Batch measurements of wood density on intact or prepared drill cores using x-ray microdensitometry

The performance of a batch scanning x-ray densitometer for measuring wood density without sample preparation, i.e., on intact drill cores, or on rectangular samples prepared from drill cores, was analysed. Effects of x-ray intensity, sample thickness and fiber direction, as well as extractives content, were evaluated for young (mainly sapwood) and old (mainly heartwood) wood from Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.). The x-ray power level used as standard (1.4 kW; 40 kV and 35 mA) seemed appropriate for the tested species and specimen thickness. The density of intact drill cores could be determined with a mean standard deviation of 1.6% for each sample, with a single machine run, if the cores were mounted with a fixed fiber direction and calibrations were made for each wood type. The corresponding precision for rectangular samples was 1.0%. Further improvements are attainable by using standard reference samples in each machine run and batch-wise analysis. For the chosen wood types and measurement technique, a sample thickness of 5 mm should give the best precision. However, for species with very narrow rings, thinner samples would improve the spatial resolution when ring boundaries are angled or curved. Extractives should be removed, especially for pine, but possibly also for spruce, if high precision in density determination is required. Received 19 January 2000     

Crystalline structure of heat-treated Scots pine [<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.] and Uludağ fir [<Emphasis Type="Italic">Abies nordmanniana</Emphasis> (Stev.) subsp. <Emphasis Type="Italic">bornmuelleriana</Emphasis> (Mattf.)] wood

The aim of this study was to determine changes in crystallinity and crystalline unit cell type of heat-treated Scots pine (Pinus sylvestris L.) and Uludağ fir (Abies nordmanniana stev. subsp. bornmuelleriana Mattf.) wood samples by means of FT-IR spectroscopic method. Heat treatment was applied on the test samples in an oven at three different temperatures (120, 150, and 180°C) and for two different periods of time (6 and 10 h) under atmospheric pressure. It was designated that crystallinity of both Scots pine and Uludağ fir wood samples increased during heat treatment depending on the duration. However, monoclinic structure in crystalline unit cells of Scots pine and Uludağ fir wood samples converted to triclinic structure when heat treated. It was estimated that monoclinic structure was dominant in the crystalline unit cell. It was established that the crystalline structure of Scots pine wood samples was more affected by heat treatment than that of Uludağ fir wood samples.     

Outdoor exposure of untreated Scots pine (Pinus sylvestris L.) and Norway spruce [Picea abies (L.) Karst.] wood samples

Abstract

Untreated Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) samples were exposed above ground in a durability test for 6 years. The samples consisted of three pieces of wood, 22×95×500 mm, screwed together; two pieces lengthwise with a third piece overlapping. Weight was measured, to calculate moisture content (MC), and samples checked regularly for cracks and fungal growth. Parameters investigated were heartwood/sapwood (pine), annual ring orientation (spruce), stand site, annual ring width and density. Stand site, annual ring width and density had no influence on MC or fungal growth for either pine or spruce. Spruce samples with vertical annual rings had fewer cracks than samples with horizontal annual rings. Pine sapwood samples had a high MC and a large amount of rot fungi, while heartwood had a lower MC and no rot. Most spruce samples were similar to pine heartwood, except from a few samples that had high MC and fungal growth. Those were all sawn from the outer part of the log. Therefore, it can be stated that spruce sawn from the inner part has almost the same properties as pine heartwood, while spruce from the outer part of the log has similar properties to pine sapwood.     

The effects of pine mistletoe (Viscum album subsp. austriacum) on the growth of Scots pine and Crimean pine in Turkey

In this study, the effect of pine mistletoe (Viscum album subsp. austriacum) on basal area increment of Crimean pine and Scots pine was investigated. Dendrochronological data were collected from 223 (71 uninfected and 152 infected) Crimean pines and 195 (77 uninfected and 118 infected) Scots pines located in Kastamonu province of Turkey in 2014. Infected sample trees were classified as light, moderate or severe infection levels. Growth trends and basal area increment loses were compared between uninfected and infected trees for the periods of the last 10, 20 and 30 years. In addition, infection status of forest stands was investigated using temporary sample plots; 27 plots in Crimean pine stands and 26 plots in Scots pine. Results demonstrated that basal area increments were negatively affected by pine mistletoe for both species. Mean basal area increment losses of infected trees for the last decade were determined as 24% for Scots pine and 26% for Crimean pine. Basal area increment losses varied by infection levels (light, moderate and severe) as follows: 25%, 20% and 28% for Scots pines and 20%, 32% and 9% for Crimean pines. Scots pine stands were more severely infected by pine mistletoe than Crimean pine stands. There were negative correlations between number of infected trees and stand density for both species, while positive correlation was detected between the number of infected trees and mean diameter for Scots pine. The results of this study indicate that the pine mistletoe infection has negative effect on radial growth of Scots pine and Crimean pine trees. The results can be an important contribution to the forest management and protection activities in mistletoe-infected stands.     

CLIMATE AND SILVICULTURAL IMPLICATIONS IN MODIFYING STAND COMPOSITION IN MIXED FIR-PINE STANDS

ABSTRACT

A growing concern exists over the decreasing proportion of Scots pine (Pinus sylvestris L.) trees in mixed Trojan fir (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. Ex Boiss] Coode & Cullen)-Scots pine forests in northern Turkey. Given the changes in mean annual temperature and annual precipitation for the last 40 years in the region, understanding of the sensitivity of Trojan fir and Scots pine trees to changing climate seems to be critical so that better management strategies can be developed against the potential climate extremes of the future in the region. Moreover, our knowledge on the influence of current silvicultural methods on seedling density and growth in these forests is limited. Therefore, in this study, the growth response (i.e., radial growth) of Trojan fir and Scots pine trees to the changing climate were examined. In addition, the influence of current silvicultural practices on seedling growth and density in these forests was also monitored. Trojan fir appeared more sensitive to the climatic variables (i.e., temperature and precipitation) than Scots pine in the region. It was also found that the current silvicultural practices might favor Trojan fir over Scots pine in these forests. Natural dynamics and current silvicultural implications would benefit Trojan fir, however, given the species’ potential sensitivity to the changing climate, current silvicultural approaches can be modified to favor Scots pine, and to increase the resilience of these forests against climate extremes expected in the region’s future.     

Susceptibility of four conifer species to Gremmeniella abietina

G. abietina causes severe dieback in pole-stage stands of Scots pine in Britain. The susceptibility of ll provenances of Scots pine and of three other conifer species was tested by inoculations. Significant differences in susceptibility were found amongst Scots pine provenances, with those originating from a native Scottish pinewood at Loch Maree showing the highest levels of disease. Corsican pine was shown to be the most susceptible species tested although sporulation was greatest on Scots pine. Norway spruce was also shown to be susceptible when inoculated late in the growing season. Infection in lodgepole pine was negligible. High levels of β-phellandrene were tentatively linked with resistance among trees in a single stand of Scots pine.     

Differences in Agrobacterium infections in silver birch and Scots pine

The aim of this study was to investigate the differences in infections caused by Agrobacterium tumefaciens in a conifer, Scots pine (Pinus sylvestris), and in a non-host deciduous species, silver birch (Betula pendula). All the Agrobacterium tumefaciens strains tested caused crown-gall formation in both tree species, but the infection rates varied remarkably. In Scots pine, the development of galls was rare, and slower than in silver birch. Inoculation into the base of the stem were the most successful in gall induction. Silver-birch galls were large, often surrounding the whole stem, in contrast to Scots pine galls, which were characterized by their small size and neck-like connection with the host plant. In silver birch, no other morphological changes could be seen. In Scots pine, abnormal phenotypes with proliferating short shoots above the galls were observed during the second and third growing season. The results indicate that, of the two non-host tree species, the deciduous one, silver birch, is more susceptible to an A. tumefaciens infection than the conifer, Scots pine. The matrix for A. tumefaciens infection in silver birch differs from that in Scots pine, since the terpene compounds of Scots pine seem either to kill the agrobacteria or to suppress their growth. The differences between the species could be partly caused by their difference in sensitivity to phytohormones. These features reflect evolutionary incompatibility between A. tumefaciens and a gymnosperm.     

Low- to moderate-severity historical fires promoted high tree growth in a boreal Scots pine forest of Norway

Abstract

Fire is the most important ecological factor governing boreal forest stand dynamics. In low- to moderate-severity fires, the post-fire growth of the surviving trees varies according to fire frequency, intensity and site factors. Little is known about the growth responses of Scots pine (Pinus sylvestris L.) following fires in boreal forests. We quantified changes in tree growth in the years following 61 historical forest fires (between 1210 and 1866) in tree-ring series collected from fire-scarred Scots pine trees, snags and stumps in Trillemarka nature reserve in south-central Norway. Basal area increment 10 years pre-, 5 years post-, and 11–20 years post-fire were calculated for 439 fire scars in 225 wood samples. We found a slight temporary growth reduction 5 years post-fire followed by a marked growth increase 11–20 years post-fire. Beyond 20 years post-fire, the long-term tree growth declined steadily up to approximately 120 years. Our results indicate that recurring fires maintained high tree growth in remnant Scots pines, most probably due to a reduction in tree density and thus decreased competition.     

Damage by pine weevil Hylobius abietis to conifer seedlings after shelterwood removal

Abstract

Pine weevil (Hylobius abietis L.) damage to seedlings after overstorey removal was investigated in a survey study in six shelterwoods in the south–central part of Sweden. The shelterwoods predominantly consisted of Scots pine, except at one site where the shelter trees mainly consisted of Norway spruce. Before final cutting, 10 plots were laid out at each site and measurements of shelter trees and marked seedlings were taken. The seedlings were examined during the 2 years after final cutting. The study showed that removal of shelter trees increases the risk of severe damage by pine weevil and the variable that was most strongly correlated with the risk was the seedling root collar diameter. Both Scots pine and Norway spruce seedlings were severely damaged by pine weevil, and most of the feeding occurred during the first year after cutting. The amount of debarked area was significantly larger for Scots pine than for Norway spruce seedlings. Vitality (growth of the leading shoot before final cutting) of the seedlings also affected the probability of damage. Seedlings with high vitality were less damaged by pine weevil than seedlings with low vitality. For Scots pine the shelterwood density before final cutting was correlated to the intensity of pine weevil feeding after cutting. In conclusion, after the final cutting of a pine or spruce shelterwood, pine weevils will probably invade the area. To avoid serious damage, Norway spruce and Scots pine seedlings should have reached a diameter of at least 10–12 mm.     

Detection of the effective refractive index of thermally modified Scots pine by immersion liquid method

The purpose of this study was to determine the effective refractive index of thermally modified Scots pine (Pinus sylvestris L.) wood specimens as a quantitative measure regarding the change of wood density which is due to the thermal modification. The refractive index of thermally modified Scots pine wood was obtained by introducing pine wood powder into an immersion liquid and measuring light backscattering with a homebuilt multifunction spectrophotometer. The present method provides useful information that in principle can be applied, for example, in the optimization of the thermal modification process and inspection of the quality of thermally modified wood.     

Swedish lodgepole pine seed orchard crops tested in north-west Russia

Abstract

Tree vitality and height of lodgepole pine (Pinus contorta var. latifolia) originating from the six Swedish seed orchards and native Scots pine (Pinus sylvestris L.) were estimated in three 8-yr-old test plantations established in the Komi Republic (north-west Russia). A randomized row-plot design with 9–13 replicates of each entry was used. In general, the Scots pine tree vitality was better than that of lodgepole pine but these differences were significant only for seed sources of southern origins Larslund, Rumhult, and Österby. On the contrary, the lodgepole pine height growth was faster (6–21%) except for seed sources of southern origins Rumhult and Österby. In comparison with the native Scots pine, lower mean heights (4–10%) were recorded for these seed sources. Among the lodgepole pine seed sources the northern origins had better vitality, while the effect of latitude on the tree height was insignificant.     

Seedling shoot,needle and bud development in three provenances of Pinus sylvestris and Pinus contorta cultivated in northern Sweden

The patterns of current‐year shoot, needle and terminal bud elongation in seedlings of three Scots pine (Pinus sylvestris L.) and three lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.) provenances were compared during the third and fourth growing seasons after planting. Lodgepole pine produced longer shoots and buds than did Scots pine, mainly because lodgepole pine formed more stem units and elongated at a faster rate. Stem unit length and the duration of shoot and bud elongation differed relatively little between species and provenances. Lammas or polycyclic growth occurred in some lodgepole pine provenances, but not in any Scots pine provenance, and was associated with enhanced shoot elongation. Needle elongation commenced earlier, proceeded at a faster rate, and was greater in lodgepole pine than in Scots pine, but ceased about the same time in all species and provenances. The heat sum required to attain 50% of final length was lower for shoots and needles in lodgepole pine than in Scots pine, and for shoots in northern provenances than in southern ones. Mitotic activity in the apical meristem of the terminal bud, which occurred less than one week after the seedlings were free from snow, started and ceased about the same time in each species, but was higher in lodgepole pine than in Scots pine early in the shoot elongation period.     

Stand Density Control Diagrams for Scots pine and Austrian black pine plantations in Bulgaria

Stand Density Control Diagram (SDCD) is a stand-level mathematical model, which describes the relationships between yield, density and mortality throughout all stages of stand development. The SDCD is primarily used to derive density control schedules by management objectives. The main objectives of the present study are to define a modified model of SDCD for application to Scots pine (Pinus sylvestris L.) and Austrian black pine (Pinus nigra Arn.) plantations in Bulgaria, to examine the fitness of the model with representative experimental data sets from plantations of both species and to present a way of direct application of the SDCDs for practical purposes. The constructed SDCDs characterize the spatial-temporal dynamics of the pine plantations in a broad range of densities, forest sites and growth stages from 4 to 26 (28) m of dominant height class. The full density lines were fixed with self-thinning exponents α = 1.69 and α = 1.75 for Scots pine and Austrian black pine, respectively, and the trajectories of natural thinning for 23 initial densities (444-40000/ha) were determined. A direct way for application of the SDCDs to the plantation management was designed to estimate the optimal initial densities for the maximum attainable final yield and large-size wood production by self-thinning stands.     

Long-term trends in height growth of Picea obovata and Pinus sylvestris during the past 100 years in Komi Republic (north-western Russia)

Abstract

Adapting forest management practices to the changing environment of Komi Republic requires an understanding of the response of unmanaged natural forests to climatic changes. Komi Republic is a region of north-western Russia where large areas of natural boreal forest still exist. Apical growth of Scots pine (Pinus sylvestris L.) (108 trees, 529 discs) and Siberian spruce (Picea obovata Ledeb.) (88 trees, 423 discs) was analysed using stem analysis techniques. Mean apical growth curves were calculated for four zones of boreal forests in two subsequent 50 year periods starting from 1900. A statistically significant increase in height increment of 40% for Siberian spruce and 30% for Scots pine was identified from samples representing the Komi Republic. Within this region statistically significant height increment increases were found in the middle taiga zone for Siberian spruce of 240% and Scots pine of 140%, while northern taiga Siberian spruce increased by 164%. Taking into account that trees were samples in remote untouched pristine forests, the main causes of increased height increment are suggested to be climatic, which shows a large increase in temperature (0.43°C during the past 30 years) and a modest decrease in precipitation (2.2% over the past 30 years).     

Seasonal dynamics of wood formation: a comparison between pinning,microcoring and dendrometer measurements

Three different methods were evaluated for analysing wood formation of Norway spruce [Picea abies (L.) Karst.] and Scots pine (Pinus sylvestris L.) in Finland. During two growing seasons, wood formation dynamics were determined both by wounding the cambium with a needle followed by localisation of the wound-associated tissue modification after the growing season (pinning), and by extracting small increment cores during the growing season (microcoring). Stem radius was additionally monitored with band dendrometers. For Norway spruce, pinning and microcoring yielded similar dates for the onset of wood formation. The timing of wood production during the growing season was also similar for pinning and microcoring. For Scots pine, the onset of wood formation was recorded from microcores almost 2 weeks later than from pinning samples. In Scots pine, microcore measurements also produced somewhat later cessation dates for tracheid formation than the pinning samples. For both tree species, the total number of tracheids formed during the growing season was, however, about the same for pinning and microcoring. Dendrometer results clearly differed from those of pinning and microcoring. In particular, the dendrometers showed an increase of stem radius considerably earlier in spring, when the other methods did not detect wood formation. Thus, pinning and microcoring currently represent the most reliable techniques for detailed monitoring of wood formation.     

Abundance and control of Lygus rugulipennis (Heteroptera: Miridae) on Scots pine (Pinus sylvestris L.) nursery stock

Population fluctuations of the European tarnished plant bug (Lygus rugulipennis Popp.) on nursery-grown Scots pine, Pinus sylvestris L. were monitored with sweep net samples over five growing seasons. The effects of cypermethrin, lindane and oxydemetonmethyl insecticide sprayings on the occurrence of Lygus adults and nymphs and prevalence of bud disorders of pine seedlings were studied. The number of Lygus bugs was highest in 1984, the first year of the study, and thereafter the annual levels of the bug declined, reaching a low in 1988. On 2- and 3-year-old Scots pine seedlings the numbers of overwintered L. rugulipennis adults and nymphs correlated positively with the occurrence of abnormal buds. Cypermethrin sprayings significantly reduced the numbers of Lygus nymphs in 1985 and 1987. In 1986 significantly fewer damaged seedlings and L. rugulipennis adults were found in pine transplants treated with cypermethrin.     

Infection experiments with Gremmeniella abietina on seedlings of Norway spruce and Scots pine

Conidia of Gremmeniella abietina infected and caused disease symptoms in annual shoots of both Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) seedlings. In Norway spruce shoots the infection remained largely latent, with only a few seedlings showing symptoms. Mycelial growth inside the shoots was faster in Scots pine than in Norway spruce and was favoured by low temperature in both hosts. The shoots of Norway spruce seedlings had higher endophyte populations than those of Scots pine, and the populations were decreased by low temperatures. Reductions in the normal epiphytic or endophytic flora by acid mist treatments seemed to favour the development of G. abietina.     

Stand and site characteristics in the decline of pinus sylvestris caused by gremmeniella abietina shoot disease in a severely damaged 50‐year‐old plantation in se lapland

The role of stand and site characteristics in a 50‐year‐old, sowed Scots pine (Pinus sylvestris L.) stand on the decline of Scots pine caused by Gremmeniella abietina was studied. Treewise damage of Scots pine was modelled using stand and site variables and stepwise regression analysis. The significant variables included in the model were stand elevation from the main cold air centre and the pH of the humus layer, while the other less significant variables were the number of stems per hectare of Scots pine and Norway spruce, content of Cu and Ni in the humus layer, and the thickness of the humus layer and the A₂ horizon. The studied variables excluded from the model were the number of broad‐leaved trees per hectare, Al and Pb contents in the humus layer, and Al, Cu, Pb and Ni contents in the A₂ horizon. The results strongly suggest that the vicinity of water as well as local depressions act as vulnerable sites for Scots pine and the said vulnerability is enhanced by increased pH of the humus layer.     

Effects of silvicultural cleaning in mixed pine‐deciduous stands on moose damage to scots pine (Pinus sylvestris)

Silvicultural cleaning is commonly carried out in young stands to control competition between conifers and deciduous tree species. However, it has been questioned whether this practice affects moose (Alces alces L.) browsing on Scots pine (Pinus sylvestris L.) with respect to damage at the stand level. In this study, moose winter browsing was examined in relation to food availability in 19 Scots pine stands divided into silviculturally cleaned and non‐cleaned blocks. Cleaning had a negative effect on moose foraging in terms of reduced density, biomass availability, and height of the deciduous tree species. The total biomass consumed by moose was significantly lower on the cleaned blocks than on the non‐cleaned ones. There were no differences between the treatments in the amounts of pine consumed and in moose damage to pines. The density or biomass available of different deciduous tree species did not explain the variation in moose browsing on pine. In conclusion, timing of silvicultural cleaning with reference to moose browsing should be taken into account. If pines are not overtopped by deciduous trees, as in the present study, silvicultural cleaning is not necessary to prevent moose damage.