Ochratoxin a contents in wine: comparison of organically and conventionally produced products

Ochratoxin A (OTA) content was determined in 44 organically and conventionally produced wines originating from different geographical regions. Wine samples were extracted using a series of C18 and mixed-bed solid-phase cartridges and analyzed by HPLC with fluorescence detection. The identity of the mycotoxin was confirmed using liquid chromatography-tandem mass spectrometry. Recoveries were in excess of 90%, intraday precisions were better than 6%, and the interday variation was 15%. Limit of detection was 0.05 microg/L (HPLC). All sampled wines contained OTA below the level permitted by the European Union of 2 microg/L, ranging from not detectable (nd) to 0.75 microg/L for red wines (n = 26), from nd to 0.092 microg/L for rosé wines (n = 2), and from nd to 0.22 microg/L for white wines (n = 16). The concentration of OTA in organically produced wines (nd to 0.72 microg/L, median 0.092 microg/L, n = 19) was not significantly different from that in conventional products (nd to 0.75 microg/L, median 0.066 microg/L, n = 25) as assessed by a Mann-Whitney statistical test (p = 0.54).     

Listeria methods development research at the Eastern Regional Research Center, U.S. Department of Agriculture

Listeria methods research at the U.S. Department of Agriculture, Eastern Regional Research Center, has concentrated on 2 areas during the past year. The first was development of techniques for assessing isolation methods for their ability to detect sublethally stressed cells. It appears that a number of widely used media do not accurately detect Listeria that have been injured by thermal processing or acidification. The second was development of improved plating media. One, modified Vogel-Johnson agar, shows promise; it is highly selective and quantitative, and eliminates the need to select colonies on the basis of a blue color when illuminated with reflected light.     

Forest management and biomass in the U.S.A.

There are a variety of opportunities to change land and forest management and, at the same time, create a positive impact on the current use of fossil energy. To the extent that these opportunities can be captured, they address the root cause of greenhouse warming-fossil fuel emissions-while, at the same time, improving economic opportunities, ecosystem productivity, and environmental conditions over broad areas. The need for better markets to absorb biomass energy, plus research to make biomass conversion more efficient, is probably the most important deterrent to achieving these possibilities.     

A comparison of mineral-magnetic and distributed RUSLE modeling in the assessment of soil loss on a southeastern U.S. cropland

As geospatial technologies increasingly figure into resource management activities, there is a corresponding need to provide commensurately detailed high resolution spatial data. This study addresses the capacity of rapidly and cheaply acquired mineral-magnetic data to provide detailed spatially distributed assessments of long-term cumulative soil loss from agricultural fields. Model output from a simple distributed implementation of the Revised Universal Soil Loss Equation (RUSLE) and from a field-data-oriented soil magnetism-based erosion model are compared for a small Alabama (USA) farm lot. An undisturbed reference soil toposequence is used as input to the magnetism model, in contrast with earlier studies that relied on a single reference soil profile. Results from this procedure, while likely to be more dependable, proved primarily to further emphasize spatial patterns noted in prior studies. In addition, the use of a toposequence decreased the area over which RUSLE and magnetism models were in agreement. RUSLE underpredicted denudation relative to magnetism-model results over upper slopes, and overpredicted it on lower slopes. The locations of former access roads may explain underprediction on the upper slopes. The differences between the two method outcomes are discussed with regard to the potential for spatial variability in parent materials, the efficacies of non-fluvial soil redistribution processes, and the availability of detailed land use records for the 100+ years of agricultural activities at the site.     

美国稻田和反刍动物的甲烷排放

本文为考察报告,叙述了美国水稻和畜牧业生产情况,美国对全球稻田和反刍动物排放甲烷量的估计,以及美国对此农业源甲烷排放的研究情况。     

Factors associated with the prevalence of non-ROPS tractors on farms in the U.S

Rollover protective structures (ROPS) are an effective engineering control known to prevent tractor overturn deaths, the leading cause of occupational fatalities for farmers and farm workers in the U.S. However, the use of ROPS is known to vary greatly from farm to farm. A national sample of 11,458 farm operators from the 2004 Occupational Injury Surveillance of Production Agriculture (OISPA) survey was used to assess the association between the prevalence of ROPS and ten farm operator and farm demographic variables using logistic regression. The variable were: operator's age, operator's sex, operator's education, farm sales, full- or part-time farming, acreage, type of operation, number of hired workers, number of injuries, and region. All ten variables were found to have significant associations with the prevalence of non-ROPS tractors on farms in the univariate logistic regressions. For the multivariate model, all variables except for the sex of the farm operator remained significant. Farms with less than three adult injuries, no hired workers, less than 300 acres in size, a Midwest location, and a primary farm type of tobacco, fruit and nuts, dairy, or poultry and eggs all had adjusted odds ratios of 2 or greater. Increasing the prevalence of ROPS-equipped tractors is essential for reducing the leading cause of death on farms, tractor overturns. Economic factors play a major role in the prevalence and distribution of non-ROPS tractors on farms. The identified associations can be used to effectively target areas of the U.S. for ROPS promotion activities.     

Mercury in vegetation and lake sediments from the U. S. arctic

Global atmospheric concentrations of mercury (Hg) appear to be increasing and with it the potential for ecosystem exposure and ecological effects. From 1990 to 1993 we examined U. S. arctic ecosystems over a broad spatial scale to develop baseline information on current concentrations of trace elements, heavy metals (including Hg), persistent organic compounds, and radionuclides in various components of the terrestrial and freshwater biosphere. Matrices reported here include, vegetation (lichens and mosses) and lake sediments. Total Hg in two lichen and two moss species from Alaska were generally low (0.02–0.112 μg/g dw), compared to reported values from other arctic locations and showed a statistically significant negative relationship between total Hg content and distance from the marine coastline.²¹⁰Pb dated sediment cores indicated that average preindustrial total Hg accumulation rates were over four times greater in arctic Schrader lake than in subarctic Wonder Lake. Both lakes indicated a small increase (5–8%) in total Hg flux to the sediments during the last 145 years, much smaller than similar increases in total mercury for lakes in the north central U. S. The likely source of recent increases in Hg in these Alaskan ecosystems is long range atmospheric transport. While we can detect increases in mercury in lake sediments likely due to anthropogenic activities, values are low and there appears to be no immediate threat to terrestrial environments and inland freshwaters of arctic Alaska from long range atmospheric transport and deposition of Hg.     

Evaluation of isoflavone aglycon and glycoside distribution in soy plants and soybeans by fast column high-performance liquid chromatography coupled with a diode-array detector

An ultrafast HPLC/UV-vis DAD method working at 254 nm was applied for the determination of isoflavone aglycons and glycosides (genistin, genistein, daidzein, daidzin, glycitin, glycitein, ononin, formononetin, sissotrin, and biochanin A) in roots, stems, leaves, and soy pods of soy plants and in soybeans of five varieties (Korada, Quito, Rita, OAC Erin, and OAC Vison). An Atlantis dC18 ultrafast RP chromatographic column (20 mm x 2.1 mm, 3 microm particle size) was applied for separation of the isoflavone aglycons and glycosides. A flow rate of the mobile phase (0.1% (v/v) acetic acid, pH 3.75-solvent A and methanol-solvent B) was 0.35 mL min(-1), and the column temperature was 36 degrees C. A linear gradient profile from 13 up to 22% B (v/v) from zero to 2.5 min, up to 30% B to 3.21 min, up to 35% B to 4 min, up to 40% B to 4.5 min, up to 50% B to 5.14 min, and followed by negative gradient up to 13% B to 7.71 min was used. The absolute limits of detection per sample injection (5 microL) were the highest for biochanin A (166.2 fmol) and the lowest for genistin (17.0 fmol), respectively. An accelerated solvent extraction (ASE) in combination with sonication was applied for isolation of biologically active compounds. A solid-phase extraction procedure was used to purify the extracts in the case of analysis of soy plants parts. The recoveries of 96-106% were obtained for the different concentrations of the isoflavone aglycons and glycosides and the different matrixes (overall RSDs 2-9%). The highest isoflavone concentrations were found in roots (12.5 microg g(-1) dry weight), while the amounts were about 3-1100 microg g(-1) fresh weight in different varieties of soybeans.     

Effect of heat damage in an autoclave on the reactive lysine contents of soy products and corn distillers dried grains with solubles. Use of the results to check on lysine damage in common qualities of these ingredients

The suitability of the homoarginine reaction for determining the reactive lysine in soy products and corn distillers dried grain with solubles (DDGS) was tested. For this purpose, some batches were subjected to deliberate heat damage for up to 30 min in an autoclave with 135 degrees C hot steam, and the samples were analyzed for total lysine and reactive lysine. In addition, 84 samples of common soy and 80 samples of corn DDGS were tested for their content of total and reactive lysine, and the contents were compared with those of the autoclave tests. For soy products conclusive results were obtained. In the case of heat treatment, both total lysine and reactive lysine decrease, but the latter is clearly a more sensitive indicator of lysine damage. Most normal products are quite similar, with toasting-induced damage to reactive lysine of ca. 15% compared to untoasted beans. The cause of the constantly occurring residual lysine after guanidination and the poorer reaction balance in the case of damage were explained. For common DDGS samples, however, less favorable results were obtained. Reactive and total lysine decreased almost in parallel due to heat damage, showing a great gap between them. Results showed indeed that variation of total and reactive lysine in DDGS is high, proving that its production conditions are not yet optimal for a feed ingredient.     

Sulfur retention at intensively studied sites in the U.S. and Canada

We compiled and summarized current literature on S input/output budgets for intensively studied sites and soil plots in the U.S. and Canada and found S retention to be related to both soil order and extent of the last glaciation (Wisconsinan). Zero net retention is associated with Spodosols and was found only at sites north of the limit of Wisconsinan glaciation. Sites south of the limit of glaciation appear to be retaining from 20 to 90% of incoming S. These findings support the hypothesis that there exist regional variations in S retention in North America. Such variations are important in determining and predicting effects of acidic deposition on surface water chemistry.     

Use of a simplified HPLC-UV analysis for soyasaponin B determination: study of saponin and isoflavone variability in soybean cultivars and soy-based health food products

Soyasaponins are phytochemicals of major interest for health. Their identification and quantification remain difficult owing to the large number of structural isomers in soybeans and the lack of stable standards. In this study, a rapid method using high performance liquid chromatography (HPLC) using a UV detector (205 nm) was developed to identify and quantify soyasaponins belonging to group B and compare them with isoflavones in different soy materials. 2,3-Dihydro-2,5-dihydroxy-6-methyl-4H-pyran-4-one (DDMP)-conjugated soyasaponins were determined using external calibration or a molecular mass ratio after alkaline hydrolysis to cleave their DDMP moieties. The detection limit of soyasaponin I, used as a reference molecule to simplify the analysis, was 0.065 micromol/g. Soyasaponin contents in seven soybean varieties ranged from 13.20 to 42.40 micromol/g in the germ and from 2.76 to 6.43 micromol/g in the cotyledons. The within-day and between-days variation coefficients did not exceed 7.9 and 9.0%, respectively, for the major soyasaponins. Soyasaponin B quantification in different soy-based health supplements was reported along with measurements of their isoflavone content to provide information on the variability of these bioactive compounds among different types of soy food materials.     

Iron deficiency of soybean in the North Central U.S. and associated soil properties

Despite extensive research and variety screening efforts, iron deficiency chlorosis is a common, yield-limiting condition for soybean [Glycine max (L.) Merr.] grown in areas with high pH, calcareous soils. In the North Central U.S., total land area where soybean is grown on high pH soils is approximately 1.8 million ha, with iron deficiency responsible for an estimated loss in soybean grain production of 340,000 Mg at a value of $820 million per annum. This is a significant increase in the extent of iron deficiency problems relative to the past because of an expansion of soybean production in the region. Soil properties associated with iron deficiency in this region compared to adjacent areas without iron deficiency include greater soil moisture content and concentrations of soluble salts, carbonates, and DTPA-Cr, and lesser concentrations of DTPA-Fe, Mn, Ni, and Cd. Iron deficiency occurs due to multiple stresses and not simply to limited available iron. Biotic and management factors such as pests and diseases, symbiotic nitrogen fixation, seeding rate, and herbicide application also interact with iron deficiency in the field. There is a need to better match varieties to the specific soil and environmental conditions to which they are adapted.     

Human-altered and human-transported (HAHT) soils in the U.S. soil classification system

ABSTRACT

Human-altered and human-transported (HAHT) soils are widespread across the globe and are concentrated near where people live and work. Although some of the HAHT soils are significant because they can be hazardous to human, animal, and plant health, most are not mapped or classified to the same extent as agricultural soils. The purpose of this article is to discuss the occurrence, types, and importance of HAHT soils and to document the historical and proposed classification of HAHT soils in Soil Taxonomy. There are two main forms of materials that define HAHT soils: human-altered soils formed in human-altered materials (HAM) from the soil surface to 50 cm (or to bedrock if shallower) or more and human-transported soils formed in human-transported materials (HTM) from the soil surface to 50 cm (or to bedrock if shallower) or more. The HAHT soils mainly occur in urban areas, transportation corridors, mined lands, landfills, filled shallow water, and agricultural areas on anthropogenic landforms. Hazards include danger from radioactivity, pollution, content of hazardous artifacts, or presence on unstable landforms that may fail during heavy rains or earthquakes. The HAHT soils are extensive, and their extent is growing. In the past, few HAHT soils were described or classified adequately because the U.S. Soil Taxonomy system was established for agricultural and other naturally occurring soils. However, HAHT soils are now being recognized and classified in many soil classification systems at very high levels. A new soil order is proposed for U.S. Soil Taxonomy that would include the most obvious profoundly and intentionally altered HAHT soils. A discussion and justification is given for an unofficial proposal. Input will be collected from international groups of scientists, and modifications of the unofficial proposal are expected. The long-term result of establishing a new soil order will be to enable proper classification, allocation, and mapping of HAHT soils worldwide.     

Survey of mycotoxins in U.S. distiller's dried grains with solubles from 2009 to 2011

Distiller's dried grains with solubles (DDGS) is a major coproduct of the fuel-ethanol industry and is becoming a popular low-cost ingredient for animal feed. Uncertainties regarding the risk factors in DDGS, such as level of mycotoxins, could limit its application in the animal feed industry. To provide a scientifically sound assessment of the prevalence and levels of mycotoxins in U.S. DDGS, we measured aflatoxins, deoxynivalenol, fumonisins, T-2 toxin, and zearalenone in 67 DDGS samples collected from 8 ethanol plants in the midwestern United States from 2009 to 2011. Among the five mycotoxins, deoxynivalenol was the main focus of the study because the crop year of 2009 was favorable for deoxynivalenol occurrence in corn. We learned that no more than 12% of the samples contained deoxynivalenol levels higher than the minimum advisory level for use in animal feed provided by the U.S. FDA, and the deoxynivalenol levels in all DDGS collected in 2011 were <2 mg/kg. Besides, intensive study showed that the enrichment of deoxynivalenol from contaminated corn to DDGS was about 3.5 times. With regard to the other mycotoxins in DDGS, the study suggested that (1) almost none of the DDGS samples produced in 2010 contained detectable aflatoxins and the highest level of aflatoxins in DDGS was 5.7 μg/kg; (2) no more than 6% of the samples contained fumonisin levels higher than the guidance level for feeding equids and rabbits provided by the U.S. FDA; (3) none of the samples contained T-2 higher than the detection limit; (4) most samples contained zearalenone levels between 100 and 300 μg/kg. This study was based on representative DDGS samples from the U.S. ethanol industry, and the data were collected using state-of-the-art analytical methodology. This study provided a comprehensive and scientifically sound assessment of the occurrence and levels of mycotoxins in DDGS produced from 2009 to early 2011 by the U.S. ethanol industry.     

面向21世纪的美国农业工程教育

由传统的农业工程专业向生物工程专业发展已经成为美国的发展趋势，进而怎样建立生物工程专业也已成为研究的热点。该文介绍了这种发展的起因与可能性，生物工程专业建设的框架原则，它与农业工程专业的关系以及工程师与生物学家间的界接面。     

A comparison between wet and bulk deposition at an urban site in the U.K.

As a part of an ongoing investigation into urban acidic deposition in Greater Manchester, a wet-only collector was collocated with a bulk collector in the city centre of Manchester, one of 18 sites of an urban precipitation monitoring network. A comparison of data from these collocated bulk and wet-only collectors allowed estimates of the contribution of dry deposition to the bulk collector to be made. Dry deposition was found to contribute between 15 and 17% to elevated deposition and concentrations of non marine sulphate, nitrate and ammonium in the bulk collector. By a statistical analysis between ion concentrations with gas concentrations and an evaluation of the available literature, the form of the dry deposited material was inferred. The contribution of dry deposited Ca²⁺ to concentration and deposition in the bulk collector was found to be 46%. Calcium species are suggested as being those which reduce acidity most. Statistical analyses revealed significant differences between concentrations of ions found in the bulk and wet-only collectors. An evaluation of the data from the collocated collectors has identified possible sampling artifacts introduced by the use of bulk collectors in urban areas.