Effect of growth regulators on yield and fiber quality in ramie (Boemheria nivea (L.) Gaud.), China grass

The effects of two mixtures of four plant growth regulators (choline chloride, gibberellin (GA₃), benzyladenine (6-BA) and NaHSO₃) at 20:9:5:800 mg kg⁻¹ (H1) and 20:42:43:2350 mg kg⁻¹ (H3) (active ingredients), respectively, were investigated on yield and fiber quality in ramie (Boehmeria nivea (L.) Gaud.). The mixtures were sprayed over the canopy at two growth stages (10 and 20 days after the previous cut) of field-grown ramie. The treatments increased raw fiber yield by 13–18%, and improved fiber fineness by 57–349 m g⁻¹, increased number of leaves per plant, and also improved all yield components. Treatment H1 resulted in a denser distribution, smaller diameters and greater quantity of fiber cells in stem cross-section. Physiological responses included improving leaf water status, increasing net photosynthetic rate, and decreasing electrolyte exosmosis rate.     

Effect of chloride in irrigation water and form of nitrogen fertilizer on Virginia (flue-cured) tobacco

One of the main sources of considerable amounts of chloride to soils is irrigation water. The responses of tobacco (Nicotiana tabacum L.) to chloride are varied and inconsistent depending on the tobacco type, variety and methods of fertilization, cultivation and harvesting used. In this work, the impact of the interaction between four chloride levels (10, 20, 40, 80 mg L⁻¹) in irrigation water and three nitrogen fertilizer forms (NO₃–N 100%, NH₄–N 100% and NO₃–N 50%:NH₄–N 50%) on growth, agronomic and chemical characteristics of Virginia tobacco was evaluated over 2 years (1999, 2000) in an outdoor pot experiment. The results showed that the adverse influence of chloride in irrigation water on plant height and number of leaves per plant was already substantial above 40 mg L⁻¹, within 30 days after transplanting. In this period, visual toxicity symptoms of chloride appeared on the lower leaves of plants treated with ammonium nitrogen. In addition, the effect of chloride on flowering time, chlorophyll content of leaves, aboveground fresh weight of plant, total cured product yield and chemical characteristics, depended on the form of nitrogen, with nitrate nitrogen restricting the detrimental effects of chloride in irrigation water up to 40 mg L⁻¹. The reduced yield of cured product at 80 mg L⁻¹ was the result of the adverse effects of chloride on the leaves of the middle and upper stalk position. Leaf chloride concentration was highest in the upper leaves and increased linearly with the increase of chloride level in irrigation water at each leaf position on the stalk and this increase was more rapid as ammonium nitrogen percentage was increased. Chloride increased the concentration of reducing sugars in cured leaves at each leaf position, in all nitrogen forms and nicotine mainly in plants treated with nitrate nitrogen. The changes in total nitrogen and ash content are considered as minimal. We conclude that the optimum chloride level in irrigation water is below 20 mg L⁻¹, whereas the level of 40 mg L⁻¹ in combination with nitrate nitrogen fertilizers can be considered as the upper threshold to avoid adverse effects on Virginia tobacco.     

Modeling chickpea growth and development: Nitrogen accumulation and use

Quantitative information regarding nitrogen (N) accumulation and its distribution to leaves, stems and grains under varying environmental and growth conditions are limited for chickpea (Cicer arietinum L.). The information is required for the development of crop growth models and also for assessment of the contribution of chickpea to N balances in cropping systems. Accordingly, these processes were quantified in chickpea under different environmental and growth conditions (still without water or N deficit) using four field experiments and 1325 N measurements. N concentration ([N]) in green leaves was 50 mg g⁻¹ up to beginning of seed growth, and then it declined linearly to 30 mg g⁻¹ at the end of seed growth phase. [N] in senesced leaves was 12 mg g⁻¹. Stem [N] decreased from 30 mg g⁻¹ early in the season to 8 mg g⁻¹ in senesced stems at maturity. Pod [N] was constant (35 mg g⁻¹), but grain [N] decreased from 60 mg g⁻¹ early in seed growth to 43 mg g⁻¹ at maturity. Total N accumulation ranged between 9 and 30 g m⁻². N accumulation was closely linked to biomass accumulation until maturity. N accumulation efficiency (N accumulation relative to biomass accumulation) was 0.033 g g⁻¹ where total biomass was <218 g m⁻² and during early growth period, but it decreased to 0.0176 g g⁻¹ during the later growth period when total biomass was >218 g m⁻². During vegetative growth (up to first-pod), 58% of N was partitioned to leaves and 42% to stems. Depending on growth conditions, 37–72% of leaf N and 12–56% of stem N was remobilized to the grains. The parameter estimates and functions obtained in this study can be used in chickpea simulation models to simulate N accumulation and distribution.     

Ultrahigh CO2 levels enhances cuphea growth and morphogenesis

Applications of ultrahigh CO₂ treatments accelerated cuphea (Cuphea viscosissima × C. lanceolata ‘PSR23’) growth and development and aided in seedling establishment. The growth (fresh weight) and morphogenesis (number of leaves and roots and seedling length) were determined in cuphea seedlings exposed to 350, 1500, 3000, 10,000, or 30,000 μmol mol⁻¹ CO₂ for 30 days under greenhouse conditions. Greater CO₂ levels, especially the ultrahigh levels (i.e. ≥3000 μmol mol⁻¹ CO₂) resulted in significantly higher (P ≤ 0.05) fresh weights, leaf numbers, root numbers, and seedling lengths compared to seedlings grown under ambient air (350 μmol mol⁻¹ CO₂). For example, cuphea ‘PSR23’ Morris heavy seedlings showed the greatest seedling fresh weight, leaf number, root number, and seedling length when supplemented with 10,000 μmol mol⁻¹ CO₂ increasing 607%, 184%, 784%, and 175%, respectively, when compared to seedlings grown without CO₂ enrichment.     

First results on evaluation of Arundo donax L. clones collected in Southern Italy

The research of alternative crops for biomass production for energy indicates giant reed (Arundo donax L.), widespread spontaneous plant in Mediterranean regions, among the species at high aptitude for accumulation of biomass. Within the activity of an E.U. programme (CEE FAIR CT 97-2028 “Giant reed (A. donax L.) Network. Improvement, productivity and biomass quality”, germplasm of giant reed were collected to evaluate potential production and the phenotypic and genotypic variability, the heritability in order to selecting the best genotypes.In 1997 and 1998, trials were carried out in Primosole site (Piana of Catania, sea level, 37°25′N latitude; 15°30′E longitude), utilizing rhizomes of 39 clones collected in Sicily and Calabria. The rhizomes were transplanted in springtime. Phenological (date of flowering), biometrical (stem density, stem height, number of nodes per stem, diameter and thickness of stems, weight of fresh and dry biomass of leaves, stems and inflorescence) and productive (yield) data were measured. Harvest were carried out in February 1988 and 1989.Yield of 39 clones studied was, in the average, 10.6 t ha⁻¹ of dry matter in the first year and 22.1 t ha⁻¹ in the second one. The clone no. 4 (Piazza Armerina) and the clone no. 20 (Capo d’Orlando) maintained their high productive aptitude in both years; they yielded respectively, 13.1 and 14.1 t ha⁻¹ in the first year and 34.2 and 26.9 t ha⁻¹ in the second one.The yield results positively correlated to stem density, stem weight and plant height. Four characters: biomass yield, stem weight, stem density and stem height showed a significant variance among clones without significant interaction with year. Among the eleven characters measured only yield, stem weight, stem density and stem height had moderate heritability (h²), comprised between 23 and 48% showing promise for genetic improvement.     

Genetic gains in grain yield and related physiological attributes in Argentine maize hybrids

Genetic gains in grain yield and related phenotypic attributes have been extensively documented in maize (Zea mays L.), but the effect of breeding on the physiological determinants of grain yield is yet poorly understood. We determined genetic gains in grain yield and related physiological traits for seven maize hybrids developed for the central region of Argentina between 1965 and 1997. Gains were expressed as a function of the year of release (YOR). Hybrids were cropped in the field at five stand densities (from almost isolated plants to supra-optimal levels) during two contrasting growing seasons (E₁ and E₂). Water and nutrient stress were prevented and pests controlled. Genetic gains in grain yield (≥13.2 g m⁻² YOR⁻¹) were mainly associated with improved kernel number, enhanced postsilking biomass production, and enhanced biomass allocation to reproductive sinks, but computed gains were affected by the environment. Differences among hybrids arose at the start of the critical period, and were evident as improved mean radiation use efficiency (≥0.026 g MJ⁻¹ YOR⁻¹), enhanced plant growth rate at near optimum stand density (≥0.04 g pl⁻¹ YOR⁻¹), and improved biomass partitioning to the ear around silking (0.0034 YOR⁻¹, only for E₁). Improved biomass production after silking was related to an increased light interception (≥4.7 MJ m⁻² YOR⁻¹), and allowed for an almost constant source–sink ratio during grain filling. This trend determined no trade-off between kernel number and kernel weight. In contrast to previous studies, genetic gains were detected for potential productivity (e.g., maximum grain yield) on a per plant basis (i.e., under no resource competition), a promising aspect for the improvement of crop grain yield potential.     

Long-term effect of tillage systems on soil microbiological,chemical and physical parameters and the incidence of charcoal rot by Macrophomina phaseolina (Tassi) Goid in soybean

A 20-year field experiment was employed with the aim of evaluating the effect of tillage systems on biological, chemical and physical aspects of the soil, and to establish whether there was a correlation of these parameters with the incidence of charcoal rot (Macrophomina phaseolina) of soybean and crop yield. The tillage systems evaluated were direct seeding (DS), DS + scarifier (DS + S), minimum tillage (MT) and conventional tillage (CT). DS presented higher values than CT in culturable total fungi (26.33 × 10⁵ vs. 2.33 × 10⁵ CFU g⁻¹ dry soil), total bacteria (182 × 10⁷ vs. 64 × 10⁷ CFU g⁻¹ dry soil), microbial respiration (0.77 mg CO₂ g⁻¹ week⁻¹ vs. 0.45 mg CO₂ g⁻¹ week⁻¹) and fluorescein diacetate (FDA) hydrolysis (4.17 ug fluorescein g⁻¹ h⁻¹ vs. 1.70 ug fluorescein g⁻¹ h⁻¹ in CT. Fungal and bacterial community fingerprints, by terminal restriction fragment length polymorphism (T-RFLP) analysis, of Intergenic spacer regions of rRNA and 16S rRNA genes, respectively, were influenced by the tillage system. Also FAME (fatty acid methyl ester) profiles showed that microbial community structure in DS and CT was clearly different. DS samples contained significantly higher total microbial biomass than the other tillage treatments, but there were no significant differences in fungal biomass or any consistent trend with respect to stress index. Our results showed that microbial communities were more abundant and active in DS than in CT in response to high nutrient content in soil. Indeed, DS systems presented higher soil OM, total N, K and Ca than CT. Electrical conductivity and aggregate stability (AS) were also improved by DS. Soybean grown in high-quality soil was not affected by charcoal rot, however, under CT, disease incidence in soybean was 54%. These differences were correlated to the higher microbial abundance and activity under DS, the biological component being a key factor determining soil capacity to suppress the soilborne pathogen.     

Grain concentrations of protein and mineral nutrients in a large collection of spelt wheat grown under different environments

A large number of spelt wheat genotypes (ranging from 373 to 772) were evaluated for grain concentrations of protein and mineral nutrients under 6 different environments. There was a substantial genotypic variation for the concentration of mineral nutrients in grain and also for the total amount of nutrients per grain (e.g., content). Zinc (Zn) showed the largest genotypic variation both in concentration (ranging from 19 to 145 mg kg⁻¹) and content (ranging from 0.4 to 4.1 μg per grain). The environment effect was the most important source of variation for grain protein concentration (GPC) and for many mineral nutrients, explaining between 37 and 69% of the total sums of squares. Genotype by environment (G × E) interaction accounted for between 17 and 58% of the total variation across the minerals. GPC and sulfur correlated very significantly with iron (Fe) and Zn. Various spelt genotypes have been identified containing very high grain concentrations of Zn (up to 70 mg kg⁻¹), Fe (up to 60 mg kg⁻¹) and protein (up to 30%) and showing high stability across various environments. The results indicated that spelt is a highly promising source of genetic diversity for grain protein and mineral nutrients, particularly for Zn and Fe.     

Seed physiological maturity in Cuphea

Cuphea (Cuphea viscosissima Jacq. × C. lanceolata f. silenoides W.T. Aiton, line PSR23) is a new crop being developed in the North Central United States, as an industrial oilseed crop. Cuphea PSR23 seed oil is rich in medium-chain-length fatty acids such as capric acid used to manufacture soaps and detergents. The objective of this research was to determine the time when physiological maturity of cuphea seed is reached and how seed development affects seed moisture, weight, oil content, fatty acid content, germination, and seedling vigor. To evaluate seed development, 2000 cuphea flowers were tagged at anthesis in the field at Prosper, North Dakota in 2004 and 2005. Each flower was tagged when open and the position on the main stem or branch was recorded. Two hundred capsules from the tagged flowers were harvested at 3- to 4-d intervals from 5- to 48-d post anthesis (DPA). Seed weight increased as a function of growing degree days (GDD) and the days from anthesis. Physiological maturity occurred when maximum dry seed weight was attained. Seed weight increases followed the Gompertz function with a R² = 0.90 (2004) and R² = 0.95 (2005). All capsules, regardless of their position on the stem, followed the same growth function for seed weight. The maximum dry seed weight estimated by the Gompertz function was 3.61 for 2004 and 3.58 mg seed⁻¹ for 2005. Physiological maturity estimated with a quadratic function occurred at 38 DPA or 270 GDD in 2004. In 2005, physiological maturity occurred at 26 DPA or 265 GDD. As a visual indicator when the capsules split-open seeds inside that capsule are physiologically mature. Seed moisture decreased from 900 g kg⁻¹ at 37 GDD post anthesis to 450 g kg⁻¹ at 319 GDD post anthesis in 2004; however, in 2005 seed moisture decreased from 850 to 81 g kg⁻¹ at 293 GDD post anthesis. Seed germination increased as seed developed and it was 83% when harvested 234 GDD post anthesis. Oil content increased from 98 g kg⁻¹ at 37 GDD post anthesis to 279 g kg⁻¹ 319 GDD post anthesis. Fatty acid composition varied throughout seed development. Seed development for 111 GDD and greater had more than 66% of capric acid (10:0). Cuphea should be harvested after 265 GDD post anthesis when most capsules on the main stem are split-open, have attained maximum seed weight, germination, seedling vigor, and oil content.     

Effect of N rate,timing and splitting and N type on bread-making quality in hard red spring wheat under rainfed Mediterranean conditions

Three different experiments were designed to study the effects of N fertilizer rate, timing and splitting, and the response to combined application of N and S fertilizer on the bread-making quality of hard red spring wheat (Triticum aestivum L.) over a 3-year period in Vertisols under rainfed Mediterranean conditions. The following parameters were analyzed: grain yield, test weight, grain protein content, gluten index and alveograph parameters (W: alveogram index; P: dough tenacity; L: dough extensibility; P/L: tenacity–extensibility ratio). The N rate experiment included rates of 0, 100, 150 and 200 kg N ha⁻¹ applied on four different sites. The experiment was designed as a randomized complete block with four blocks. For the experiment on N timing and splitting, a single rate of 150 kg N ha⁻¹ was used, different fractions being applied at sowing, tillering and stem elongation, at a single site; again, experimental design was a randomized complete block with four blocks. Finally, for the experiment on the response to combined application of N and S fertilizer, a single fertilizer dose of 150 kg N ha⁻¹ was applied in two forms (urea+ammonium nitrate and urea+ammonium nitrosulfate) with one leaf application at ear emergence (zero, 25 kg S ha⁻¹, 25 kg N ha⁻¹, $\text{25}\text{kg}\text{S}\text{ha}{}^{\mathrm{-1}}\text{+25}$ kg N ha⁻¹ and 50 kg N ha⁻¹), also at a single site, using a split-plot design with four replications. Year-on-year variation in rainfall led to marked variations in wheat yield, grain protein content and bread-making quality indices. A close correlation was observed between rainfall over the September–May period and both grain yield and grain protein content (optimum values for both being recorded in the rainfall range 500–550 mm) as well as the alveogram index. A negative correlation was observed between mean maximum temperatures in May and both test weight and alveogram index (W). N fertilizer rate had a more consistent effect on bread-making quality than on grain yield. The highest values for grain yield were recorded at an N rate of 100 kg ha⁻¹, while maximum grain protein content values were recorded at 150 kg ha⁻¹. Application of half or one-third of total fertilizer N at stem elongation improved grain yield and grain protein content with respect to applications at sowing alone or at both sowing and tillering. Increased N rates led to a considerable increase in W values and to a reduction in the P/L ratio, thus improving dough balance, with a negative effect on the gluten index. Leaf application of N at ear emergence only affected grain protein content and the W index. Soil or leaf application of S had no effect on protein quality indices. The response of grain yield and grain protein content to fertilizer N differed from that reported for temperate climates.     

Anti-Rhizoctonia solani activity by Desmos chinensis extracts and its mechanism of action

The objectives of this study were to investigate the mechanisms of action and to evaluate the potential application of Desmos chinensis extracts for controlling rice sheath blight. The dichloromethane extract from D. chinensis demonstrated high antifungal activity against Rhizoctonia solani. The extract was shown to have anti-R. solani activity with minimum inhibitory concentration (MIC) and minimum fungicidal concentration values ranging from 31.2 to 62.5 μg mL⁻¹ and from 62.5 to 500 μg mL⁻¹, respectively. Bioautography on thin-layer chromatography plates demonstrated antifungal activity of the extract with an R_f value of 0.33. A total of 7 compounds, 2 benzoate esters (benzyl benzoate and benzyl 2-hydroxybenzoate), 2 sesquiterpenoids (α-eudesmol and β-eudesmol), 1 aromatic alcohol (benzyl alcohol), 1 aromatic ketone (acetophenone) and 1 diterpenoid (phytol), were detected and identified using gas chromatography–mass spectrometry analysis. Electron micrographs confirmed the effects of the extract on morphological and ultrastructural alterations in the treated fungal cells. The micrographs of the mycelia treated with the extract at 4MIC illustrated aberrant morphology such as shrinkage, partial distortion and globular structures of different sizes along the surface of the mycelia. Damaging membranous structures including disruption of the cell membrane, partial loss of nuclear membranes, and depletion of hyphal cytoplasm and membranous organelles were observed. Foliar application of D. chinensis extract at a concentration of 2 mg mL⁻¹ on rice markedly decreased sheath blight severity. It was concluded that the application of D. chinensis extract can be used as a botanical fungicide to control rice sheath blight.     

Effects of soil water content and nitrogen supply on the productivity of Miscanthus × giganteus Greef et Deu. in a Mediterranean environment

Miscanthus × giganteus is one of the most promising biomass crops for non-food utilisation. Taking into account its area of origin (Far East), its temperature and rainfall requirements are not well satisfied in Mediterranean climate. For this purpose, a research was carried out with the aim of studying the adaptation of the species to the Mediterranean environment, and at analysing its ecophysiological and productive response to different soil water and nitrogen conditions. A split plot experimental design with three levels of irrigation (I₁, I₂ and I₃ at 25%, 50% and 100% of maximum evapotranspiration (ETm), respectively) and three levels of nitrogen fertilisation (0 kg ha⁻¹: N₀, 60 kg ha⁻¹: N₁ and 120 kg ha⁻¹: N₂ of nitrogen) were studied. The crop showed a high yield potential under well-watered conditions (up to 27 t ha⁻¹ of dry matter). M. × giganteus, in Mediterranean environment showed a high yield potential even in very limited water availability conditions (more than 14 t ha⁻¹ with a 25% ETm restoration). A responsiveness to nitrogen supply, with great yield increases when water was not limiting, was exhibited. Water use efficiency (WUE) achieved the highest values in limited soil water availability (between 4.51 and 4.83 g l⁻¹), whilst in non-limiting water conditions it decreased down to 2.56 and 3.49 g l⁻¹ (in the second and third year of experiment, respectively). Nitrogen use efficiency (NUE) decreased with the increase of water distributed (from 190.5 g g⁻¹ of I₀ to 173.2 g g⁻¹ of I₂); in relation to N fertilisation it did not change between the N fertilised treatments (N₁ and N₂), being much higher in the unfertilised control (177.1 g g⁻¹). Radiation use efficiency (NUE) progressively declined with the reduction of the N fertiliser level (1.05, 0.96 and 0.86 g d.m. MJ⁻¹, in 1994, and 0.92, 0.91 and 0.69 g d.m. MJ⁻¹, in 1995, for N₂, N₁ and N₀, respectively).     

Long-term effects of inorganic and organic fertilizer sources on yield and nutrient accumulation of lowland rice

Deceleration in rice (Oryza sativa L.) yield over time under fixed management conditions is a concern for countries like Bangladesh, where rice is the primary source of calories for the human population. Field experiments were conducted from 1990 to 1999 on a Chhiata clay loam soil (Hyperthermic Vertic Endoaquept) in Bangladesh, to determine the effect of different doses of chemical fertilizers alone or in combination with cow dung (CD) and rice husk ash (ash) on yield of lowland rice. Two rice crops—dry season rice (December–May) and wet season rice (July–November) were grown in each year. Six treatments—absolute control (T₁), one-third of recommended fertilizer doses (T₂), two-thirds of recommended fertilizer doses (T₃), full doses of recommended fertilizers (T₄), T₂+5 t CD and 2.5 t ash ha⁻¹ (T₅) and T₃+5 t CD and 2.5 t ash ha⁻¹ (T₆) were compared. The CD and ash were applied on dry season rice only. The 10-year mean grain yield of rice with T₁ was 5.33 t ha⁻¹ per year, while the yield with T₂ was 6.86 t ha⁻¹ per year. Increased fertilizer doses with T₃ increased the grain yield to 8.07 t ha⁻¹ per year, while the application of recommended chemical fertilizer doses (T₄) gave 8.87 t ha⁻¹ per year. The application of CD and ash (T₅ and T₆) increased rice yield by about 1 t ha⁻¹ per year over that obtained with chemical fertilizer alone (T₂ and T₃, respectively). Over 10 years, the grain yield trend with the control plots was negative, but not significantly, both in the dry and wet seasons. Under T₃ through T₆, the yield trend was significantly positive in the dry season, but no significant trend was observed in the wet season. The treatments, which showed positive yield trend, also showed positive total P uptake trend. Positive yield trends were attributed to the increasing P supplying power of the soil.     

Quality characteristics of Burley tobacco irrigated with saline water

The effect of irrigation with saline water on quality of Burley tobacco (cv. C 104) was investigated in Southern Italy over four consecutive years. A rainfed control (RC) was compared with treatments irrigated with volumes equal to crop evapotranspiration of saline waters at 0.5 (NW), 2.5 (SW₁), 5 (SW₂) and 10 (SW₃) dS m⁻¹ electrical conductivity (EC_w). In 2000 and 2001 an additional salinity treatment (15 dS m⁻¹ EC_w) was included (SW₄). The amounts of Cl⁻ added to the soil by irrigation ranged from 36.3 kg ha⁻¹ (good quality water in 1999) to 16.2 Mg ha⁻¹ (saline water at 15 dS m⁻¹ EC_w in 2000). Saline irrigation did not affect yield and yield components of cured leaves. In 1998 and 1999 the filling power of Burley tobacco did not change significantly with increasing salinity of the irrigation water. In 2000 and 2001 the filling power of SW₂, SW₃ and SW₄ treatments was significantly less than that of NW. The Cl⁻ content of tobacco grown with SW₂ was significantly greater than that grown with NW and there were no differences between SW₁ through SW₄ treatments. The filling power and the leaf Cl⁻ content were inversely related to the amount of Cl⁻ applied in the range between 40.3 kg ha⁻¹ and 5.1 Mg ha⁻¹. The filling power decreased and Cl⁻ increased up to the SW₂ treatment; beyond that level neither Cl⁻ nor filling power changed in response to increasing amounts of Cl⁻ applied. The leaf alkaloid content was unaffected by salinity. Total N was unaffected by either the growing season or the saline treatments. Cigarettes obtained from saline treatments did not burn during the smoking test in 1998. In 1999 cigarettes made from SW₁ and SW₂ did burn, but those from SW₃ did not. In 2000 and 2001 the smoking test was performed only on commercial blends containing 10 or 30% of cut tobacco from saline treatments and both blends burned similarly to cigarettes made entirely from tobacco grown under non-saline conditions. In conclusion, quality of Burley tobacco was unaffected by irrigation with saline water at 2.5 dS m⁻¹ and the inhibitory effect of salinity on burning properties could be overcome by appropriate mixture in commercial blends.     

Effect of nitrogen supply on crop conductance,water- and radiation-use efficiency of wheat

Water-use efficiency (WUE_DM) is directly related to radiation-use efficiency (RUE) and inversely related to crop conductance (g_c). We propose that reduced WUE_DM caused by shortage of nitrogen results from a reduction in RUE proportionally greater than the fall in conductance. This hypothesis was tested in irrigated wheat crops grown with contrasting nitrogen supply; treatments were 0, 80 and 120 kg N ha⁻¹ in 1998 and 0, 80, 120 and 160 kg N ha⁻¹ in 1999. We measured shoot dry matter, yield, intercepted solar radiation and soil water balance components. From these measurements, we derived actual evapotranspiration (ET), soil evaporation and transpiration, WUE_DM (slope of the regression between dry matter and ET), WUE_Y (ratio between grain yield and ET), RUE (slope of the regression between dry matter and intercepted radiation), and g_c (slope of the regression between transpiration and intercepted radiation). Yield increased from 2.3 in unfertilised to an average 4.7 t ha⁻¹ in fertilised crops, seasonal ET from 311 to 387 mm, WUE_DM from 23 to 37 kg ha⁻¹ mm⁻¹, WUE_Y from 7.6 to 12.4 kg ha⁻¹ mm⁻¹, RUE from 0.85 to 1.07 g MJ⁻¹, while the fraction of ET accounted for soil evaporation decreased from 0.20 to 0.11. In agreement with our hypothesis, RUE accounted for 60% of the variation in WUE_DM, whereas crop conductance was largely unaffected by nitrogen supply. A greater fraction of evapotranspiration lost as soil evaporation also contributed to the lower WUE_DM of unfertilised crops.     

Effects of varying nitrogen doses on yield,yield components and artemisinin content of Artemisia annua L.

Artemisia annua L. is an aromatic-antibacterial herb that destroys malarial parasites, lowers fevers and checks bleeding, and of which the secondary compound of interest is artemisinin. The objective of the present study was to determine yield, yield components and artemisinin content of A. annua L. grown under four nitrogen applications (0, 40, 80 and 120 kg ha⁻¹) in the Çukurova region of Turkey in 2004 and 2005. Field trials were conducted at Çukurova University, Agricultural Faculty Field Crops Department. In the study, plant height, number of branches, fresh herbage yield, dry herbage yield, fresh leaf yield, dry leaf yield, essential oil content and artemisinin content (by high performance liquid chromatography, HPLC) were examined. By analysis of variance, nitrogen doses had no any statistical effect on the traits investigated except for artemisinin content. Artemisinin content of the dried leaves were significantly affected by nitrogen applications, which varied from 6.32 to 27.50 mg 100 g⁻¹. Contents were from 120 and 80 kg ha⁻¹ nitrogen for the years of 2004 and 2005, respectively.     

Interspecific competition,N use and interference with weeds in pea–barley intercropping

Field pea (Pisum sativum L.) and spring barley (Hordeum vulgare L.) were intercropped and sole cropped to compare the effects of crop diversity on productivity and use of N sources on a soil with a high weed pressure. ¹⁵N enrichment techniques were used to determine the pea–barley–weed-N dynamics. The pea–barley intercrop yielded 4.6 t grain ha⁻¹, which was significantly greater than the yields of pea and barley in sole cropping. Calculation of land equivalent ratios showed that plant growth factors were used from 25 to 38% more efficiently by the intercrop than by the sole crops. Barley sole crops accumulated 65 kg soil N ha⁻¹ in aboveground plant parts, which was similar to 73 kg soil N ha⁻¹ in the pea–barley intercrop and significantly greater than 15 kg soil N ha⁻¹ in the pea sole crop. The weeds accumulated 57 kg soil N ha⁻¹ in aboveground plant parts during the growing season in the pea sole crops. Intercropped barley accumulated 71 kg N ha⁻¹. Pea relied on N₂ fixation with 90–95% of aboveground N accumulation derived from N₂ fixation independent of cropping system. Pea grown in intercrop with barley instead of sole crop had greater competitive ability towards weeds and soil inorganic N was consequently used for barley grain production instead of weed biomass. There was no indication of a greater inorganic N content after pea compared to barley or pea–barley. However, 46 days after emergence there was about 30 kg N ha⁻¹ inorganic N more under the pea sole crop than under the other two crops. Such greater inorganic N levels during early growth phases was assumed to induce aggressive weed populations and interspecific competition. Pea–barley intercropping seems to be a promising practice of protein production in cropping systems with high weed pressures and low levels of available N.     

Rice straw mulching and nitrogen response of no-till wheat following rice in Bangladesh

Wheat (Triticum aestivum L.) cultivation in no-till soil of a postrice harvest field utilizes residual soil moisture and reduces the time period from rice harvest to wheat seeding in intensive rice-wheat cropping systems. Some of the major constraints in no-till wheat production are high weed infestation, poor stand establishment due to rapid drying of topsoil and low nitrogen use efficiency (NUE). A field experiment was conducted at the research farm of the Wheat Research Centre, Dinajpur, Bangladesh, for two consecutive years to overcome those constraints, to evaluate rice straw as mulch, and to determine the optimum application rate of nitrogen (N) for no-till wheat. The treatments included 12 factorial combinations of three levels of mulching: no mulch (M₀), surface application of rice straw mulch at 4.0 Mg ha⁻¹ that was withdrawn at 20 days after sowing (M₁), the same level of mulch as M₁ but allowed to be retained on the soil surface (M₂), and four nitrogen levels (control 80, 120 and 160 kg ha⁻¹). Rice straw mulching had a significant effect on conserving initial soil moisture and reducing weed growth. Root length density and root weight density of wheat were positively influenced both by straw mulching and N levels. N uptake and apparent nitrogen recovery of applied N fertilizer were higher in mulch treatments M₁ and M₂ as compared to M₀. Also mulch treatment of M₁ and M₂ were equally effective at conserving soil moisture, suppressing growth of weed flora, promoting root development and thereby improved grain yield of no-till wheat. N application of 120 kg ha⁻¹ with straw mulch was found to be suitable for no-till wheat in experimental field condition.     

Maximizing yields in rice–groundnut cropping sequence through integrated nutrient management

Integrated use of organic and inorganic fertilizers can improve crop productivity and sustain soil health and fertility. The present research was conducted to study the effects of application of green manures [sesbania (Sesbania aculeate Poiret) and crotalaria (Crotalaria juncea L.)] and farmyard manure on productivity of rice (Oryza sativa L.) and its residual effects on subsequent groundnut (Arachis hypogaea L.) crop. Rice and groundnut crops were grown in sequence during rainy and post-rainy seasons with and without green manure in combination with different fertilizer and spacing treatments under irrigated conditions. The results showed that application of green manures sesbania and crotalaria at 10 t ha⁻¹ to rice compared to no green manure application significantly increased grain yield of rice by 1.6 and 1.1 t ha⁻¹, and pod yields of groundnut crop succeeding rice by 0.25 and 0.16 t ha⁻¹, respectively. There was no significant difference between the application of crotalaria or farmyard manure at 10 t ha⁻¹ on grain yields of rice, but pod yields of subsequent groundnut crop were greater with application of green manure. There was no significant effect of different spacing 20×15,15×15,15×10 cm² (333 000; 444 000; 666 000 plant ha⁻¹, respectively) on grain yield of rice. Pod yields of groundnut were significantly greater with closer spacing 15×15 cm² (444 000 plants ha⁻¹) as compared to spacing of 30×10 cm² (333 000 plants ha⁻¹). Maximum grain of rice was obtained by application of 120:26:37 kg NPK ha⁻¹ in combination with green manures, whereas maximum pod yield of groundnut was obtained by residual effect of green manure applied to rice and application of 30:26:33 kg NPK ha⁻¹ in combination with gypsum applied to groundnut crop.     

Intra-specific competition in maize: early establishment of hierarchies among plants affects final kernel set

Reduced plant biomass and increased plant-to-plant variability are expected responses to crowding in monocultures, but the underlying processes that control the onset of interplant interference and the establishment of hierarchies among plants within a stand are poorly understood. We tested the hypothesis that early determined plant types (i.e. dominant and dominated individuals) are the cause of the large variability in final kernel number per plant (KNP) usually observed at low values of plant growth rate (PGR) around silking in maize (Zea mays L.). Two hybrids (DK696 and Exp980) of contrasting response to crowding were cropped at different stand densities (6, 9 and 12 plants m⁻²), row spacings (0.35 and 0.70 m), and water regimes (rainfed and irrigated) during 1999/2000 and 2001/2002 in Argentina. The onset of interplant competition started very early during the cycle, and significant differences (P<0.05) in estimated plant biomass between stand densities were detected as soon as V_4–6 (DK696) and V_6–7 (Exp980). Plant population and row spacing treatments did not modify the onset of the hierarchical growth among plants, but did affect (P<0.02–0.08) the dynamic of the process. For both hybrids, the rate of change in relative growth between plant types was larger at 9 and 12 plants m⁻² (ca. 0.12 g/g per 100 °C day) than at 6 plants m⁻² (ca. 0.07 g/g per 100 °C day). For all treatments, the largest difference in estimated shoot biomass between plant types took place between 350 (V₇) and 750 °C day (V₁₃) from sowing, and remained constant from V₁₃ onwards. Dominant plants always had more kernels per plant (P<0.05) than the dominated ones, but differences between plant types in PGR around silking were significant (P<0.05) only at 12 plants m⁻². Our research confirmed the significant (P<0.01) curvilinear response of KNP to PGR around silking, but also determined a differential response between plant types: the mean of residual values were significantly (P<0.01) larger for dominant than for dominated individuals. Estimated ear biomass at the onset of active kernel growth (R₃) reflected the variation in KNP (r²≥0.62), and was significantly (P<0.01) related to estimated plant biomass at the start of active ear growth (ca. V₁₃). This response suggested that the physiological state of each plant at the beginning of the critical period had conditioned its reproductive fate. This early effect of plant type on final KNP seemed to be exerted through current assimilate partitioning during the critical period.