Radial mechanical properties of high-temperature dried Norway spruce (Picea abies) wood

Abstract

Wood drying experiments were conducted in which the temperature and the drying rate were controlled independently. The mechanical properties of dried wood in radial loading were analysed in relation to drying parameters. Mass loss, due to thermal degradation of the wood structural components, occurred predominantly in slow high-temperature drying processes. Despite the higher mass loss, slowly dried wood showed similar radial strength and stiffness to rapidly dried wood. The formation of irreversible hydrogen bonds (hornification) within the wood structure may compete with the effects of mass loss on the radial mechanical behaviour of wood. However, both the mass loss and the hornification resulted in wood specimens with lower hygroscopicity. Application of slow high-temperature drying to reduce microscopic cell-wall damage, caused by anisotropic shrinkage of cell-wall layers, did not seem to affect the radial mechanical properties of wood. The effects of stress relaxation within the wood cell wall on the mechanical behaviour of wood may be offset by the degradation of structural components along with drying. Radial mechanical properties may be improved by rapid high-temperature drying up to high final dryness.     

Liquid water absorption in uncoated Norway spruce (Picea abies) claddings as affected by origin and wood properties

Abstract

Uncoated Norway spruce specimens from different spatial positions within stems from two origins with different growth conditions were exposed to liquid water over a prolonged time, and apparent diffusion coefficients and rates of void filling were calculated from sorption curves. Both apparent diffusion and rate of void filling were significantly affected by origin and by the difference between inner and outer boards. The differences between inner and outer boards were explained by heartwood proportion and density, but some effects of origin remained when these properties were accounted for. The apparent diffusion coefficient was reduced by increasing density, and increased by increasing heartwood proportion. Void filling rate was reduced by both increasing density and increasing heartwood proportion. Since the effect of heartwood proportion was more pronounced in the material from the highly productive area, it may have been confounded with properties of juvenile wood.     

Polyamines in embryogenic cultures of Norway spruce (Picea abies) and red spruce (Picea rubens)

Embryogenic cultures of red spruce (Picea rubens Sarg.) and Norway spruce (Picea abies (L.) Karst.) were initiated from dissected mature zygotic embryos. The tissues were grown on either proliferation medium or maturation medium. On proliferation medium, the embryogenic tissue continued to produce early stage somatic embryos (organized meristems attached to elongated, suspensor-like cells), whereas on maturation medium fully mature embryos developed from the embryonic tissue. Analysis of polyamines in tissues grown on these two media showed that: (1) both putrescine and spermidine concentrations were always higher in cultures grown on proliferation medium than in cultures grown on maturation medium; (2) in both species, spermidine concentrations declined with time in the tissues grown on maturation medium; and (3) spermine was present in only minute quantities and showed only a small change with time. The presence of difluoromethylornithine in the culture medium had little effect on polyamine concentration, whereas the presence of difluoromethylarginine caused a decrease in putrescine concentrations in both red spruce and Norway spruce tissues grown on proliferation medium or maturation medium.     

Micromechanical properties of common yew (Taxus baccata) and Norway spruce (Picea abies) transition wood fibers subjected to longitudinal tension

The longitudinal modulus of elasticity of common yew is astonishingly low in light of its high raw density. At least this was found for specimens examined at the solid wood level and at the tissue level. However, to reveal if this low axial stiffness is also present at the cellular level, tensile tests were performed on individual yew fibers and on spruce fibers for reference. The results revealed a low stiffness and a high strain to fracture for yew when compared with spruce. This compliant behavior was ascribed to a relatively high microfibril angle of yew measured by X-ray scattering. It can be concluded that the high compliance of yew observed at higher hierarchical levels is obviously controlled by a structural feature present at the cell wall level. In future studies, the biomechanical function of this compliant behavior for the living yew tree would be of particular interest.     

Bromination of different morphological parts of spruce wood (Picea abies)

Summary It has been found that the lignin in a middle lamella fraction isolated by a sieving technique has the same reactivity to bromine as the whole wood lignin. A plataue value of 1 mole bromine/mole C₉-unit was obtained for both samples. The lignin in compression wood had a considerably lower reactivity to bromine than the normal wood lignin. A plataue value of 0.68 mole bromine/mol C₉-unit was obtained with such lignin. The discrepancy between this and earlier results from the bromination of middle lamella and the implication of the results for lignin determination by the SEM- and TEM-EDXA technique are discussed.     

Effects of genetic entry and competition by neighbouring trees on growth and wood properties of cloned Norway spruce (Picea abies)

? The aim of this work was to study both the effects of genetic entry and competition by neighbouring trees on growth, yield, wood density traits and fibre properties of 20 Norway spruce clones grown in an experimental trial located in southern Finland. The material included 10 Finnish clones, 2 Russian clones and 8 provenance-hybrids clones, the latter ones representing crosses between Finnish and foreign parent trees.

? We found that, compared to growth and yield, wood density traits and fibre properties showed, on average, lower phenotypic variations. Moreover, significant differences could be observed among the clones regardless of the trait (p < 0.05). Conversely, on average, no clear differences could be found between Finnish, Russian and provenance-hybrids clones in most of the studied traits.

? The marked differences among the clones, and lack of clear differences among the provenances suggested that any ranking, regarding different traits, should be based on individual clones. The phenotypic correlations between different traits ranged from moderate to strong suggesting that selection based on one trait would affect other traits. Regardless of clone, the growth of trees (e.g. breast height diameter) decreased and the wood density increased with increasing competition by neighbouring trees, which was expressed by competition index.

     

Infection of roots of Norway spruce (Picea abies) by Heterobasidion annosum

Wounding of excised roots of Norway spruce [Picea abies (L.) Karst.] caused a rapid accumulation of phenolic compounds, decrease of starch content and of certain enzyme activities in the ray cells. Infection of the wounds by Heterobasidion annosum (Fr.) Bref. intensified these processes, caused oxidation of the phenols, and induced activity of acid phosphatase and β-glucosidase in the ray cells of the infected area. The reactions were oxygen-dependent. Intra- and extracellular enzymes were detected in the wood-infecting hyphae. Other wood-growing fungi caused similar reactions in the wood as H. annosum.     

Effects of wide spacing and thinning strategies on wood quality in Norway spruce (Picea abies) stands in southern Sweden

Abstract

The initial density of a stand influences both the prethinning growth and the quality of the harvested trees. This study investigated the effects of different square spacings (2.0, 2.5 and 3.0 m) with thinning from above and thinning from below on stand development and tree characteristics in a 33-year-old Norway spruce [Picea abies (L.) Karst.] plantation in southern Sweden. Before thinning the total standing volume was not significantly different between treatments. Diameter at breast height (dbh) and diameter of the thickest branch were positively correlated. Before thinning, dbh of the trees and their thickest branches were significantly higher in the stands with 3.0 m spacing. After thinning, the dbh and the diameter of the thickest branch did not significantly differ between the 3.0 m spacing with thinning from above and 2.0 and 2.5 m spacing with thinning from below. Spacing did not significantly influence the presence or size of spike knots. The results suggest that a combination of wide spacing with thinning from above may yield timber of similar quality to denser spacing with thinning from below.     

Development and variation of wood density, kraft pulp yield and fibre dimensions in young Norway spruce (Picea abies)

Important wood, pulp and fibre properties were investigated on small wood samples from two Rumanian, one German and one Norwegian provenance of Norway spruce (Picea abies) grown in Sørkedalen, Norway. Several samples were collected from inside each single tree, both in radial and transversal direction in the stem. Data were collected from a total of 59 trees, each 28 years of age. All investigated properties showed close relationship to ring number (RN) (cambium age). For basic density and fibre wall thickness (FWT), a fast decline was first observed when moving from pith to bark and a minimum value was found around RN 5–8. The declining trend was then followed by an increase. Kraft pulp yield, fibre length and fibre width (FW) also increased with RN, but the increase was most pronounced close to the pith. The pulp yield (PY) more or less stabilised outside of RN 5–6. FW showed a decrease outside of RN 10–12, but this was probably due to the remarkable simultaneous drop in ring width for the investigated trees. FW decreased, while basic density and fibre length increased with increasing height in the tree. PY and FWT were not affected by height in tree. Diameter at breast height (DBH) was the most important variable indicating differences between trees in the investigated material. Basic density, fibre length and FWT decreased, while FW increased with increasing DBH. Height to crown had a positive effect on basic density, but had no influence on any of the remaining properties. Differences between provenances were found for basic density, fibre length and FW. The analyses showed that it is possible to describe the variation inside and between trees satisfactorily for a range of important wood and fibre properties.     

Light quality and growth of Norway spruce (Picea abies (L.))

Seedling of Norway spruce (Picea abies L.) were grown under three different light qualities in fluid-roof growth chambers. Blue light with a high red/far-red ratio decreased shoot length as well as total plant dry weight compared to natural light. Yellow light with a low blue/red ratio did not significantly affect the plants. The effects of light quality were generally the same at 18, 24 and 28 °C day temperature. Plant growth was reduced at temperatures above 24 °C.     

Lophodermium piceae and Rhizosphaera kalkhoffii in fallen needles of Norway spruce (Picea abies)

Falling needles collected from under individual 70-year-old Norway spruce (Picea abies) trees for about four years were checked for fungal fruitbodies. The most common fungi were Lophodermium piceae and Rhizosphaera kalkhoffii. Maximum frequencies of fruitbodies occurred in late autumn for L. piceae (ca. 80% of the needles), in summer for R. kalkhoffii (ca. 60%) and in winter for the third most common fungus, Tiarosporella parca (ca. 10%). The frequencies of needles with fruiting fungi varied greatly within and between years. This is the first report of T. parca from Sweden.     

Low-density Ceratocystis polonica inoculation of Norway spruce (Picea abies) triggers accumulation of monoterpenes with antifungal properties

Among the most devastating pests of Norway spruce (Picea abies) are the European spruce bark beetle (Ips typographus) and the associated pathogenic blue-stain fungus Ceratocystis polonica. Following attack and colonization, the beetle and the fungus must cope with induced host chemical defenses, such as monoterpenes that are generally thought to be toxic to both symbionts. The goal of this study was to better understand the response of Norway spruce following C. polonica inoculation at low density that does not overwhelm the tree and to identify monoterpenes mobilized toward the fungus. We inoculated healthy mature trees and monitored monoterpene profiles 2, 3, and 5 months post-inoculation. We also exposed three different C. polonica strains to the most abundant or significantly up-regulated monoterpenes to determine differences in monoterpene toxicity and resistance among strains. Total monoterpene levels, including limonene, were increased at 2 and 3 months after inoculation and had dropped after 5 months. In in vitro assays, all monoterpenes were inhibitory to C. polonica. Limonene and β-pinene were the most potent inhibitors of fungal growth. The extent of inhibition varied between the three strains tested. These results showed a defense response of Norway spruce to C. polonica, in which limonene may play a critical role in inhibiting the spread of the fungus. We also showed that differences between strains of C. polonica must be taken into account when assessing the role of the fungus in this bark beetle–symbiont system.     

Thermochemical behavior of Norway spruce (Picea abies) at 180–225 °C

Norway spruce (Picea abies) was heated for 2–8 h in the temperature range 180–225 °C, under a steam atmosphere. The chemical analyses of the treated feedstock samples indicated that during heating (total mass loss 1.5–12.5% of the initial DS) carbohydrates (hemicelluloses and cellulose) were clearly more amenable to various degradation reactions than lignin. In addition, major water-soluble products released from the feedstock material during the treatments were classified into several compound groups and changes in the relative mass portion of these groups were monitored by GC during a separate experiment. Received 20 December 1998     

Cadmium uptake in Norway spruce (Picea abies (L.) Karst.) seedlings

Root elongation of Norway spruce (Picea abies (L.) Karst.) seedlings was inhibited in the presence of 5 microM Cd, but was unaffected by a Cd concentration at 0.05 microM. Nutrient solutions labeled with (109)Cd were used to investigate the influence of pH, cations and the metabolic inhibitor 2,4-dinitrophenol (DNP) on the uptake of Cd by roots of intact spruce seedlings. Extracellular Cd was removed by washing the roots, and the relative amounts of Cd in the root apoplast and symplast estimated. In the presence of DNP, Cd uptake was reduced at 0.05 microM (non-toxic) but not at 5 microM Cd (toxic). At 0.05 microM Cd, the uptake of Cd into both the apoplast and symplast was dependent on the pH of the nutrient solution. Lower pH decreased Cd accumulation. Aluminum supplied at 100 or 500 microM lowered the Cd concentrations of both the apoplast and symplast. An increase in Ca or Mg supply reduced the Cd concentration of the apoplast but not of the symplast. In the presence of 5 microM Mn, the concentration of Cd in the symplast decreased by 44% compared to the control (1 microM Mn). High concentrations of Zn or Hg did not affect the Cd concentration of the roots.     

Variation in growth of Heterobasidion parviporum in a full-sib family of Picea abies

Abstract

Heterobasidion parviporum (Fr.) Niemelä & Korhonen and Heterobasidion annosum (Fr.) Bref. sensu lato are some of the major forest pathogens in the northern hemisphere causing root and butt rot to conifers. The relative susceptibility to H. parviporum was investigated in a full-sib family of Norway spruce [Picea abies (L.) Karst.] by inoculating a set of 252 cloned progenies from a controlled cross. Four ramets of each progeny were used and the 2-year-old rooted cuttings were incubated for 6 weeks under greenhouse conditions. The condition of the cuttings was assessed visually and all the plants were in excellent vigour with no mortality recorded during the experiment. To score the relative susceptibility, lesion length in the inner bark and fungal growth in the sapwood were measured. Among the progenies, significant differences were found for fungal growth in the sapwood (p<0.0005). There was no significant difference for lesion length; however, there was a significant positive correlation between fungal growth and lesion length. The broad-sense heritability was 0.11 for fungal growth. This shows that the genetic component for susceptibility to H. parviporum can be detected even within a full-sib family of Norway spruce and that there is a potential for mapping quantitative trait loci for this trait in Norway spruce.     

Seasonal variation in photochemical activity and hardiness in clones of Norway spruce (Picea abies)

We investigated changes in photochemical activity and cold hardiness of detached needles of three clones of Picea abies (L.) Karst. by measuring variable chlorophyll fluorescence (F(v)/F(m)), before and after artificial freezing, from September to June. Photochemical activity varied considerably during the study, but only minor differences in photochemical activity among the clones were observed before freezing. Photochemical activity was high during early fall and then declined from November until April. Photochemical activity was at a minimum in April and then increased quickly to high values in May. During the period from late September to October, and also during the winter, differences in F(v)/F(m) ratios after artificial freezing to below -10 degrees C were observed among clones, indicating clonal differences in cold hardiness and hardiness development. The clone having an average height of 2.3 m after 11 years showed consistently lower cold hardiness than clones that had reached average heights of 4.0 and 5.0 m. There were also differences in the temperature requirement for bud flushing among clones.     

The influence of magnesium deficiency on carbohydrate concentrations in Norway spruce (Picea abies) needles

Both short- and long-term effects of Mg deficiency on carbohydrate metabolism were investigated in 6-year-old clonal Norway spruce (Picea abies (L.) Karst.) trees cultivated in sand culture with an optimal supply of nutrients, except for Mg which was supplied at 0.203, 0.041 and 0.005 mM to provide optimal, moderately deficient and severely deficient Mg supply, respectively. Annual changes in carbohydrate concentrations (starch, sucrose, glucose and fructose) were analyzed and diurnal changes were investigated on a single day during the summer. Older needles of trees in the moderate Mg-deficiency treatment developed tip-yellowing symptoms, whereas current-year needles remained green. The severe Mg-deficiency treatment led to pronounced yellowing symptoms in needles of all ages. Increased carbohydrate concentrations were observed before needle yellowing occurred. Diurnal and annual changes in carbohydrates were similar in all treatments; however, carbohydrate concentrations were influenced by Mg supply. In both Mg-deficiency treatments, starch concentrations increased in needles, especially during summer and autumn. Starch accumulation was more pronounced at the beginning of the Mg-deficiency treatments than at the end of the treatments. Sucrose, and to a minor extent, glucose and fructose concentrations tended to increase in response to Mg deficiency. The consequences of Mg deficiency on carbohydrate metabolism are discussed with respect to reduced plant growth and decreased transport rates of carbohydrates to sink organs.     

Estimating foliage biomass in Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) plots

Dynamic decomposition models are needed to estimate changes in the carbon stock of boreal soil because these changes are difficult to measure directly. An important aboveground carbon flux to the soil is foliage litterfall. To estimate this flux, both the amount and the turnover rate of the foliage biomass component must be known. Several methods for estimating foliage biomass of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.), including biomass equations and biomass expansion factors (BEFs), were compared with predicted foliage biomass based on forest inventory plot-level measurements. Measured foliage biomass was up-scaled from the branch-level to the plot-level by combining forest inventory variables (diameter, height, height at the crown base and crown base diameter) based on the assumptions of pipe model theory. Combining the foliage biomass: cross-sectional area ratio with the forest inventory variables provided accurate estimates of foliage biomass at the plot-level for plots in southern Finland. The results emphasize the need to test biomass equations with independent data, especially when the equations applied are based on neighboring regions.     

Influence of a long-term storage in anaerobic conditions on Norway spruce (Picea abies,L. Karst.) physical and mechanical wood properties

Timber storage is a key aspect of storm damage management. After huge storms, sprinkling storage is usually the most used conservation process but anaerobic storage in sealed silos appears as good alternative to preserve wood quality over long periods. This paper investigates the impact of long-term (57 months) storage of Norway spruce logs in anaerobic atmosphere on wood properties. Tests were performed on clear wood specimens and on lumbers to determine the modulus of elasticity (E), the static bending strength (σ_f) and the dynamic bending strength (K). Storage effects on impregnability and colour variation were also studied. Results show no effect of storage on E, σ_f and K. The naturally poor impregnability of Norway spruce is not improved by the anaerobic conditions, compared to traditional wet storage. Triangle tests reveal no discernible colour variation between logs that underwent anaerobic storage and the control sample. As a conclusion, despite a mould (Gliocladium solani) frequently observed on logs surface after the storage, the process offers ideal conservation conditions. While overall cost remains the main drawback for using anaerobic storage at large scale, the process can be recommended for high value logs, especially since it has few environmental impacts.     

Successive bulk propagation of juvenile plants from full-sib families of Norway spruce

The results of bulk propagation of Norway spruce for one year are presented. The number of cuttings produced per seedling ranged from 21 to 38 between different families, with a large within-family variation. No clear relationship between family field performance and production of cuttings could be seen. Established cuttings produced more propagules per plant than seedlings in the first propagation. Misting gave about 92% rooting, with no significant differences between different rooting media used. A bulk propagation programme is proposed with a potential production of about 1000–1500 plants per germinated seed within 3 years of sowing.