Design of an Agent Communication Architecture Based on KQML

Inter-communication marks a highlight of Multi - Agent system research, KQML (Knowledge Query and Manipulation Language) is widely used for agent communication. After analyzing and researching the structure of KQML which including the communication protocol defined in the language, the content of the language, message router and facilitator , we design an agent communication architecture which solves the communication problems of agents in our inte-grative and intelligent backup system ( ADP) and provide its implementation methods.     

GSM技术在棉田水分监测中的应用

利用GSM无线通讯技术实时地采集棉田水分数据,然后将水分监测数据发送到集中监控中心,由上位机决策支持系统进行相应的数据处理,决策结果以GSM短消息方式发送到用户手机上,实现了水分信息的动态管理。     

A fault data recording system design for hybrid electric vehicles

A data recording system for fault diagnosis of hybrid electric vehicles was studied by taking the integrated starter and generator (ISG) hybrid electric vehicle as the investigation object. The fault diagnosis communication net was established using a CAN bus and a K line. As designed, the system hardware structure included a CPU processing module, a communication module, and a USB recording module. With the system requirements and characteristics in mind, special circuit design and analysis of USB mass storage module were carried out based on the hardware scheme and software design. In the running test, the fault data recording system worked stably, and the data was recorded integrally and correctly. At the same time, the online display data accurately reflected the vehicle's running status.     

Influence of MUD on the System Capability of CDMA

In CDMA communication system, the relativities between users result in Multiple Access Interference (MAI). With the increase of users, MAI becomes the main jam of broadband CDMA communication system. Multi-User Detection (MUD) is the most important technology of anti-jamming in the broadband CDMA communication system, which can eliminates MAI effectively by using the information of all user signals to detection single. This paper analyze the expression of system capability without MUD and with MUD, and puts forward the way to increase system capability by using MUD. Then the influence of MUD on CDMA system capability is discussed by MATLAB emulation. Basing analysis and emulation, the conclusion is got: the higher the MUD efficiency, the better the improvement of CDMA system capability; under the same MUD efficiency, the lower data rate, the smaller inter-cell interference, the lower the ratio of bit energy to power spectrum, the better the improvement of CDMA system capability.     

A PACS Scheme Based on High-speed Ethernet

Picture archiving and communication system(PACS) is the key way to realize the medical images modernized management, the main work of which is to ensure the medical image information can be transmited and applied with high efficient. The Ether net is a popular local net. The author has described a PACS scheme based on high speed Ether net, with which, many modular functions (medical image sampling, medical image processing, medical image storage, medical image management, medical image review, medical image transmission, medical image edit, et al) can be realized. Also, the PACS can be fused with HIS.     

A NEW COMPUTER DATA ACQUISITION AND COMMUNICATION SYSTEM FOR ENVIRONMENT PROTECTION FIELD

A new computer data acquisition and communication system is proposed in this paper. The system has the following charatcrjstics: the master station has the double functions of monitoring and controllng the slave stations. The system has low bit erro rrate of data communication, high catch rate of data acquisition and the strong operational reliability. The two years practical operation has proved that the system proposed is effective for the environment-protection field.     

Application of Web Server in Remote and Intelligent On-line Diagnoses System for Rotational Machinery

Web Server is a software technology and communication method to carry out information issuance. The new concept of combination of equipment faults diagnoses with Web Services technology is proposed. The techniques flow of equipment, techniques parameters, signal characteristics and inference resolution in faults diagnoses are put forward with communication and software in order to carry out data dynamical exchange and interface of HMI. The remote processing on network of system information issuance is formed in this way. The principle and characteristics of Web Server technology are introduced. The common contents of information issuance in on line diagnoses system is also classified. The Web Server is applied in the project for high technology research work (863 project) "Remote and Intelligent On-line Diagnoses System for Rotational Machinery" to realize the function of information issuance and data inquire by groupware of DELPHI 6 Web Services.     

中国水产科学研究院质量标准体系“十二五”回顾与分析

旨在完善中国水产品质量标准体系建设,为水产品质量安全监管工作提供基础资料。以中国水产科学研究院质量标准体系为例,分析中国水产品质量标准体系的现状。具体回顾了中国水产科学研究院质量标准体系“十二五”工作,阐明了在争取科研项目,积累科研成果,构建交流平台等方面取得的成效,同时指出在项目申请、能力建设、成果集成、交流合作等方面还存在问题,并提出相应的建议。     

Growth of Incumbent Firms and Entrepreneurship in Vietnam

This paper analyzes the relationship between the performance of incumbent firms and the net entry of new firms by combining various theoretical views of entrepreneurship. Different regression models to treat dynamics and endogeneity issues are applied to test the research hypothesis with regional micro‐data for 61 Vietnamese provinces from 2000 to 2008. The main finding is that net entry is associated with the performance of incumbent firms and the overall performance of the economy. Incumbents' growth and gross domestic product growth induce changes in the existing production system and stimulate the creation of an economic environment more favourable to new firm formation. Consistent with the hypotheses put forward within the “knowledge spillover,” the “error‐correction,” and other approaches, incumbents may generate new entrepreneurial opportunities not only for themselves but also for the whole society.     

农产品远程价格信息采集和发布系统的研究

利用TC35与低功耗单片机结合设计便携式手持数据采集终端,采用手持信息采集终端收集信息,通过GSM方式传送到数据中心,数据中心负责处理和发布信息,实现了农产品远程价格信息的采集和发布,用户可通过上网或手机短信进行价格查询。系统实时性好,可靠性高,克服了以往信息采集发布的缺点,能够有效的进行农产品价格信息方面的信息传递工作及数据统计。详细阐述了手机模块TC35中SMS功能的工作原理、便携式手持终端的硬件设计与软件实现。经示范应用,系统达到了设计目标。     

闽台农村科技信息传播状况的比较与借鉴

从信息服务主体、信息服务内容、信息传播载体、信息传播支撑体系以及服务方式等角度对闽台农村科技信息传播状况进行了比较,借鉴其经验,提出了几种新的传播模式,并从政府服务方式、农村信息基础设施建设、农村信息传播队伍建设以及资源建设等角度提出了建立福建省农村科技信息传播创新体系的对策。还提出了应建立闽台农村科技信息传播合作机制,拓展政策空间、建立策略联盟、拓宽沟通渠道。     

Design of data acquisition and communication system for AMTcomprehensive performance test bench

AMT (Automatic Manual Transmission) comprehensive performance test is one of the main means to develop and evaluate AMT. An overall scheme of the data acquisition and communication system for AMT comprehensive performance test bench is proposed according to the requirement of the test bench, and a communication network of data acquisition and communication system is built. The hardware and software of data acquisition system are designed. The experiments show that the system meets the requirement of data acquisition and communication system for AMT comprehensive performance test bench and it lays a foundation for AMT comprehensive test research.     

Real-Time Tracing of 200 MW Power Plant Generators By A 3~+ Network

The communication of the application program among work tations of 3+ network is realized by the shared file on harddisk of the network server,which does not support the application program' s real-time communication among the network workstations nor supplies software or hardware needed for information refreshing, nor fits for field multibatch continuous real-time transmission and processing of working condition information, by using the NETBIOS function call method, the real-time communication among network workstations is realized and a power plant working information background real-time communication and data processing system is developed which effectively traces working condition from tow 200 MW power plant generators, altogether 321 points from a cycling detecting system and 78 binary points for broadcasting the information to other workstations,and realizes a complx display of 14 working condition graphs and a real-time data simulation graph.     

A Correspondent Node Binding of Method Based on Early Binding Updates Option

The mobile IPv6 protocol solves the mobile communication problems in the next generation Internet.The mobile IPv6 not only provides huge address space,but also strengthens handover ability of mobile user,and realizes route optimization.IPv6 will become the next generation Internet protocol;so the mobile IPv6 will be widely used in the next generation Internet.The moblile IPv6 will provide in the future network,a uniform transmission platform that transmits data,voice data and video data,or other services.People not only put forward more and more requirements for multimedia playing operation,but also bring forward higher request,which is interaction capabiliby communication,Because the long latency associated with mobile IPv6's return routability procedure of correspondent node binding,this paper presents a fast correspondent node binding of method based on early binding updates option.The method not only eliminates at least 50% of the additional delay that a standard correspondent node binding adds to the network stack's latency,but also reinforces the ability to support alternant real-time application.     

Analysis on Communication Mode of Feeder Automation

The paper mainly analyzes and studies mode of bus communication based on optical fiber at one_point to multiple_point and mode of point_to_point communication based on wireless at one_point to multiple_point. The advantages and disadvantages of two communication modes are given. Considering the demands on FA data communication,the paper presents transmitting data based on network mode and connection mode,implementing application protocol based on object oriented mode and international standard. Considering the requirements of FTU unit for data communication, the paper proposes the network inner operating system in FTU unit, which is indispensable. Data are transmitted on client/server mode, defined and organized on object oriented mode and transmitted on logical address.     

测土配方施肥综合服务平台设计与实现

针对测土配方施肥专家系统网络化、综合化、精确化的发展需求,提出一套测土配方施肥综合服务平台解决方案,平台基于B/S架构,采用Asp.net实现,支持同类型村级地块为最小施肥单元。从功能模型、需求分析、数据库设计和应用架构等方面阐述平台的实现技术方案,并就平台的关键技术“村级地块网络地图构建”给出了具体的解决方法。展示了平台主要功能的实现效果。     

Realizing 3 Layers Transport Model in the Communication Between Embedded System and PC

This article puts forward a 3 Layers Model for the communication between embedded system and PC. It is based on the speciality of them and the TCP/IP model. The model defines the communicate process of embedded system to be three layers: Transport Layer, Control Layer and Application Layer. Each layer serves for its higher-up. It can keep the efficiency and credibility of the communicate process and the authors prove and analyse that in the article. the concept of the model is also suitable for Bluetooth, IrDA and other kinds of communication about embedded system.     

Information Platform of Enterprise Office Based on Dynamic and Instantaneous Coordination Work

It is not able to provide the decision service information that should be instantaneous, exact and all-around for governor by means of traditional mode of information communication. And it is important problem faced by modernization office. In order to get the needed information instantaneously and satisfy requirement of coordination work, the paper presents a kind of enterprise office information platform based on dynamic coordination work. The platform can guarantee coordination work of the system dynamically and instantaneously, and it is stronger in functions, and facility in use. It is discussed in more details to the design of dynamic coordination workflow drive and coordination message service drive and so on. The application effect of practical engineering shows that the design is successful.     

Application of IEEE1394 Communication Technique in Car-engine Real-time Imitating

A design scheme using IEEE1394 serial interface to achieve communication between PC computer and DSP controller is introduced, which is used in real-time imitating for car-engine integrated controlling system. First, the rule of high speed IEEE1394 serial communication using TSB41BA3/TSB12LV01B interface is discussed. Further, the design scheme of software and hardware of communication sub-system is probed. The application effect is good in the car-engine integrated controlling system developed.     

Real-Time Strategies for the Fire Alarm Information System Based on Internet

According to the reality of the development of fire alarm system in our country, this paper offers a fire alarm information system based on Internet. Being different with the way of normal router in transmitting all data packages fairly, a new dispatch algorithm is put forward, which can identify different data packages of demanding different real-time performance and transmit the data packages of demanding high real-time performance by jumping queue intelligently. That decreases warning time delay and improves the dependability of important data transmitted by router. A new kind of method is proposed to satisfy a high real-time system at a low cost.