共查询到20条相似文献,搜索用时 31 毫秒
1.
《Communications in Soil Science and Plant Analysis》2012,43(15-17):2799-2814
Abstract Surface horizon samples from two Vertisols, an Andisol, and an Alfisol were collected from farmers’ fields, research station farms, and from uncultivated/ nonfertilized areas to characterize the organic and inorganic forms of phosphorus (P) in the highland plateau soils of Ethiopia using the Hedley soil P fractionation scheme. The total P values ranged from 226 mg‐kg‐1 in the Akaki Vertisol samples developed on alluvial deposits to 1570 mgkg‐1 in the Andisol samples, where the HCl fraction dominates the inorganic soil P pool. The Alfisol samples contained 400 mg‐kg‐1 of total P, with the NaOHand residual P being the dominant P fractions. The resin inorganic phosphorus (Pi) and bicarbonate Pi fractions generally accounted for less than 15% of the total P in all soils, and were positively correlated with organic C. The NaOH P fraction, which was most prominent in the surface horizon samples of the Alfisols, accounted for 4–15% of total P. The HCl P fraction, ranged from 1% in the Alfisols to 46% in the Andisols, and positively correlated with pH. All of the P fractions were negatively correlated with clay and extractable Al contents. The organic P (Po) fractions were positively related to organic carbon (C) and dithionate extractable iron (Fe). All samples collected from farmers’ fields showed a loss of P from the residual, and HCl fractions as compared to the uncultivated/nonfertilized samples. There is also a decrease in the labile P (resin Pi, bicarbonate Pi, and Po) fractions, except for the Akaki Vertisol samples. However, under research station management, the amount of labile P fractions either increased or remained at the same level as the uncultivated/nonfertilized samples, except for the Andisol. Addition of P fertilizer at the recommended rates to the Debre Zeit research station Vertisol appears to have resulted in a slight increase in the labile P and prevented loss of P from the HClP and residual P fractions. 相似文献
2.
Impact of no-tillage agricultural systems on sediment yield in two large catchments in Southern Brazil 总被引:1,自引:0,他引:1
Elizeu Jonas Didoné Jean Paolo Gomes Minella José Miguel Reichert Gustavo Henrique Merten Leandro Dalbianco Cláudia Alessandra Peixoto de Barrros Rafael Ramon 《Journal of Soils and Sediments》2014,14(7):1287-1297
Purpose
The impact of agriculture on water resources has long been a problem associated with the formation of runoff, the siltation of lakes and reservoirs, and overall depletion of water quality. In Brazil, these problems are mainly related to soil degradation by water erosion. However, studies of catchment-scale erosion are still rare particularly in grain-producing regions which have adopted conservative tillage systems for soil protection. In order to contribute to a better understanding of the impact of conservation agriculture on water resources, this study determined the runoff coefficient and sediment yield for two agricultural catchments.Materials and methods
Hydrological and sedimentological monitoring was conducted in two catchments: the Conceicao catchment is characterized by grain production in weathered soils and a gently sloping landscape, while the Guapore catchment is characterized by heterogeneous soils and topography. Both catchments have problems associated with water erosion.Results and discussion
The magnitudes of annual runoff coefficients and sediment yield were high, even if compared to similar agricultural regions, including a catchment with widespread adoption of no-tillage. The sediment yield was 140 t km?2 year?1, and the runoff coefficient was 14 % for the Conceicao catchment, while the sediment yield was 270 t km?2 year?1, and the runoff coefficient was 31 % for the Guapore catchment. The results indicate that problems such as gullies, soil compaction, runoff, floods, siltation, and water quality depletion associated with the misuse of agricultural areas in terms of soil conservation and water use are still evident and important even in regions with widespread adoption of no-tillage systems.Conclusions
The magnitudes of both runoff and sediment yield clearly indicate the need to adopt complementary practices of soil conservation measures, such as mechanical runoff control. 相似文献3.
Tongxin Zhu 《Journal of Soils and Sediments》2013,13(10):1770-1783
Purpose
Closed erosion plots have been used extensively to investigate soil loss and its spatial variation within a watershed. However, erosion rates measured on closed plots at various locations within a watershed may not reflect the “real world” conditions due to plot boundary problems. The purpose of this study was to identify runoff and sediment sources in a semi-arid, complex terrain catchment by using the data collected from open plots, nested catchments, and tunnel systems.Materials and methods
The study catchment, in the Loess Plateau of China, was partitioned into various-level geomorphic units. Runoff and sediment discharges were measured from 55 storm events between 1963 and 1968 on open plots and nested catchments. Storm flows were also monitored in 14 rainfall events from the tunnel systems between 1989 and 1990. This study combined the data collected from the two periods to investigate runoff and sediment sources from the different geomorphic units of the catchment.Results and discussion
On the four open plots (S1, S2, S3, and S4) of the hill slope, total runoff depths of 128.5 mm (S1), 84.3 mm (S2), 101.92 mm (S3), and 141.73 mm (S4) were recorded from all the events over the first period, which correspondingly produced total sediment yields of 3.056 kg m?2 (S1), 9.058 kg m?2 (S1), 42.848 kg m?2 (S3), and 97.256 kg m?2 (S4). The number of runoff events also varied due to a non-uniformity in runoff generation among the different geomorphic units of the catchment. Tunnel flows generally had higher mean sediment concentrations than catchment outflows. Three nested catchments located from the headwaters (C1) to the mouth of the catchment (C3) generated total runoff depths of 120.02 mm (C1), 143.92 mm (C2), and 149.43 mm (C3), and correspondingly produced sediments yields of 62.01 kg m?2 (C1), 144.02 kg m?2 (C2), and 123.92 kg m?2 (C3) for the first period.Conclusions
Significant variations in runoff and erosion existed within the catchment. The spatial variation of runoff generation on the hill slopes resulted from the variation of soil infiltration. Sediment produced from the lower hill slope zone was disproportionally higher than that from the upper hill slope zone. Nevertheless, a significant portion of the sediment eroded on the lower slope zone was caused by runoff generated from the upper slope zone. Tunnel erosion also played a significant role in sediment production. 相似文献4.
Edson Campanhola Bortoluzzi Danilo Rheinheimer dos Santos Maria Alice Santanna Laurent Caner 《Journal of Soils and Sediments》2013,13(6):1093-1105
Purpose
This study investigated desorption of potassium (K) and phosphorus (P) from soil and river suspended sediments sampled during a storm event in a Brazilian watershed traditionally used for tobacco plantations.Material and methods
Suspended sediment samples were collected automatically at the outlet of the watershed and were grouped into three phases: beginning (phase a), middle (phase b) and final stages (phase c) of the storm event. Granulometric and mineralogical characterisation of soils (0 to 0.20 m depth) and suspended sediments was determined, and K and P extractions were performed using a cation and anion exchange resin (CAER) membrane. A kinetic modelling approach was used to estimate the amount of K and P desorbed.Results and discussion
Clay-sized (<2 μm) content of the soils were all <21 %. Kaolinite, smectite (partially with hydroxy-Al interlayer) and a small amount of illite were found in the clay fraction of the different soils. The clay-sized fractions in sediments of phases a, b and c of the storm event were 49, 52 and 72 %, respectively. Smectite (>90 %) and kaolinite (<10 %) were the dominant clay minerals in the suspended sediments. The values of labile P and potentially available P of suspended sediments were higher than those for soils. In sediments, the highest values of labile P (325 mg kg?1) and labile K (4,458 mg kg?1) were found in phase c and in phase a, respectively.Conclusions
Particle size distribution and clay mineralogy of soils differed from those of suspended sediments collected during the storm event. By comparison with the watershed soils, suspended sediments collected during the storm event were enriched in fine particles composed mainly of smectite, and this may explain their P and K desorption behaviour. This suggests particle size and clay species selectivity processes during the transfer of sediment particles from soils to aquatic systems. The amounts of P and K desorbed from the suspended sediments in the three phases of the storm event were much larger than those desorbed from soils. This indicates that rainfall promoted the transfer of these nutrients to the watercourses. 相似文献5.
《Communications in Soil Science and Plant Analysis》2012,43(3-4):449-460
Abstract Fixation and recovery of added phosphorus (P) and potassium (K) were studied in different soil types of pulse‐growing regions. Amounts of P and K fixed increased in all the soils irrespective of type and texture. With the increase in levels of added P and K, maximum P fixation was observed at lower levels of added P (50 mg kg?1). Alfisols showed maximum P‐fixation capacity (92.7%), followed by Vertisols (86.5%) and Inceptisols (76.6%) at 50 mg kg?1 added P. However, K fixation increased with increasing levels of added K up to 200 mg kg?1, and thereafter fixation either decreased or was maintained at similar levels. Vertisols showed higher K fixation than Inceptisols and Alfisols. Fertilizer P requirement per unit increase in available P in soil was highest in Bangalore (3.23) and lowest in Delhi (2.38). Fertilizer K requirement per unit increase in available K in soil was highest in Raipur and Gulbarga (1.75) and lowest in Ranchi (1.28). 相似文献
6.
Mairead Shore Phil Jordan Per-Erik Mellander Mary Kelly-Quinn Karen Daly James Tom Sims David P. Wall Alice Rowena Melland 《Journal of Soils and Sediments》2016,16(5):1643-1654
Purpose
This study investigated the phosphorus (P) source, mobilisation and transport potential of ditch bed sediments as well as surrounding field and bank soils in two agricultural headwater catchments with contrasting soil drainage capacities. This information is important for discerning the potential for ditches to attenuate or augment transfers of P from upstream sources and thus for developing appropriate management strategies for these features.Materials and methods
Phosphorus sources were characterised using the Mehlich3-P, water-soluble P and total P tests. Phosphorus mobilisation potential was characterised using the Mehlich3-AL/P, Mehlich3-Ca/P and DESPRAL P tests. Phosphorus transport potential was characterised using data collected on the presence/absence of surface water in ditches during field surveys and downstream turbidity data.Results and discussion
Ditch sediments had similar P source contents (Mehlich3-P, water-soluble P and total P) to the surrounding field soils and higher P contents than bank soils. However, calcium contents of sediments in the poorly drained catchment reflected the deep sub-soils rather than the surrounding field and bank soils. Mehlich3-Al/P and Mehlich3-Ca/P contents of ditch sediments in the well (non-calcareous) and poorly (calcareous) drained catchments respectively indicated potential for P retention (above thresholds of 11.7 and 74, respectively). However, sediments were less aggregated than field soils and may mobilise more particulate P (PP) during rain events. Nevertheless, the majority of surveyed ditches dried out from March to September 2011; thus, their potential to mobilise PP may be less important than their capacity to attenuate soluble and PP during this time.Conclusions
In these and similar catchments, soluble P attenuation and particulate P mobilisation should be maximised and minimised, respectively, for example, by cleaning out the sediments before they become saturated with P and encouraging vegetation growth on ditch beds. This study also highlighted the influence of deep sub-soils on soluble P retention in ditches and thus the utility of characterising soils below depths normally included in soil classifications.7.
Barbara Palumbo-Roe Joanna Wragg Vanessa J. Banks 《Journal of Soils and Sediments》2012,12(10):1633-1640
Purpose
Past metal mining has left a legacy of highly contaminated sediments representing a significant diffuse source of contamination to water bodies in the UK and worldwide. This paper presents the results of an integrated approach used to define the role of sediments in contributing to the dissolved lead (Pb) loading to surface water in a mining-impacted catchment.Materials and methods
The Rookhope Burn catchment, northern England, UK is affected by historical mining and processing of lead ore. Quantitative geochemical loading determinations, measurements of interstitial water chemistry from the stream hyporheic zone and inundation tests of bank sediments were carried out.Results and discussion
High concentrations of Pb in the sediments from the catchment, identified from the British Geological Survey Geochemical Baseline Survey of the Environment (GBASE) data, demonstrate both the impact of mineralisation and widespread historical mining. The results from stream water show that the stream Pb load increased in the lower part of the catchment, without any apparent or significant contribution of point sources of Pb to the stream. Relative to surface water, the interstitial water of the hyporheic zone contained high concentrations of dissolved Pb in the lower reaches of the Rookhope Burn catchment, downstream of a former mine washing plant. Concentrations of 56???g?l?1 of dissolved Pb in the interstitial water of the hyporheic zone may be a major cause of the deterioration of fish habitats in the stream and be regarded as a serious risk to the target of good ecological status as defined in the European Water Framework Directive. Inundation tests provide an indication that bank sediments have the potential to contribute dissolved Pb to surface water.Conclusions
The determination of Pb in the interstitial water and in the inundation water, taken with water Pb mass balance and sediment Pb distribution maps at the catchment scale, implicate the contaminated sediments as a large Pb supply to surface water. Assessment of these diffuse contaminant sources is critical for the successful management of mining-impacted catchments. 相似文献8.
Rachel R Hurley James J Rothwell Jamie C Woodward 《Journal of Soils and Sediments》2017,17(11):2648-2665
Purpose
Manchester is often heralded as the first industrial city. Large volumes of physical and liquid contaminants were released into its river network throughout the industrial period up to the latter part of the twentieth century. Water quality has improved dramatically in recent decades, but, given their environmental significance, it is important to ascertain the extent to which a legacy of contamination persists in the modern bed sediments.Materials and methods
Fine-grained bed sediments were sampled at 40 sites in the Mersey and Irwell catchments. Sediments were wet sieved to isolate the <63-μm grain size fraction. Metal concentrations were determined using XRF. Particle size characteristics were also measured. Sediments were subjected to a five-step sequential extraction procedure to ascertain the environmental significance of metal concentrations. Alongside archival research of past industry, enrichment factors, multivariate statistical techniques and conditional inferences trees were used to identify sources of heavy metals.Results and discussion
Bed sediment-associated heavy metal(loid) concentrations were as follows: As (9.89–110 mg kg?1), Cr (76.5–413 mg kg?1), Cu (53.1–383 mg kg?1), Pb (80.4–442 mg kg?1) and Zn (282–1020 mg kg?1). Enrichment factors ranged from moderate to extremely severe, with Pb showing the greatest enrichment across the catchments. Chemical mobility was generally low, but metal(loid) partitioning identified the influence of anthropogenic sources. Statistical analysis highlighted a number of point sources associated with former industrial sites that operated during the industrial period. Conditional inference trees highlighted the role of the textile industry on Cu concentrations in addition to indicating the complexity of sources, fluxes and stores of sediment-associated contamination throughout the system.Conclusions
Fine-grained sediment-associated metal(loid)s in the Mersey and Irwell catchments are anthropogenically enriched. Concentrations also exceed sediment quality guidelines. A lack of distinct spatial patterning points to a complex network of contaminant inputs across the catchments, even in the headwaters. Whilst potential modern urban sources are likely to be important, spatial patterns and multivariate/data mining techniques also highlighted the importance of releases from former industrial sites as well as the reworking of historically contaminated floodplains and soils.9.
Purpose
The study aimed to use the Soil and Water Assessment Tool (SWAT) model to simulate erosion processes in an alpine–prealpine catchment in order to provide data and information that may be relevant for managers so as to minimize reservoir siltation and water quality degradation. The main objective was to assess sediment production across the catchment and sediment supply to the main reservoir.Materials and methods
The Barasona reservoir catchment (1,509 km2) is located in the Central Spanish Pyrenees, in the Ebro Basin. This catchment was selected for the case study given the regional significance of the Barasona reservoir and its siltation problems. The catchment has a mountain climate, with strong altitudinal and north–south gradients. The catchment is characterized by heterogeneous topography and lithology, resulting in a varied mosaic of slopes, soil types, and land covers. The Jueu karst system and two small headwater reservoirs were parameterized and calibrated in the model. The SWAT model sediment calibration for the catchment was based on a prior monthly hydrologic calibration, and the model validation was based on the sediment depositional history of the Barasona reservoir.Results and discussion
The simulation period (2003–2006) and the validation period (1993–2002) produced average sediment yields to the reservoir of 643,000 and 575,000 t year?1, respectively. Large variations in sediment production were found between the subcatchments in the Barasona catchment due to differences in rock outcrops, land cover, and slope gradient. Sediment loss in the Jueu karst system was 15,500 t and the two small headwater reservoirs retained 31,200 and 50,300 t. Sediment production in relation to precipitation showed high temporal variability, with specific sediment yields to the Barasona reservoir ranging from 2.74 to 8.25 t ha?1 year?1. Strong lithological control was observed for sediment production in the subcatchments. The main sediment sources were located in the badlands developed on marls in the middle part of the catchment (internal depressions).Conclusions
The proposed model has proved useful for identifying areas where significant erosion processes take place in large alpine–prealpine catchments at a regional level and also for assessing discharge losses by the karst system and the sedimentary role of the small reservoirs. The information obtained through this research will be of interest in assessing the spatial distribution of sediment sources and areas of high sediment yield, which will be useful to establish criteria for remediation strategies. 相似文献10.
《CATENA》2001,45(2):103-121
Equations used to calculate erodibility in the Water Erosion Prediction Project soil erosion model (WEPP) are based on erodibility studies in the USA and may not function well in another region. This study was conducted to: (i) analyze erodibility and infiltration characteristics of some predominant soils of southern Spain, and (ii) test equations used to calculate interrill erodibility in the WEPP model on these soils. The five soils chosen for this study in Andalusia, southwest Spain, were: two terrace soils (referred to as ‘Red and Yellow Alfisols’), an alluvial soil (‘Fluvent’), a shallow hillside soil (‘Inceptisol’), and a cracking clay soil (‘Vertisol’). A static, solenoid operated rainfall simulator was operated at an intensity of approximately 60 mm h−1 during a 60-min dry run followed by a 30-min wet run the next day on 0.75 m2 plots with 30% ridge slopes. Infiltration rates were high (always exceeding 50% except for the wet run of the Fluvent). The Fluvent had the lowest infiltration rate (0.00 mm min−1 at the end of the wet run) and highest soil loss (985 g m−2 h−1 in the dry run and 1557 g m−2 h−1 in the wet run). The Vertisol, Inceptisol and Red Alfisol had low soil loss (415, 605, and 527 g m−2 h−1 in the dry run and 824, 762 and 629 g m−2 h−1 in the wet run, respectively). Soil loss of the Vertisol doubled between dry and wet run and infiltration rate did not stabilize, suggesting that erodibility of Vertisols increases when they are wet. The Yellow Alfisol had lower final infiltration rate in the dry run (0.33 mm min−1) than in the wet run (0.58 mm min−1) and higher soil loss in dry run (1203 g m−2 h−1) than in wet run (961 g m−2 h−1), the reason still being unclear. Soil loss was significantly correlated to silt+very fine sand content (r=0.96), indicating that erodibility of these soils is determined by similar properties as soils in these soil orders in the USA. However, the equation for WEPP-interrill erodibility overestimated erodibility significantly (two to four times), indicating the need to develop new erodibility equations for the Mediterranean region. Infiltration rates were generally high and soil loss rates low compared to reports from the USA, suggesting that limited runoff generation is a primary reason for low erodibility of these soils. 相似文献
11.
Distribution of total mercury in coastal sediments from Jade Bay and its catchment, Lower Saxony, Germany 总被引:1,自引:0,他引:1
Purpose
Sediment cores provide a reliable record of mercury (Hg) contamination and can be used to study long-term Hg pollution and relevant environmental change. In the last hundred years, there were several events which may have contributed to the accumulation of Hg in Jade Bay and its catchment. This work was undertaken to assess the record in total Hg (THg) content in sediments of cores from Jade Bay and its catchment.Materials and methods
A 5-m sediment core from Jade Bay, Lower Saxonian Wadden Sea, southern North Sea and a 12-m core from its catchment area (Wangerland, coastal zone of the Jade Bay) were used to study Hg contents in sediments. Total Hg, grain size distribution, aluminium (Al) and total organic carbon (TOC) were analysed on subsamples of both sediment cores. Total Hg was determined by oxygen combustion-gold amalgamation using DMA-80.Results and discussion
As THg contents of the Jade Bay core were positively correlated to the sum of TOC and Al contents (r 2?=?0.86, p?<?0.001), the Hg data were interpreted using a regional normalisation function with the sum of Al and TOC as the normalisation parameters. Total Hg contents of the Wangerland core were correlated better to Al contents (r 2?=?0.70, p?<?0.001) than to the sum of TOC and Al contents (r 2?=?0.63, p?<?0.05). Therefore, Hg contents in sediments of the Wangerland core were normalised to Al contents. Comparison between enrichment factors and the background range of the sediment cores suggested that Jade Bay was contaminated about 50 years ago, and that Wangerland, or the catchment area of Jade Bay, was contaminated about 300 years ago, if no diagenetic remobilization occurred.Conclusions
Total Hg contents of both cores were low and of no concern to the aquatic environment of Jade Bay. The Hg record was in good agreement with the history of industrial development in the region; thus, Hg deposition could have occurred through atmospheric input, ammunition residues of the Second World War and volcanic emanations, as well as through diagenetic remobilization. 相似文献12.
Joanna P. Siwek Miros?aw ?elazny Wojciech Che?micki 《Water, air, and soil pollution》2011,214(1-4):547-563
The study aimed to determine the influence of catchment characteristics and flood type on the relationship between streamflow and a number of chemical characteristics of streamwater. These were specific electrical conductivity (SC), pH, the concentrations of main ions (Ca2+, Mg2+, Na+, K+, HCO 3 ? , SO 4 2? , and Cl?), and nutrients (NH 4 + , NO 2 ? , NO 3 ? , and PO 4 3? ). These relationships were studied in three small catchments with different geological structure and land use. Several flood types were distinguished based on the factors that initiate flooding and specific conditions during events. Geological factors led to a lower SC and main ion concentrations at a given specific runoff in catchments built of resistant sandstone versus those built of less resistant sediments. A lower concentration of nutrients was detected in the semi-natural woodland catchment versus agricultural and mixed-use catchments, which are strongly impacted by human activity. The strongest correlation between streamflow and the chemical characteristics of water was found in the woodland catchment. Different types of floods were characterized by different ion concentrations. In the woodland catchment, higher SC and higher concentrations of most main ions were noted during storm-induced floods than during floods induced by prolonged rainfall. The opposite was true for the agricultural and mixed-use catchments. During snowmelt floods, SC, NO 3 ? , and most main ion concentrations were higher when the soil was unfrozen in the agricultural and mixed-use catchments versus when the soil was frozen. In the case of the remaining nutrients, lower concentrations of NH 4 + were detected during rain-induced floods than during snowmelt floods. The opposite was true of PO 4 3? . 相似文献
13.
Fingerprinting sediment sources in the outlet reservoir of a hilly cultivated catchment in Tunisia 总被引:1,自引:1,他引:1
Abir Ben Slimane Damien Raclot Olivier Evrard Mustapha Sanaa Irène Lefèvre Mehdi Ahmadi Mouna Tounsi Cornelia Rumpel Abdallah Ben Mammou Yves Le Bissonnais 《Journal of Soils and Sediments》2013,13(4):801-815
Purpose
Approximately 74 % of agricultural soils in Tunisia are affected by water erosion, leading to the siltation of numerous human-made reservoirs and therefore a loss of water storage capacity. The objective of this study was to propose a methodology for estimating the relative contributions of gully/channel bank erosion and surface topsoil erosion to the sediment accumulated in small reservoirs.Materials and methods
We tested an approach based on the sediment fingerprinting technique for sediments collected from a reservoir (which has been in operation since 1994) at the outlet of a catchment (Kamech, 2.63 km2). Sampling concentrated on the soil surface (in both cropland and grassland), gullies and channel banks. A total of 17 sediment cores were collected along a longitudinal transect of the Kamech reservoir to investigate the origin of the sediment throughout the reservoir. Radionuclides (particularly caesium-137, 137Cs) and nutrients (total phosphorus, total nitrogen and total organic carbon (TOC)) were analysed as potential tracers.Results and discussion
The applications of a mixing model with 137Cs alone or 137Cs and TOC provided very similar results: The dominant source of sediment was surface erosion, which was responsible for 80 % of the total erosion within the Kamech catchment. Additionally, we showed that the analysis of a single composite core provided information on the sediment origin that was consistent with the analysis of all sediment layers in the core. We demonstrated the importance of the core sampling location within the reservoir for obtaining reliable information regarding sediment sources and the dominant erosion processes.Conclusions
The dominance of surface erosion processes indicates that conservation farming practices are required to mitigate erosion in the agricultural Kamech catchment. Based on the results from 17 sediment cores, guidelines regarding the number and location of sampling cores to be collected for sediment fingerprinting are proposed. We showed that the collection of two cores limited the sediment source apportionment uncertainty due to the core sampling scheme to <10 %. 相似文献14.
Purpose
Few studies have examined the effects of biochar on nitrification of ammonium-based fertilizer in acidic arable soils, which contributes to NO3 ? leaching and soil acidification.Materials and methods
We conducted a 42-day aerobic incubation and a 119-day weekly leaching experiment to investigate nitrification, N leaching, and soil acidification in two subtropical soils to which 300 mg N kg?1 ammonium sulfate or urea and 1 or 5 wt% rice straw biochar were applied.Results and discussion
During aerobic incubation, NO3 ? accumulation was enhanced by applying biochar in increasing amounts from 1 to 5 wt%. As a result, pH decreased in the two soils from the original levels. Under leaching conditions, biochar did not increase NO3 ?, but 5 wt% biochar addition did reduce N leaching compared to that in soils treated with only N. Consistently, lower amounts of added N were recovered from the incubation (KCl-extractable N) and leaching (leaching plus KCl-extractable N) experiments following 5 wt% biochar application compared to soils treated with only N.Conclusions
Incorporating biochar into acidic arable soils accelerates nitrification and thus weakens the liming effects of biochar. The enhanced nitrification does not necessarily increase NO3 ? leaching. Rather, biochar reduces overall N leaching due to both improved N adsorption and increased unaccounted-for N (immobilization and possible gaseous losses). Further studies are necessary to assess the effects of biochar (when used as an addition to soil) on N. 相似文献15.
《Communications in Soil Science and Plant Analysis》2012,43(6):781-799
Field experiments were conducted during 2005–2007 to test effects of nineteen treatments on turmeric rhizome yield in Alfisol at Utukur and Inceptisol at Jagtial in India. The treatments were comprised of nitrogen (N) at 0, 60, 120 and 180 kg ha?1; phosphorus (P) at 0, 40, 80, and 120 kg ha?1; and potassium (K) at 0, 50, 100, and 150 kg ha?1. Application of 180-120-100 kg ha?1 NPK gave maximum yield of 4302 kg ha?1 in Alfisols, whereas application of 120-80-100 kg ha?1 gave 4817 kg ha?1 in Inceptisols. Regression and principal component (PC) models were calibrated through soil-plant-fertilizer variables. The regression model gave significant R2 of 0.75 in Alfisols compared to 0.88 in Inceptisols, whereas the PC model explained variance of 66.5 percent in Alfisols and 76.3 percent in Inceptisols. Regression model through PC scores gave R2 of 0.54 in Alfisols and 0.47 in Inceptisols. Maximum sustainability yield indexes of 58.8 and 55.5 percent by 180-120-120 kg ha?1 (Alfisol) and 67.1 and 60.6 percent by 120-80-100 kg ha?1 (Inceptisol) were attained based on regression and PC models respectively. 相似文献
16.
Suresh Kumar Dubey Alpana Singh Takeshi Watanabe Susumu Asakawa Ankit Singla Hironori Arai Kazuyuki Inubushi 《Biology and Fertility of Soils》2014,50(2):369-379
Soil characteristics regulate various belowground microbial processes including methanogenesis and, consequently, affect the structure and function of methanogenic archaeal communities due to change in soil type which in turn influences the CH4 production potential of soils. Thus, five different soil orders (Alfisol, Entisol, Inceptisol, Podzol and Vertisol) were studied to assess their CH4 production potential and also the methanogenic archaeal community structure in dryland irrigated Indian paddy soils. Soil incubation experiments revealed CH4 production to range from 178.4 to 431.2 μg CH4 g-1 dws in all soil orders as: Vertisol<Inceptisol<Entisol<Podzol<Alfisol. The numbers of methanogens as quantified using real-time quantitative polymerase chain reaction (qPCR) targeting mcrA genes varied between 0.06 and 72.97 (×106 copies g-1 dws) and were the highest in Vertisol soil and the least in Alfisol soil. PCR-denaturing gradient gel electrophoresis (DGGE)-based approach targeting 16S rRNA genes revealed diverse methanogenic archaeal communities across all soils. A total of 43 DGGE bands sequenced showed the closely related groups to Methanomicrobiaceae, Methanobacteriaceae, Methanocellales, Methanosarcinaceae, Methanosaetaceae and Crenarchaeota. The composition of methanogenic groups differed among all soils and only the Methanocellales group was common and dominant in all types of soils. The highest diversity of methanogens was found in Inceptisol and Vertisol soils. Methane production potential varied significantly in different soil orders with a positive relationship (p?<?0.05) with methanogens population size, permanganate oxidizable C (POXC) and CO2 production. The present study suggested that CH4 production potential of different soils depends on physicochemical properties, methanogenic archaeal community composition and the population size. 相似文献
17.
《Communications in Soil Science and Plant Analysis》2012,43(3-4):521-527
Abstract Modified version of a dichromate digestion procedure, earlier found suitable for simultaneous determination of organic carbon (C) and potentially mineralizable nitrogen (N) in soils, was evaluated for total N determination in 44 diverse soil samples from the semi‐arid region of India. The soils belonged to Vertisols and Alfisols and had a wide range in total N contents. The method involves digestion of the soil sample with an acidified dichromate solution for 30 minutes in a digestion tube in a block digester preheated to 165°C followed by determination of N in the digest by steam distillation procedure. The efficacy of the dichromate procedure for determining total N differed for the two soil types. Excellent correlations were observed between the values of total N obtained by the dichromate procedure (Dichro‐N) and by Kjeldahl method (Kjeldahl‐N) for Vertisols (R2=0.995; n=21) and Alfisols (R2=0.952; n=23). The regression equations describing the relationships between the two soil types can be used to estimate Kjeldahl‐N from Dichro‐N. Both Kjeldahl and the proposed acid dichromate methods were found to be more precise in determining total N in Vertisols than Alfisols. The proposed procedure is rapid and simple and can be used for routine total N determination especially, in soils such as Vertisols. Based on our results the acid digestion procedure certainly deserves a wider evaluation with a range of soil types. 相似文献
18.
Alex Taylor William H. Blake Miranda J. Keith-Roach 《Journal of Soils and Sediments》2014,14(11):1886-1893
Purpose
Estimates of beryllium-7 (7Be) enrichment in soil particle size fractions are important for correction in existing soil redistribution models. Little attention has been given to documenting methods of estimating 7Be enrichment and assessing differences in enrichment between soil types in the context of soil redistribution modelling. Here, we detail a method for estimating 7Be enrichment and correcting soil redistribution estimates.Materials and methods
Beryllium from a solution of BeCl2 was adsorbed to two soils with contrasting texture using a batch procedure. Soil fractions were separated by settling according to Stokes’ Law, and samples of bulk and settled fractions were digested and analysed for Be concentration and for specific surface area.Results and discussion
Both soils demonstrated increasing enrichment of Be with increasing specific surface area. There was a marked difference in enrichment between the soil types with the coarse soil showing greater enrichment in the finer fractions. Calculated enrichment ratios for the coarse soil more than doubled between subfractions of the <63 μm class. Failure to account for the selective transport of fractions during soil redistribution studies could incur substantial errors in soil erosion estimates.Conclusions
Stable Be provides a practical means of estimating 7Be enrichment in soil and subsequent corrections can be incorporated into the conversion model where it is proposed that corrections should be applied to the inventory deficit at each eroding point. The marked difference in enrichment between soil types in these experiments suggested that characterising enrichment and associated correction factors should be done on a site-specific basis. Implementation of the particle size correction procedures requires additional field and laboratory data to standard application of the established soil erosion conversion model. 相似文献19.
Dries Verheyen Jan Diels Endalkachew Kissi Jean Poesen 《Journal of Soils and Sediments》2014,14(11):1869-1885