Western red cedar extractives associated with durability in ground contact

Western red cedar (WRC) is well known for its natural durability. However, the roles of all the extractives that may be associated with this durability are not fully understood. The literature primarily credits the thujaplicins, with a lesser role for the lignans; however, previous work has identified highly durable material with low thujaplicin content. To elucidate the relative importance of various extractives, the decay resistance of WRC stakes at four test sites was compared with data on the content of specific extractives to determine whether there was any detectable association. The concentration of plicatic acid, a lignan, was associated with the decay resistance of WRC lumber in ground contact. An unidentified, unquantified compound (B) appeared to be similarly associated with decay resistance. The thujaplicins were only weakly associated with the decay resistance of WRC in ground contact.     

A capillary gas chromatographic method for thujaplicins in western red cedar extractives

Summary A quantitative method for the analysis of thujaplicins and thujic acid is described. The samples were methylated with diazomethane and analyzed using naphthalene as an internal standard. The procedure was useful in the analysis of western red cedar extractives.     

Wood properties of juvenile and mature heartwood in Robinia pseudoacacia L.

The aim of this study is to characterise the properties of juvenile and mature heartwood of black locust (Robinia pseudoacacia L.). Content, composition and the subcellular distribution of heartwood extractives were studied in 14 old-growth trees from forest sites in Germany and Hungary as well as in 16 younger trees of four clone types. Heartwood extractives (methanol and acetone extraction) were analysed by HPLC-chromatography. UV microspectrophotometry was used to topochemically localise the extractives in the cell walls. The natural durability of the juvenile and mature heartwood was analysed according to the European standard EN 350-1. Growth as well as chemical analyses showed that, based on extractives content, the formation of juvenile wood in black locust is restricted to the first 10–20 years of cambial growth. In mature heartwood, high contents of phenolic compounds and flavonoids were present, localised in high concentrations in the cell walls and cell lumen of axial parenchyma and vessels. In juvenile wood, the content of these extractives is significantly lower. Juvenile wood had a correspondingly lower resistance to decay by Coniophora puteana (brown rot fungus) and Coriolus versicolor (white rot fungus) than mature heartwood.     

The influence of heartwood on the pulping properties of Acacia melanoxylon wood

The pulping wood quality of Acacia melanoxylon was evaluated in relation to the presence of heartwood. The sapwood and heartwood from 20 trees from four sites in Portugal were evaluated separately at 5% stem height level in terms of chemical composition and kraft pulping aptitude. Heartwood had more extractives than sapwood ranging from 7.4% to 9.5% and from 4.0% to 4.2%, respectively, and with a heartwood-to-sapwood ratio for extractives ranging from 1.9 to 2.3. The major component of heartwood extractives was made up of ethanol-soluble compounds (70% of total extractives). Lignin content was similar in sapwood and heartwood (21.5% and 20.7%, respectively) as well as the sugar composition. Site did not influence the chemical composition. Pulping heartwood differed from sapwood in chemical and optical terms: lower values of pulp yield (53% vs 56% respectively), higher kappa number (11 vs. 7), and lower brightness (28% vs 49%). Acacia melanoxylon wood showed an overall good pulping aptitude, but the presence of heartwood should be taken into account because it decreases the raw-material quality for pulping. Heartwood content should therefore be considered as a quality variable when using A. melanoxylon wood in pulp industries     

Variation of heartrot,sapwood infection and polyphenol extractives with provenance of Acacia mangium

Infection of heartwood by decay fungi (heartrot) is a concern for growers of Acacia mangium for solid‐wood products as the incidence can be high in some regions of Indonesia. Variation of heartrot incidence for different provenances of A. mangium was determined using two field trials in Sumatra, Indonesia. In a Riau Province trial of 21 provenances, the effect of provenance was statistically significant for natural heartrot incidence, which ranged from 1.6% to 27.2%. In a smaller trial using artificial inoculation in South Sumatra, heartwood infection incidence ranged from 39.4% to 70.8% across six provenances and both wound type and provenance were statistically significant factors. There was also significant variation in sapwood infection length related to provenance. Wood extractives (yield, total phenols, protein‐precipitable tannin and 2,3‐trans‐3,4′,7,8‐tetrahydroxyflavanone) were quantified from a subsample of trees for each trial. However, no significant differences in extractive concentration were detectable according to provenance and evidence for a relationship between heartwood extractives and heartrot incidence was generally poor. While further studies need to be completed to establish the basis for heartrot incidence, results from these trials allow for recommendations on provenance selection to reduce heartrot incidence and provide information for further genetic selection programmes.     

Effects of heartwood extractive fractions of Thuja plicata and Chamaecyparis nootkatensis on wood degradation by termites or fungi

The effect of selective removal of extractives on termite or decay resistance was assessed with matched samples of Thuja plicata Donn ex D. Don and Chamaecyparis nootkatensis (D.Don) Spach heartwood. Samples were extracted using a variety of solvents and then exposed to the subterranean termite Coptotermes formosanus Shiraki in a no-choice feeding test or to the brown-rot fungus Postia placenta (Fr.) M. Larsen & Lombard in a soil bottle test. At the same time, the effect of naturally occurring variations in heartwood extractives on termite or decay resistance was evaluated by testing samples from the inner and outer heartwood of five trees of each species against C. formosanus and P. placenta and analyzing matched wood samples for their extractive content. The results suggest that the methanol-soluble extractives in T. plicata and C. nootkatensis play an important role in heartwood resistance to attack by C. formosanus and P. placenta. Total methanol-soluble extractive content of the heartwood was positively correlated with both termite and decay resistance; however, there was much unexplained variation and levels of individual extractive components were only weakly correlated with one another. Further studies are under way to develop a better understanding of the relationships between individual extractive levels and performance.     

The effect of Sirex noctilio infestation and fire damage on the chemical composition of South African-grown Pinus patula pulpwood

The infection and association between the wood wasp Sirex noctilio and the fungus Amylostereum areolatum is responsible for large-scale tree mortality in the Midlands of the KwaZulu-Natal province in South Africa. An exploratory investigation on the effect of the infestation of trees by the wood wasp and its associated fungus on the chemical composition of Pinus patula pulpwood was undertaken. Various tree classes representing different levels of physiological growth stress from this infestation were compared. Together with the above stress agents, fire damage to P. patula trees was also considered as a possible cause of changes in pulpwood chemical composition. Chemical analyses to determine the Seifert cellulose and Klason lignin contents as well as the levels of water- and solvent-soluble extractives were conducted using published Tappi standard methods. The results indicated only negligible differences between infestation levels (tree classes) with respect to Seifert cellulose and Klason lignin contents. In contrast, highly significant differences were observed for solvent- and water-borne extractives. It is evident from the results that P. patula trees engage a defence strategy to counter the effects of the infestation and the resulting physiological stress. The results of the chemical analyses suggest that trees should not be harvested any younger than the intended rotation age of 12 years and at the time of harvesting all the biomass, including the infected wood, should be sent to the pulp mill. Fire-damaged trees can be utilised in the same way as healthy trees when applying the TMP process provided the charcoal on the outer bark is removed. The usefulness of a biplot to simultaneously display the various tree classes and their chemical composition is illustrated.     

Impact of Ceratocystis wilt on eucalyptus tree growth and cellulose pulp yield

In this study, we determined the effects of Ceratocystis fimbriata wilt on volumetric growth and cellulose pulp yield of eucalyptus. Seven‐year‐old healthy and infected trees were separated into different classes of severity, and the individual volume of each whole tree with bark was determined. Volumetric losses were found regardless of the class of disease severity, resulting in reduction in volumetric growth of the trees from 65% to 87%, depending on the infection level. Two approaches were used for evaluating the effects of the disease on cellulose pulp yield: (i) evaluation of wood basic density and chemical composition, contents of ethanol/toluene extractives and Klason lignin, and the alkaline load and screen yield across Kraft pulping to kappa number 18 ± 0.5 for both healthy and discoloured materials; (ii) determination of the alkaline load and yield across Kraft pulping to kappa number 18 ± 0.5 of woods with different levels of discoloration (0, 25, 50, 75 and 100% of discoloured wood). Discoloured wood presented lower basic density, higher ethanol/toluene extractives and Klason lignin, higher alkaline load and lower pulp screened yield at kappa number 18 ± 0.5 compared with the healthy ones. Increasing the fraction of infected wood in chip furnishes resulted in proportionally increased alkaline load demand and decreased screen yields. Adding 50% of infected wood in the chip furnish resulted in 23.8% increase in the alkali load and 13.7% reduction in the pulp screen yield at kappa number 18 ± 0.5. The results obtained have proved that the disease reduces volumetric growth, increases wood consumption and reduces yield in eucalyptus pulp production.     

Chemical characterization of wood and extractives of fast-growing Schizolobium parahyba and Pinus taeda

This study aims to evaluate the chemical composition of wood and extractives of Pinus taeda and Schizolobium parahyba (guapuruvu) as potential feedstock for new applications in the biorefinery industry. For this purpose, their content of α-cellulose, hemicellulose, insoluble lignin, hot water solubility, NaOH_1% solubility, inorganic materials (ash), and monomeric sugars by high-performance liquid chromatography was quantified. Attenuated total reflectance infrared spectroscopy and thermogravimetric analysis were also used to complete the physicochemical characterization of the studied woods. The extractives were obtained by soxhlet extraction with ethanol:toluene and dichloromethane and identified with pyrolysis-gas chromatography/mass spectroscopy technique. The results showed that guapuruvu wood has the higher amount of hemicellulose (16%) when compared to pine wood (10%), which resulted in higher solubility in alkali solution. Furthermore, in relation to other biomasses, the two woods presented more percentage of lignin and minor content of hemicelluloses. The P. taeda wood presented the highest percentage of extractives mainly composed of fatty acids and aromatic hydrocarbons, while guapuruvu wood had a higher percentage of phenolic compounds and also fatty acids. Both the materials have low content of extractives with dichloromethane and were mainly composed of lipophilic compounds.     

Fate and influence of western red cedar extractives in mechanical pulping

The methanol extractives from western red cedar mechanical pulps were found to be radically different in composition to the extractives obtained from the heartwood. The major heartwood extractive components, the tropolones and lignans, were not present in the extractives from the pulps. However, the proportion of a brown polymer doubled. The low and high molecular weight methanol extractives components from the pulps were separated using methyl tert-butyl ether. The low molecular fraction contained mostly guaiacyl-based compounds with dihydroquercetin, thujic acid, 3-hydroxy-1-(4′-hydroxy-3′-methoxyphenyl)-2-oxopropane and 4-ethyl-2-methoxy-6-hydroxyphenol being positively identified. The brown polymeric portion had molecular weights ranging from 1,000 to 10,000. Infrared analysis indicated that the polymers were formed from lignans. Examination of the changes in diffuse reflectance UV-visible and infra red spectra of the pulps on extraction with methanol, suggested that the colour resides in insoluble polymers formed from plicatic acid/plicatin during refining. Received 18 December 1998     

Degradation of lipophilic wood extractive constituents in Pinus sylvestris by the white-rot fungi Bjerkandera sp. and Trametes versicolor

The white-rot fungi Trametes versicolor and Bjerkandera spp. are among the most frequent decomposers of angiosperm wood in forest ecosystems and in wood products in service. Wood extractives have a major impact on wood properties and wood utilization. This work evaluated the ability of two white-rot fungal strains (Bjerkandera sp. strain BOS55 and T. versicolor strain LaVec94-6) to degrade the main lipophilic extractive constituents in Scots pine (Pinus sylvestris L.). The time course of wood decay and wood extractive degradation was monitored in stationary batch assays incubated for eight weeks. The strains tested eliminated high levels of total resin, 34 to 51% in two weeks. Wood triglycerides were the most readily degraded extractive components (over 93% elimination in only two weeks). Free fatty acids and resin acids, which are potential fungal inhibitors, were also rapidly decomposed by the fungal strains. Sterols were used more slowly, nonetheless, the fungal degradation of this extractive fraction ranged from 50 to 88% after four weeks. Received 19 March 1999     

Polyporus schweinitzii Fr. und Sparassis crispa (Wulf. in Jacq.) ex Fr. als Fäuleerreger in einem Douglasienbestand (Pseudotsuga menziesii (Mirb.) Franco) mit hohem Stammfäuleanteil1

Polyporus (Phaeolus) schweinitzii and Sparassis crispa as frequent decay fungi in Douglas fir. Of fifty, 55 ears old trees in a Pseudotsuga menziesii stand. 90% showed decay of the heart- wood of the butt. The possibility of transmission of the most frequent decay fungi, P. schwei- nitzii and S. crispa, which also are frequent parasites in the roots and butts of pine, from the roots of the Pinus sylvestris trees of the previous crop into the roots of the Douglas fir is discussed. A first identification of the fungi was made possible by storing the stem discs under moist conditions. The mycelia of P. schweinitzii and S. crispa grew out of the decayed wood and possessed a characteristic form and colour.     

Genetic variability of growth and wood chemical properties in a clonal population of Eucalyptus urophylla × Eucalyptus grandis in the Congo

Thirty-four Eucalyptus urophylla × Eucalyptus grandis hybrids were evaluated with a view to selecting for improved growth and wood-quality traits for plantations in the Congo. Height, circumference at breast height and volume were measured at 12, 27, 37, 49 and 60 months. Lignin content, the syringyl/guaiacyl ratio and total extractives content were predicted by near-infrared spectroscopy using wood powder samples collected from trees at breast height. While wood chemical properties were stable and under strong genetic control, growth traits were not. The genetic correlation between lignin content and growth was weak and negative, whereas the environmental correlation was also weak but positive. The genetic improvement of E. urophylla × E. grandis clones, based on growth features, leads to a limited decrease in lignin content and syringyl content and to a limited increase in extractives content.     

Radial patterns of carbon isotopes in the xylem extractives and cellulose of Douglas-fir

Heartwood extractives (nonstructural wood components) are believed to be formed from a combination of compounds present in the adjacent sapwood and materials imported from the phloem. The roles of local compounds and imported material in heartwood formation could have important implications for the wood quality of species having naturally durable wood. Stable isotope composition (delta(13)C) was analyzed to assess radial variation in sapwood extractives, and to estimate the relative importance of adjacent sapwood extractives and imported photosynthate in the formation of heartwood extractives. Cellulose and extractives from the outer 39 annual rings of six Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) trees were isolated and their delta(13)C composition determined. Although the extractives and the cellulose showed different absolute delta(13)C values, the patterns of change over time (as represented by the annual rings) were similar in most cases. Within an annual ring, carbon isotope ratios of extractives were correlated with the cellulose isotope ratio (R2 = 0.33 in sapwood, R2 = 0.34 in heartwood for aqueous acetone-soluble extractives; R2 = 0.41 in sapwood for hot-water-soluble extractives). These data suggest that some sapwood extractives are formed when the wood ring forms, and remain in place until they are converted to heartwood extractives many years later. Sapwood extractives appear to be important sources of materials for the biosynthesis of heartwood extractives in Douglas-fir.     

Distribution,properties and formation of some wood extractives

Summary In the future, wood will be used largely for the manufacture of fibre products and particle board. The quality of wood used to meet increasing world demand will vary considerably. One feature of quality that can affect utilisation is the amount and type of wood extractives present. The distribution and variation in composition of extractives in the tree, as well as their effect on pulp manufacture, durability and surface films, are summarized. Methods to reduce the effects of some extractives in existing trees are described. Extractives can be reduced in plantation material by minimizing heartwood formation and by using silvicultural methods which result in small amounts of extractives being formed in this tissue. Current knowledge on heartwood formation is summarized.Paper presented to the 3rd Plenary Meeting of the International Academy of Wood Science held at the N. C. State University, Raleigh, March 11, 1971.     

Treatment of wounds on Acer rubrum with Trichoderma viride1

Wounds on 90 Acer rubrum trees were inoculated with Trichoderma viride in July and August 1973 to determine the effect of the fungus on the development of decay. The trees were 45 years old and 15 cm diam at 1.4 m aboveground. Each tree had 12 wounds, 1.4 cm in diam and 5 cm deep. After a year 28 trees were harvested and isolations were made from the discolored, and decayed wood associated with each wound. Trichoderma viride was reisolated from all wounds that were inoculated with it. Hymenomycetes were isolated frequently from decayed wood associated with wounds not inoculated with T. viride. No Hymenomycetes were isolated from wounds inoculated with T. viride.     

Fomes annosus (Fr.) Cke. und andere Stammfäulepilze in einem Douglasienbestand,Pseudotsuga menziesii (Mirb.) Franco1

Fomes annosus (Fr.) Cke. and other decay fungi in a Douglas fir stand, Pseudotsuga menziesii (Mirb.) Franco. 40% of the trees in a 40 years old Pseudotsuga menziesii stand showed butt rot. 85 trees were analysed for decay fungi. Fomes annosus, the most frequent fungus, also invaded the sap wood. Factors of the soil favourable to the rot and the possibility of transmission of the most frequent decay fungus, Fomes annosus, from (a) neighbouring spruce stands, (b) from the roots of Scots pine from the previous crop arc discussed. Caniophora puteana was isolated from about 10% of the butt rots. The importance of Calocera viscosa which grew out of the central decay of twelve trees as a decay fungus is still under investigation.     

The concentration of phenolics in brown-rot decay resistant and susceptible Scots pine heartwood

The concentrations of three individual stilbenes, pinosylvin (PS), pinosylvin monomethyl ether (PSM), and pinosylvin dimethyl ether (PSD), and the total concentration of phenolic compounds were determined in 34-year-old Scots pines which were known to have either decay-resistant or susceptible heartwood. The sample trees were selected from two progeny tests among 783 trees; the decay resistance of which had been screened earlier in vitro against a brown-rot fungus Coniophora puteana. Ten decay-resistant and ten susceptible trees from each of the progeny tests were analysed. In the heartwood of the resistant trees, the average total concentration of the stilbenes was 7.5 and 6.4 mg/g of dry weight, while in the heartwood of the susceptible trees the respective values were 5.0 and 4.7 mg/g. The difference between the decay resistant and susceptible trees was statistically significant in both progeny tests. The difference in concentration of total phenolics, analysed by the Folin-Ciocalteu method, was also significant. A high concentration of phenolics was connected to the low hygroscopicity of wood. The results support the argued hypothesis that the stilbenes make a contribution to the differences in the decay rate of natural wood substrate. On the other hand, the results show that the stilbenes alone do not explain the variation in decay rate.     

Dissolution and dispersion of spruce wood components into hot water

Summary The dissolution and dispersion of components from Norway spruce (Picea abies) wood were examined in laboratory experiments to determine the factors influencing variations in dissolved and colloidal substances in mechanical pulp suspensions. Finely ground, fresh spruce wood was suspended in water at 90 °C and was agitated intensively for up to 12 h, after which the concentrations of dissolved and dispersed lipophilic extractives, lignans, carbohydrates and lignins were determined. Sapwood and heartwood were studied separately. Effects of pH and added electrolytes on the dissolution and dispersion of wood components were also investigated.Higher amounts of lipophilic extractives, and especially of triglycerides, were dispersed from sapwood than from heartwood. The release of lipophilic extractives continued for up to 3 h, after which the concentrations in the suspensions leveled off. At this stage the composition of the dissolved and dispersed lipophilic extractives equaled that of the wood. The amount of lipophilic extractives in the suspensions increased with increased pH, in the range of 4.5–6.7, but was lower in the presence of electrolytes. The dissolution of carbohydrates continued even beyond 3 h of agitation. The high water temperature induced hydrolytic reactions, thereby releasing especially arabinose. The release of arabinose through the hydrolytic cleavage from polysaccharides was more extensive at pH 4.5 than at pH 5.5 and 6.7. More polysaccharides containing galacturonic acid units (pectins) were dissolved at a higher pH. Much more polysaccharides containing glucose, most probably starch, were present in the sapwood suspensions. The dissolution of lignins also continued throughout the 12 h experiment. The measured UV-absorption, after extraction of lignans, was roughly the same for sapwood and heartwood suspensions. Slightly less lignins were released in the presence of electrolytes. Lignans were released only from heartwood.     

Genetic variation in wood color and its correlations with tree growth and wood density of <Emphasis Type="Italic">Calycophyllum spruceanum</Emphasis> at an early age in the Peruvian Amazon

Calycophyllum spruceanum (Benth.) Hook. f. ex K. Shum. is an important timber-tree species in the Peruvian Amazon Basin. Markets currently prefer wood with a uniform, light yellow color, but these preferences may change in the future. As farmers and industry commonly use wood from young trees, it is important to investigate genetic and environmental variation in juvenile-wood properties to assess whether tree improvement programs could make adjustments to changing preferences. A provenance/progeny test was established to evaluate genetic variation in growth and wood properties of young trees, the strength of their genetic control as well as their interrelationships both at the genetic and the phenotypic level in different planting zones. This paper presents analyses of variation in wood color at 39 months, and their correlations with tree growth and wood basic density. CIELab means for lightness ranging from black to white (L), green to red hues (a*) and blue to yellow hues (b*) were 67.63, 5.34 and 22.12, respectively; means for chroma (C) and hue angle (h)* were 22.76 and 76.43, respectively (C and h* were estimated from a* and b*). Significant variation due to provenances and especially due to families within provenances was found in some wood color characteristics, and some color characteristics also differed significantly among planting zones. Genetic correlations indicate that, in general, selection of faster growing trees and/or trees with denser wood would have little effect on wood color and its uniformity. In general, wood color had relatively low heritability (h _i ²): among all trees, h _i ² = 0.31 for L; and variance due to families was not significant for a* and b*. Genetic control of color was highest in the planting zone where trees grew most rapidly: h _i ² = 0.48 and 0.52 for a* and b*, respectively; but variance due to families was not significant for L. Results suggest that selection based on wood color would be more effective in zones with more fertile soils and higher rainfall.