Canopy density in stands of Picea abies and Pinus sylvestris after different thinning methods

Altogether 82 plots (261 estimations) of Picea abies (L.) Karst, and 193 plots (360 estimations) of Pinus sylvestris (L.) stands were estimated by a vertical tube. The “crown free projection”, CFP, of stands thinned in three methods with different thinning grades was measured: unthinned, heavily and very heavily thinned, heavily thinned delayed first thinning, extra heavily thinned and thinned from the top. Basal area (m²ha^?1) density (stems ha^?1) and diameter sum (m ha^?1) were plotted against CFP. Basal area was the best practical measure of stand in this study. Generally Scots pine stands have higher CFP and the curves are steeper than in Norway spruce stands. Depending on the grade of thinning, heavily and very heavily thinned spruce stands, delayed first thinning included, have CFP values of 10–15% and stands thinned from the top, 20–40%, compared with 30–80% and 30–60% respectively in pine stands. Extra heavily thinned stands have the highest CFP, 20–80% in spruce and 50–90% in pine stands. The CFP levels after thinning are too high in pine stands for avoidance of sucker and sprout production of aspen and birch. In dense Norway spruce stands thinned from the top or heavily and very heavily thinned, the CFP values are low enough (≤30%) to diminish the production of suckers.     

The spreading of the S type of Heterobasidion annosum from Norway spruce stumps to the subsequent tree stand

The occurrence of Heterobasidion annosum in stumps and growing trees was investigated on 15 forest sites in southern Finland where the previous tree stand had been Norway spruce (Picea abies) infected by H. annosum, and the present stand was either Scots pine (Pinus sylvestris), lodgepole pine (Pinus contorta), Siberian larch (Larix siberica), silver birch (Betula pendula) or Norway spruce 8–53 years old. Out of 712 spruce stumps investigated of the previous tree stand, 26.3% were infected by the S group and 0.3% by the P group of H. annosum. The fungus was alive and the fruit bodies were active even in stumps cut 46 years ago. In the subsequent stand, the proportion of trees with root rot increased in spruce stands and decreased in stands of other tree species. On average, one S type genet spreading from an old spruce stump had infected 3.0 trees in the following spruce stand, 0.5 trees in lodgepole pine, 0.3 trees in Siberian larch, 0.05 trees in Scots pine and 0.03 trees in silver birch stand. Although silver birch generally was highly resistant to the S type of H. annosum, infected trees were found on one site that was planted with birch of a very northern provenance.     

Functions for Biomass Estimation of Young Pinus sylvestris,Picea abies and Betula spp. from Stands in Northern Sweden with High Stand Densities

New silvicultural regimes with high within-stand competition require new functions for estimation of standing stock and growth of biomass components, since the allometry of trees is changed by light competition. This paper presents functions for estimation of the aboveground biomass dry weights for stem wood, stem bark, branches and leaves of young (diameter at breast height <10 cm) Scots pine (Pinus sylvestris L.), Norway spruce [Picea abies (L.) Karst.] and birch (Betula pendula Roth. and Betula pubescens Ehrh.) trees growing in dense mixed stands. The functions were derived from a sample consisting of 84 Scots pine, 43 Norway spruce and 66 birch trees from six stands in northern Sweden with high stand densities (>10000 st ha^-1). The logarithmically transformed power function displayed a good ability to stabilize the variance of dry weights and showed a good fit to the material (0.37< R ² <0.99). A comparison with the most commonly used biomass functions in Sweden today showed that they overestimated the weight of stem wood and branches, while the weight of foliage was underestimated. The nature of these discrepancies suggested that the precision of biomass estimations might also be improved for young trees at wider spacing.     

Biomass production and carbon sequestration of dense downy birch stands on cutaway peatlands

The establishment of biomass plantations with short-rotation forestry principles is one of the after-use options for cutaway peatlands. We studied biomass production and carbon sequestration in the above- and below-ground biomass of 25 naturally afforested, 10–30 years old downy birch (Betula pubescens Ehrh.) stands located in peat cutaway areas in Finland. Self-thinning reduced the stand density from 122,000 trees ha^?1 (stand age of 10 years) to 10,000 trees ha^?1 (25–30 years), while the leafless above-ground biomass increased from 17?Mg ha^?1 up to 79–116?Mg ha^?1. The total leafless biomass (including stumps and roots) varied from 46 to 151?Mg ha^?1. The mean annual increment (MAI) of the above-ground biomass increased up to the stand age of 15 years, after which the MAI was on the average 3.2?Mg ha^?1a^?1. With below-ground biomass, the MAI of the stands older than 15 years was 4.7?Mg ha^?1. The organic matter accumulated in the O-layer on the top of the residual peat increased linearly with the stand age, reaching 29.3?Mg ha^?1 in the oldest stand. The O-layer contributed significantly to the C sink, and the afforestation with downy birch converted most of sites into C sinks.     

Effects of thinning paper birch on conifer productivity and understory plant diversity

Naturally regenerated paper birch (Betula papyrifera Marsh.) is commonly removed from juvenile interior Douglas-fir (Pseudotsuga menziesii var. glauca [Beissn.] Franco) plantations in southern interior British Columbia, Canada, to increase conifer productivity and create a free-growing stand; however, this practice is expensive and contentious because of possible negative ecological impacts. One solution is to retain an optimal density of birch where growth gains of understory Douglas-fir are balanced against losses to Armillaria ostoyae (Romagn.) Herink and understory plant species diversity. We sought to find this optimal density by comparing four evenly applied birch density reduction treatments (0, 400, 1111, and 4444 retained birch stems ha^?1) and an unthinned control (>7300 retained birch stems ha^?1). The mortality rate of Douglas-fir due to Armillaria root disease increased non-significantly with thinning intensity. Mean diameter increment of surviving Douglas-fir improved the most where birch was completely removed, with little variation among intermediate thinning treatments. Height growth was unaffected by the thinning treatments. Diversity of cryptogams was significantly greater in the control than where all birch was removed. We suggest that the treatment with 4444 retained birch stems ha^?1 provides the best balance for improving Douglas-fir growth while minimizing risk of increased Armillaria root disease and reduced understory plant diversity in young mixed stands.     

Stand dynamics and tree quality response to precommercial thinning in a northern hardwood forest of the Acadian forest region: 23 years of intermediate results

In the late 1980s, large forest companies began precommercial thinning (PCT) operations in young northern hardwood cutovers in New Brunswick, Canada. To provide supporting growth and yield information, an industrial experiment was established at residual stand densities of 1300, 1600, 1900, and 2200?stems?ha^?1. Stand responses were examined for measurements recorded at 0 (1987), 5 (1992), 10 (1997), 16 (2003), and 23 (2010) years after establishment. Average diameter at breast height, quadratic mean diameter, stand basal area, and stand total volume growth increased as stem density decreased from PCT. There were significant linear differences for many of these variables between treatments and time periods (year). No significant differences were detected in tree height between treatments. In 2010, the four PCT thinning treatments did not exhibit any differences in potential sawlogs at 2.4?m (8?ft) and 3.6?m (12?ft) lengths. Significant differences were observed for 4.9?m (16?ft) sawlogs that were produced at the least dense spacing (1300?stems?ha^?1). Results from this study and recommendations from the European literature suggest that value-added timber products may be produced from more intense PCT treatments than are currently being practiced on sites dominated by yellow birch (Betula alleghaniensis Britt.).     

Models for Assessing Timber Grade Distribution and Economic Value of Standing Birch Trees

In order to obtain a more precise prediction of the distribution of each timber grade or log grade with regard to the volume of birch (Betula pendula Roth., B. pubescens Ehrh.) in models for long-term planning, ordered probit models were developed. These models were developed by using data from three mixed birch and Norway spruce stands in Norway. The data consisted of 168 stems. In Norway, three ordinary birch saw log grades are commonly used, with pulpwood as a fourth grade. In this study, these four grades were applied in addition to waste timber, which was treated as a fifth grade. The developed models showed that the grade distribution of birch trees of mixed birch and spruce stands was highly correlated with tree height (p<0.01) and height to first visible dry branch (p=0.081). The statistical significance of both models was good (p<0.0001), as measured by log likelihood test statistics. Classifying the 168 stems by saw timber or pulpwood in butt log led to greatly improved estimates (p<0.01). The developed models would allow the incorporation of timber grade in stand simulators, enabling more precise predictions regarding the economic implications of alternative management strategies for birch trees.     

Natural regeneration in patch clear-cutting in Picea abies stands in Southern Finland

Abstract

The success of natural regeneration on patch clear-cuts in Norway spruce stands in Southern Finland was examined in terms of stocking and tree height. The experiment was established in mature spruce stands in the submesic Myrtillus (MT) site type. In each of the eight study sites, three plots were treated with clear-cutting and planting, clear-cutting with partial tree retention and planting, and patch clear-cutting without site preparation, respectively. In three of the study sites, one plot with patch clear-cutting and site preparation was established. Each plot was 1 ha, out of which three patches of 40×40 m were clear-cut in the patch treatments. 10–11 years after cutting, the patches had on average 1316 crop trees ha^–1, of which 91% were spruces. Some 27% of the stands were up to the target stocking level (≥1600 ha^?1), and 36% were at least satisfactory (≥1300 ha^?1). Site preparation did not yield greater stocking levels on patches, but that result is ambiguous due to a difference in initial stocking. The average spruce tree height in the patches (0.76 m) was much smaller than in the case of clear-cutting and planting (2.42 m). In conclusion, the patches had been restocked tolerably well with spruce and birch for practical purposes during the 10- to 11-year period, but the regeneration process had been very slow compared to clear-cutting and planting.     

Influence of precommercial thinning grade on branch diameter and crown ratio in Pinus sylvestris in southern Sweden

Precommercial thinning is regarded as one of the most important measures for influencing timber quality in stands of Scots pine (Pinus sylvestris L.). The present study considers the influence of both thinning intensity and tree height at the time of thinning on diameter of the thickest branch and crown ratio. A total of 115 plots (either naturally regenerated, planted or sown, and either thinned down to 528–8000 stems?ha^?1 or untreated) included in 20 sites in southern Sweden were analysed. The average tree height after thinning varied from 1.2 to 8.3?m. An increasing number of remaining stems resulted in a reduction in branch diameter, although the reduction appeared to be only minor if the number of stems after thinning was more than 3000 stems?ha^?1. It was found that late thinning reduced the diameter of the thickest branch. The crown ratio decreased with stand height, number of stems after thinning and average height at thinning. The results were consistent for all trees and for the 500 thickest trees per hectare.     

Growth of Mixed Birch-Coniferous Stands in Relation to Pure Coniferous Stands at Similar Sites in South-eastern Norway

Mean age, mean and top heights and yield were studied in 20 mixed stands of birch ( Betula pubescens Ehrh. and B. pendula Roth) and Picea abies (L.) Karst. and nine mixed stands of birch and Pinus sylvestris L. in south-eastern Norway. Each mixed stand and the adjacent pure coniferous stand (control) were growing under the same site conditions and had not been commercially thinned. There were no significant differences in mean age at breast height or in top heights between birch and conifers in the mixed stands, while mean height was significantly higher for birch than for spruce. A growth index was calculated based on total volume and age at breast height. For the spruce sites the growth in young mixed stands (birch < 17 m) was superior to that of pure spruce, while the difference was insignificant in older stands. The growth index correlated positively with the ratio between generatively and vegetatively regenerated birch trees, and negatively with the age of the oldest species in the mixture and with site quality. For the pine sites there was no significant difference in the growth index between mixed birch-pine and pure pine stands. A mixture effect of birch on the volume yield of spruce or pine could not be demonstrated.     

Foliar Responses of Understorey Abies lasiocarpa to Different Degrees of Release Cutting in a Betula papyrifera and Conifer Mixed Species Stand

Foliar responses of subalpine fir [Abies lasiocarpa (Hook.) Nutt.] to thinning were studied in a 35-yr-old mixed stand of paper birch (Betula papyrifera Marsh.) and conifers. The stand regenerated naturally after a wildfire with a canopy dominated by paper birch (average height 9.8 m) and an understorey dominated by subalpine fir (average height 1.6 m). The stand was thinned to four densities of birch: 0, 600 and 1200 stems ha-¹ and control (unthinned at 2300-6400 stems ha-¹) in the autumn of 1995. The understorey conifers, mainly subalpine fir, were thinned to 1200 stems ha-¹. The study used a completely randomized split-plot design. Three sample trees were systematically selected from each treatment replicate and each tree stratum (upper, intermediate and lower understorey). One-year-old and older age class needles were collected from one south-facing branch within the fifth whorl from the tree top. Thinning of paper birch significantly (p <0.001) increased leaf area and dry weight per 100 needles for intermediate and short trees except in the 0 birch treatment. Understorey subalpine fir trees in 600 stems ha¹ birch (T3) had the largest leaf area and leaf dry weight per 100 1-yr-old needles. Specific leaf area (SLA) decreased from unthinned (T1) to 0 birch (T4). Lower understorey trees had the largest SLA. One-year-old needles had significantly higher N, P and K concentrations in all the thinning treatments. These responses are consistent with the shade tolerance of subalpine fir. The results suggest that when managing a paper birch-conifers mixed-wood forest it may be of benefit to understorey conifers to leave a birch canopy as a nursing crop.     

Stand density and fertilization effects on aboveground allocation patterns and stem form of Pinus sylvestris in young stands

The increasing demand for forest biomass for energy generation could be partially met by growing denser stands and use of fertilizer. Before this is done at large scale, more knowledge of the effects of stand density and fertilization on aboveground allocation patterns and stem form is needed. Therefore, effects of pre-commercial thinning (PCT) to 3000 stems ha^?1, an unthinned dense control (C), and PCT combined with two levels of fertilization (100 kg ha^?1 of nitrogen applied either during the establishment of the field experiment (F1) or annually (F2)) were examined in 23- to 26-year-old Scots pine (Pinus sylvestris L.) stands six years after the establishment of the field experiment. In total, 114 sample trees were harvested using destructive biomass sampling. The growth allocation and stem form of trees with diameter at breast height (DBH; 1.3 m height) >5.0 cm were not affected by either the PCT or fertilization. Small trees (DBH < 5 cm) in denser, unthinned control plots had more slender stems (lower DBH/height ratios) and allocated less growth to branches and foliage than trees in PCT plots. Fertilization had little effect on the stem form and growth allocation of the smallest trees. Therefore, effects of stem density and fertilization on stem form and growth allocation to foliage were only found for small suppressed trees, and the treatments had very little influence on dominant and codominant trees.     

Effect of wide spacing on increment and branch properties of young Norway spruce

The effects of stand density on increment and branch properties were studied in three spacing experiments of Norway spruce [Picea abies (L.) Karst.]. The stand densities ranged from 350 stems ha⁻¹, regarded as open-grown trees, up to 1,600 stems ha⁻¹, corresponding to the density recommended for forestry practice. Properties of all the branches were measured from the stem apex downwards. The study material included a total of 5,661 branches from 45 trees. Increasing stand density resulted in a decrease in radial increment as well as shorter and narrower crowns, but it had no effect on height increment. The average number of spike knots per tree was 0.87, 0.27, and 0.33 in densities of 350, 700 and 1,600 ha⁻¹, respectively. Additionally, in the widely spaced stands of 350 stems ha⁻¹, the fraction of trees having spike knots was high (over 50%). At a density of 1,600 ha⁻¹, the sample trees had somewhat less branches in a whorl compared with the more widely spaced plots. The most pronounced effect of stand density was the increase in branch diameter with decreasing stand density. At a density of 350 ha⁻¹, the maximum branch diameter of all the sample trees exceeded the diameter limit of quality class B in the European quality requirements for round wood. The results give some indication that trees subjected to severe competition would produce smaller branches per unit of crown projection area. However, the possibilities for reducing branch dimensions relative to stem and crown size through competition appear quite restricted.     

Timing and intensity of precommercial thinning in Pinus sylvestris stands

The effects of timing and intensity of precommercial thinning were studied in three Scots pine artificially regenerated stands on Vaccinium forest sites in southern Finland. A two-level factorial design (3×3) was used in each stand: thinning at dominant height of 3, 6 and 9 m to 1000, 1600 and 2200 stems ha^?1. The effects of the treatments were analysed after a period of 23–25 yrs when the dominant height was 14–15 m. Early thinning resulted in the highest standing volume and amount of merchantable wood, and also in slightly accelerated height development. Thinning to 1000 stems ha^?1 caused a considerable production loss, but there were no differences between the densities of 1600 and 2200 stems ha^?1. Branches became thicker after early thinning, but the differences between the treatments were negligible for crop trees. Crown ratio was lowest as the result of early or moderate thinning (2200 stems ha^?1).     

Estimation of nutrient removals in stem-only and whole-tree harvesting of Scots pine, Norway spruce, and birch stands with generalized nutrient equations

Whole-tree harvesting (WTH), where logging residues are removed in addition to stems, is widely practised in Fennoscandian boreal forests. WTH increases the export of nutrients from forest ecosystems. The extent of nutrient removals may depend on tree species, harvesting method, and the intensity of harvesting. We developed generalized nutrient equations for Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies Karsten), and birch (Betula pendula Roth and Betula pubescens Ehrh.) stands to be able to calculate the amounts of nitrogen, phosphorus, potassium, and calcium in stems and above-ground biomass (stem and crown) as a function of stand volume. The equations were based on Fennoscandian literature data from 34 pine, 26 spruce, and 5 birch stands, and they explained, depending on the tree species and nutrient, 61–99% and 56–87% of the variation in the nutrient amounts of stems and above-ground biomass, respectively. The calculations based on the equations showed that nutrient removals caused by stem-only harvesting (SOH) and WTH per harvested stem m³ were smaller in pine than in spruce and birch stands. If the same volume of stem is harvested, nutrient removals are, in general, nearly equal at thinnings and final cuttings in SOH, but larger in thinnings than final cuttings in WTH. If the principal aim is to minimize the nutrient removals per harvested stem m³, the harvesting should be done at mature pine stands. The effect of biomass removal on overall site nutrient status depends on site-specific factors such as atmospheric deposition, weathering of minerals, and the size of the nutrient pools in the soil.     

Simulation of the long-term effects of different strategies for precommercial thinning in Pinus sylvestris

The influence of the intensity and timing of precommercial thinning (PCT) on stand development and financial return was studied in Scots pine stands. Functions describing the early development of the stand structure after PCT were developed. The functions were based on 195 plots within 41 PCT experiments in Sweden. The dimension distribution of the established stand was estimated and used as input to the decision support system Heureka, to simulate the stand development until final felling. The studied treatments included PCT to 1000, 2000 and 3000?stems?ha^?1 at mean heights of 2, 4 and 6 m. Separate simulations were carried out for different site fertilities. Mean annual volume increment increased with increasing number of stems after PCT whereas the timing of PCT had only a small effect. The land expectation value (LEV) generally decreased with increasing mean height at PCT, primarily because of the increased cost of PCT. LEV decreased with increasing number of stems after PCT at low fertility sites whereas only minor differences were found for PCT to 1000 and 2000?stems?ha^?1 at medium and high fertility sites. The general pattern persisted when different scenarios of future timber quality were simulated.     

Stand structure and successional trends in virgin boreal forest reserves in Sweden

Fire history and stand structure was examined in twelve virgin forest stands situated within forest reserves in northern Sweden. The selected stands represented fire refuges as well as different successional stages after fire. Six of the stands were dominated by Norway spruce (Picea abies L. Karst.), three were dominated by Scots pine (Pinus sylvestris L.), and three were dominated by hairy birch (Betula pubescens Ehrh.) or aspen (Populus tremula L.). In 3 of the southernmost stands, the average fire interval was 34 to 65 years during the late 1600s to late 1800s, but since 1888 no fires had occurred in any of the stands. The absence of fire disturbance since 1888 is probably caused by the fire suppression in the overall landscape. The standing volume of living trees ranged between 87 and 511 m³ ha⁻¹ while the volume of dead trees, including both snags and logs, ranged between 27 and 201 m³ ha⁻¹. The volume of dead trees constituted ca. 30% of the total stem volume. In the conifer dominated stands, there was a statistically significant relationship between total stem volume, including both living and dead trees, and site productivity. A comparison between the amount of dead and living trees indicated substantial changes in tree species composition in several stands. It is suggested that data on the amount of dead trees, especially logs, and its distribution over decay classes could be used to examine the continuity of certain tree species. All stands had a multi-sized tree diameter distribution, which in most cases was similar to a reversed J-shaped distribution. In general spruce was numerous in the seedling cohort and in small diameter classes, indicating that its proportion in the stands was stable, or was increasing at the expense of pioneer tree species such as pine, aspen and silver birch (Betula pendula Roth.). The most numerous species in the seedling cohort, rowan (Sorbus aucuparia L.), was almost totally missing in the tree layer, indicating a high browsing pressure preventing rowan seedlings from growing into trees. The general increase of spruce and the sparse regeneration of pioneer species, in the stands previously affected by fire, are discussed in relation to natural disturbance regimes, biological diversity and nature conservation policies. It is proposed that reintroduction of fire disturbance is a necessity for future management plans of forest reserves. Other management practices to increase species diversity within forest reserves are also discussed.     

Stem Quality and Height Development in a Betula-Dominated Stand Seven Years After Precommercial Thinning at Different Stump Heights

Topping may provide an attractive alternative to traditional precommercial thinning, offering several advantages. The main stem quality of birch (Betula pubescens Ehrh. and Betula pendula Roth, species not separated) was examined seven growing seasons after such topping in a dense, even-aged and naturally regenerated stand in northern Sweden. The height development and survival of main and secondary stems of birch and secondary stems of willow (Salix spp.) were also studied. At a main stem height of 1.8 m, the following treatments, leaving 3100 main stems ha^?1, were applied to secondary stems: traditional precommercial thinning (cutting just above ground), top-cutting at either 40% (71 cm above ground) or 70% (120 cm above ground) of main stem mean height, and no precommercial thinning. For main stems, topping resulted in fewer forks, straighter stems, higher live crown height and smaller diameter of the thickest branch compared with traditional precommercial thinning. In these respects, topping at the higher level above ground gave the best quality. The main stems were no longer at risk of becoming overtopped by the secondary stems following any of these treatments (except for no precommercial thinning).     

From planting to 26 years of age – actual growth and estimated volume scenarios for spruces and pines

The objective of this study was to compare the survival and volume of conifer stands at 26 years of age with their status at planting. Survival, growth and damage were studied in eight clear felled stands regenerated in 1972. Five of the areas were planted with Norway spruce (Picea abies (L.) Karst.) and three with Scots pine (Pinus sylvestris L.). The plantings were examined in 1972 and 1974. In 1974, the number of living undamaged planted seedlings was low (10–15%). However, the number of undamaged seedlings was supplemented by naturally regenerated conifer and birch seedlings. The total number of undamaged seedling in 1974 was equivalent to 20–30% of the number of seedlings planted. In 1998, the main species in three stands had changed from Norway spruce to Scots pine, and in one stand from Norway spruce to birches. Actual volume in 1998 for the stands was compared to stand volume generate according to five scenarios based on recommended and actual seedling number in 1972 and 1974. The actual volume was 64% of that expected if the recommended number of trees had been planted. Naturally regenerated Scots pine and Norway spruce increased stand density in 1998. The actual volume was 37% higher than the average volume in the surrounding county. On average, 36% of the trees were damaged. More than 50% of the total damage was caused by moose (Alces alces L.). For Scots pine, moose or other browsing animals damaged 30% of the trees. The results of this study indicate that the 1998 volume was higher than expected, considering the low number of undamaged seedlings in 1974. This was mainly due to the large amount of naturally regenerated plants. In addition, the results indicate that the volume could have been higher if the initial conditions had been better. Despite the low number of undamaged seedlings in 1974, seven of the eight studied stands produced a higher volume than the average stand for the region. In practise, high numbers of seedlings should be planted on scarified areas. In most cases there will be a supply of naturally regenerated seedlings.     

Structure of mixed Picea abies (L) Karst,and Betula pendula Roth and Betula pubescens Ehrh. stands in South and middle Sweden

Observed diameter distributions of forest stands are adapted to the Johnson S _b probability function. The stands investigated are untreated mixed stands of Norway spruce (Picea abies (L.) Karst.) and birch (Betula pendula Roth and Betula pubescens Ehrh.) aged between 20 and 32 years. The adaptation of the Johnson S_b probability function is made both on mixed spruce and birch, and on each species separately. Altogether 156 observations were tested with observed distributions against calculated distributions in the Kolmo‐gorov‐Smirnov test. The fractiles are predicted with multiple regression and two multivari‐ate techniques, simultaneous‐equation models (multivariate regression) and partial least squares with latent variables. The independent variables are characteristics of site and stand. Both multivariate methods predict diameter distribution well when tested.