Use of an osteoconductive compound as an aid in the management of a maxillary fracture in a boa constrictor

A boa constrictor was presented with a short oblique compound fracture of the rostral third of the right maxilla. The fracture was reduced and biomaterial was placed around the fracture. A computed tomography scan at 1.5 mo post-surgery showed that the fracture had healed with slight displacement of the bone fragments.     

Use of a double-hook plate to repair a subtrochanteric femoral fracture in an immature dog

A subtrochanteric femoral fracture in a 5-month-old Doberman Pinscher was repaired by use of a 5-hole, 3.5-mm, double-hook plate. The double-hook plate afforded rigid 3-point fixation of the short proximal metaphyseal segment without impingement of the proximal femoral physis and allowed compression of the fracture fragments by placement of an interfragmentary screw through its pendulum hole. The fracture healed without complications, and the dog had a rapid return to function. Although designed for use in performing femoral osteotomies in dogs afflicted with hip dysplasia, the double-hook plate can be used to repair fractures with short proximal or distal segments.     

Repair of an Ulnar Fracture With Radial Luxation in a Horse

An ulnar fracture with radial luxation (Monteggia fracture) was repaired in a horse. Reduction of the radial luxation was difficult, requiring 2 incisions, limb traction, neuromuscular blockade, and direct radial manipulation. The ulnar fracture was repaired by use of a dynamic compression plate. Three months postoperatively, the horse was free of any apparent lameness.     

Repair of an open radial fracture in an adult horse

An open radial fracture in an adult horse (450 kg) was repaired by internal fixation, using two 18-hole 4.5-mm broad dynamic compression plates and 5.5- and 4.5-mm bone screws. The fracture healed completely, but when evaluated 9 months after surgery, the horse was lame on the fractured limb at a trot. Local infiltration of anesthesia along the distal half of the bone plates greatly ameliorated the lameness, suggesting that the plates were irritating the soft tissues and extensor tendons along the cranial and lateral aspects of the antebrachium. Both bone plates were removed simultaneously with no complications, and the horse became sound.     

Primary anconeal fracture in a boxer

A 14-month-old speyed female Boxer was presented with acute non-weight-bearing lameness in the right forelimb. Radiography revealed separation of the anconeal process, which was thence surgically removed. Histological examination of the anconeal process confirmed a primary fracture. Isolated unilateral anconeal process fracture in the dog is rare and this report includes histopathological findings of a primary anconeal fracture.     

Osteochondral lesion and cranial cruciate ligament rupture in an immature dog stifle

An osteochondral flap was present on the medial femoral condyle of a stifle of a six-month-old female rottweiler in which there was also a ruptured cranial cruciate ligament. The lesion was probably osteochondritis dissecans, but the possibilities of it being secondary to joint in-stability or a subchondral fracture, as has been described in people with knee ligamentous injuries, are discussed.     

Treatment of methicillin-resistant Staphylococcus epidermidis infection following repair of an ulnar fracture and humeroradial joint luxation in a horse

A 27-month-old Rocky Mountain Horse was examined because of a fracture of the proximal portion of the ulna and luxation of the humeroradial joint (Monteggia fracture). Open reduction was performed, using a mechanical distractor, and the ulnar fracture was stabilized by application of a bone plate and screws. After surgery, the horse developed an infection of the surgical site, and bacterial culture of fluid from the surgical site yielded a pure growth of methicillin-resistant Staphylococcus epidermidis susceptible to oxytetracycline, erythromycin, rifampin, and vancomycin. Treatment with oxytetracycline did not result in a favorable clinical response. Therefore, the horse was treated systemically with vancomycin and rifampin, and vancomycin-impregnated polymethyl methacrylate beads were implanted at the surgical site. Six months after surgery, the horse was sound at a walk or trot, and bony union was evident on radiographs of the elbow joint.     

Treatment of incisive bone fracture in a horse using an acrylic splint

A ventrally displaced incisive bone fracture was diagnosed in a 3-year-old Andalusian stallion. Symptoms included swelling of the lips, dysphagia and ptyalism. External manipulation revealed pain and crepitus in the gingival region of the rostral maxilla. An intraoral examination revealed upper gingival haematomas, misalignment and malocclusion of the incisors (prognathism). A radiograph of the rostral maxilla confirmed ventrally displaced bilateral fractures of the incisive portion of the maxilla rostral to the canine teeth (Triadan 104/204). The fracture was reduced under general anaesthesia. A methylmethacrylate intraoral splint was used to stabilise the fracture. Post operative radiographs confirmed the fracture reduction. Post operative clinical control confirmed the correct position of the splint. No complications were encountered in the post operative period and good stabilisation was obtained. The splint was removed 60 days post operatively. The use of an acrylic intraoral splint successfully stabilised a bilateral, ventrally displaced incisive bone fracture. Normal occlusion was obtained. The use of an acrylic splint may represent a relatively simple, inexpensive and noninvasive technique for the repair of incisive bone fractures rostral to canine teeth in horses.     

Fracture repair of the distal portion of the radius by use of a condylar screw implant in an adult horse.

An 8-year-old American Quarter Horse gelding was evaluated because of an open fracture involving the left radius. The horse had fallen during training and became immediately non-weight-bearing in the left forelimb. On initial evaluation, the horse was unable to bear weight on that limb; radiography revealed a long oblique fracture of the distal metaphysis of the radius with minimal displacement of the fracture fragments. Because of the configuration of the fracture, we recommended surgical intervention with internal fixation. A condylar screw implant and 4.5-mm broad dynamic compression plate were applied to the medial and dorsolateral aspects of the radius, respectively. The horse recovered in a sling and full-limb bandage. Six months after discharge, the horse was reevaluated because of a grade 4/5 lameness in the same limb. Palpation revealed signs of severe pain over the distomedial aspect of the radius. Radiography of the left radius revealed severe osteolysis beneath the distal aspect of the condylar screw implant. Surgical removal of the medial plate was performed. Sixteen months after the initial fracture repair, the horse had returned to light training without signs of lameness. Removal of the dorsal plate may be indicated if this horse is to return to aggressive training or becomes lame in the left forelimb.     

Internal fixation of a fractured axis in an adult horse

Objective: To report internal fixation of a fractured axis with a dynamic compression plate (DCP). Study Design: Case report. Animals: A 7‐year‐old Warmblood gelding. Method: Surgery was performed under anesthesia in sternal recumbency. After fracture reduction the complete transverse fracture in the cranial third of the axis was stabilized with a 7‐hole 4.5 mm DCP. Optimal positioning of the plate and the length of the screws were facilitated by fluoroscopy. Recovery from anesthesia was supervised in a pool. Results: The horse had an excellent outcome and returned to its previous activity level. Conclusion: Surgical treatment with fracture reduction and plate fixation enables normal bearing of the head and neck and improves neck flexibility soon after surgery.     

Vertebral fracture, extensor hypertonia of thoracic limbs, and paralysis of pelvic limbs (Schiff-Sherrington syndrome) in an Arabian foal

An Arabian foal, which was recumbent for 4 days, had signs of extensor rigidity of the thoracic limbs and hypotonic paralysis of the pelvic limbs. Survey radiography revealed a lesion at T15, with radiographic impression of a compression fracture or a hemivertebra. Postmortem examination revealed a fracture at T15. Clinical and pathologic findings in this case were compatible with the Schiff-Sherrington syndrome, which is characterized by thoracic limb extensor hypertonia associated with paraplegia from acute thoracolumbar trauma.     

Comparison of computer-assisted surgery with conventional technique for the treatment of axial distal phalanx fractures in horses: an in vitro study

OBJECTIVES: To compare the precision obtained with computer-assisted screw insertion for treatment of mid-sagittal articular fractures of the distal phalanx (P3) with results achieved with a conventional technique. STUDY DESIGN: In vitro experimental study. SAMPLE POPULATION: Thirty-two cadaveric equine limbs. METHODS: Four groups of 8 limbs were studied. Either 1 or 2 screws were inserted perpendicular to an imaginary axial fracture of P3 using computer-assisted surgery (CAS) or conventional technique. Screw insertion time, predetermined screw length, inserted screw length, fit of the screw, and errors in placement were recorded. RESULTS: CAS technique took 15-20 minutes longer but resulted in greater precision of screw length and placement compared with the conventional technique. CONCLUSION: Improved precision in screw insertion with CAS makes insertion of 2 screws possible for repair of mid-sagittal P3 fractures. CLINICAL RELEVANCE: CAS although expensive improves precision in screw insertion into P3 and consequently should yield improved clinical outcome.     

Distal Humeral Salter Harris (Type II) Fracture Repair by an Ulnar Osteotomy Approach in a Horse

Objectives: To report repair of a comminuted distal humeral type II Salter–Harris fracture using an ulnar osteotomy approach and locking compression plates (LCP). Study Design: Case report. Animal: A 3‐month‐old Standardbred filly with a type II Salter–Harris fracture of the distal humerus. Methods: Radiographic and computed tomography examinations were performed to assist surgical planning. The distal humeral fracture was approached by an ulnar osteotomy and repaired using a 7‐hole broad LCP and screws inserted in lag fashion. The osteotomy was subsequently repaired using a 7‐hole narrow LCP. Results: The distal humeral fracture was successfully approached and stabilized by an ulnar osteotomy approach. At 6‐month follow‐up, the filly was ambulating comfortably with a normal cosmetic appearance. Conclusions: An ulnar osteotomy approach was readily performed and allowed for repair of a type II Salter–Harris fracture of the distal humerus. Clinical Relevance: The equine distal humerus can be accessed readily using an ulnar osteotomy approach. LCPs allow for repair of complicated fractures that have previously been associated with a grave prognosis.     

Reattachment of tooth fragment: an in vitro study

Canine tooth fracture is common in dogs. Application of an esthetic and durable restoration may be challenging in veterinary dental practice. This study used traditional human dental laboratory methods to evaluate fracture strength of intact dog canine teeth and fractured teeth that had been restored by reattachment of the tooth fragment. The results showed that the teeth restored by reattachment of the tooth fragment supported a test load equal to 45.4 % of the load necessary to fracture intact canine teeth.     

Surgical correction of temporomandibular joint ankylosis in two cats

Two cats with temporomandibular joint ankylosis were examined. Difficulty in opening the mouth and malocclusion were associated with trauma and fracture around the zygomatic arch and the condyle of the mandible after an automobile accident. Unilateral condylectomy or aggressive caudal mandibulectomy was performed to improve quality of life. Excision arthroplasty of the temporomandibular joint improved mandibular function and appearance. Some malocclusion remained but had no clinical significance.     

Computed tomographic documentation of a comminuted fourth carpal bone fracture associated with carpal instability treated by partial carpal arthrodesis in an Arabian filly

OBJECTIVE: To report treatment of a unilateral comminuted fourth carpal bone (C4) fracture associated with carpal instability by partial carpal arthrodesis (PCA) of the middle carpal joint (MCJ) and carpometacarpal joint (CMCJ). STUDY DESIGN: Case Report. ANIMALS: An 8-month-old Arabian filly. METHODS: A C4 slab fracture was diagnosed radiographically; however, fracture comminution was conclusively diagnosed after computed tomographic (CT) imaging. PCA of the MCJ and CMCJ was performed with 2 narrow dynamic compression plates. RESULTS: PCA provided appropriate carpal stability and correct limb alignment immediately after surgery. Complete bony fusion with substantial carpal flexion and no lameness at walk or light trot was observed 8 months after surgery. CONCLUSIONS: Carpal CT was successfully used to define fracture configuration after standard radiographic examination failed to delineate comminution. PCA was selected because of joint instability and lateral carpal collapse of MCJ and CMCJ and can be successfully used to treat comminuted C4 slab fractures associated with carpal instability. Moderate MCJ osteoarthritis without radiocarpal joint involvement allows pain-free, substantial carpal flexion and thus, return to low-level pleasure riding may be possible. CLINICAL RELEVANCE: CT imaging may more adequately characterize traumatic carpal bone injury, particularly, when carpal bone fracture configuration cannot be determined on standard radiographs. Early PCA of the MCJ and CMCJ is an useful alternative to treat comminuted C4 slab fractures that cannot be reconstructed.     

Use of a circular external skeletal fixator for stabilization of a comminuted diaphyseal metatarsal fracture in an alpaca

CASE DESCRIPTION: A 3-year-old male alpaca was evaluated because of non-weight-bearing lameness (grade 5/5) in the left hind limb. CLINICAL FINDINGS: Clinical and radiographic examination revealed a closed, comminuted, nonarticular, displaced diaphyseal fracture of the left third and fourth metatarsal bones. TREATMENT AND OUTCOME: Initial attempts at treatment via reduction of the fracture under traction and subsequent application of a cast were unsuccessful, and more stable fracture fixation was pursued. The alpaca underwent closed reduction of the fracture, which was stabilized by the application of a 3-ring circular external skeletal fixator (CESF). Improved weight bearing on the affected limb was evident soon after surgery and gradually increased; full weight bearing was evident by the seventh day after discharge from the hospital (day 20 after application of the CESF). Lameness was hardly noticeable during walking at that time. After 3 months, complete fracture healing was evident and the CESF was removed; mild outward rotation of the distal fragment and metatarsophalangeal joint was present. A Robert Jones bandage was applied to the limb, and the alpaca was kept in a stall for another 4 weeks. Eleven months after CESF application, the owners and referring veterinarian reported that the alpaca was healthy, not lame, and serving as a stallion without apparent impediment. CLINICAL RELEVANCE: Although mostly restricted to small animals, application of a CESF can be a viable alternative for management of long bone fractures in South American camelids.     

Influence of an interdental full pin on stability of an acrylic external fixator for rostral mandibular fractures in dogs

OBJECTIVE: To determine total stiffness and gap stiffness of an external fixation system in a canine mandibular fracture gap model incorporating a full interdental pin as the only point of rostral fixation in a bilateral type-I external fixator. SAMPLE POPULATION: 10 canine mandibles. PROCEDURE: Bilateral mandibular ostectomies were performed between premolars 3 and 4. A type-I external fixator incorporating a full interdental pin was placed to stabilize a 0.5-cm fracture gap. Four pin configurations (intact mandibular bodies with fixator; ostectomized mandibular bodies and complete fixator; ostectomized mandibular bodies with caudal pins of rostral fragment cut; ostectomized mandibular bodies with all pins of rostral fragment cut) were tested in dorsoventral bending 5 times on each mandible. The full interdental pin remained intact in all configurations. Total stiffness and gap stiffness were determined for each configuration on a materials testing machine. RESULTS: Total stiffness of intact mandibles was significantly greater than that of ostectomized mandibles, regardless of external fixator configuration. However, total stiffness and gap stiffness were not significantly different among different external fixator configurations applied to ostectomized mandibles. CONCLUSION AND CLINICAL RELEVANCE: External fixator configurations with only the full interdental pin engaging the rostral fragment were as stiff as configurations that had 2 or 4 additional pins in the rostral fragment for the applied loads. External fixators for rostral mandibular fractures may be rigidly secured with rostral fragment implants applied extracortically, avoiding iatrogenic trauma to teeth and tooth roots.     

Arthroscopic removal of an intra-articular screw causing joint impingement after distal femoral fracture repair in a dog

The use of lag screws to treat femoral condyle fractures is common, and their placement in surgery is technically demanding. Intra-articular screw impingement is a serious complication that may occur during surgical treatment of femoral condyle fractures. Here, we describe the case of a 3-year-old 40-kg dog which experienced recurrent lameness 6 mo after successful surgical treatment of a comminuted medial femoral condyle fracture due to an intra-articular non-loosening screw causing joint impingement. Removal of the conflicting screw was performed arthroscopically, based on its ability to offer minimally invasive access to the stifle joint. Six months after removal of the screw, the dog had full recovery without limitations to range of motion or stifle pain. To our knowledge, this is the first report on the use of arthroscopy to remove an intra-articular screw causing joint impingement after distal femoral fracture repair in a dog.     

Femoral Fracture Repair Using a Locking Plate Technique in an Adult Captive Polar Bear (Ursus Maritimus)

Objective— To report successful femoral fracture repair in a polar bear. Study Design— Case report. Animals— Female polar bear (Ursus maritimus) 5 years and ～250 kg. Methods— A closed, complete, comminuted fracture of the distal midshaft femur was successfully reduced and stabilized using a compression plating technique with 2 specialized human femur plates offering axial, rotational, and bending support, and allowing the bone to share loads with the implant. Postoperative radiographs were obtained at 11.5 weeks, 11 months, and 24 months. Results— Bone healing characterized by marked periosteal reaction was evident at 11 months with extensive remodeling evident at 24 months. No complications were noted. Conclusions— Distal mid shaft femoral fracture was reduced, stabilized, and healed in an adult polar bear with a locking plate technique using 2 plates. Clinical Relevance— Previously, femoral fractures in polar bears were considered irreparable. Use of 2 plates applied with a locking plate technique can result in successful fracture repair despite large body weight and inability to restrict postoperative activity.