Investigation on flow and heat transfer characteristics in capillary porous wick based on alkali metal thermal-to-electric converter (AMTEC)

An axial symmetric invariable temperature phase change interface model of capillary porous wick based on alkali metal thermal-to-electric converter (AMTEC) is established to simulate flow and heat transfer characteristics in capillary porous wick and liquid channel by solving the mass and heat transport controlling equations. The effects of the working fluid flow rate, inlet temperature, porous wick thickness, porosity and effective pore diameter on the distributions of pressure, velocity and temperature are analyzed. In addition, the available effective pore size of the porous wick and the measures to improve the performance of the porous wick are given by analyzing the relationship between the maximum available capillary pressure and the loop pressure drop. The results show that the model presented in gives a good agreement with the three dimensional two-phase evaporation model. The flow and heat transfer characteristics of the capillary porous wick with the alkali metal liquid as working fluid are different from that with the traditional working fluid in some ways.     

Frequency tracking method and simulation for coriolismass flowmter based on a new adaptive notch filter

In order to improve the long-playing frequency tracking ability in the signal processing for coriolis mass flowmeter (CMF) , a new IIR adaptive notch filter (ANF) is developed via steiglitz-mcBride method (SMM) and applied to filter the sensor output signal whose frequency, amplitude and phase are time-varying following the random walk model. The proposed method can detect the signal frequency fleetly and track the frequency variations continuously. The tracking performances of the proposed method and the adaptive lattice notch filter (LANF) method are investigated with computer simulations. Simulations demonstrate the superiority of the proposed method and show it has advantages of fast convergence rate, insensitivity to initial phase variations, and higher long-playing tracking stability and accuracy than LANF method.     

江淮地区双层拱架塑料大棚通风效果CFD 仿真与分析

近年来,双层拱架塑料大棚在江淮地区应运而生,但该类棚型未定,棚内生产小气候问题亟待进一步研究。介绍了双层拱架塑料大棚的应用和研究进展,使用AutoCAD和ProE建立了双层拱架的三维模型,再通过ANSYS ICEM CFD软件将三维模型简化为2-D模型并进行结构化网格划分。针对双层拱架塑料大棚的通风效果分别进行贯流式通风和单面通风的数值模拟分析,结果显示：贯流式通风时内棚和保温层温度分布均匀,并带走棚内热量,有利于双层棚的结构稳定性,能够保证明显的通风效果;单面通风时从内棚进口处开始向另一面,温度呈现阶梯递增形式,最高温度达329 K,最大温差达29 K,保温层温度较均匀、变化不大。因此,采用贯流式通风有利于双层棚的通风效果。仿真与分析结果为双层拱架塑料大棚的实际应用和研究提供理论参考。     

Simulation Modeling and Simulation Analysis for the Boiler Attached to 360 MW Unit

Using modular simulation technique,a mathematical model for the combustion and air/gas system of the W shape flame boiler is presented.The experimental resulats show that.The dynamic process accords with the mechanism process of the object.     

农产品空气能热泵烘房温度场的数值模拟与验证

农产品热泵烘房温度场均匀性是影响农产品干燥品质的重要因素。本文选用5HGR-35型农产品热泵烘房,通过交互式CAD/CAM系统(UG)软件建立热泵烘房3D模型,运用理论分析与计算流体动力学(Computational fluid dynamics,CFD)模拟相结合的方法,研究其内部温度场分布情况,对现有结构烘房的温度场建模模拟,分析模拟结果并对现有结构进行优化。通过模拟得出结论:送风速度越大,烘房内热空气更新越快,换热效果越好。综合温度场分布以及农产品烘干要求,烘房内合理的送风速度为11 m/s左右;在11 m/s风速下,烘房空载时在15 min左右达到设定温度(65℃);小推车设计高度加大300~310 mm烘房内部温度场更均匀;烘房顶部均匀加入3块长×宽×高=2900 mm×20 mm×300 mm的挡板,可以使烘房内部温度场更均匀;小推车与烘房之间及相互之间保持30 mm左右间隙摆放更有利于烘房内部温度场的分布;验证试验中,模拟温度与实测温度吻合性良好。上述结论对烘房的进一步优化设计具有一定的指导意义。     

Theoretical Analysis on 13-Bit Lattice Gas Automata Model with Poly-velocity and its Simulation

An 13 bit lattice gas automata model has been investigated from fluid discrete dynamics. By gaining the moment equations from lattice Boltzmann equation and using Chapman Enskog expansion, the fluid dynamics equation and energy equation of 13 bit lattice gas automata model with polyvelocity have been deduced. The validity of the model using for non isothermal fluid dynamics has been proved . Finally, simulation results for non isothermal flow pass plate have been shown     

Analysis and Research on VVT System Control Strategy for Motorcycle Engine

An original variable valve timing mechanism with two-mode intake timing parameters is developed according to the structural characteristics of small-medium displacement motorcycle engine. Based on cycle simulation, a cycle simulation model of VVT mechanism for motorcycle engine is created. The control strategy of variable valve timing and lifting running-model are carried out at idle speed low negative load, middle negative load, low speed high negative load and high speed high negative load. It has been proved that the performance of JH125 motorcycle engine can be effectively improved by loading the new type VVT system.     

The effect of transfers of alien genes for leaf rust resistance on the agronomic and quality characteristics of wheat

Summary Nine transfers of leaf rust (Puccinia recondita Rob. ex Desm.) resistance to wheat (Triticum aestivum L.) from Agropyron elongatum Host. Beauv., Triticum speltoides Tausch and rye (Secale cereale L.) were backcrossed up to 10 times to commercial wheat cultivars. The objective was to study the effect of the transfers on agronomic and quality characters and to make them available in desirable genetic backgrounds. The results varied greatly for different transfers. In four cases no promising material was obtained even after nine backcrosses. However, for the remaining five transfers material with potential as a new cultivar was obtained.