Solvent-free lipase-catalyzed preparation of diacylglycerols

Various methods have been applied for the enzymatic preparation of diacylglycerols that are used as dietary oils for weight reduction in obesity and related disorders. Interesterification of rapeseed oil triacylglycerols with commercial preparations of monoacylglycerols, such as Monomuls 90-O18, Mulgaprime 90, and Nutrisoft 55, catalyzed by immobilized lipase from Rhizomucor miehei (Lipozyme RM IM) in vacuo at 60 degrees C led to extensive (from 60 to 75%) formation of diacylglycerols. Esterification of rapeseed oil fatty acids with Nutrisoft, catalyzed by Lipozyme RM in vacuo at 60 degrees C, also led to extensive (from 60 to 70%) formation of diacylglycerols. Esterification of rapeseed oil fatty acids with glycerol in vacuo at 60 degrees C, catalyzed by Lipozyme RM and lipases from Thermomyces lanuginosus (Lipozyme TL IM) and Candida antarctica (lipase B, Novozym 435), also provided diacylglycerols, however, to a lower extent (40-45%). Glycerolysis of rapeseed oil triacylglycerols with glycerol in vacuo at 60 degrees C, catalyzed by Lipozyme TL and Novozym 435, led to diacylglycerols to the extent of 相似文献   

Highly efficient preparation of lipophilic hydroxycinnamates by solvent-free lipase-catalyzed transesterification

Various medium- or long-chain alkyl cinnamates and hydroxycinnamates, including oleyl p-coumarate as well as palmityl and oleyl ferulates, were prepared in high yield by lipase-catalyzed transesterification of an equimolar mixture of a short-chain alkyl cinnamate and a fatty alcohol such as lauryl, palmityl, and oleyl alcohol under partial vacuum at moderate temperature in the absence of solvents and drying agents in direct contact with the reaction mixture. Immobilized lipase B from Candida antarctica was the most effective biocatalyst for the various transesterification reactions. Transesterification activity of this enzyme was up to 56-fold higher than esterification activity for the preparation of medium- and long-chain alkyl ferulates. The relative transesterification activities found for C. antarctica lipase were of the following order: hydrocinnamate > cinnamate > 4-hydroxyhydrocinnamate > 3-methoxycinnamate > 2-methoxycinnamate approximately 4-methoxycinnamate approximately 3-hydroxycinnamate > hydrocaffeate approximately 4-hydroxycinnamate > ferulate > 2-hydroxycinnamate > caffeate approximately sinapate. With respect to the position of the hydroxy substituents at the phenyl moiety, the transesterification activity of C. antarctica lipase B increased in the order meta > para > ortho. The immobilized lipases from Rhizomucor miehei and Thermomyces lanuginosus demonstrated moderate and low transesterification activity, respectively. Compounds with inverse chemical structure, that is, 3-phenylpropyl alkanoates such as 3-(4-hydroxyphenyl)propyl oleate and 3-(3,4-dimethoxyphenyl)propyl oleate, were obtained by C. antarctica lipase-catalyzed transesterification of fatty acid methyl esters with the corresponding 3-phenylpropan-1-ols in high yield, as well.     

Solvent-free enzymatic preparation of feruloylated monoacylglycerols optimized by response surface methodology

The ability of immobilized lipase B from Candida antarctica (Novozym 435) to catalyze the direct esterification of glyceryl ferulate (FG) and oleic acid for feruloylated monoacylglycerols (FMAG) preparation in a solvent-free system was investigated. Enzyme screening and the effect of glycerol on the initial reaction rate of esterification were also investigated. Response surface methodology (RSM) was used to optimize the effects of the reaction temperature (55-65 degrees C), the enzyme load (8-14%; relative to the weight of total substrates), oleic acid/(FG + glycerol) (6:1-9:1; w/w), and the reaction time (1-2 h) on the conversion of FG and yield of FMAG. Validation of the RSM model was verified by the good agreement between the experimental and the predicted values of FG conversion and FMAG yield. The optimum preparation conditions were as follows: temperature, 60 degrees C; enzyme load, 8.2%; substrate ratio, 8.65:1 (oleic acid/(FG + glycerol), w/w); and reaction time, 1.8 h. Under these conditions, the conversion of FG and yield of FMAG are 96.7 +/- 1.0% and 87.6 +/- 1.2%, respectively.     

High-yield preparation of wax esters via lipase-catalyzed esterification using fatty acids and alcohols from crambe and camelina oils

Fatty acids obtained from seed oils of crambe (Crambe abyssinica) and camelina (Camelina sativa) via alkaline saponification or steam splitting were esterified using lipases as biocatalysts with oleyl alcohol and the alcohols derived from crambe and camelina oils via hydrogenolysis of their methyl esters. Long-chain wax esters were thus obtained in high yields when Novozym 435 (immobilized lipase B from Candida antarctica) and papaya (Carica papaya) latex lipase were used as biocatalysts and vacuum was applied to remove the water formed. The highest conversions to wax esters were obtained with Novozym 435 (> or =95%) after 4-6 h of reaction, whereas with papaya latex lipase such a high degree of conversion was attained after 24 h. Products obtained from stoichiometric amounts of substrates were almost exclusively (>95%) composed of wax esters having compositions approaching that of jojoba (Simmondsia chinensis) oil, especially when crambe fatty acids in combination with camelina alcohols or camelina fatty acids in combination with crambe alcohols were used as substrates.     

Dialkyl 3,3'-thiodipropionate and dialkyl 2,2'-thiodiacetate antioxidants by lipase-catalyzed esterification and transesterification

Medium- and long-chain dialkyl 3,3'-thiodipropionate antioxidants such as dioctyl 3,3'-thiodipropionate, didodecyl 3,3'-thiodipropionate, dihexadecyl 3,3'-thiodipropionate, and di-(cis-9-octadecenyl) 3,3'-thiodipropionate were prepared in high yield by lipase-catalyzed esterification and transesterification of 3,3'-thiodipropionic acid and its dimethyl ester, respectively, with the corresponding medium- or long-chain 1-alkanols, i.e., 1-octanol, 1-dodecanol, 1-hexadecanol, and cis-9-octadecen-1-ol, in vacuo (80 kPa) at moderate temperatures (60-80 degrees C) without solvents. Immobilized lipase B from Candida antarctica (Novozym 435) was the most active biocatalyst for the preparation of medium- and long-chain dialkyl 3,3'-thiodipropionates showing enzyme activities up to 1489 units/g, whereas the immobilized lipases from Rhizomucor miehei (Lipozyme RM IM) and Thermomyces lanuginosus (Lipozyme TL IM) were by far less active ( approximately 10 enzyme units/g). Maximum conversions to dialkyl 3,3'-thiodipropionates were as high as 92-98% after 4 h of reaction time. Similarly, dihexadecyl 2,2'-thiodiacetate was prepared in high yield using 2,2'-thiodiacetic acid or diethyl 2,2'-thiodiacetate and 1-hexadecanol as the starting materials and Novozym 435 as the biocatalyst.     

Optimization of lipase-catalyzed synthesis of octyl hydroxyphenylpropionate by response surface methodology

The ability of immobilized lipase Candida antarctica (Novozyme 435) to catalyze the direct esterification of hydroxyphenylpropionic acid and octanol in a solvent-free system was investigated in this study. Response surface methodology (RSM) and five-level-four-factor central composite rotatable design (CCRD) were employed to evaluate the effects of synthesis parameters, such as reaction time, temperature, enzyme amount, and pH memory, on percentage molar conversion of phenolic acid esters. Reaction time, temperature, and enzyme amount were the most important variables. On the basis of canonical analysis and ridge max analysis, the optimum synthesis conditions with 95.9% molar conversion were reaction time of 58.2 h, temperature of 52.9 degrees C, enzyme amount of 37.8% (w/w), and pH memory of pH 7.     

Optimization of lipase-catalyzed synthesis of acetylated tyrosol by response surface methodology

The ability of a noncommercial immobilized lipase from Staphylococcus xylosus (SXLi) to catalyze the transesterification of tyrosol and ethyl acetate was investigated. Response surface methodology was used to evaluate the effects of the temperature (40-60 degrees C), the enzyme amount (50-500 UI), and the ethyl acetate/hexane volume ratio (0.2-1) on the tyrosol acetylation conversion yield. Two independent replicates were carried out under the optimal conditions predicted by the model (reaction temperature 54 degrees C, enzyme amount 500 UI, and volume ratio ethyl acetate/hexane 0.2). The maximum conversion yield reached 95.36 +/- 3.6%, which agreed with the expected value (96.8 +/- 3.7%). The ester obtained was characterized by spectroscopic methods. Chemical acetylation of tyrosol was performed, and the products were separated using HPLC. Among the eluted products from HPLC, mono- and diacetylated derivatives were identified by positive mass spectrometry. Tyrosol and its monoacetylated derivative exert similar antiradicalar activity on 2,2-diphenyl-1-picrylhydrazyle.     

Optimization of lipase-catalyzed regioselective acylation of pyridoxine (vitamin B6)

Response surface methodology was successfully applied to optimize lipase-catalyzed regioselective esterification of pyridoxine (PN). Effects of various reaction conditions, including reaction temperature, time, enzyme loading, substrate molar ratio, and water activity, were investigated. A central composite design was employed to search for the optimal conversion of PN. A quadratic polynomial regression model was used for analysis of the experimental data at a 95% level (p < 0.05). The analysis confirmed that the water activity was the most significant factor affecting the conversion of PN. It was also suggested that the conversion was strongly affected by independent variables of temperature, time, substrate molar ratio, and water activity as well as interaction terms of temperature and enzyme loading/substrate molar ratio/water activity, time and enzyme loading/substrate molar ratio, substrate molar ratio, and water activity. The coefficient of determination of the model was found to be 0.963. Three sets of optimum reaction conditions were established, and the verified experimental trials were performed for validating the optimum points. A scale-up experiment was also done under the first set of optimal conditions.     

Effect of molecular sieves on lipase-catalyzed esterification of rutin with stearic acid

Rutin was acylated with stearic acid in the esterification reaction catalyzed by immobilized Candida antarctica lipase B (Novozym 435) in tert-amyl alcohol with and without molecular sieves. The lipophilic rutin stearate was synthesized by this method, which had a potential use in food, cosmetics, and pharmacy. The structure of rutin stearate was characterized by spectral methods of 1H NMR and 13C NMR, Fourier transform infrared, and UV-vis. The results suggested that the regioselectivity of the lipase-catalyzed esterification of rutin was specific at the C(4')-position of the rhamnose moiety. It was found that the addition of molecular sieves increased both the reaction rate and the yield. The time effect of adding molecular sieves in the reaction system on the conversion of rutin stearate was further examined. Instead of adding molecular sieves at the beginning of the reaction, the addition of molecular sieves at 5, 18, 24, 31, and 44 h after the beginning of the reaction was also applied. The final conversion for the case to add molecular sieves at 24 h after the beginning of reaction was the highest, with the conversion yield about 46%.     

Chemistry and phytotoxicity of thaxtomin A alkyl ethers

The thaxtomin phytotoxins (1 and 2) from scab-producing Streptomyces pathogens of the potato are 2,5-dioxopiperazines consisting of modified l-tryptophanyl and l-phenylalanyl units. Thaxtomin A (1) is hydroxylated at C-14, the alpha carbon of the modified l-phenylalanyl moiety. Refluxing thaxtomin A in acidified MeOH, EtOH, and i-PrOH afforded C-14 thaxtomin A methyl- (3a and 3b), ethyl- (4a and 4b), and isopropyl- (5a and 5b) ethers, respectively, in both the 11S,14R (3a, 4a, and 5a) and 11S,14S (3b, 4b, and 5b) configurations. Crystal structures were determined for 3a and 4a. Extensive NMR as well as other spectroscopic data supported structural assignments for all of the derivatives. The 11S,14R-configured derivatives were slightly less potent than the natural products (1 and 2) as inhibitors of lettuce seedling root growth, whereas the activity of the 11S,14S epimers was much reduced, indicating that the configuration at C-14 found in the naturally occurring thaxtomins is essential for biological activity. Among the 11S,14R-configured compounds, potency decreased with an increasing size of the substituted alkoxy group.     

Lipophilic (hydroxy)phenylacetates by solvent-free lipase-catalyzed esterification and transesterification in vacuo

Various long-chain alkyl (hydroxy)phenylacetates were prepared in high yield by lipase-catalyzed transesterification of the corresponding short-chain alkyl hydroxyphenylacetates and fatty alcohols in equimolar ratios. The reactions were performed in vacuo at moderate temperatures in the absence of solvents and drying agents in direct contact with the reaction mixture. Immobilized lipase B from Candida antarctica (Novozym 435) was the most effective biocatalyst for the various transesterification reactions. Generally, Novozym 435-catalyzed transesterifications of short-chain alkyl (hydroxy)phenylacetates with long-chain alcohols led to higher conversions and enzyme activities than the corresponding esterifications. For example, the transesterification activity was up to 4-fold higher than the esterification activity for the formation of oleyl 4-hydroxy-3-methoxyphenylacetate using Novozym 435 as a biocatalyst. The relative transesterification activities were as follows: phenylacetate > 3-methoxyphenylacetate approximately 4-methoxyphenylacetate > 4-hydroxy-3-methoxyphenylacetate > 3-hydroxyphenylacetate approximately 4-hydroxyphenylacetate > 2-methoxyphenylacetate > 3,4-dihydroxyphenylacetate. With respect to the position of methoxy and hydroxy substituents, the transesterification activity of Novozym 435 decreased in the order meta approximately para > ortho. Compounds with inverse chemical structures, for example, tyrosyl oleate, were obtained by Novozym 435-catalyzed esterification and transesterification of fatty acids and their methyl esters, respectively, with 2-phenylethan-1-ols. In contrast to the transesterifications of short-chain alkyl (hydroxy)phenylacetates with fatty alcohols, higher conversions and enzyme activities were observed for the Novozym 435-catalyzed esterifications of (hydroxy)phenylethanols with long-chain fatty acids than the corresponding transesterifications with fatty acid methyl esters.     

Synthesis and antityrosinase activities of alkyl 3,4-dihydroxybenzoates

In insects, tyrosinase plays important roles in normal developmental processes, such as cuticular tanning, scleration, wound healing, production of opsonins, encapsulation and nodule formation for defense against foreign pathogens. Thus, tyrosinase may be regarded as a potential candidate for novel bioinsecticide development. A family of alkyl 3,4-dihydroxybenzoates (C?-C?), new tyrosinsase inhibitors, were synthesized. Their inhibitory effects on the activity of tyrosinase have been investigated. The results showed all of them could inhibit the activity of tyrosianse effectively. The order of potency was nonyl 3,4-dihydroxybenzoate (C?DB) > octyl 3,4-dihydroxybenzoate(C?DB) > heptyl 3,4-dihydroxybenzoate(C?DB) > hexyl 3,4-dihydroxybenzoate (C?DB). The kinetic analysis of these four compounds on tyrosinase was taken to expound their inhibitory mechanism. The research of the control of insects in agriculture was taken as C?DB for example. C?DB could inhibit the development and molting of Plutella xylostella effectively. To clarify its insecticidal mechanism, we researched the expression of tyrosinase in the P. xylostella treated with C?DB by real-time quantitative PCR. The results showed C?DB could inhibit the expression of tyrosinase in the P. xylostella as expected.     

Optimized synthesis of lipase-catalyzed hexyl acetate in n-hexane by response surface methodology

Hexyl acetate, a short-chain ester with fruity odor, is a significant green note flavor compound and widely used in the food industry. The ability for immobilized lipase from Mucor miehei (Lipozyme IM-77) to catalyze the transesterification of hexanol with triacetin was investigated in this study. Response surface methodology and five-level-five-factor central composite rotatable design were adopted to evaluate the effects of synthesis variables, such as reaction time (2-10 h), temperature (25-65 degrees C), enzyme amount (10-50%; 0.024-0.118 BAUN), substrate molar ratio of triacetin to hexanol (1:1 to 3:1), and added water content (0-20%) on percentage molar conversion of hexyl acetate. The results showed that reaction temperature and substrate molar ratio were the most important parameters and that added water content had less of an effect on percent molar conversion. On the basis of canonical analysis, optimum synthesis conditions were as follows: reaction time, 7.7 h; temperature, 52.6 degrees C; enzyme amount, 37.1% (0.089 BAUN); substrate molar ratio, 2.7:1; and added water, 12.5%. The predicted value was 88.9% molar conversion, and the actual experimental value was 86.6% molar conversion.     

Synthesis of structured triacylglycerols by lipase-catalyzed acidolysis in a packed bed bioreactor

Structured triacylglycerols (ST) from canola oil were produced by enzymatic acidolysis in a packed bed bioreactor. A commercially immobilized 1,3-specific lipase, Lipozyme IM, from Rhizomucormiehei, was the biocatalyst and caprylic acid the acyl donor. Parameters such as substrate flow rate, substrate molar ratio, reaction temperature, and substrate water content were examined. High-performance liquid chromatography was used to monitor the reaction and product yields. The study showed that all of the parameters had effects on the yields of the expected di-incorporated (dicaprylic) ST products. Flow rates below 1 mL/min led to reaction equilibrium, and lower flow rates did not raise the incorporation of caprylic acid and the product yield. Incorporation of caprylic acid and the targeted di-incorporated ST was increased by approximately 20% with temperature increase from 40 to 70 degrees C. Increasing the substrate molar ratio from 1:1 to 7:1 increased the incorporation of caprylic acid and the product yield slightly. Water content in the substrate also had a mild influence on the reaction. Water content at 0.08% added to the substrate gave the lowest incorporation and product yield. The use of solvent in the medium was also studied, and results demonstrated that it did not increase the reaction rate at 55 degrees C when 33% hexane (v/v) was added. The main fatty acids at the sn-2 position of the ST were C(18:1), 54. 7 mol %; C(18:2), 30.7 mol %; and C(18:3), 11.0 mol %.     

Stereoselectivity of the generation of 3-mercaptohexanal and 3-mercaptohexanol by lipase-catalyzed hydrolysis of 3-acetylthioesters

The enantioselectivity of the generation of 3-mercaptohexanal and 3-mercaptohexanol, two potent sulfur-containing aroma compounds, by lipase-catalyzed hydrolysis of the corresponding 3-acetylthioesters was investigated. The stereochemical course of the kinetic resolutions was followed by capillary gas chromatography using modified cyclodextrins as chiral stationary phases. The enzyme preparations tested varied significantly in terms of activity and enantioselectivity (E). The highest E value (E = 36) was observed for the hydrolysis of 3-acetylthiohexanal catalyzed by lipase B from Candida antarctica resulting in (S)-configured thiol products. Immobilization of the enzyme (E = 85) and the use of tert-butyl alcohol as cosolvent (E = 49) improved the enantioselectivity. Modification of the acyl moiety of the substrate (3-benzoylthiohexanal) had no significant impact. The sulfur-containing compounds investigated possess attractive odor properties, and only one of the enantiomers exhibits the pleasant citrus type note.     

Optimization of lipase-catalyzed synthesis of ginsenoside Rb1 esters using response surface methodology

In the lipase (Novozyme 435)-catalyzed synthesis of ginsenoside Rb1 esters, different acyl donors were found to affect not only the degree of conversion but also the regioselectivity. The reaction of acyl donors with short carbon chain was more effective, showing higher conversion than those with long carbon chain. Among the three solvent systems, the reaction in tert-amyl alcohol showed the highest conversion rate, while the reaction in the mixed solvent of t-BuOH and pyridine (1:1) had the lowest conversion rate. To allow the increase of GRb1 lipophilicity, we decided to further study the optimal condition of synthesis of GRb1 with vinyl decanoate with 10 carbon chain fatty acids in tert-amyl alcohol. Response surface methodology (RSM) was employed to optimize the synthesis condition. From the ridge analysis with maximum responses, the maximum GRb1 conversion was predicted to be 61.51% in a combination of factors (40.2 h, 52.95 degrees C, substrate mole ratio 275.57, and enzyme amount 39.81 mg/mL). Further, the adequacy of the predicted model was examined by additional independent experiments at the predicted maximum synthesis conditions. Results showed that the RSM was effective to optimize a combination of factors for lipase-catalyzed synthesis of ginsenoside Rb1 with vinyl decanoate.     

Solvent-free acid-catalyzed ring-opening of epoxidized oleochemicals using stearates/stearic acid, and its applications

Toxic solvent and strong acid catalysts causing environmental issues have been mainly used for ring-opening of epoxidized oleochemicals. Here, we demonstrated that magnesium stearate (Mg-stearate) was a high efficient catalyst for solvent-free ring-opening of epoxidized methyl oleate, a model compound of midchain epoxide. Mg-stearate resulted in the highest yield (95%) and conversion rate (99%) toward midchain alkoxyesters under the same conditions (160 °C, 12 h) superior to other fatty acid derivatives such as a Lewis acid (lithium and sodium stearate) and Br?nsted acid (stearic acid). Based on this chemical study, we synthesized biogrease and thermoplastic using epoxidized soybean oil (ESO) and Mg-stearate via one-pot, solvent-free, and purification-free process. Mg-stearate played a significant role as a reactant for epoxide ring-opening and as a thickener when excess loading rate was used; viscosity increased from 1800 to 4500 Pa·s at 25 °C when ESO:Mg-stearate increased from 1:1 equiv to 1:2, then behaved like thermoplastics (T(g) = -27 °C, T(m) = 90 °C) with 1:4.     

Process optimization using response surface design and pilot plant production of dietary diacylglycerols by lipase-catalyzed glycerolysis

Two approaches to shift the acylglycerol equilibrium were tested as follows: addition of monoacylglycerols and lowering of the temperature. None of these approaches were able to shift the equilibrium toward higher diacylglycerol (DAG) contents. The glycerolysis reaction was optimized with five factors using response surface methodology. Evaluation of the resulting model enabled the determination of optimal reaction conditions for glycerolysis aiming at high DAG yield. However, verification of the model showed that the model was unable to take the molecular equilibrium into account but it provided good insight in how process settings can be chosen to, for example, minimize production costs. Optimal conditions were found to be the following: no extra water, low content of glycerol (molar ratio of 2), temperature of 60-65 degrees C, 4-5 h reaction time, and only 5 wt % lipases. Up scaling of the glycerolysis process was performed and revealed that scale-up to a 20 kg production in a pilot plant batch reactor was possible with a similar DAG yield (60 wt %) as in lab scale. Purification of DAG oil using batch deodorization and short path distillation yielded 93 wt % pure DAG oil.     

Factors affecting the resolution of dl-menthol by immobilized lipase-catalyzed esterification in organic solvent.

Among 10 lipases tested, Candida rugosa lipase exhibited the best ability to catalyze the resolution of dl-menthol in organic solvent. The lipase was immobilized on different carriers, and the experiment was carried out with different acyl donors. The high yield and optical purity of the product were achieved in cyclohexane with valeric acid as acyl donor using C. rugosa lipase immobilized on DEAE-Sephadex A-25. The conversion of dl-menthol depended on the water content of immobilized lipase and on the pH of the aqueous solution from which lipase was immobilized. The operational stability of the DEAE-Sephadex A-25 immobilized lipase in catalysis of the esterification reaction showed that >85% activity remained after 34 days of repeated use. The resolution of racemic menthol in organic medium catalyzed by immobilized C. rugosa lipase-catalyzed esterification is very convenient, and it represents a significant improvement in the use of enzyme for the preparative production of optically active menthol. This process is readily applicable to large-scale preparation.     

Zein dynamic adsorption to carboxylic and alkyl coated surfaces

The adsorption of a commercial zein sample on carboxylic (COOH) and alkyl (CH(3)) surfaces was monitored by high time resolution surface plasmon resonance. Zein showed higher affinity and higher mass adsorption on carboxylic than alkyl surfaces. A zein layer specific for each surface was obtained after flushing off loosely bound zein with 75% 2-propanol solutions. Zein deposits were examined under atomic force microscopy. Differences in layer thickness between carboxylic and alkyl surfaces were explained in terms of zein adsorption footprint.