Tillage erosion within potato production in Atlantic Canada: II: Erosivity of primary and secondary tillage operations

To date, tillage erosion experiments in Canada have only been conducted on conventionally tilled corn-based production systems in Ontario and conventionally tilled cereal-based production in Manitoba. Estimates and assumptions have been made for all other production systems. Therefore, the objective of this study was to evaluate the erosivity of primary and secondary tillage operations within conventional and conservation potato production systems used in Atlantic Canada. Regression analysis determined that a direct relationship exists between slope gradient and both the mean displacement distance of the tilled layer (T_L) and the mass of translocated soil (T_M) for the chisel plough (CP), mouldboard plough (MP) and offset disc (OD), but not for the vibrashank (VS). Overall, the potential for tillage erosion of the MP, CP, and OD was similar (1.8–1.9 kg m⁻¹ %⁻¹ pass⁻¹) and larger than that of the VS (0.3 kg m⁻¹ %⁻¹ pass⁻¹). The regression coefficients for each implement were improved after including slope curvature, and we recommend that curvature be included in any future tillage erosion modelling. Our results show that both residue management to control wind and water erosion and soil movement to control tillage erosion must be considered when choosing implements and developing best management practices with regards to reducing the negative impacts of total soil erosion on potato production systems in Atlantic Canada.     

Carbon and nitrogen distribution in water-stable aggregates under two tillage techniques in Fluvisols of Owerri area, southeastern Nigeria

Organic matter influences soil structure and compactibility by binding soil mineral particles, reducing aggregate wettability, and influencing the mechanical strength of soil aggregates, which is the measure of coherence of inter-particle bonds. This work was carried out to examine how differences in water-stable aggregates influence the distribution of soil organic carbon and soil organic nitrogen under two tillage techniques [minimum tillage (only planting holes were opened) and conventional tillage (raised beds, 30 cm high, prepared manually with traditional hoes)] in soils of a Fluvisol in Owerri, southeastern Nigeria. Three pedons were dug and studied for each of the tillage technique along a soil sequence. Soil organic carbon and soil organic nitrogen distribution in whole soil and in water-stable aggregates under minimum tillage and conventional tillage were determined for the soils. Soil organic carbon contents in water-stable aggregates (WSA) of the pedons varied according to method of tillage. The highest mean values of soil organic carbon were obtained from minimum tillage and in water-stable aggregates 4.75–2.00 mm (16.03 Mg C ha⁻¹), 1.00–0.50 mm (14.06 Mg C ha⁻¹) and water-stable aggregates 2.00–1.00 mm (13.99 Mg C ha⁻¹) whereas under conventional tillage, water-stable aggregates 1.00–0.50 mm with soil organic carbon of 24.6 Mg C ha⁻¹ had the highest soil organic carbon content. Soil organic carbon correlated significantly with mean weight diameter (r = 0.48; P = 0.05; n = 15), water-stable aggregates 4.75–2.00 mm (r = 0.73; P = 0.05; n = 15), water-stable aggregates 2.00–1.00 mm (r = 0.55; P = 0.05, n = 15), water-stable aggregates 1.00–0.50 mm (r = 0.44; P = 0.05; n = 15) whereas no relationship was found between soil organic carbon and water-stable aggregates 0.50–0.25 mm (r = 0.15; P = 0.05; n = 15) and water-stable aggregates <0.25 mm (r = 0.17; P = 0.05; n = 15) in soils under minimum tillage. There was a significant correlation (r = 0.45–0.58; P = 0.05; n = 14) between all water-stable aggregates classes studied and soil organic carbon in soils under conventional tillage. Mean values of soil organic nitrogen were higher in soils under minimum tillage with 4.75–2.00 mm and 2.00–1.00 mm aggregate classes having 1.64 Mg N ha⁻¹ and 1.57 Mg N ha⁻¹ soil organic nitrogen when compared to 1.01 Mg N ha⁻¹ and 1.00 Mg N ha⁻¹ in conventionally tilled soils of the same aggregate classes, respectively. Larger water-stable aggregate classes (4.75–2.00; 2.00–1.00) had slightly more soil organic nitrogen (22–26%) than smaller aggregate classes (1.00–0.50; 0.50–0.25; >0.25) with 14–24% soil organic nitrogen in minimum tilled soils. In soils under conventional tillage, 1.00–0.50 mm, 0.50–0.25 mm and <0.25 mm aggregate classes contributed more soil organic nitrogen (19.66–22.40%) to the soil whereas larger water-stable aggregate classes contributed 19.22% soil organic nitrogen. The proportion of soil organic carbon and total nitrogen retained in soils with higher percentage of water-stable aggregates are less likely to be lost through soil and wind erosion. The higher values of SOC in the whole soil and WSA classes less than 2.00 mm are indications of positive influence of SOC on the stability of these peds.     

Interactive effect of tillage depth and mulch on soil temperature, productivity and water use pattern of rainfed barley (Hordium vulgare L.)

Soil porosity and organic matter content influence the hydrology, thermal status and productivity of agricultural soils. Shape, size and continuity of soil pores are determined by tillage practices. Thus appropriate tillage and mulch management can conserve residual soil moisture during the post rainy season. This can play a key role in enhancing productivity under the rainfed ecosystem of subhumid region in eastern India. A field study was carried out on a fine loamy soil from 1993–1994 to 1995–1996. Two tillage treatments were conventional ploughing (150 mm depth) and shallow ploughing (90 mm) depth. Each tillage practice was tested with three mulch management viz., no mulch, soil dust mulch and rice (Oryza sativa L.) straw mulch. Soil organic carbon, bulk density, moisture retentivity, soil temperature with productivity and water use pattern of barley (Hordium vulgare L.) were measured.Reduction in ploughing depth resulted in nominal increase in profile (0.0–1.2 m) moisture status, yield, and soil thermal status at 14:00 and water use efficiency (WUE). However, it decreased the magnitude of soil temperature in the morning (07:00). Straw mulch conserved 19–21 mm of moisture in the profile (1.2 m) over the unmulched condition. Both soil dust and rice straw mulching elevated soil thermal status at 07:00 as compared to unmulched condition, but this trend was reversed at 14:00. Straw mulching significantly increased grain yield and WUE over soil dust mulch and unmulched condition. Impact of straw mulch was more pronounced under shallow ploughing depth. Shallow tillage with rice straw mulching is recommended to the farmers to obtain higher level of yield and water use efficiency.     

Soil physical responses to cattle grazing cover crops under conventional and no tillage in the Southern Piedmont USA

Grazing of cover crops in grain cropping systems can increase economic return and diversify agricultural production systems, but the environmental consequences of this intensified management have not been well documented, especially under different tillage systems. We conducted a multiple-year investigation of how cover crop management (grazed and ungrazed) and tillage system [conventional (CT; initial moldboard plowing and thereafter disk tillage) and no tillage (NT)] affected soil physical properties (bulk density, aggregation, infiltration, and penetration resistance) on a Typic Kanhapludult in Georgia. Responses were determined in two cropping systems: summer grain/winter cover crop and winter grain/summer cover crop. Soil bulk density was reduced (P = 0.02) with CT compared with NT to a depth of 30 cm at the end of 0.5 year, but only to a depth of 12 cm at the end of 2, 2.5, and 4.5 years. Grazing of cover crops had little effect on soil bulk density, except eventually with 4.5 years of management. Water-stable macroaggregation was reduced (P ≤ 0.01) with CT compared with NT to a depth of 12 cm at all sampling times during the first 2.5 years of evaluation. Stability of macroaggregates in water was unaffected by grazing of cover crops in both tillage systems. Across 7 sampling events during the first 4 years, there was a tendency (P = 0.07) for water infiltration rate to be lower with grazing of cover crops (5.6 mm min⁻¹) than when ungrazed (6.9 mm min⁻¹), irrespective of tillage system. Across 10 sampling events, soil penetration resistance was greater under NT than under CT at a depth of 0–10 cm (P = 0.001) and the difference was greater in ungrazed than in grazed systems (P = 0.06). Biannual CT operations may have alleviated any surface degradation with animal traffic, but the initially high level of soil organic matter following long-term pasture and conversion to cropland with NT may have buffered the soil from any detrimental effects of animal traffic. Overall, the introduction of cattle to consume the high-quality cover crop forage did not cause substantial damage to the soil.     

Effects of no-tillage on chemical gradients and topsoil acidification

No-tillage is an increasing way of management for agricultural soils. The objective of this study was to identify in which extent the chemical properties of a loamy soil could be affected by no-tillage under temperate conditions.Soil chemical properties were investigated on a field subjected to either conventional or no-tillage management of maize (Zea mays L.) and wheat (Triticum aestivum L.) with identical fertilization practices and no lime supply since 1970. On no-tilled soil, maize was cropped exactly on the same line every other year, which enabled soil sampling under the row and under the interrow.Tilled soil had an homogeneous ploughed horizon, whereas soil under no-tillage exhibited strong vertical gradients of pH, exchangeable cations and organic C. No-tilled soil had 11.4% greater organic C than tilled soil, and the difference was concentrated in the upper 5 cm. The proportion of exchangeable cations was highest in the interrow of no-tilled soil and lowest in tilled soil. Tilled soil contained much lower exchangeable K than no-tilled soil, indicating a difference in retention capacity of this cation. The pH of the upper 5 cm of no-tilled soil was low, probably because of surface accumulation of organic residues. Whatever the tillage system, exchangeable Al was significantly related to pH according to the relation: Al_ex = 76441 × 10^−0.99 pH (r² = 0.96; p < 0.001). An expected complexing effect of organic matter on Al was not observed, probably hidden by the influence of pH.Since yields were not negatively affected by long-term no-tillage and organic C content was higher, no-tillage appears to be a cost-saving choice for maize and wheat production under these temperate environmental conditions, as well as a way for C sequestration.     

Use of an instrumented disc coulter for mapping soil mechanical resistance

A soil mechanical resistance sensor with a large-diameter disc coulter was developed to delineate areas of differing soil strength across agricultural fields. The instrumented disc coulter consisted of a 76.2 cm disc with two depth-measuring sensors (rotary potentiometer and ultrasonic proximity sensor) along with a global positioning system (GPS) receiver to georeference operating depth measurements. The consistency and repeatability of the system response were evaluated by making six passes across long-term tillage comparison plots with different degrees of soil disturbance, including: 20 cm plowing, 15 cm disking, 30 cm chiseling, and no-till in several combinations. At the time of testing, standard soil cone penetrometer measurements were taken. The relationship between the average cone index in the 0–30 cm soil profile (CI_0–30 cm) and the disc operating depth was evaluated. In addition, the cumulative energy density of the given depth of penetration defined as specific cone penetration energy (J m⁻² or N cm⁻¹) for each tillage plot was calculated using the cone index profiles. The average measured depth in each tillage plot was compared to the average predicted depth (d_ci) of a fixed specific cone penetration energy (P_ci). Static calibration tests on the depth sensors showed excellent linearity with coefficients of determination (R²) greater than 0.99. The results showed that, on the average, the changes in the depth measured with the rotary potentiometer were 44 and 68% of the changes in the depth measured with the ultrasonic proximity sensor while the disc coulter was passing across, or along, the tillage plots. This difference was primarily due to the sinkage of the tractor wheels. The depth measured with the ultrasonic sensor had significant correlation with both CI_0–30 cm and d_ci. This was partially due to the fact that a significantly high correlation (R² = 0.97) between the CI_0–30 cm and d_ci was observed, which was not expected and originated from the type of soil profiles present. The instrumented disc coulter is a low soil disturbance system and could be used as an inexpensive and simple sensor to obtain information about the mechanical condition of the soil for spot tillage or other management decisions.     

The influence of tillage systems on soil organic matter and soil hydrophobicity

Management practices including various tillage systems influence quantity and composition of soil organic matter (SOM). Parameters for evaluating both the SOM quantity (organic C [C_ox], total N [N_t]) and quality (microbial biomass C, hydrophobic and hydrophilic organic components) were determined in soil samples, taken from two soil depths (0–0.1 m and 0.1–0.3 m) in a field experiment in the period 2001–2007, with different tillage systems. The experiment, founded in 1995 in Prague-Ruzyně, includes conventional soil tillage (CT) plus some selected methods of conservation tillage: (a) no tillage (NT), (b) no tillage + mulch (NTM), and (c) minimum tillage with pre-crop residues incorporated (MTS). C_ox and microbial biomass C contents increased significantly with conservation tillage as compared to CT in 0–0.1 m layer, non-significant increase was found in 0.1–0.3 m layer. N_t increased non-significantly in both layers. Along with the depth of sampling, the content of the characterized parameters decreased in all variants; but the decrease in the conventionally tilled variant was, for the most part, lower than in the conservation tillage. The functional hydrophobic and hydrophilic groups of soil organic matter were identified by Fourier transform infrared (FTIR) spectroscopy, and the hydrophobic/hydrophilic group intensities ratio was calculated as the parameter of soil hydrophobicity. A higher soil hydrophobicity existed in all three conservation tillage treatments compared to CT due to the significantly higher content of hydrophobic organic components. C_ox correlated significantly with microbial biomass C, N_t, hydrophobic components, and soil hydrophobicity (R = 0.552–0.654; P < 0.05). Hydrophilic components did not correlate with other soil characteristics, with the exception of hydrophobic components. These data show that shifting from CT to the conservation tillage systems increased the content of SOM in top soil layer in relatively short time, improved the SOM quality and increased soil hydrophobicity in the condition of experiment.     

Tillage erosion within potato production systems in Atlantic Canada: I. Measurement of tillage translocation by implements used in seedbed preparation

In Canada, there is growing acceptance that tillage erosion is a serious form of soil degradation and a threat to the sustainability of agriculture across the country. To date, the potential risk for tillage erosion within potato production systems has not been investigated. The objective of this study was to generate tillage translocation values for primary and secondary tillage implements common to seedbed preparation within conventionally and conservation tilled potato production systems in Atlantic Canada. Tillage translocation was measured for each implement by labelling a plot of soil with a tracer. The tracer redistribution along the path of tillage was used to generate a summation curve to calculate mean soil movement in the direction of tillage. The results show that each primary and secondary tillage operation moved vast quantities of soil and is potentially erosive. Maximum displacement distances were considerably larger in this project than those reported in previous studies looking at tillage erosion by primary and/or secondary tillage implements. All four tillage implements tested moved soil at least 3 m, with the greatest translocated distances (5.6 m) observed for the chisel plough (CP) and vibrashank (VS). The mass of translocated soil (T_M) was greatest for the CP, followed by the mouldboard plough (MP), VS and offset disc (OD). In addition, compared to travelling downslope, the upslope speed of tillage was reduced by 38%, 21%, 32% and 12% for the MP, CP, OD and VS, respectively, while the depth of tillage was reduced by 6%, 5%, 35% and 2%, respectively. It is apparent that conservation tillage implements (the CP is generally promoted to reduce water erosion in Atlantic Canada) and secondary tillage implements (OD and VS) can move as much soil as conventional tillage implements such as the mouldboard plough, and must be considered when developing plans to reduce soil erosion within potato fields in Atlantic Canada.     

Characterization of soil profiles in a landscape affected by long-term tillage

Soil movement by tillage redistributes soil within the profile and throughout the landscape, resulting in soil removal from convex slope positions and soil accumulation in concave slope positions. Previous investigations of the spatial variability in surface soil properties and crop yield in a glacial till landscape in west central Minnesota indicated that wheat (Triticum aestivum) yields were decreased in upper hillslope positions affected by high soil erosion loss. In the present study, soil cores were collected and characterized to indicate the effects of long-term intensive tillage on soil properties as a function of depth and tillage erosion. This study provides quantitative measures of the chemical and physical properties of soil profiles in a landscape subject to prolonged tillage erosion, and compares the properties of soil profiles in areas of differing rates of tillage erosion and an uncultivated hillslope. These comparisons emphasize the influence of soil translocation within the landscape by tillage on soil profile characteristics. Soil profiles in areas subject to soil loss by tillage erosion >20 Mg ha⁻¹ year⁻¹ were characterized by truncated profiles, a shallow depth to the C horizon (mean upper boundary 75 cm from the soil surface), a calcic subsoil and a tilled layer containing 19 g kg⁻¹ of inorganic carbon. In contrast, profiles in areas of soil accumulation by tillage >10 Mg ha⁻¹ year⁻¹ exhibited thick sola with low inorganic carbon content (mean 3 g kg⁻¹) and a large depth to the C horizon (usually >1.5 m below the soil surface). When compared to areas of soil accumulation, organic carbon, total nitrogen and Olsen-extractable phosphorus contents measured lower, whereas inorganic carbon content, pH and soil strength measured higher throughout the profile in eroded landscape positions because of the reduced soil organic matter content and the influence of calcic subsoil material. The mean surface soil organic carbon and total nitrogen contents in cultivated areas (regardless of erosion status) were less than half that measured in an uncultivated area, indicating that intensive tillage and cropping has significantly depleted the surface soil organic matter in this landscape. Prolonged intensive tillage and cropping at this site has effectively removed at least 20 cm of soil from the upper hillslope positions.     

Characterization of soil physical properties and organic matter under long-term primary tillage in a humid climate

Chisel ploughing is considered to be a potential conservation tillage method to replace mouldboard ploughing for annual crops in the cool-humid climate of eastern Canada. To assess possible changes in some soil physical and biological properties due to differences in annual primary tillage, a study was conducted for 9 years in Prince Edward Island on a Tignish loam, a well-drained Podzoluvisol, to characterize several mouldboard and chisel ploughing systems (at 25 cm), under conditions of similar crop productivity. The influence of primary tillage on the degree of soil loosening, soil permeability, and both organic matter distribution throughout the soil profile and organic matter content in soil particle size fractions was determined. At the time of tillage, chisel ploughing provided a coarser soil macrostructure than mouldboard ploughing. Mouldboard ploughing increased soil loosening at the lower depth of the tillage zone compared to chisel ploughing. These transient differences between primary tillage treatments had little effect on overall soil profile permeability and hydraulic properties of the tilled/non-tilled interface at the 15–30 cm soil depth. Although soil microbial biomass, on a volume basis, was increased by 30% at the 0–10 cm soil depth under chisel ploughing, no differences were evident between tillage systems over the total tillage depth. Mouldboard ploughing increased total orgainc carbon by 43% at the 20–30 cm soil depth, and the carbon and nitrogen in the organic matter fraction ≤ 53 μm by 18–44% at the 10–30 cm soil depth, compared to chisel ploughing.     

Tillage impacts on soil biological activity and aggregation in a Brazilian Cerrado Oxisol

Mechanized agriculture is increasing rapidly in the Cerrado region of Brazil, causing concerns about water quality, off-site impacts, and sustainability. Our objective was to determine the impact of tillage on soil biological activity and aggregate stability in an Oxisol typical to the region. Three different tillage practices common to the Cerrado region (no-till, disk harrow, and disk plow) and an area under native vegetation were examined. Five different soil enzyme activities, C- and N-mineralization, organic C, total N, and aggregate distribution were determined. Total N, acid phosphatase, arylamidase, and C- and N-mineralization were the most sensitive to changes in tillage management. For each of these analyses, the no-till system had greater concentrations or activities (18–186%) than disk plow in the 0–5 cm layer. Significant differences observed in the 0–5 cm depth did not necessarily translate into total profile differences to a depth of 30 cm. No-till had significantly greater levels of total N, and C- and N-mineralization (20–127%) than the disk harrow system. Total N ranged from 1.8 to 2.2 kg m⁻³; C- and N-mineralization (24-day incubation) ranged from 2.8 to 6.8 and 0.04 to 0.10 kg m⁻³, respectively, among tillage systems and soil depths. Enzyme activities in all treatments were more strongly correlated with total soil N than with soil organic C (SOC), contrary to the norm in temperate soils where the stronger correlation is with SOC. Mean weight diameter of water stable aggregates was related to SOC (r = 0.73) and total N (r = 0.92), indicating that soil organic matter does play a significant role in stabilizing aggregates in Oxisols. Results indicated the importance of reducing tillage as a means of increasing soil biological activity of the topsoil in the Cerrado region of Brazil. By understanding the effects of tillage on soil biological properties, management systems can be implemented that improve natural nutrient cycling processes and soil structure, resulting in increased agricultural sustainability of tropical ecosystems.     

Effect of tillage intensity on weed infestation in organic farming

Conservation tillage is not yet widely accepted by organic farmers because inversion tillage is considered to be necessary for weed control. Three long-term experiments were established with combinations of reduced and conventional plough tillage and stubble tillage to determine weed infestation levels in organic farming, i.e. herbicide application being excluded. Experiment 1 (with very low stocking density of perennial weeds) showed that in presence of primary tillage by mouldboard ploughing the number of annual weeds was nearly unaffected by the mode of stubble tillage. In experiment 2, however, with Canada thistle (Cirsium arvense) being artificially established, thistle density was significantly affected by stubble tillage and by a perennial grass–clover forage crop. Experiment 3 combined two levels of stubble tillage (skimmer plough, no stubble tillage = control) with four implements of primary tillage in the order of decreasing operation depth (deep mouldboard plough, double-layer plough, shallow mouldboard plough or chisel plough). Primary tillage by chisel plough resulted in significantly highest annual weed density compared to all other treatments. The natural C. arvense infestation in experiment 3 showed highest shoot density in the “skimmer plough/chisel plough” treatment compared to the lowest infestation in the “skimmer plough/double-layer plough” treatment. The poor capacity of the chisel plough for weed control was also reflected by the soil seed bank (5500 m⁻² C. arvense seeds for chisel plough, <300 seeds for all other primary tillage). A reduced operation depth of the mouldboard plough (“shallow mouldboard plough”) seemed to have an insufficient effect in controlling C. arvense infestation as well. Stubble tillage by the skimmer plough in addition to nearly any primary tillage operation largely reduced both annual weeds and thistle shoots. Most effective in controlling C. arvense was also a biennial grass–clover mixture as part of the crop rotation.Double-layer ploughing is a compromise between soil inversion and soil loosening/cutting and can be regarded as a step towards conservation tillage. In terms of controlling annual weeds and C. arvense, the double-layer plough was not inferior to a deep mouldboard plough and seems to be suitable for weed control in organic farming. Tilling the stubble shallowly after harvest can support weed control in organic farming remarkably, particularly in reducing C. arvense. If no noxious, perennial weeds occur and primary tillage is done by soil inversion, an omission of stubble tillage can be taken into consideration.     

Effect of tillage and fertilizer levels on wheat yield, nitrogen uptake and their correlation with carbon isotope discrimination under rainfed conditions in north-west Pakistan

Appropriate cultural practices need to be determined for enhancing crop yields with low inputs under rainfed conditions. A field experiment was conducted to study the effect of tillage practices and fertilizer levels on yield, nitrogen (N) uptake and carbon (C) isotope discrimination in wheat (Triticum aestivum L.) grown under semi-arid conditions at three sites in north-west Pakistan: NIFA, Urmar and Jalozai. Two fertilizer levels, 60 kg N ha⁻¹+30 kg P ha⁻¹ (L1) and 60 kg N ha⁻¹+60 kg P ha⁻¹ (L2), were applied to wheat grown under conventional tillage (T1) and no-tillage (T0) practices. Labeled urea having 1% ¹⁵N atom excess at 60 kg N ha⁻¹ was applied as aqueous solution in microplots within each treatment plot. A pre-sowing irrigation of 60 mm was applied and during the growing season, the crop relied entirely on rainfall (268 mm). Biomass yield, N uptake and stable C isotope composition (δ¹³C) of plants were determined at maturity. Yield of wheat was improved by tillage at two sites (Sites 1 and 2), while at the third site yield was reduced by tillage as compared with the no-tillage treatment. At Sites 1 and 2, nutrient addition (L2, 60 kg N ha⁻¹+60 kg P ha⁻¹) increased the yield of all plant parts (straw, grain and root) in contrast to Site 3 where only grain yield was increased significantly. Maximum grain yield of wheat was observed with tillage under nutrient level L2 at all sites. Generally, the tillage treatment did not affect the N content in plant parts compared with no-tillage (T0) treatment at all three sites. However, fertilizer N uptake by wheat was variable under different fertilizer levels and tillage practices. Nitrogen derived from fertilizer (Ndff) for grain at Site 2 was higher in tilled plots but was not affected by tillage practice at the other sites. The C isotope (δ¹³C) values varied from −28.96 to −26.03‰ under different treatments at the three sites. The δ¹³C values were less negative indicating more effective water use at Sites 2 and 3 compared to Site 1. The C isotope discrimination (Δ) values were positively correlated with yield of wheat straw (r=0.578^*), grain (r=0.951^**) and root (r=0.583^*). Further, the Δ in grain had significant negative relationship (r=0.912^**) with Ndff (%). The tillage practice exerted a positive effect on yield, N uptake and plant N derived from fertilizer by wheat compared to no-tillage. The positive correlation of Δ with grain, straw and root yields and negative correlation with the Ndff (%) by wheat suggest that this value (Δ) could be used to predict these parameters. However, further studies on different crops under varied environmental conditions are necessary.     

Seedbed compaction produced by traffic on four tillage regimes in the rolling Pampas of Argentina

The main function of primary tillage is to increase the soil's structural macro-porosity, but during secondary tillage operations over these freshly tilled soils, traffic causes significant soil compaction. In terms of soil conservation however, there is evidence that direct sowing is a more sustainable system, even though there is still insufficient information about the rheology of a non-tilled soil under traffic. The objective of this study was to compare the traffic intensity and soil compaction caused by four different tillage regimes currently used by Argentinean farmers (1 direct sowing with a tractor and planter weighing 127 kN and 3 conventional tillage systems with equipment weighing 55.2 kN). The work was performed in the east of the Rolling Pampa region, Buenos Aires State, Argentina at 34°25′S, 59°15′W. Variables measured were: (1) cone index in the 0–450 mm depth profile; (2) bulk density; (3) total soil porosity; and (4) rut depth. (a) Results indicated that in the depth range 0–150 mm with all tillage treatments, bulk density and cone index values generated by tractor traffic were greater than the 1.3 Mg m⁻³ and 1400 kPa respectively. Similarly in deeper layers these parameters were greater than 1.45 Mg m⁻³ and 2000 kPa respectively. Measurements revealed that traffic reduced topsoil porosity under direct sowing by an average of 7% and under conventional tillage by 7.6–14.8% confirming that both systems cause both topsoil and subsoil compaction.     

Crop yield and soil fertility response to reduced tillage under organic management

Conservation tillage (no-till and reduced tillage) brings many benefits with respect to soil fertility and energy use, but it also has drawbacks regarding the need for synthetic fertilizers and herbicides. Our objective was to adapt reduced tillage to organic farming by quantifying effects of tillage (plough versus chisel), fertilization (slurry versus manure compost) and biodynamic preparations (with versus without) on soil fertility indicators and crop yield. The experiment was initiated in 2002 on a Stagnic Eutric Cambisol (45% clay content) near Frick (Switzerland) where the average annual precipitation is 1000 mm. This report focuses on the conversion period and examines changes as tillage intensity was reduced. Soil samples were taken from the 0–10 and 10–20 cm depths and analysed for soil organic carbon (C_org), microbial biomass (C_mic), dehydrogenase activity (DHA) and earthworm density and biomass. Among the components tested, only tillage had any influence on these soil fertility indicators. C_org in the 0–10 cm soil layer increased by 7.4% (1.5 g C_org kg⁻¹ soil, p < 0.001) with reduced tillage between 2002 and 2005, but remained constant with conventional tillage. Similarly, C_mic was 28% higher and DHA 27% (p < 0.001) higher with reduced than with conventional tillage in the soil layer 0–10 cm. In the 10–20 cm layer, there were no significant differences for these soil parameters between the tillage treatments. Tillage had no significant effect on total earthworm density and biomass. The abundance of endogeic, horizontally burrowing adult earthworms was 70% higher under reduced than conventional tillage but their biomass was 53% lower with reduced tillage. Wheat (Triticum aestivum L.) and spelt (Triticum spelta L.) yield decreased by 14% (p < 0.001) and 8% (p < 0.05), respectively, with reduced tillage, but sunflower (Helianthus annuus L.) yield was slightly higher with reduced tillage. Slurry fertilization enhanced wheat yield by 5% (p < 0.001) compared to compost fertilization. Overall, C_org, C_mic, and DHA improved and yields showed only a small reduction with reduced tillage under organic management, but long-term effects such as weed competition remain unknown.     

Infiltration patterns into two soils under conventional and conservation tillage: influence of the spatial distribution of plant root structures and soil animal activity

The characteristics and properties of the soil macropore system may cause different infiltration behavior under different tillage practices. To evaluate the effect of a specific tillage system on infiltration and percolation with particular regard to the influence of crop structure and soil animal activity dye tracer irrigation experiments were conducted in a silty (Luvisol) as well as in a sandy loam soil (Podzolluvisol). The spatial distribution of water flow paths was experimentally examined at four square areas of 0.49 m², under conservation and conventional tillage. Natural rainstorms were simulated by irrigating the plots with 2.8×10⁻³ M methylene blue solutions. For both soils the root crowns of the agricultural crop, wormcasts and stained soil sections as well as macroscopic conduits were traced on plastic sheets. The investigated soil depths were 0, 5, 10 and 20 cm for the both soils. For the Luvisol, the 30, 40, 50, 80 and 120 cm depths were also studied.For the Luvisol, the conservation tillage plot revealed pronounced vertical connectivity and continuity of the macropore network (maximum depth of stained pores=120 cm), while at the conventional tillage plot, continuous macropores were observed to soil depths of 50 cm, but mainly restricted to the ploughed topsoil (0–30 cm soil depth).For the Podzolluvisol, at the conservation tillage site extensive mulch residues prevented water transport beneath 5 cm soil depth. In contrast, at the conventionally tilled site stained water reached a depth of 20 cm. For all investigated plots on both soil types, the location of the root crowns of agricultural crop and of wormcasts was not related to percolation patterns.The results suggest that conservation tillage on silty soils under agricultural landuse could induce an increased water retention capacity reducing the significance of fast runoff components.     

Soil erosion under simulated rainfall in relation to phenological stages of soybeans and tillage methods in Lages, SC, Brazil

Soil tillage may increase vulnerability to water erosion, whereas no tillage and other conservation cultivation techniques are viewed as strategies to control soil erosion. The objective of this research was to quantify runoff and soil losses by water erosion under different soil tillage systems at the Santa Catarina Highlands, southern Brazil. A field study was carried out using a rotating-boom rainfall simulator with 64 mm h⁻¹ rainfall intensity on a Typic Hapludox, between April 2003 and May 2004. Five rainfall tests were applied along successive cropstages. Surface cover was none (fallow) or soybean (Glycine max, L.). Five treatments were investigated, replicated twice. These treatments were conventional tillage on bare soil (BS) as a control treatment and the following treatments under soybean: conventional tillage (CT), no tillage over burnt crop residues on never before cultivated land (NT-B), no tillage over desiccated crop residues, also on never before cultivated land (NT-D) and traditional no tillage over desiccated crop residues on a soil tilled 4 years before this experiment (NT-PT). Water losses by surface runoff seemed to be more influenced by vegetative crop stadium than by tillage system and consequently a wide range of variation in surface runoff was found, following successive cropstages. The most efficient tillage system in reducing surface runoff and soil losses was no tillage, particularly the NT-PT treatment. Sediment losses were more influenced by tillage system than water losses. In the NT-B, NT-D and NT-PT treatments the rate of sediment losses along the crop vegetative cycle showed a tendency to increase from the first to the second cropstages and later to decrease from the third cropstage onwards. In the conventionally tilled treatment (CT) soil losses were greater than in any of the no tillage treatments (NT-D, NT-B and NT-PT) during the initial growth periods, but at the end of the vegetative period differences in sediment rates between tilled and non-tilled treatments tended to be smaller. In the BS control treatment, soil losses progressively increased following the vegetative growth season of soybean.     

Tillage and plastic mulch effects on soil properties and growth and yield of cocoyam (Colocasia esculenta) on an ultisol in southeastern Nigeria

Protected cultivation, mainly represented by plastic-film mulching, has greatly improved crop production worldwide since the 1950s. However, despite its widespread use in tropical USA, Europe and China, its use in sub-Saharan Africa is not widespread. A field experiment was conducted using cocoyam (Colocasia esculenta L. Schott) to evaluate the effects of two tillage systems (tilled and no-till) and plastic-film mulch (black and clear plastic-film mulch) on soil properties and cocoyam growth and yield in 2003 and 2004 planting seasons on a Typic paleudult in southeastern Nigeria. The experiment comprised six treatments and was laid out in the field using randomized complete block design replicated three times. Results showed that 70–80% of the corms emerged 7–8 days (21 days after planting [DAP]) earlier in both tilled and no-till plastic-film mulched plots when compared to the unmulched plots. At later stages of crop development, the plants in the tilled black plastic-film mulched plots were taller by 61–67% than those in the unmulched no-till plots, which had the lowest plant height (27–30 cm). At 98 DAP, there were no significant treatment differences in leaf area index (LAI) between tilled and no-till mulched plots with LAI of 15.5–19.8. However, LAI was reduced in both unmulched plots by 35–54% when compared to the mulched plots. On the average soil temperature was higher in plastic-film mulched plots than that under plots without mulch by about 2 °C. Results show significantly lower soil bulk density (between 1.10 and 1.26 Mg m⁻³) in both tilled clear and black plastic-film mulched plots when compared to the corresponding no-till clear or black plastic-film mulched plots (1.40–1.45 Mg m⁻³). For the two seasons studied volumetric water content (VWC) in tilled black plastic-film mulched plots were significantly higher than VWC in other mulched plots by between 10 and 38% in 2003 and between 17 and 30% in 2004. At harvest (270 DAP) the highest corm yield was obtained in tilled black plastic mulched plots (29.1 Mg ha⁻¹). This was higher (P = 0.05) than yields obtained in no-till, no mulch plots by 72%. Yields were also higher in tilled black plastic mulched plots when compared to tilled clear plastic mulched plots, no-till black plastic mulched plots and no-till clear plastic mulched plots by 29, 47 and 59%, respectively. These findings suggest that plastic mulched plots provide a better soil environment for cocoyam than unmulched plots and that tilled mulched plots especially tilled black plastic mulched plots provide superior edaphic environment for cocoyam when compared to other treatments used.     

Long-term effects of tillage on the availability of iron, copper, manganese, and zinc in a Spanish Vertisol

Organic matter accumulation and increased microbial activity under no-till can affect the dynamics of some essential micronutrients for plants. The main purpose of this work was to study the long-term effect of tillage on the availability of Fe, Mn, Cu, and Zn in a calcareous soil from Southern Spain. To this end, nutrient availability in surface soil (0–5-cm depth) subjected to a long-term tillage experiment (21 years) was evaluated via pot experiments and chemical tests involving DTPA extraction (as availability index) and sequential chemical fractionation of Mn and Fe.Soil organic matter (SOM) content and microbial activity (estimated by the β-glucosidase method) were found to be significantly higher under no-till (NT) than under conventional (CT) or minimum tillage (MT). Also, DTPA extractable Mn, Cu, and Zn, and citrate–bicarbonate extractable Mn (Mn_cb), were all higher under NT than under CT and MT, the differences being related to the increase in SOM as revealed by the correlation of Mn, Cu, and Zn extractable with DTPA and SOM (r = 0.87, P < 0.001; r = 0.8, P < 0.01, and r = 0.86, P < 0.001, respectively), and that between Mn_cb and SOM (r = 0.87, P < 0.001). However, the increased extractability resulted in no increased concentrations of these nutrients in plants. Moreover, the Mn concentration in the last expanded leaf was significantly lower with NT than with CT, which can be ascribed at least partly to an increased microbial activity under NT as revealed by the negative correlation between Mn in plants and β-glucosidase activity in soil (r = −0.71, P < 0.01). The Fe concentration in plants was not affected by soil tillage; also, it was only related to citrate–ascorbate extractable Fe (r = 0.69, P < 0.05), which exposes the contribution of poorly crystalline Fe oxides in soil to Fe nutrition in plants.