Evaluation of enzyme-linked immunosorbent assay of cleanup for thin-layer chromatography of aflatoxin B1 in corn, peanuts, and peanut butter

A simple, rapid enzyme-linked immunoassay (ELISA) was used to evaluate the performance of each step (extraction, filtration, solvent partition, and silica gel column chromatography) of a solvent-efficient thin-layer chromatographic (TLC) method which is undergoing interlaboratory collaborative study for the determination of aflatoxin B1 in corn, raw peanuts, and peanut butter. The apparent average recoveries using the ELISA method were about 30 to 50% higher than those using the TLC method if only the amount of B1 added to the samples was used in the calculations. After the cross-reaction of the antibody with other aflatoxins added to the samples was considered, the amounts recovered approached the levels of aflatoxins added in all 3 commodities tested. With no cleanup treatment, ELISA recoveries at aflatoxin B1 levels above 7.5 ng/g were 84, 79, and 103% for corn, raw peanuts, and peanut butter, respectively. The coefficients of variation were between 5.2 and 25.2%. With each cleanup step in the TLC method, ELISA detected a progressive decrease in recovery from 150.5 to 105.3% (before correction for the presence of other aflatoxins) or from 93.5 to 65.4% (after correction for other aflatoxins) of B1 added to the samples. The ELISA data support the conclusion obtained from previous studies that cleanup treatments were not necessary in the ELISA. When large amounts of other aflatoxins are present, an understanding of the cross-reactivity of antibody with other aflatoxins in the ELISA is essential for final interpretation of the data.     

Visual and semiquantitative spectrophotometric ELISA screening method for aflatoxin B1 in corn and peanut products: follow-up collaborative study

A joint AOAC/IUPAC (International Union of Pure and Applied Chemistry) interlaboratory study of an enzyme-linked immunosorbent screening assay (ELISA) for aflatoxins was conducted in laboratories in Canada, France, Japan, The Netherlands, Switzerland, Tunisia, and the United States. Twelve raw and roasted peanut and corn portions containing various concentrations of natural aflatoxins and supplemented when appropriate with aflatoxin B1 were distributed to participating laboratories for testing. The assay is based on competition between an enzyme-conjugated aflatoxin B1 and (free) aflatoxins in the test sample for aflatoxin-specific antibodies coated onto interior surfaces of microtiter wells. After a wash step to remove all unbound aflatoxins, a substrate added to each well is catalyzed from a colorless to a blue solution by any bound enzyme-conjugated aflatoxin B1 present. The intensity of the color decreases as the amount of free aflatoxin B1 in the test portion increases. Final determination of aflatoxin concentrations can be made by either visual comparison with standard solutions or spectrophotometric comparisons (at 650 nm) to knowns. Overall correlation was good between ELISA and thin-layer chromatographic results for corn and roasted peanut products, with 93 and 98% correct responses for visual and instrumental determinations, respectively. For instrumental determinations of aflatoxin in corn and roasted peanuts in the less than or equal to 20 ng/g range, the relative standard deviations for repeatability (RSDr) were 14.9 and 41.4%, respectively, and the relative standard deviations for reproducibility (RSDR) were 45.7 and 43.5%, respectively. For instrumental determination of greater than 20 ng/g, the respective RSDr and RSDR values were 19.4 and 52.7% for corn and 23.3 and 23.3% for roasted peanuts.(ABSTRACT TRUNCATED AT 250 WORDS)     

Rapid thin layer chromatographic method for determining aflatoxin B1, ochratoxin A, and zearalenone in corn

A multimycotoxin thin layer chromatographic method is described for the analysis of corn. Aflatoxins are extracted from the samples with acetonitrile-water, and sodium bicarbonate is added to separate the acidic ochratoxin from zearalenone and aflatoxin B1. After chloroform extraction, 1N NaOH is added to separate zearalenone and aflatoxin B1. The separated mycotoxins are spotted on TLC plates, which are then examined under ultraviolet light. The following recoveries (%) were obtained for corn samples: aflatoxin B1 71, ochratoxin A 87, and zearalenone 85. The limits of detection for the respective mycotoxins were 2, 40, and 200 ppb.     

Enzyme-linked immunosorbent assay of aflatoxins B1, B2, and G1 in corn, cottonseed, peanuts, peanut butter, and poultry feed: collaborative study

A direct competitive enzyme-linked immunosorbent assay (ELISA) screening method for aflatoxins at 20 ng/g was studied by 12 collaborators. Test samples of peanut butter were extracted by blending with methanol-water-hexane (55 + 45 + 100) and heating the test extracts on a steam bath; test samples of the other commodities were extracted by blending with methanol-water (80 + 20). All test extracts were filtered and the filtrates were diluted with buffer to a final methanol concentration of less than 30%. Each diluted filtrate was applied to a cup containing a filter with immobilized polyclonal antibodies specific to aflatoxins B1, B2, and G1. Aflatoxin B1-peroxidase conjugate was added, the cup was washed with water, and a mixture of hydrogen peroxide and tetramethylbenzidine was added. The test sample was judged to contain greater than or equal to 20 ng aflatoxins/g when, after exactly 1 min, no color was observed on the filter; when a blue or gray color developed, the test sample was judged to contain less than 20 ng aflatoxins/g. All collaborators correctly identified naturally contaminated corn and raw peanut positive test samples. No false positives were found for controls containing less than 2 ng aflatoxins/g. The correct responses for positive test samples spiked at levels of 10, 20, and greater than or equal to 30 ng aflatoxins/g (the ratio of B1:B2:G1 was 10:1:3) were 52, 86, and 96%, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)     

Synthesis of haptens and conjugates for ELISA of glycitein: development and validation of an immunological test

Two carboxylic acid haptens of glycitein were synthesized, with a spacer arm at the C2 position. They differed in the length of the spacer arm, with the length of the spacer arms being three or four carbon atoms, and were named Delta3-glycitein and Delta4-glycitein haptens, respectively. The different haptens were coupled to bovine serum albumin (BSA), and the coupling efficiency was assessed by MALDI mass spectrometry. Polyclonal antibodies were generated against the BSA conjugates. An additional conjugate of Delta4-glycitein hapten was generated with swine thyroglobulin (Thyr). Enzyme-linked immunosorbent assays (ELISAs) based on the competition between free glycitein and Delta4-glycitein-Thyr conjugates for specific antibodies were developed. The IC50 of the standard curves was 15.6 ng mL(-1) with anti-Delta3-glycitein and 62.5 ng mL(-1) with anti-Delta4-glycitein, that is, 10.9 and 44 pmol/well, respectively. With the Delta3-glycitein antibody, interassay and intra-assay variations were 12.2 and 11.5%, respectively. Specificity tests did not show any significant cross-reaction with any other soy isoflavone. This specificity is not influenced by the length of the spacer arm. The assay was validated by measurements performed on plasma samples as well as on soy-based foodstuffs and on soy-based food supplements.     

Liquid chromatographic method for determination of aflatoxins B1, B2, G1, and G2 in corn and peanut products: collaborative study

A collaborative study of a liquid chromatographic method for the determination of aflatoxins B1, B2, G1, and G2 was conducted in laboratories located in the United States, Canada, South Africa, and Switzerland. Twenty-one artificially contaminated raw peanuts, peanut butter, and corn samples containing varying amounts of aflatoxins B1, B2, G1, and G2 were distributed to participating laboratories. The test portion was extracted with methanol-0.1N HCl (4 + 1), filtered, defatted with hexane, and then partitioned with methylene chloride. The concentrated extract was passed through a silica gel column. Aflatoxins B1 and G1 were derivatized with trifluoroacetic acid, and the individual aflatoxins were determined by reverse-phase liquid chromatography with fluorescence detection. Statistical analysis of the data was performed to determine or confirm outliers, and to compute repeatability and reproducibility of the method. For corn, relative standard deviations for repeatability (RSDr) for aflatoxin B1 ranged from 27.2 to 8.3% for contamination levels from 5 through 50 ng/g. For raw peanuts and peanut butter, RSDr values for aflatoxin B1 were 35.0 to 41.2% and 11.2 to 19.1%, respectively, for contamination levels from 5 through 25 ng/g. RSDr values for aflatoxins B2, G1, and G2 were similar. Relative standard deviations for reproducibility (RSDr) for aflatoxin B1 ranged from 15.8 to 38.4%, 24.4 to 33.4%, and 43.9 to 54.0% for corn, peanut butter, and raw peanuts, respectively. The method has been adopted official first action for the determination of aflatoxins B1, B2, G1, and G2 in peanut butter and corn at concentrations greater than or equal to 13 ng total aflatoxins/g.     

Immunoaffinity column coupled with solution fluorometry or liquid chromatography postcolumn derivatization for determination of aflatoxins in corn, peanuts, and peanut butter: collaborative study

An AOAC/IUPAC (International Union of Pure and Applied Chemistry) collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column for the determination of aflatoxin. The test portion is extracted with methanol-water (7 + 3), filtered, diluted to less than 30% methanol with water, and applied to the affinity column. The column is washed with water and the concentrated aflatoxins are eluted with methanol. Total aflatoxins are determined by solution fluorometry with bromine (SFB), and individual toxins are determined by reverse-phase liquid chromatography with postcolumn derivatization with iodine (PCD). Corn naturally contaminated with aflatoxins, and peanuts, peanut butter, and corn containing added aflatoxins (B1:B2:G1:G2 = 7:1:3:1) were sent to 24 collaborators in the United States, France, Canada, and the Republic of South Africa. Twelve collaborators used the SFB method, 9 used the PCD method, and 3 used both SFB and PCD methods. Twenty collaborators completed the study (10 used the SFB method, 7 used the PCD method, and 3 used both SFB and PCD methods). Test portions were spiked at 10, 20, and 30 ng/g. For SFB analyses, recoveries of total aflatoxins were 123, 105, and 107%, respectively; the relative standard deviation for repeatability (RSDr) ranged from 11.75 to 16.57%, and the relative standard deviation for reproducibility (RSDR) ranged from 10.97 to 33.09%. For PCD analyses, recoveries were 81, 81, and 83%, respectively; the RSDr ranged from 5.20 to 17.22%, and the RSDR ranged from 4.68 to 50.77%. The RSDr for aflatoxins B1 and G1 for spiked test portions ranged from 5.45 to 23.55%, and the RSDR ranged from 4.21 to 57.28%.(ABSTRACT TRUNCATED AT 250 WORDS)     

Monoclonal antibody-based enzyme linked immunosorbent assay of aflatoxin B1, T-2 toxin, and ochratoxin A in barley

Aflatoxin B1 (B1), T-2 toxin (T2), and ochratoxin A (OA) were assayed in a single extract from barley grain by using competitive enzyme linked immunosorbent assays (ELISAs) with monoclonal antibodies. B1 and T2 monoclonal antibodies were conjugated to horseradish peroxidase for direct competitive ELISA while an indirect competitive ELISA was used for OA determination. The competitive ELISA detected 0.1 ng/mL of B1, 10 ng/mL of T2, or 1 ng/mL of OA. Acetonitrile-0.5% KCl-6% H2SO4 (89 + 10 + 1) extracts of barley grain either were diluted 1:10 for direct assay or were subjected to a simple liquid-liquid cleanup procedure to concentrate the extract 10:1 before assay. For cleanup, water was added to the acetonitrile extract to partition water-soluble interfering substances, and then the mycotoxins were re-extracted with chloroform. The chloroform extract was evaporated to dryness and redissolved in Tris HCl buffer for ELISA. The mean recoveries from barley spiked with 4-60 ng/g of B1, 50-5000 ng/g of T2, and 5-500 ng/g of OA were, respectively, 93.8, 80.6, and 95.8%. The mean within-assay, inter-assay, and subsample coefficients of variation by ELISA of barley grain colonized with toxigenic fungi were less than 12% for B1 and OA but as high as 17% for T2.     

Enzyme-linked immunosorbent assay for screening aflatoxin B1 in cottonseed products and mixed feed: collaborative study

A joint AOAC/IUPAC (International Union of Pure and Applied Chemistry) interlaboratory study of an enzyme-linked immunosorbent screening assay (ELISA) for aflatoxins was conducted in laboratories in Canada, France, Japan, South Africa, Switzerland, The Netherlands, Tunisia, and the United States. Twenty-eight samples of raw and roasted peanuts, corn, whole cottonseed, cottonseed meal, ammoniated cottonseed meal, and poultry feed containing various quantities of natural aflatoxins and supplemented when appropriate with aflatoxin B1 were distributed to participating laboratories for testing. The assay is based on conjugation of pure aflatoxin B1 to an enzyme and the competition between this conjugate and (free) aflatoxins in the product for aflatoxin-specific antibodies coated onto microtiter well walls. After a wash step to remove all unbound aflatoxins, a substrate, added to each well, is catalyzed from a colorless to a green solution by any bound enzyme-conjugated aflatoxin B1 present. The intensity of the color decreases as the amount of free aflatoxin B1 in the product increases. Overall correlation was good between ELISA and thin-layer chromatographic (TLC) results for cottonseed products and mixed feed. Variable results were reported for corn and peanut product samples. Although some positive samples (greater than 15 ng/g) of cottonseed products and mixed feed were reported to contain less than 15 ng/g by visual determination, a review of data for absorbance measurements showed that the contamination level was close to the greater than or equal to 15 ng/g standard and would not have been reported as negative under routine screening.(ABSTRACT TRUNCATED AT 250 WORDS)     

International mycotoxin check sample program: Part I. Report on laboratory performance for determination of aflatoxins B1, B2, G1, and G2 in raw peanut meal, deoiled peanut meal, and yellow corn meal

Three aflatoxin-contaminated samples (raw peanut meal, deoiled peanut meal, and yellow corn meal) were analyzed by 121 laboratories in 31 countries. Sufficient data were obtained to permit a statistical comparison of the performance of laboratories using the BF, CB, and EEC methods and those using high performance liquid chromatography (HPLC) for quantitation. No significant differences were found between means for laboratories using these 4 methods for the analysis of raw peanut meal or yellow corn meal. However, for deoiled peanut meal, means were significantly different for laboratories using the BF method compared with the CB or EEC methods for B1 and B2, and for laboratories using the CB method compared with HPLC methods for G2.     

A rapid confirmatory method for analyzing tetracycline antibiotics in bovine, swine, and poultry muscle tissues: matrix solid-phase dispersion with heated water as extractant followed by liquid chromatography-tandem mass spectrometry

A rapid, specific, and sensitive procedure for determining four widely used tetracycline antibiotics and three related epimers in bovine, swine, and poultry muscle tissues is presented. The method is based on the matrix solid-phase dispersion technique with heated water as the extractant followed by liquid chromatography (LC)-tandem mass spectrometry (MS) equipped with an electrospray ion source. Target compounds were extracted from tissues with 5 mL of water heated at 70 degrees C. After acidification and filtration, 100 microL of the aqueous extract was injected in the LC column. MS data acquisition was performed in the multireaction monitoring mode, selecting two precursor ion to product ion transitions for each target compound. Heated water appeared to be an excellent extractant, since the absolute recovery data ranged between 70 and 78%. The accuracy of the method was determined at three spike levels, using minocycline as a surrogate analyte, in any different kind of muscle tissues considered and varied between 88 and 109% with relative standard deviations ranging between 3 and 11%. Limits of quantification were estimated to range between 1 (chlortetracycline) and 9 ng/g (4-epioxytetracycline), based on a signal-to-noise ratio of 10, and are well below the tolerance levels set by the European Union. The effects of the extraction temperature, volume of the extractant, and washing of the material supporting the biological matrix with ethylenediamine tetraacetic disodium salt on the analyte recovery were studied.     

Soil and foliage arthropod communities in conventional,reduced and no-tillage corn (maize,Zea mays L.) systems: A comparison after 20 years of continuous cropping

The influence of long-term (20 years) tillage - moldboard-plowed, reduced- and no-tillage practices - on soil-inhabiting and canopy arthropod communities was examined in corn (maize) systems during a 3-year period. Effects of a soil-applied insecticide (terbufos) on the anrthropod communities were also investigated. Damage by 3 major insect pest species of maize were evaluated: black cutworm, Agrotis ipsilon (Lepidoptera: Noctuidae); European corn borer, Ostrinia nubilalis (Lepidoptera: Pyralidae); corn rootworm beetles, Diabrotica spp. (Coleoptera: Chrysomelidae). Cutworm damage to corn was lowest in the conventional-tillage treatment. Damage by this species was greater in soil-applied insecticide treatments versus no-insecticide treatment. Neither tillage treatment nor insecticide usage had a significant impact on European corn borer damage to corn. Rootworm feeding on corn varied from year to year, with no discernible effect of tillage treatment on damage levels. Total numbers of microarthropods (mites and collembola) were lowest in the conventionally- (moldboard-) plowed treatments and highest in no-tillage treatments. Insecticide treatment significantly increased oribatid mite density, but consistently lowered (although not significantly so) mesostigmatid mite populations. Insecticide application had little if any noticable influence on collembolan (springtail) numbers. With macroarthropod populations, there was a trend toward greater numbers of ground beetles and spiders in the no-tillage systems. Corn rootworm and ladybird beetles (Coccinellidae) accounted for over 95% of the arthropods collected from the corn foliage. With the exception of 2 sampling dates, western corn rootworm beetle density was greater in no-tillage compared with reduced- and conventional-tillage treatments. Ladybird beetle populations were not affected by tillage or insecticide treatments.     

A rapid, inexpensive and quantitative procedure for assessing soil structure with respect to cropping

Abstract. The essential factors dependent on soil structure that influence plant growth are soil/root contact, adequate air and water, and low mechanical impedance. Bulk density, shear strength and texture arc interrelated closely and permit quantification of these factors. A general relationship between clay content and vane shear strength of soil at field capacity and non-limiting bulk density provides a rapid means of quantitatively estimating structure. We propose a procedure utilizing vane shear strength and a tactile assessment of clay content as criteria for judging soil structure in the field.     

Transfer functions for solid-solution partitioning of cadmium, copper, nickel, lead and zinc in soils: derivation of relationships for free metal ion activities and validation with independent data

Models to predict the solid-solution partitioning of trace metals are important tools in risk assessment, providing information on the biological availability of metals and their leaching. Empirically based models, or transfer functions, published to date differ with respect to the mathematical model used, the optimization method, the methods used to determine metal concentrations in the solid and solution phases and the soil properties accounted for. Here we review these methodological aspects before deriving our own transfer functions that relate free metal ion activities to reactive metal contents in the solid phase. One single function was able to predict free-metal ion activities estimated by a variety of soil solution extraction methods. Evaluation of the mathematical formulation showed that transfer functions derived to optimize the Freundlich adsorption constant ( K _f ), in contrast to functions derived to optimize either the solid or solution concentration, were most suitable for predicting concentrations in solution from solid phase concentrations and vice versa . The model was shown to be generally applicable on the basis of a large number of independent data, for which predicted free metal activities were within one order of magnitude of the observations. The model only over-estimated free-metal ion activities at alkaline pH (>7). The use of the reactive metal content measured by 0.43 m HNO₃ rather than the total metal content resulted in a close correlation with measured data, particularly for nickel and zinc.     

A rapid multiplexed chemiluminescent immunoassay for the detection of Escherichia coli O157:H7, Yersinia enterocolitica, Salmonella typhimurium, and Listeria monocytogenes pathogen bacteria

A simple and rapid multiplexed sandwich chemiluminescent enzyme immunoassay has been developed for the simultaneous detection of Escherichia coli O157:H7, Yersinia enterocolitica, Salmonella typhimurium, and Listeria monocytogenes. To achieve the multiplexed detection of the four pathogens, a new polystyrene 96 well microtiter plate format has been designed, in which each main well contains four subwells in the bottom. The monoclonal antibodies specific for each bacteria were separately immobilized in each subwell. When the samples were added to the main wells, the bacteria able to specifically bind to the corresponding monoclonal antibody were captured in one of the four subwells. Subsequently, a mixture of peroxidase-labeled polyclonal antibodies against the four bacteria was added and the peroxidase activity of the bound polyclonal labeled antibodies in each well was measured by an enhanced luminol-based chemiluminescent cocktail using a low-light charge-coupled imaging device. The assay was simple and fast, and the limit of quantification was in the order of 104-105 CFU/mL for all bacterial species. The accuracy of the method, evaluated by comparison of the results with a conventional culturing methodology, was satisfactory, with recovery values ranging from 90 to 120%. This method can be used as a screening test to evaluate the presence of these pathogen bacteria in different foodstuffs.     

Quantifying the fine scale (1km × 1km) exposure,dose and effects of ozone: Part 2 estimating yield losses for agricultural crops

In Britain wheat is an important crop accounting for 41% of the total cereal production. In this study ozone concentrations for 1989 estimated as described in Part 1 of the paper are integrated with the estimated wheat distribution to derive a detailed estimate of the impact of ozone on wheat yields at a fine spatial scale (1km × 1km). These data provide estimates for calculating regional and national yield losses. The methodology can be applied to other crop species. Recent research on a range of crops has established relationships between the economic yield loss for certain crops, including wheat, and ozone exposure. Exposure is described as the accumulated exposure above a threshold experienced during the daylight hours (AOT). Critical AOT values are derived from yield exposure relationships which show linear reductions of yield loss with increasing ozone concentrations. This study has made use of land cover data from remotely sensed imagery at 25m resolution and nationally collected agricultural statistics for counties. These data were combined using an areal interpolation technique to provide more spatially articulate estimates of the location and intensity of wheat production. The results demonstrate the economic importance of ozone as a pollutant. Wheat yield losses attributed to ozone vary between different parts of the country but, for years when ozone levels are high, yield losses are likely to be significant in some areas.