Chemical derivatization analysis of phenols. Part VI. Determination of chlorinated phenolics in pulp and paper effluents

Based on the in-situ acetylation procedure, a method for the determination of 31 chlorinated phenols, guaiacols, catechols, syringols, and vanillins in pulp and paper effluent samples has been successfully developed. Except for 4-chlorocatechol, this procedure provided satisfactory recovery for all phenols at 3 levels of fortification, namely, 400, 40, and 4 micrograms/L. The acetyl derivatives were analyzed by gas chromatography using a 30 m DB-5 capillary column interfaced to an electron-capture detector. Mass spectral abundance data for the characteristic ions of the acetyl derivatives were used for confirmation of compound identities. By operating a mass selective detector in the selected ion monitoring mode, this procedure was further extended to the monochlorinated phenolics. Using a 50 mL effluent sample, the method detection limit was 0.5 micrograms/L for all except the monochlorinated compounds, which had a detection limit of 1 microgram/L. Several effluent samples from a Canadian paper mill were analyzed by this procedure and the results are presented.     

Capillary column gas chromatographic determination of dicamba in water, including mass spectrometric confirmation

A sensitive method is described for determining dicamba at low micrograms/L levels in ground waters by capillary column gas chromatography with electron-capture detection (GC-EC); compound identity is confirmed by gas chromatography-mass spectrometry (GC-MS) using selected ion monitoring. Dicamba residue is hydrolyzed in KOH to form the potassium salt. The sample is then extracted with ethyl ether which is discarded. The aqueous phase is acidified to pH less than 1 and extracted twice with ethyl ether. The combined ethyl ether extracts are concentrated, and the residue is methylated using diazomethane to form the corresponding dicamba ester. The derivatized sample is cleaned up on a deactivated silica gel column. The methylated dicamba is separated on an SE-30 capillary column and quantitated by electron-capture or mass spectrometric detection. Average recoveries (X +/- SD) for ground water samples fortified with 0.40 microgram/L of dicamba are 86 +/- 5% by GC-EC and 97 +/- 7% by GC-MS detections. The EDL (estimated detection limit) for this method is 0.1 microgram dicamba/L water (ppb).     

Gas chromatography/electron-capture negative ion mass spectrometry for the quantitative determination of 2- and 3-hydroxy fatty acids in bovine milk fat

2- and 3-hydroxy fatty acids (2- and 3-OH-FAs) are bioactive substances reported in sphingolipids and bacteria. Little is known of their occurrence in food. For this reason, a method suitable for the determination of OH-FAs at trace levels in bovine milk fat was developed. OH-FAs (and conventional fatty acids in samples) were converted into methyl esters and the hydroxyl group was derivatized with pentafluorobenzoyl (PFBO) chloride to give PFBO- O-FA methyl esters. These derivatives with strong electron affinity were determined by gas chromatography interfaced to mass spectrometry using electron-capture negative ion in the selected ion monitoring mode (GC/ECNI-MS-SIM). This method proved to be highly sensitive and selective for PFBO-O-FA methyl esters. For the analysis of samples, two internal standards were used. For this purpose, 9,10-dideutero-2-OH-18:0 methyl ester (ISTD-1) from 2-OH-18:1(9 c) methyl ester as well as the ethyl ester of 3-PFBO-O-12:0 (ISTD-2) was synthesized. ISTD-1 served as a recovery standard whereas ISTD-2 was used for GC/MS measurements. The whole-sample cleanup consisted of accelerated solvent extraction of dry bovine milk, addition of ISTD 1, saponification, conversion of fatty acids into methyl esters by use of boron trifluoride, separation of the methyl esters of OH-FAs from nonsubstituted FAs on activated silica, conversion of OH-FAs methyl esters into PFBO-O-FA methyl esters, addition of ISTD-2, and measurement by GC/ECNI-MS-SIM. By this method, ten OH-FAs were quantified in bovine milk fat with high precision in the range from 0.02 +/- 0.00 to 4.49 +/- 0.29 mg/100 g of milk fat.     

Rapid determination of methyl mercury in fish and shellfish: method development

The AOAC official first action method for methyl mercury in fish and shellfish was modified to provide more rapid determination. Methyl mercury is isolated from homogenized, acetone-washed tissue by addition of HCl and extraction by toluene of the methyl mercuric chloride produced. The extract is analyzed by electron capture gas chromatography (GC) on 5% DEGS-PS treated with mercuric chloride solution. The quantitation limit of the method is 0.25 micrograms Hg/g. Swordfish, shark, tuna, shrimp, clams, oysters, and NBS Research Material-50 (tuna) were analyzed for methyl mercury by the AOAC official first action method. All products also were analyzed by the modified method and the AOAC official method for total Hg. In addition, selected extracts obtained with the modified method were analyzed by GC with Hg-selective, microwave-induced helium plasma detection. There was no significant difference between the results for the various methods. Essentially all the Hg present (determined as total Hg) was in the organic form. Coefficients of variation from analyses by the modified method ranged from 1 to 7% for fish and shellfish containing methyl mercury at levels of 0.50-2.30 micrograms Hg/g. The overall average recovery was 100.5%.     

Liquid chromatographic determination and stability of the Fusarium mycotoxin moniliformin in cereal grains

Moniliformin is a mycotoxin produced by Fusarium subglutinans and other Fusarium species. A rapid, liquid chromatographic method for its determination in corn and wheat is described. Samples are extracted in acetonitrile-water (95 + 5); following defatting with n-hexane, an aliquot of the extract is evaporated and cleaned up on small C18 and neutral alumina columns successively. Reverse-phase liquid chromatography (LC) is conducted on a C18 column with 10 or 15% methanol or acetonitrile in aqueous ion-pair reagent as mobile phase, with detection by ultraviolet absorption at 229 and 254 nm. Average recoveries of moniliformin (potassium salt) added to ground corn and wheat at levels of 0.05-1.0 micrograms/g were 80% (n = 20) and 85% (n = 12), respectively, and the limit of detection was ca 0.01-0.18 micrograms/g, depending on LC conditions. Analysis of 24 samples of wheat, 4 samples of rye, and 12 samples of corn showed moniliformin in only 2 corn samples (0.06 and 0.2 micrograms/g). Moniliformin was also detected in a sample of artificially damaged (slashed) corn (0.2 micrograms/g) and selected kernels of corn that were field-inoculated with F. subglutinans and F. moniliforme (50 micrograms/g and 0.5 micrograms/g, respectively). In stability studies, moniliformin (potassium salt, 1 microgram/g) in ground corn and ground wheat heated at 50, 100, and 150 degrees C for 0.5-2 h decomposed moderately, e.g., 55% remained in corn after 0.5 h at 100 degrees C.     

Determination of halogenated contaminants in human adipose tissue

A method has been developed for determination of organochlorine contaminants in human adipose tissue. After fat extraction from the tissue with acetone-hexane (15 + 85, v/v), organochlorines were fractionated from fat by gel permeation chromatography with methylene chloride-cyclohexane (1 + 1, v/v) as solvent. After Florisil column cleanup, the GPC extract was analyzed by capillary column gas chromatography using 2 columns of different polarity. Compound identity was confirmed by gas chromatography-mass spectrometry using selected ion monitoring. Recoveries for fortification levels of 10-500 ng/g were greater than 80% except for trichlorobenzene and hexachlorobutadiene (ca 60%).     

Determination of ethyl carbamate in distilled alcoholic beverages by gas chromatography with flame ionization or mass spectrometric detection

Quantitative methods are detailed for determination of ethyl carbamate in distilled alcoholic beverages by capillary gas chromatography with flame ionization detection (GC/FID) and by packed-column gas chromatography/mass spectrometry (GC/MS) using selected ion monitoring. Five g samples of distillate of known ethanol concentration are diluted with water to 25% ethanol (v/v), washed with petroleum ether, and extracted with dichloromethane prior to GC/FID or GC/MS analysis. As necessary, sample extracts that exhibit GC/FID interference are passed through alumina for additional cleanup. When internal standards (tert-butyl carbamate and n-butyl carbamate for GC/FID, or ethyl 13C-15N-carbamate for GC/MS) were used for quantitation, the limit of detection for ethyl carbamate was in the range of 5-25 ppb. Coefficients of variation ranged from 3.5 to 6.0% for GC/FID determinations, and from 1.4 to 3.2% for GC/MS. Correlation between methods for 22 random distillate samples ranging in concentration from approximately 40 to 800 ppb gave a correlation coefficient (r) of 0.996.     

Determination of carbadox-related residues in swine liver by gas chromatography/mass spectrometry with ion trap detection

The ion trap detector (ITD), in combination with a capillary gas chromatograph and under chemical ionization conditions, offers sufficient sensitivity to determine carbadox-related residues as the methyl ester derivative of quinoxaline-2-carboxylic acid at 3 micrograms/kg or higher in porcine liver. A tetradeuterated internal standard of QME effectively compensates for losses incurred during sample preparation. The method produced mean levels of 3.3 (+/- 0.5), 5.5 (+/- 0.8), and 10.1 (+/- 0.9) micrograms/kg for liver fortified at 3, 5, and 10 micrograms/kg. When applied to analysis of samples containing incurred residues of 14C-carbadox at the low microgram/kg level, results were comparable to those obtained by reverse isotope dilution analysis.     

Gas chromatographic determination of ametryn and its metabolites in tropical root crops

Residue analysis of the herbicide ametryn (2-methylthio-4-ethylamino-6-isopropylamino-s-triazine) is widely known but an analytical method for determining its metabolites has not yet been reported in the literature. A method has been developed for the extraction and determination of ametryn and 3 metabolites, 2-methylthio-4-amino-6-isopropylamino-s-triazine (GS-11354), 2-methylthio-4,6-diamino-s-triazine (GS-26831), and 2-methylthio-4-amino-6-ethylamino-s-triazine (GS-11355) in taniers , yams , cassava. Residues were extracted from crops with ethyl acetate-toluene (3 + 1 v/v), using a Polytron homogenizer and anhydrous sodium sulfate added for drying. The extracts were cleaned up by automated gel permeation chromatography on Bio-Beads SX-3 gel in the same solvent system. Quantitative determination was performed by gas chromatographic (GC) analysis on a column packed with 5% DEGS -PS on 100-120 mesh Supelcoport using either an N-P detector or a flame photometric detector ( FPD ) in the sulfur mode. Minimum detection by the flame photometric detector is 10 ng each for ametryn , GS-11354, and GS-11355 and 21 ng for GS-26831; by the N-P detector, 0.3 ng of each component gives easily quantitatable peaks. On a parts per million basis, starting with 25 g sample, the FPD detected a minimum level of 0.04 microgram/g each for ametryn , GS-11354, and GS-11355, and 0.08 microgram/g for GS-26831. The N-P detector could detect 0.0024 microgram/g for all 4 compounds. In addition to superior sensitivity, instrumental conditions allowed the complete separation of components in 10 min, for the N-P detector; more than 30 min was required for the FPD . Recoveries from fortified crops ranged from 67 to 111% at levels of 0.1-1.0 microgram/g.     

Simultaneous determination of alachlor, metolachlor, atrazine, and simazine in water and soil by isotope dilution gas chromatography/mass spectrometry

A multiresidue method was developed for the simultaneous determination of low parts per billion (ppb) concentrations of the herbicides alachlor, metolachlor, atrazine, and simazine in water and soil using isotope dilution gas chromatography/mass spectrometry (GC/MS). Known amounts of 15N,13C-alachlor and 2H5-atrazine were added to each sample as internal standards. The samples were then prepared by a solid phase extraction with no further cleanup. A high resolution GC/low resolution MS system with data acquisition in selected ion monitoring mode was used to quantitate herbicides in the extract. The limit of detection was 0.05 ppb for water and 0.5 ppb for soil. Accuracy greater than 80% and precision better than 4% was demonstrated with spiked samples.     

Liquid chromatographic determination of sulfamoyldapsone in swine tissues

A liquid chromatographic (LC) method is described for the quantitative determination of sulfamoyldapsone (2-sulfamoyl-4,4'-diaminodiphenyl sulfone) in swine muscle, liver, kidney, and fat. Sulfamoyldapsone was extracted from tissues with acetonitrile saturated with n-hexane. The extract was washed with n-hexane saturated with acetonitrile, concentrated, and cleaned up by alumina column chromatography. Sulfamoyldapsone was separated on an ODS column by using acetonitrile-methanol-water (6 + 18 + 76) and was detected at 292 nm. Overall average recovery of sulfamoyldapsone added to tissues at levels of 0.1 and 0.5 microgram/g was 93.3% +/- 6.0. Detection limit was 0.02 microgram/g in these tissues.     

Multiresidue analysis of pesticides in soil by gas chromatography with nitrogen-phosphorus detection and gas chromatography mass spectrometry

A rapid multiresidue method for the simultaneous determination of 25 fungicides and insecticides in soil was developed. Soil samples are extracted by sonication with a water-acetonitrile mixture, and the pesticides are partitioned into dichloromethane. Final determination was made by gas chromatography (GC) with nitrogen-phosphorus detection (NPD). Confirmation analysis of pesticides was carried out by GC-MS in the selected ion monitoring (SIM) mode. The identification of compounds was based on retention time and on comparison of the primary and secondary ions. The average recovery by the GC-NPD method obtained for these compounds varied from 68.5% to 112.1% with a relative standard deviation between 1.8% and 6.2%. The GC-NPD method presents good linearity over the range assayed 50-2000 microg/L, and the detection limit for the pesticides studied varied from 0.1 to 10.4 microg/kg. The proposed method was used to determine pesticide levels in soil samples from experimental greenhouse pepper cultivation.     

Flame absorption spectroscopic determination of cadmium, copper, iron, lead, and zinc in mussels

A rapid method is proposed for determination of Cd, Cu, Fe, Pb, and Zn in mussel samples. The elements are extracted with concentrated nitric acid in borosilicate glass tubes at 90 degrees C for 1 h, and determined by flame atomic absorption spectroscopy. Detection limits for a 300 mg sample corresponded to 0.3 microgram Cd/g, 0.7 microgram Cu/g, 33 microgram Fe/g, 0.7 microgram Pb/g, and 6 micrograms Zn/g. The coefficient of variation for 20 independent analyses was 7% for Cd, 7% for Cu, 6% for Fe, 14% for Pb, and 8% for Zn. Recoveries were 107 +/- 3% for Cd, 90 +/- 3% for Cu, 94 +/- 1% for Fe, 90 +/- 5% for Pb, and 96 +/- 3% for Zn. The accuracy of the method was determined by analyzing NBS Oyster Tissues.     

Analysis of pesticides in honey by solid-phase extraction and gas chromatography-mass spectrometry

An analytical method for the simultaneous determination of 51 pesticides in commercial honeys was developed. Honey (10 g) was dissolved in water/methanol (70:30; 10 mL) and transferred to a C(18) column (1 g) preconditioned with acetonitrile and water. Pesticides were subsequently eluted with a hexane/ethyl acetate mixture (50:50) and determined by gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode (GC-MS-SIM). Spiked blank samples were used as standards to counteract the matrix effect observed in the chromatographic determination. Pesticides were confirmed by their retention times, their qualifier and target ions, and their qualifier/target abundance ratios. Recovery studies were performed at 0.1, 0.05, and 0.025 microg/g fortification levels for each pesticide, and the recoveries obtained were >86% with relative standard deviations of <10%. Good resolution of the pesticide mixture was achieved in approximately 41 min. The detection limits of the method ranged from 0.1 to 6.1 microg/kg for the different pesticides studied. The developed method is linear over the range assayed, 25-200 microg/L, with determination coefficients of >0.996. The proposed method was applied to the analysis of pesticides in honey samples, and low levels of a few pesticides (dichlofluanid, ethalfluralin, and triallate) were detected in some samples.     

Simultaneous determination of fumonisin B(1) and hydrolyzed fumonisin B(1) in corn products by liquid chromatography/electrospray ionization mass spectrometry

A method for the simultaneous determination of fumonisin B(1) (FB(1)) and its major hydrolysis product (HFB(1)), which is known to be formed during alkaline treatment of fumonisin-containing corn meal, was devised to analyze the levels of these mycotoxins in corn products available on the German market. Liquid chromatography/electrospray mass spectrometry in combination with selected ion monitoring (SIM) was used for unambiguous detection of FB(1) and HFB(1) after extraction of samples with acetonitrile/methanol/water (25:25:50) and solid-phase C18 cleanup. Quantitation was carried out using labeled fumonisin FB(1)-D(6) as an internal standard. The detection limits achieved with this method were 8 ng/g for HFB(1) (signal-noise ratio = 5:1) and 5 ng/g for FB(1) (s/n = 5:1) using the protonated molecule signals m/z 406 and 722 in the SIM mode. A screening of several corn-containing foodstuffs, among them extrusion products and alkali-processed corn food such as tortilla chips, showed HFB(1) and FB(1) contamination with levels of 8-80 and 5-450 ng/g, respectively.     

Determination of daminozide in apples by gas chromatography/chemical ionization mass spectrometry

A method using gas chromatography/chemical ionization mass spectrometry (GC/CIMS) for the determination of daminozide residues in apples has been developed. Daminozide was separated from the sample matrix by water extraction and cation exchange, converted to the methyl ester by treatment with HCl-methanol, and determined by GC/CIMS using succinonitrile as an internal standard. The detection level was 0.05 ppm. Recoveries were 92-104% from apples spiked at the 0.05-0.5 ppm levels. Of the 25 apple samples analyzed, only 2 were positive for daminozide (1.04 and 0.32 ppm).     

Multiresidue determination of pesticides in soil by gas chromatography-mass spectrometry detection

An analytical multiresidue method for the simultaneous determination of various classes of pesticides in soil was developed. Pesticides were extracted from soil with ethyl acetate. Soil samples were placed in small columns, and the extraction was carried out assisted by sonication. Pesticides were determined by gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode. Spiked blank samples were used as standards to counteract the matrix effect observed in the chromatographic determination. Pesticides were confirmed by their retention times, their qualifier and target ions, and their qualifier/target abundance ratios. Recovery studies were performed at 0.2, 0.1, and 0.05 microg/g fortification levels of each pesticide, and the recoveries obtained ranged from 87.0 to 106.2% with a relative standard deviation between 2.4 and 10.6%. Good resolution of the pesticide mixture was achieved in approximately 41 min. The detection limits of the method ranged from 0.02 to 1.6 microg/kg for the different pesticides studied. The developed method is linear over the range assayed, 25-1000 microg/L, with determination coefficients >0.999. The proposed method was used to determine pesticide levels in real soil samples, taken from different agricultural areas of Spain, where several herbicides and insecticides were found.     

Multielement concentrations in liver and kidney tissues from five species of Canadian slaughter animals

The present paper describes results of a national survey conducted between 1982 and 1989 to determine residues of arsenic, cadmium, copper, mercury, lead, selenium, and zinc in Canadian slaughter animals. Liver and kidney tissues from cattle, swine, poultry, horses, calves, and sheep were tested. Arsenic was found in most avian and porcine samples, and their respective means of 0.36 and 0.26 micrograms/g in liver were 7 to 12 times higher than mean concentrations found in the other species. Cadmium was found in the tissues of all species; however, levels were consistently highest in equine samples with mean values of 3.09 and 27.7 micrograms/g in liver and kidney, respectively. Copper levels greater than 150 micrograms/g were found predominantly in liver from calves and sheep, with values considerably lower in the remaining species. Mercury levels were low or not detected in all species except horses. Ninety % of equine kidneys and 54% of equine livers had mercury concentrations greater than 0.01 microgram/g, with mean values of 0.18 and 0.06 microgram/g, respectively. Lead was found in tissues of all species; however, values greater than 2 micrograms/g were found only in 2 kidneys from adult cattle and 1 kidney from a horse. Selenium, tested only in cattle, was found at mean concentrations of 0.28 microgram/g in liver, and 0.92 microgram/g in kidney. Relatively high zinc levels were found in livers of horses, pigs, and calves, with respective mean concentrations of 67.3, 65.6, and 70.2 micrograms/g.     

Bacillus stearothermophilus disk assay for determining ampicillin residues in fish muscle.

The Bacillus stearothermophilus disk assay for penicillin in milk (AOAC official method) was adapted for the determination of ampicillin in fish muscle. The method was evaluated in 2 species of cultured fish: channel catfish and striped bass. Recoveries of ampicillin ranged from 99 to 104% when muscle specimens from both species were spiked at concentrations of 0.025-1.00 micrograms/g. The lower limit of determination (LOD) was 0.025 micrograms/g. The assay was applied to monitor the elimination of ampicillin from the muscle of striped bass after intravascular administration (dosage of 10 mg/kg body weight). The mean concentrations in the muscle declined from 1.160 micrograms/g at 2 h to 0.063 micrograms/g at 18 h. The half-life of ampicillin in the muscle was 3.6 h. Ampicillin concentrations were below LOD at 24 h. No inhibitory activity was observed in the muscle of control fish.     

Automated gas chromatographic method for the determination of ethanol in canned salmon

A method has been developed for the determination of ethanol in canned salmon using automated headspace sampling in conjunction with analysis by gas chromatography. The thermal process for the commercial sterilization of canned salmon is shown to provide an effective extraction of the ethanol so that the fluid removed from the can may be used as the analytical sample with minimal preparation prior to analysis. Ethanol content is measured directly, without the need for an internal standard, by either GC/MS or GC/FID. The headspace autoanalyzer allows for a rapid determination of ethanol with greater reproducibility than could be obtained with manual injection systems. The GC/MS technique can also provide an advantage in that simultaneous single ion monitoring of the two major ethanol ions provides additional protection from interferences. To assess the applicability of this technique to other substrates, Atlantic sea scallop meats were also successfully analyzed by this technique.