Resistant Starch Content Is Related to Granule Size in Barley

Physical properties of resistant starch (RS) were examined in a range of barley genotypes to determine the contribution of starch and seed physical characteristics to the RS component. Thirty‐three barley genotypes were studied, which varied significantly in their RS, amylose, and starch contents and grain yield. From 33 genotypes, 13 exhibiting high RS were selected for detailed physicochemical analysis of starch. In high‐RS varieties, granule size and number were unimodal, compared with normal starches from a reference genotype, which showed a bimodal distribution. Principal component analysis (PCA) showed that a higher content of granules <15 µm was positively correlated with RS and amylose content, whereas the proportion of granules 15–45 µm was negatively correlated with the RS and amylose contents. Physical fractionation of starches by centrifugation into different population sizes demonstrated that size alone is not an accurate indicator of the population of A‐type and B‐type granules within a given genotype. PCA also showed that large 15–45 µm granules were positively correlated with seed thickness and that thousand grain weight was positively correlated with seed width. High‐RS and high‐amylose genotypes showed variation in overall yield and starch content, with some genotypes showing yield comparable to the reference genotype. Analysis of amylopectin chain length distribution showed that high amylose or RS content was not associated with a higher proportion of amylopectin long chains when compared with either waxy or reference (normal) barley genotypes. This study highlights useful markers for screening barley genotypes with favorable starch characteristics.     

Barley grain constituents, starch composition, and structure affect starch in vitro enzymatic hydrolysis

The relationship between starch physical properties and enzymatic hydrolysis was determined using ten different hulless barley genotypes with variable carbohydrate composition. The ten barley genotypes included one normal starch (CDC McGwire), three increased amylose starches (SH99250, SH99073, and SB94893), and six waxy starches (CDC Alamo, CDC Fibar, CDC Candle, Waxy Betzes, CDC Rattan, and SB94912). Total starch concentration positively influenced thousand grain weight (TGW) (r(2) = 0.70, p < 0.05). Increase in grain protein concentration was not only related to total starch concentration (r(2) = -0.80, p < 0.01) but also affected enzymatic hydrolysis of pure starch (r(2) = -0.67, p < 0.01). However, an increase in amylopectin unit chain length between DP 12-18 (F-II) was detrimental to starch concentration (r(2) = 0.46, p < 0.01). Amylose concentration influenced granule size distribution with increased amylose genotypes showing highly reduced volume percentage of very small C-granules (<5 μm diameter) and significantly increased (r(2) = 0.83, p < 0.01) medium sized B granules (5-15 μm diameter). Amylose affected smaller (F-I) and larger (F-III) amylopectin chains in opposite ways. Increased amylose concentration positively influenced the F-III (DP 19-36) fraction of longer DP amylopectin chains (DP 19-36) which was associated with resistant starch (RS) in meal and pure starch samples. The rate of starch hydrolysis was high in pure starch samples as compared to meal samples. Enzymatic hydrolysis rate both in meal and pure starch samples followed the order waxy > normal > increased amylose. Rapidly digestible starch (RDS) increased with a decrease in amylose concentration. Atomic force microscopy (AFM) analysis revealed a higher polydispersity index of amylose in CDC McGwire and increased amylose genotypes which could contribute to their reduced enzymatic hydrolysis, compared to waxy starch genotypes. Increased β-glucan and dietary fiber concentration also reduced the enzymatic hydrolysis of meal samples. An average linkage cluster analysis dendrogram revealed that variation in amylose concentration significantly (p < 0.01) influenced resistant starch concentration in meal and pure starch samples. RS is also associated with B-type granules (5-15 μm) and the amylopectin F-III (19-36 DP) fraction. In conclusion, the results suggest that barley genotype SH99250 with less decrease in grain weight in comparison to that of other increased amylose genotypes (SH99073 and SH94893) could be a promising genotype to develop cultivars with increased amylose grain starch without compromising grain weight and yield.     

Preparation and Properties of Starch Phosphates Using Waxy,Common, and High‐Amylose Corn Starches. I. Oven‐Heating Method

The structure and physicochemical properties of waxy, common, and high‐amylose corn starch phosphates prepared by oven heating were studied. Starch phosphates prepared by either slurry or dry‐mixing treatment before oven heating were also compared. The slurry treatment more efficiently incorporated phosphorus into starch relative to the dry‐mixing treatment under the reaction conditions studied. In general, the phosphorylated starch prepared by the slurry treatment exhibited a lower gelatinization temperature, a higher peak viscosity, a lesser degree of retrogradation, and improved freeze‐thaw stability compared with those prepared by the dry‐mixing treatment. Phosphorylation occurred probably in both amylose and amylopectin, and the amount and location of incorporated phosphate groups varied with starch types likely due to their different amylose and amylopectin contents. Waxy starch was more prone to phosphorylation, followed by common and high‐amylose starches, respectively.     

Influence of genotype and processing on the in vitro rate of starch hydrolysis and resistant starch formation in peas (Pisum sativum L.).

The formation of resistant starch (RS) and the rate of starch hydrolysis were evaluated in vitro in a wild type of green-seeded pea genotype RRRbRb BC3 (33-Am) with 32.7% amylose content and in two mutants RRrbrb BC3 (23-Am) and rrRbRb BC3 (65-Am) with amylose contents of 23.3 and 65.1%, respectively. Pea samples were intact or homogenized and subjected either to autoclaving or to boiling at atmospheric pressure. The amount of RS (total starch basis) varied from 6.2 to 12.9% in the 23-Am products and from 31.2 to 33.4% in the 65-Am products. The RS level of the 33-Am product with a regular amylose content was 11.0%. Both the 23-Am and the 65-Am products were abundant sources of dietary fiber (39 and 34%, dry matter basis, respectively) versus 23% in the regular pea product. The amylose/amylopectin ratio was an important determinant of the rate of starch hydrolysis. The hydrolysis indices (HI) and predicted glycemic indices were lowest in the 65-Am peas (HI range = 42-59) as compared to the 23-Am peas (HI range = 53-84). It is concluded that the pea genotypes covered a wide range in starch availability, which is likely to affect nutritional parameters such as glycemic responses and colonic delivery of starch.     

Effects of Cultivar and Processing Condition on Physicochemical Properties and Starch Fractions in Parboiled Rice

Starch can be classified into rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) according to its resistance to amylolytic enzymes. This study investigated the effects of cultivar and feedstock under varying parboiling conditions on the physicochemical properties and starch fractions of parboiled rice. Rice (rough or brown) was soaked, steamed under pressure, dried immediately or stored at room temperature for 24 hr prior to drying, and then treated with or without a repeated steam cycle prior to milling. The storage treatment significantly increased the retrograded amylopectin enthalpy and amylose‐lipid complex melting temperature of parboiled rice. Parboiled rice samples prepared from brown rice feedstock had higher peak melting temperatures but lower enthalpy values of retrograded amylopectin than samples prepared from rough rice after the storage treatment. The pasting viscosity of parboiled rice was most affected by the repeated autoclaving treatment and cultivar. Starch fractions in parboiled rice were significantly affected by cultivar and storage and by the interactions of cultivar and parboiling conditions. The storage treatment significantly increased SDS and generally decreased RDS in parboiled rice. Parboiled rice with different SDS and RS contents can be produced by varying rice cultivar and parboiling conditions.     

Structure and functional properties of sorghum starches differing in amylose content

Starches were isolated from grains of waxy, heterowaxy, and normal sorghum. To study the relationship between starch structure and functionality and guide applications of these starches, amylose content, amylopectin chain-length distributions, gelatinization and retrogradation, pasting properties, dynamic rheological properties, and in vitro enzyme digestion of raw starches were analyzed. Heterowaxy sorghum starch had intermediate amylose content, pasting properties, and dynamic rheological properties. Stress relaxation was a useful indicator of cooked starch cohesiveness. Cooked heterowaxy sorghum starch (10% solids) had a viscoelastic-solid type of character, whereas cooked waxy sorghum starch behaved like a viscoelastic liquid. Amylopectin of normal sorghum starch had a slightly higher proportion of chains with degree of polymerization (DP) of 6-15 (45.5%) compared with amylopectin of heterowaxy starch (44.1%), which had a gelatinization peak temperature 2 degrees C higher than normal sorghum starch. Heterowaxy sorghum starch contained significantly lower rapidly digestible starch (RDS) and higher resistant starch (RS) than waxy sorghum starch.     

水氮耦合对强筋冬小麦子粒蛋白质和淀粉品质的影响

在高肥力条件下,研究水氮耦合对小麦子粒产量、蛋白质含量及组成、蛋白质质量、淀粉含量及组成和淀粉品质的影响。结果表明,无论施氮与否,灌水均显著提高小麦子粒产量,同时显著降低子粒粗蛋白、单体蛋白及湿面筋含量;但不同灌水量间(W1、W2、W3)差异不显著。在低灌水频次(W0、W1)条件下,施氮具有明显的增产效应;而高灌水频次(W2、W3),施氮的增产效应不显著。随着灌水次数增加,谷蛋白总量保持稳定,而谷蛋白组分产生了显著的变化,其中可溶性谷蛋白含量呈上升趋势,不溶性谷蛋白含量和谷蛋白聚合指数呈下降趋势,粉质仪参数(形成时间和稳定时间)也呈下降趋势。小麦子粒蛋白质含量及组分和子粒品质均因施氮(N.168.kg/hm2)而有不同程度的提高,其中非面筋蛋白(清蛋白和球蛋白)的增加幅度高于面筋蛋白(醇溶蛋白和谷蛋白),可溶性谷蛋白增加幅度高于不溶性谷蛋白,即降低了谷蛋白聚合指数。水氮对子粒的淀粉含量及其组成的影响存在明显的交互效应。在不施氮肥条件下,随灌水次数增加,支链淀粉和总淀粉含量呈上升趋势;施氮条件下,各灌水处理(W1、W2、W3)的总淀粉和支链淀粉含量均显著高于不灌水处理(W0),但各灌水处理间差异不显著。随灌水次数增加,直链淀粉含量和直/支比均呈下降趋势,黏度仪指标(峰值黏度、稀值、最终黏度和反弹值)均呈上升趋势。施氮在低灌水频次(W0、W1)条件下促进支链淀粉的合成,同时降低直链淀粉含量和直/支比;高灌水频次(W2、W3)条件下则相反。     

Rice starch, amylopectin, and amylose: molecular weight and solubility in dimethyl sulfoxide-based solvents

Dimethyl sulfoxide (DMSO), with either 50 mM LiBr, 10% water, or both, was used as solvent for multi-angle laser-light scattering (MALLS) batch mode analysis of rice starch, and amylopectin and amylose weight-average molecular weight (Mw). DMSO/50 mM LiBr was a better solvent for these measurements than was DMSO/10% water, based on this solvent's ability to dissolve starch and to reduce the size of starch aggregates. Starch concentration decreased and amylose:amylopectin ratio increased when starch suspended in DMSO was centrifuged or filtered prior to size-exclusion chromatography (SEC)-MALLS analysis. A higher amylose:amylopectin ratio made starch more soluble, and the higher this ratio, the lower the Mw of eluted amylopectin. For SEC analysis of Mw, fractions of starch amylopectin and amylose dispersed in DMSO-based solvents yielded better results than starch dispersed directly into the solvents, because dispersion of these fractions decreased starch aggregation. When these two starch components were fractionated and then dissolved separately in DMSO/50 mM LiBr, the Mw of dispersed amylopectin ranged from 40 to 50 million, and that of amylose was ca. 3 million, whereas starch from three rice varieties of varying amylose content ranged from 60 to 130 million. We recommend that SEC evaluation of amylopectin and amylose be accomplished with fractionated samples as in this study; such evaluations were superior to evaluations of natural mixtures of amylopectin and amylose.     

小麦籽粒淀粉主要特性的QTL定位

为给分子标记辅助选择和小麦品质育种提供依据,以小麦杂交组合99G44×京771重组自交系群体(RIL)为材料,利用SSR分子标记技术,采用复合区间作图法对小麦籽粒淀粉主要特性进行了QTL分析。结果表明,检测出1个与总淀粉含量有关的显著加性效应QTSA.-6B,位于6B染色体,位点总贡献率为10.91%;检测出1个与支链淀粉含量有关的显著加性效应QAmp.-1B,位于1B染色体,位点的总贡献率为9.54%;检测出1个与直链淀粉含量有关的显著加性效应QAms.-6B,位于6B染色体,位点总贡献率为7.29%;检测出1个与支/直比有关的显著加性效应QAmp./Ams.-6B,位于6B染色体,位点的总贡献率为12.69%;检测出1个与高峰粘度有关的显著加性效应QPV-1B,位于1B染色体,位点的总贡献率为5.91%;检测出2个与崩解值有关的显著加性效应QBD-1B和QBD-2D,位于1B、2D染色体,位点总贡献率为12.95%;检测出1个与回生值有关的显著加性效应QSB-1B,位于1B染色体,位点总贡献率为6.99%;检测出1个与低谷粘度有关的显著加性效应QTV-3B,位于3B染色体,位点的总贡献率为5.16%;检测出1个与膨胀势有关的显著加性效应QSP-1B,位于1B染色体,位点总贡献率为7.02%。本研究定位的淀粉品质性状的标记可作为小麦品质分子育种的工具。     

Physicochemical Properties and In Vitro Starch Digestibility of Cooked Rice from Commercially Available Cultivars in Canada

The influence of amylose content, cooking, and storage on starch structure, thermal behaviors, pasting properties, and rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) in different commercial rice cultivars was investigated. Long grain rice with high‐amylose content had a higher gelatinization temperature and a lower gelatinization enthalpy than the other rice cultivars with intermediate amylose content (Arborio and Calrose) and waxy type (glutinous). The intensity ratio of 1047/1022 cm^–1 determined by Fourier Transform Infrared (FT‐IR), which indicated the ordered structure in starch granules, was the highest in glutinous and the lowest in long grain. Results from Rapid ViscoAnalyser (RVA) showed that the rice cultivar with higher amylose content had lower peak viscosity and breakdown, but higher pasting temperature, setback, and final viscosity. The RDS content was 28.1, 38.6, 41.5, and 57.5% in long grain, Arborio, Calrose, and glutinous rice, respectively, which was inversely related to amylose content. However, the SDS and RS contents were positively correlated with amylose content. During storage of cooked rice, long grain showed a continuous increase in pasting viscosity, while glutinous exhibited the sharp cold‐water swelling peak. The retrogradation rate was greater in rice cultivars with high amylose content. The ratio of 1047/1022 cm^–1 was substantially decreased by cooking and then increased during storage of cooked rice due to the crystalline structure, newly formed by retrogradation. Storage of cooked rice decreased RDS content and increased SDS content in all rice cultivars. However, no increase in RS content during storage was observed. The enthalpy for retrogradation and the intensity ratio 1047/1022 cm^–1 during storage were correlated negatively with RDS and positively with SDS (P ≤ 0.01).     

Starch Characteristics Influencing Resistant Starch Content of Cooked Buckwheat Groats

Cooked buckwheat groats are suggested to contain a greater amount of resistant starch (RS) than cereal grains. High RS content, in addition to dietary fibers present in groats, contributes to the low‐calorie, high‐fiber food status of buckwheat. Six buckwheat genotypes exhibiting high, medium, and low RS content of cooked groats were selected, and starches were isolated to determine their functional properties to explore the possible cause of high RS content of cooked buckwheat groats. Apparent and actual amylose contents were 27.4 and 31.6–34.5% in high, 27.4–28.6 and 32.5–33.7% in medium, and 21.4–25.6 and 24.5–32.0% in low RS genotypes, respectively. Genotypes of high RS content exhibited greater amylose leaching based on total starch content during cooking than genotypes of low RS content, mainly because of higher amylose content in the former than latter. Genotypes of low RS content exhibited a relatively high content of amylose‐lipid complexes, as determined with a differential scanning calorimeter (DSC). Gelatinization enthalpy and degree of amylopectin retrogradation determined with a DSC were not related to RS content. An evident relationship was observed between RS content of cooked groats and amylose retrogradation determined by gel hardness (r = 0.91, P < 0.05), cohesiveness (r = 0.89, P < 0.05), and syneresis (r = 0.88, P < 0.05). Increases in starch amylose content, amylose leaching capacity, and amylose retrogradation, as well as a decrease in the amount of amylose‐lipid complexes all appear to be related to high RS content of cooked buckwheat groats.     

Solubilization Effects on Molecular Weights of Amylose and Amylopectins of Normal Maize and Barley Starches

Structural characteristics of starches have been important to determine their physicochemical and functional properties. Solubilization procedures were tested to find a higher solubilization percentage and thereafter to study the structural characteristics of amylose and amylopectin. Size‐exclusion chromatography with refractive index (SEC‐RI) system using a pullulan standard curve was tested to study the amylose molar mass. Also, a microbatch system using a MALLS detector was used to determine the molar mass and gyration radius of starch and amylopectin. Microwave heating produced higher solubility percentages than autoclaving, and there was a difference between both starches. The sample solubilized with microwave heating presented higher molar mass and gyration radius values than autoclave samples, showing that this process for structural studies provided information representative of the initial starch sample. When starch components were separated, amylose showed lower purity than amylopectin. Lower purity was obtained for amylose separated from barley starch, but no difference was obtained for purity of amylopectin separated from both starches. Barley amylopectin had a higher solubility percentage than maize amylopectin. Molar mass of barley amylose was 1.03 × 10⁵ g/mol and for maize of 2.25 × 10⁵ g/mol. Molar mass values of amylopectin separated from both starches were lower than the starch counterparts, although the same solubilization procedure (microwave heating) was used. The difference might be due to depolymerization during separation of starch components.     

Properties of Starches from Several Low‐Amylose Rice Cultivars

The starch properties of five low‐amylose rice cultivars, Yawarakomachi, Soft 158, Hanabusa, Aya, and Snow Pearl, were compared with those of two normal amylose rice cultivars, Nipponbare and Hinohikari. There were no large differences in the distributions of the amylopectin chain length determined by high‐performance anion‐exchange chromatography, and the starch gelatinization properties determined by differential scanning calorimetry, between normal and low‐amylose rice cultivars. Results obtained using rapid viscosity analysis indicated that low‐amylose rice starches had lower peak viscosity, breakdown, and setback values than normal amylose rice starches. Starch granules from low‐amylose rice cultivars had a higher susceptibility to glucoamylase than those from normal amylose rice cultivars. The results of this study showed some differences between normal and low‐amylose rice starches in pasting properties and enzymatic digestibility.     

Extrusion of Cross‐Linked Hydroxypropylated Corn Starches II. Morphological and Molecular Characterization

A series of cross‐linked hydroxypropylated corn starches were extruded with a Leistritz micro‐18 co‐rotating extruder. Extrusion process variables including moisture (30, 35, and 40%), barrel temperature (60, 80, and 100°C), and screw design (low, medium, and high shear) were investigated. Scanning electron microscopy (SEM) of extruded starches showed a gel phase with distorted granules and granule fragments after extrusion at 60°C. After extrusion at 100°C only a gel phase was observed with no granular structures remaining. High performance size exclusion chromatography (HPSEC) equipped with multiangle laser light‐scattering (MALLS) and refractive index (RI) detectors showed extruded starches degraded to different extents, depending on extrusion conditions. The average molecular weight of the amylopectin of unextruded native corn starch was 7.7 × 10⁸. Extrusion at 30% moisture, 100°C, and high shear reduced the molecular weight of amylopectin to 1.0 × 10⁸. Hydroxypropylated normal corn starch extruded at identical conditions showed greater decreases in amylopectin molecular weight. With the addition of cross‐linking, the amylopectin fractions of the extruded starches were less degraded than those of their native and hydroxypropylated corn starch counterparts. Similarly, increasing moisture content during extrusion lowered amylopectin degradation in the extruded starches. Increasing temperature during extrusion of cross‐linked hydroxypropylated starches at high moisture content (e.g., 40%) lowered amylopectin molecular weights of the extruded starches, whereas increasing extrusion temperature at low moisture content (30%) resulted in less degraded molecules. This difference was attributed to the higher glass transition temperatures of the cross‐linked starches.     

Structural Characteristics,Properties, and In Vitro Digestibility of Rice

Using rice samples derived from normal rice cultivars and endosperm starch mutant, we investigated key factors contributing to the enzyme digestibility of steamed rice grains. The chemical composition of polished rice grains, structural features of endosperm starch, and enzyme digestibility of steamed rice grains were examined. The protein content of polished rice grains was 4.6–9.1%, amylose content was 4–27%, the DP_n of purified amylose was 900–1,600, the amylopectin short/long chain ratio was 1.2–5.9, and the enzyme digestibilities of steamed polished rice grains were 0.9–12.6 °Brix. Amylose content and RVA parameters (viscosity, breakdown, and setback) correlated significantly with enzyme digestibility of steamed rice grains. Multiple regression formulas were constructed to predict digestibility of steamed rice grain as a function of the molecular characteristics of the starch. When both amylose content and the short/long chain amylopectin ratio were used as predictor variables, they accounted for >80% of the observed variance in digestibility of steamed rice grains. Multiple regression revealed that the more digestible rice samples had starch with a lower amylose content and more short‐chain amylopectin. Reassociation of amylose‐lipid complex and recrystallization of amylopectin in the stored steamed rice grains was monitored by differential scanning calorimetry (DSC), and the observed retrogradation properties were related to the structural characteristics of starch and to the enzyme digestibility of steamed rice grains.     

Comparison of Amylose Determination Methods and the Development of a Dual Wavelength Iodine Binding Technique

It has long been recognized that limitations exist in the analytical methodology for amylose determination. This study was conducted to evaluate various amylose determination methods. Purified amylose and amylopectin fractions were obtained from corn, rice, wheat, and potato and then mixed in proportion to make 10, 20, 30, 50, and 80% amylose content starch samples for each source. These samples, considered amylose standards, were analyzed using differential scanning calorimetry (DSC), high-performance size-exclusion chromatography (HPSEC), and iodine binding procedures to generate standard curves for each of the methods. A single DSC standard equation for cereal starches was developed. The standard curve of potato starch was significantly different. Amylose standard curves prepared using the iodine binding method were also similar for the cereal starches, but different for potato starch. An iodine binding procedure using wavelengths at 620 nm and 510 nm increased the precision of the method. When HPSEC was used to determine % amylose, calculations based on dividing the injected starch mass by amylose peak mass, rather than calculations based on the apparent amylose/amylopectin ratio, decreased the inaccuracies associated with sample dispersion and made the generation of a cereal amylose standard curve possible. Amylose contents of pure starch, starch mixtures from different sources with different amylose ranges, and tortillas were measured using DSC, HPSEC, iodine binding, and the Megazyme amylose/amylopectin kit. All the methods were reproducible (±3.0%). Amylose contents measured by these methods were significantly different (P < 0.05). Amylose measurements using iodine binding, DSC, and Megazyme procedures were highly correlated (correlation coefficient >0.95). DSC and traditional iodine binding procedures likely overestimated true amylose contents as residual butanol in the amylose standards caused interference. The modified two-wavelength iodine binding procedure seemed to be the most precise and generally applicable method. Each amylose determination method has its benefits and limitations.     

Composition,Molecular Structure,Properties, and In Vitro Digestibility of Starches from Newly Released Canadian Pulse Cultivars

Pulse starches were isolated from different cultivars of pea, lentil, and chickpea grown in Canada under identical environmental conditions. The in vitro digestibility and physicochemical properties were investigated and the correlations between the physicochemical properties and starch digestibility were determined. Pulse starch granules were irregularly shaped, ranging from oval to round. The amylose content was 34.9–39.0%. The amount of short A chains (DP 6‐12) of chickpea starch was much higher than the other pulse starches, but the proportions of B1 and B2 chains (DP 13‐24 and DP 25‐36, respectively) were lower. The X‐ray pattern of all starches was of the C type. The relative crystallinity of lentil (26.2–28.3%) was higher than that of pea (24.4–25.5%) and chickpea starches (23.0–24.8%). The swelling factor (SF) in the temperature range 60–90°C followed the order of lentil ≈ chickpea > pea. The extent of amylose leaching (AML) at 60°C followed the order of pea ≈ chickpea > lentil. However, in the temperature range 70–90°C, AML followed the order of lentil > pea > chickpea. The gelatinization temperatures followed the order of lentil > pea > chickpea. The peak viscosity, setback, and final viscosity of pea starch were lower than those of the other starches. Lentil starch exhibited lower rapidly digestible starch (RDS) content, hydrolysis rate, and expected glycemic index (eGI). The resistant starch (RS) content of both lentil cultivars was nearly similar. However, pea and chickpea cultivars exhibited wide variations in their RS content. Digestibility of the pulse starches were significantly correlated (P < 0.05) with swelling factor (60°C), amylose leaching (60°C), gelatinization temperature, gelatinization enthalpy, relative crystallinity, and chain length distribution of amylopectin (A, B1, and B2 chains).     

Structure and Physicochemical Properties of Starches from Sieve Fractions of Oat Flour Compared with Whole and Pin-Milled Flour

One oat cultivar grown in Idaho (three field sites) was pin-milled and separated by sieving to investigate whether starch from oat bran differs from the remainder of kernel. Ground oat particles were classified into three sieve fractions: 300–850 μm, 150–300 μm and <150 μm). β-Glucan content in sieve fractions was analyzed and starch was extracted from kernels without milling and from kernels of each sieve fraction. β-Glucan contents of 300–850, 150–300, and <150 μm sieve fractions were 4.2, 2.3, and 0.8%, respectively. Therefore, starch in bran (300–850 μm sieve fraction) and endosperm (<150 μm sieve fraction) were separated. Starch isolated from entire kernels had significantly higher apparent and absolute amylose content than starch from the 300–850 μm sieve fraction. Starch from different sieve fractions was not significantly different in the apparent amylose, absolute amylose, amylopectin molecular weight, gyration radii, starch gelatinization, and amylose-lipid complex thermal transition temperatures. Starch from the 150–300 μm sieve fraction had significantly lower peak, final, and setback viscosity compared with the starch isolated from the 300–850 μm and <150 μm sieve fractions. Starch removed from the oat bran fraction during β-glucan enrichment may have different applications compared with starch obtained from other kernel compartments. Because pin-milling decreased apparent amylose content and shortened amylopectin branch chains, its potential to alter starch structure should be considered.     

Approaches for Modification of Starch Composition in Durum Wheat

Manipulation of starch composition in cereals and particularly in wheat is receiving increasing attention due to recognition of its important role in food and nonfood applications. The amylose/ amylopectin ratio influences the physicochemical properties of starches and nutritional value of derived end products. Identification of the key enzymes involved in the starch biosynthetic pathway has opened new avenues for altering the amylose and amylopectin content in durum and bread wheat. The granule bound starch synthases (GBSSI), or waxy proteins, are the enzymes responsible for amylose synthesis in storage tissues; amylopectin is produced by the concerted action of different enzymes, including starch synthases (SS), branching (SBE), and debranching enzymes (DBE). By altering the level of key enzymes involved in the regulation of starch synthesis, it is possible to generate novel starches with unique functional properties. In this respect, both low and high amylose starches are particularly interesting because they are associated with industrial and processing properties as well as with human health and nutrition. So far, major attention has addressed the manipulation of starch composition in bread wheat, whereas durum wheat has been investigated to a much lesser extent. Approaches currently available to alter amylose/amylopectin ratio and tailor starch composition in durum wheat are presented.     

Fine structures and physicochemical properties of starches from chalky and translucent rice kernels

This work compared the molecular structures and physicochemical properties of starches obtained from chalky and translucent kernels of six rice cultivars. Starch samples were prepared according to a modified alkali steeping method. Crystallinity, pasting characteristics, and thermal properties were studied by X-ray diffraction, rapid viscosity analysis, and differential scanning calorimetry, respectively. Starch molecular size fractions (amylopectin, amylose, and intermediate material) were estimated by high-performance size exclusion chromatography, and the chain length profiles of isoamylase-debranched amylopectin were evaluated by high-performance anion-exchange chromatography with pulsed amperometric detection. Starches from chalky kernels contained less amylose (more amylopectin) and more short branch-chain amylopectin (less long branch-chain amylopectin) compared with the translucent kernel starches. Differences in starch structural features significantly correlated with observed variation in grain translucency, starch X-ray diffraction patterns, thermal properties, and pasting characteristics. Starch synthesis in chalky kernels may slightly favor glucan chain branching over chain elongation.