonia oxidation

Purpose

Organic matter amendment is usually used to improve soil physicochemical properties and to sequester carbon for counteracting climate change. There is no doubt that such amendment will change microbial activity and soil nitrogen transformation processes. However, the effects of straw and biochar amendment on anammox and denitrification activity and on community structure in paddy soil are unclear.

Materials and methods

We conducted a 30-day pot experiment using rice straw and rice straw biochar to deepen our understanding about the activity, microbial abundance, and community structure associated with soil nitrogen cycling during rice growth.

Results and discussion

Regarding activity, anammox contributed 3.1–8.1% of N₂ production and denitrification contributed 91.9–96.9% of N₂ production; straw amendment resulted in the highest denitrification rate (38.9 nmol N g^?1 h^?1), while biochar amendment resulted in the highest anammox rate (1.60 nmol N g^?1 h^?1). Both straw and biochar amendments significantly increased the hzsB and nosZ gene abundance (p < 0.05). Straw amendment showed the highest nosZ gene abundance, while biochar amendment showed the highest hzsB gene abundance. Phylogenetic analysis of the anammox bacteria 16S rRNA genes indicated that Candidatus Brocadia and Kuenenia were the dominant genera detected in all treatments.

Conclusions

Straw and biochar amendments have different influences on anaerobic ammonia oxidation and denitrification within paddy soil. Our results suggested that the changes in denitrification and anammox rates in the biochar and straw treatments were mainly linked to functional gene abundance rather than microbial community structure and that denitrification played the more major role in N₂ production in paddy soil.

     

An in-situ Technique for Producing Low-Cost Agricultural Biochar

Application of biochar to agricultural soils is effective to sequester atmospheric carbon and improve soil quality, but current pyrolysis and transportation costs are high, making biochar too costly to be used at the field scale. This study developed a new in-situ technique, burning and soil covering(B-SC), which can be used by farmers for production of biochar with crop residue. In this study,the air-dried feedstocks, elephant grass and corn residue, were burnt in situ for biochar production in the field. After approximately 90% of the leaves were combusted, the burning process was dramatically slowed down by covering the feedstock with soil. The biochar yield averaged 18.0 ± 1.3(n = 15) and 13.7 ± 1.3(n = 10) kg per 100 kg air-dried feedstock for the elephant grass and corn residue,respectively. The biochar properties were suitable for soil improvement. The inputs for biochar production of the B-SC process only included low labor force, open field, feedstock(e.g., grass and crop residue), and simple tools. The operation time for processing 10 kg of the corn residue by an individual farmer was 24.4 ± 4.1 min(n = 10). As compared with the conventional field burning process, the B-SC process drastically shortened the time for biomass burning and generated a significantly lower emission of smoke and thermal energy. This simple technique can be particularly practical and effective for farmers to improve the soils of poor quality in China.     

Effect of biochar soil-amendments on Allium porrum growth and arbuscular mycorrhizal fungus colonization

Application of biochar to soil to achieve any number of goals should also consider unintended effects upon soil biology, including symbioses such as arbuscular mycorrhizas. We conducted an experiment to examine the interaction of biochar addition and arbuscular mycorrhizal (AM) fungus inoculation upon growth and phosphorus (P) uptake by Allium porrum L. and relate these responses to physicochemical properties of the biochars. A. porrum seedlings were grown with and without Glomus intraradices Schenck & Smith, and either without biochar or in the presence of one of 12 different biochars created by pyrolysis of three biomass feedstocks. Fast pyrolysis biochars greatly reduced colonization of roots by the AM fungus. Among biochars produced by a given pyrolysis method, higher surface areas were accompanied by higher AM fungus colonization. These findings are pertinent in selecting biochars for application to agricultural soils for such purposes as inactivation of pathogenic bacteria while being mindful of potential impacts upon the AM symbiosis.     

Steam activation of biochars facilitates kinetics and pH-resilience of sulfamethazine sorption

Purpose

Sulfamethazine (SMT) is increasingly detected in environmental matrices due to its versatile use as antibiotics. We aimed to investigate the benefits and roles of steam activation of biochars with respect to SMT sorption kinetics and equilibrium sorption.

Materials and methods

Biochars were produced from burcucumber plant and tea waste using a pyrolyzer at a temperature of 700 °C for 2 h. The biochar samples were treated with 5 mL min^?1 of steam for an additional 45 min for post-synthesis steam activation. The SMT sorption on the unmodified and steam activated biochars were compared.

Results and discussion

The time taken to reach equilibrium was significantly less for steam activated biochars (～4 h) than non-activated biochars (>24 h). Up to 98 % of SMT could be removed from aqueous solutions by steam activated biochars. The sorption kinetic behaviors were well described by the pseudo-second model and SMT sorption rates of steam activated biochars (k ₂?～?1.11–1.57 mg g^?1 min^?1) were significantly higher than that of the unmodified biochars (k ₂?～?0.04–0.11 mg g^?1 min^?1) because of increased availability of accessible porous structure with averagely larger pore diameters. Moreover, the equilibrium sorption on the unmodified biochars was significantly influenced by increasing solution pH (～30–50 % reduction) because of speciation change of SMT, whereas steam activated biochars manifested much stronger sorption resilience against pH variation (～2–4 % reduction only) because the enhanced porosity offset the effect of unfavorable electrostatic repulsion.

Conclusions

The observed features of steam activated biochars would render their applications more versatile and reliable in field throughout changeable environmental conditions.

     

Effects of biochar and fertilizer management on sunflower (Helianthus annuus L.) feedstock and soil properties

The need for bioenergy is increasing with increase in global energy demand, and sustainable soil and fertilizer management practices for bioenergy feedstock production are gaining importance. In this greenhouse study, we evaluated the effects of biochar and fertilizer nitrogen on soil and energy crop sunflower (Helianthus annuus L. var. Giganteus). Sunflower plants were treated with three rates of biochar, control (0 Mg ha^?1), low (25 Mg ha^?1) and high (50 Mg ha^?1), and three rates of fertilizers, 0% (control), 50% (low) and 100% (high) of the recommended nitrogen dose. Plant height, quality (chlorophyll content), biomass yield, feedstock energy, ash content and tissue nutrients were measured along with soil moisture and pH. Results showed an 11% increase in mean plant height under low biochar compared to control biochar-treated plants. High nitrogen treatment produced 26% and 18% more stalk and total above-ground plant (whole plant) biomass, respectively, compared to the control nitrogen treatment. High biochar treatment resulted in higher soil moisture holding, but lower soil pH than the control biochar treatment. Plant quality, energy and ash contents were not affected by either biochar or nitrogen. The plant tissue analysis provides a complete tissue macro- and micronutrient information on sunflower cultivar Giganteus, which was not done previously.     

Influence of Biochar Addition on the Denitrification Process and N<Subscript>2</Subscript>O Emission in Cd-Contaminated Soil

The aim of this study was to investigate the effect of biochar addition on the denitrification process and N₂O emission in Cd-contaminated soil. Four different biochars, i.e., dairy manure and rice straw pyrolyzed at 350 and 550 °C, respectively, were added into a Cd-contaminated soil and incubation experiments were conducted for 8 weeks. Results showed that Cd had an inhibitory effect on denitrifying reductase enzymes and reduced the abundance of functional genes. On the contrary, amendment with the biochars increased denitrifying enzyme activity and gene abundance, and thus, enhanced the denitrification process. Labile carbon (C) in the biochar-amended soil, which was calculated based on the two-pool exponential model, was the key factor to facilitate this process. As a less important factor, elevated soil pH by biochar addition also increased denitrifying activity as well as the nosZ abundance. Decrease of Cd bioavailability by the biochar addition was beneficial to the denitrification process. Addition of the biochars with higher amount of NO₃ ^?-N, especially the rice straw-derived biochars, increased cumulative N₂O emission by more than ten times relative to the Cd-contaminated soil. With the great amount of labile C and NO₃ ^?-N, the treatment of biochars prepared at 350 °C released the larger amount of CO₂ and N₂O than other treatments. The biochar addition could totally release the heavy metal stress and restore the Cd-contaminated soil in terms of bacterial community.