Water availability preceding long-term drought defines the tolerance of <Emphasis Type="Italic">Eucalyptus</Emphasis> to water restriction

Plantations of Eucalyptus species are expanding across South America into regions where drought conditions can reduce growth rate and result in substantial commercial loss. Understanding the mechanisms of drought tolerance in Eucalyptus is essential for the successful production in drought-regions. The main objectives of this study were to evaluate how water availability preceding a long-term drought period affects morphological, physiological and molecular traits of four Eucalyptus clones grown under field conditions. The study areas are located in north-eastern Brazil with an average rainfall of 800 and 1500 mm per year. At each rainfall regime, the following clones were evaluated: 1404 (Eucalyptus urophylla), 1407 (E. urophylla × E. camaldulensis), 1296 and 6500 (E. grandis × E. urophylla). Our results indicate that trees growing in the area with higher annual precipitation were more stressed after long-term drought, compared to those stands previously exposed to mild water-restriction period. The genetic materials showed distinct responses to drought, which allowed their separation in two groups: drought-tolerant (1404 and 1407) and drought sensitive (6500 and 1296). The former group shows some important adaptations to drought, such as decreased leaf area (avoiding excessive transpiration rates), higher antioxidant activity and carotenoid concentration (leading to lower lipid peroxidation). In conclusion, previous exposure to water deficit may provide the benefit of increased defense protection during future water deficit. From all measured variables, the leaf area, antioxidant compounds and changes in ¹³C and ¹⁸O isotope abundance reflect some of the most important morphological and physiological alterations in order to mitigate the water stress damage in drought-tolerant genotypes.     

First report of bacterial wilt caused by Ralstonia solanacearum on eucalypts in South Africa

Ralstonia solanacearum, the causal agent of bacterial wilt, has one of the widest host ranges of all phytopathogenic bacteria. This pathogen was first reported on Eucalyptus spp. in the late 1980s in Brazil. Since then, there have been reports of its occurrence on this host in Australia, China and Venezuela. Early in 1997, an 18‐month‐old clonally propagated Eucalyptus grandis × Eucalyptus camaldulensis (GC) hybrid in Zululand, KwaZulu/Natal, showed signs of wilting. The vascular tissue of infected trees was dicoloured and bacterial exudation was produced from cut surfaces. The bacterium was consistently isolated from diseased tissue, purified and identified as R. solanacearum biovar 3 race 1, using the BioLog bacterial identification system. Inoculation trials were conducted on three E. grandis × E. camaldulensis clones (GC515, GC550 and GC505). Clone GC550 displayed wilting after 3 days and all cuttings subsequently died. Clones GC515 and GC505 appeared to be less susceptible with cuttings not showing signs of disease until 7 days after inoculation. After 14 days, 90 and 80%, respectively, of cuttings of these two clones had died. This is the first report of bacterial wilt on Eucalyptus in South Africa.     

Effect of environment on the response of Eucalyptus clones to inoculation with Cryphonectria cubensis

The ascomycete Cryphonectria cubensis causes severe losses in Eucalyptus plantations in South Africa and selection programmes for disease tolerance are necessary. The aim of this study was to use two C. cubensis inoculation trials, planted at different locations to assess the disease susceptibility of the clones and the effect of the environment on disease development. These two trials consisted each of 21 Eucalyptus clones (E. grandis, E. grandis × camaldulensis and E. grandis × urophylla). All trees were inoculated with a single virulent strain of C. cubensis and lesion widths measured 6 and 12 months after inoculation. Clones differed significantly in their tolerance to C. cubensis. Further, disease severity differed depending on the geographical location of the trial. A significant clone × locality (genotype × environment) interaction was observed. Therefore, screening for disease resistance should take place only in areas where clones will be commercially grown.     

Variation in growth potential between hybrid clones of <Emphasis Type="Italic">Eucalyptus</Emphasis> trees in eastern South Africa

Growth of commercial forestry is highly dependent on the availability of fast-growing planting materials. Consequently, the efficient utilization of fast-growing plantations can greatly impact productivity. The objectives of this study were to evaluate variations in the growth potential of two clones and to estimate the average stem radial growth advantage of a fast-growing clone using data obtained from Sappi landholdings in eastern South Africa and a mixed modelling approach that permits the incorporation of covariance structure into the statistical model. During the first 2 years of growth, the stem radius of nine trees each of two clones was measured using dendrometer attached to the tree. A second-degree fractional polynomial model was chosen to show the functional relationship between stem radius and tree age. Growth of the two hybrid clones differed significantly. The Eucalyptus grandis × Eucalyptus urophylla clone grew faster than the E. grandis × camaldulensis clone, indicating better genetic potential for rapid growth and yield. This study can be considered as starting point to further compare the potential for rapid growth of several hybrid clones using the longitudinal data modelling approach.     

Genetic parameter estimates for interspecific Eucalyptus hybrids and implications for hybrid breeding strategy

The Forestry Commission of Zimbabwe initiated a hybrid breeding program of Eucalyptus grandis with E. tereticornis (G × T) and E. camaldulensis (G × C) in order to provide suitable genotypes for planting in areas that are marginal for E. grandis in terms of drought and frost. A total of seven hybrid trials were established at four sites, representative of low to medium rainfall. The female parents were from E. grandis preselected for superior volume production. No pure species were included in the trials to act as controls and allow for estimation of hybrid vigour. Survival, growth and stem straightness were assessed at 18 and 43 months from planting. Survival was generally above 80% for all hybrids across sites. G × C hybrids performed better than G × T hybrids, showing a 20% difference in mean height at 43 months. Female and male variances were generally insignificant (P > 0.05) and in some cases, the estimates were 0. This was not unexpected, as the parents for the hybrids were preselected for superior height, diameter at breast height (DBH) and volume production as pure species. Ratio of dominance to phenotypic variance ( $ \hat{d}^{2} $ ) was significant for all traits for all hybrids (P < 0.05). Trait–trait dominance correlations (r _D ) at 43 months between height and DBH were generally large and positive, above 0.6. Type-B dominance correlation (r _BD ) suggested evidence of genotype-by-environment interaction (G × E), but one high elevation site contributed most to the observed G × E. If these results are confirmed in larger mating designs with progeny established on multiple sites, it seems that the most appropriate breeding strategy for E. grandis × E. tereticornis and E. grandis × E. camaldulensis hybrids may be one that exploits both additive and dominance genetic variance, such as the reciprocal recurrent selection (RRS) scheme or RRS with forward selection.     

Optimal rotation length for carbon sequestration in <Emphasis Type="Italic">Eucalyptus</Emphasis> plantations in subtropical China

Most Eucalyptus plantations are intensively managed as short-rotation plantations and carbon (C) storage in plants and soils in stands older than 10 years is not well understood. We examined the changes in plant biomass C and soil organic C (SOC) storage across a chronosequence of E. urophylla × E. grandis forests (4-, 7-, 10-, 13-, and 21-year-old) in subtropical China. Biomass C stock significantly increased with stand age. SOC storage increased initially after afforestation, peaking in 10-year-old stands, and declined gradually. Ecosystem C pools in the five development stages were 111.76, 167.66, 234.04, 281.00, and 299.29 Mg ha^?1, respectively. Trees and soils were the dominant C pools across all stand ages with the contribution of tree biomass C storage significantly increasing and SOC storage decreasing with age. Eucalyptus plantations are still in vigorous growth phase and have great potential for C sequestration at the end of the current rotation length (within 7 years). Considering the sharp decrease of annual biomass C increment rate and the gradual loss of SOC storage in stands older than 13 years, we recommend the optimal length for one full Eucalyptus plantation cycle should be 12–15 years in subtropical China to maximize land-use value and carbon sink value.     

Seasonal variation of selected trace elements in rare endemic species <Emphasis Type="Italic">Thuriferous Juniper</Emphasis> growing in the <Emphasis Type="Italic">Aurès</Emphasis> Mountains of Algeria

We used energy dispersive X-ray fluorescence (EDXRF) to determine the seasonal variation of selected trace elements (Cr, Mn, Zn, Cu, Se and Fe) and some potential toxic elements (Cd, Pb and Br) in Juniperus thurifera subsp. africana Maire (Cupressaceae) a rare medicinal tree, growing indigenously in Aurès Mountains of Algeria. The precision of the results was assessed by analyzing the certified reference material IPE44 (WEPAL) grass leaves. Results showed J. thurifera was characterized by high Cr and Mn contents. During autumn and winter mineral concentrations were higher in general. The levels of Cr, Se and Mn were higher during autumn and winter than during spring and summer. Zn contents were higher during summer than in other seasons. Cu content did not vary by season. The potential toxic elements in J. thurifera (Pb > Cd > Br) were below the permissible limits recommended by the Joint WHO/FAO guidelines except for Pb in autumn and winter.     

Multi-species NIR calibration for estimating holocellulose in plantation timber

Feasibility of near-infrared (NIR) spectroscopy for developing multi-species model for plantation timber was explored for estimation of holocellulose in un-extracted milled wood samples. Six commonly planted species of Eucalyptus tereticornis, E. camaldulensis, E. grandis, Leucaena leucocephala, Dalbergia sissoo and Populus deltoides from a wide range of locations and varying age groups were taken for the present study. Few samples of E. hybrid between E. tereticornis and E. camaldulensis were also included in the study to make the model useful for practical application. NIR models were evaluated using partial least squares regression (PLSR-1—full cross-validation, PLSR-2—cross-validation which leaves more than one out) and by dividing the samples into calibration and prediction (test) sets and interchanging them from calibration to prediction sets. The predictive ability of the model was assessed by calculating four ratios of multivariate statistics for individual species model and combined species models. A final combined model for all the species having component range of 76.14–63.03 % and standard deviation of 2.586 % was developed in the spectral range of 7502–4246 cm^?1 wave number using 1st derivative plus multiplicative scatter correction using factor of nine by removing samples with outliers found in all the PLSR-2 evaluation steps and in most of the models. The model remained stable even when 30 % of the samples were left out with no outlier detected.     

Biomass and nutrient allocation to aboveground components in fertilized <Emphasis Type="Italic">Eucalyptus saligna</Emphasis> and <Emphasis Type="Italic">E. urograndis</Emphasis> plantations

The objective of this study was to evaluate biomass allocation and nutrient pools in aboveground biomass components in 18-month-old plantations of Eucalyptus saligna and E. urophylla × E. grandis (i.e. E. urograndis) in Brazil. The plantations were established by pulp companies in a large area comprising three soil types (Acrisols, Vertisols and Leptosols) in the grassland biome in southern Brazil, and an operational regime of planting and maintenance fertilization was used to ensure full availability of nutrients. Vertisols showed the highest availability of soil nutrients, and the P and Ca concentrations in aboveground biomass were also highest in this type of soil. The nutritional status of both species indicates great consumption of nutrients, particularly of P, K and Ca. At this early age, canopy biomass components still made the largest relative contribution, although debarked stem biomass already accounted for 41.5% and 37.4 of total aboveground biomass in E. saligna, and E. urograndis, respectively. Nutrient concentrations in biomass components were similar across species. For all macronutrients, except Ca and Mg, the concentration gradient followed the order wood < bark < branches < leaves. For all micronutrients, except Cu, the concentration gradient followed the order wood < branches ≈ bark < leaves. At the plantation stage studied, i.e. before canopy closure, the importance of the components as nutrient pools followed the order leaves > branches > wood > bark. The branches hold the majority of Ca reserves in biomass and are a very important pool of Mg, K, P and B. The bark makes a small contribution to total biomass, but stores a similar amount of Ca as leaves, being the second major pool after the branches. Comparison of the nutrients supplied by fertilization and the amounts stored in soil and aboveground indicates that the operational dose should be adjusted to each type of soil after further experimental fertilizer trials, as the supply of N and P appears to be too high, particularly for Vertisols. This is leading to the immobilization of P in biomass components that are not of importance in the biological or biochemical nutrient cycles, thus increasing the risk of larger exports of P during biomass removal.     

Early assessment of density features for 19 Eucalyptus species using X-ray microdensitometry in a perspective of potential biomass production

Eucalyptus plantations have been considered for bioenergy production and hence their biological characteristics that make them amenable to intensive short-rotation forestry. Wood density is an important parameter that directly affects fuel production. This study focuses on the early assessment of density features for 19 Eucalyptus species using X-ray microdensitometry in a perspective of potential biomass production. Average ring density, earlywood density, latewood density, latewood percentage and the heterogeneity index were studied. E. polyanthemos registered the highest mean wood density value (0.84 g cm^?3), and E. viminalis showed the lowest value (0.53 g cm^?3). An indicator for the potential wood biomass (PWB) was calculated, with E. maculata displaying the highest biomass production index (13.4 kg). Comparison of radial growth of these species showed appreciable differences. The PWB indicator points to the prospective good aptitude for short-rotation cycle for biomass production of E. maculata, E. botryoides, E. globulus, E. nitens and E. sideroxylon.     

Lesion size induced by Chrysoporthe fungal pathogens varies between Eucalyptus species and geographic locations in Zambia

Chrysoporthe canker disease is one of the serious threats facing planted Eucalyptus in southern Africa. In order to manage this disease, planting of less susceptible species of Eucalyptus has been promoted in many countries but it is not clear which species are less susceptible for Zambian environments. The purpose of this study was to test the response of different Eucalyptus species to Chrysoporthe fungal pathogens under field conditions to identify the least susceptible species to the disease. Two-year-old Eucalyptus trees (E. grandis, E. camaldulensis, E. cloeziana and E. tereticornis) growing in low- and high-rainfall locations were inoculated separately with three Chrysoporthe fungal species (C. austroafricana, C. syzygiicola and C. zambiensis) and the induced lesion size was measured six months after inoculation. Analysis of variance revealed that lesion size differed significantly between Eucalyptus species (F_3,948 = 1 978.8, p < 0.001). Lesion size on Eucalyptus species increased in the order E. camaldulensis < E. teriticornis < E. cloeziana < E. grandis. On average, trees growing in the higher-rainfall site produced significantly larger lesions than trees growing in the low-rainfall site (F_1,948 = 565, p < 0.001), suggesting that location influences disease severity. Smaller lesions on E. camaldulensis indicate lower susceptibility to Chrysoporthe canker disease, providing an opportunity to use this species in the selection and breeding for resistant Eucalyptus genotypes for plantation development in high disease-risk sites in Zambia.     

Biomass production and potential water stress increase with planting density in four highly productive clonal Eucalyptus genotypes§

The choice of planting density and tree genotype are basic decisions when establishing a forest stand. Understanding the interaction between planting density and genotype, and their relationship with biomass production and potential water stress, is crucial as forest managers are faced with a changing climate. However, few studies have investigated this relationship, especially in areas with highly productive forests. This study aimed to determine the interaction between biomass production and leaf water potential, as a surrogate of potential water stress, in different clonal Eucalyptus genotypes across a range of planting densities. Four clones (two clones of E. urophylla × E. grandis, one clone of E. urophylla, and one clone of E. grandis × E. camaldulensis) and four planting densities (ranging from 591 to 2 949 trees ha^?1) were evaluated in an experimental stand in south-eastern Brazil. Biomass production was estimated 2.5 years after planting and predawn (ψ_pd) and midday (ψ_md) leaf water potential were measured 2 and 2.5 years after planting, in February (wet season) and August (dry season) in 2014. For all clones, total stand stemwood biomass production increased and leaf water potential decreased with planting density, and their interaction was significant. Thus, wood biomass at tighter spacings was higher but exhibited lower leaf water potentials, resulting in a trade-off between productivity and potential water stress. These are preliminary findings and still need to be supported by more experimental evidence and repetitions. However, in light of the increased frequency of extreme climate events, silvicultural practices that are tailored to the potential productivity of each region and that result in low potential water stress should be considered.     

Soil microorganisms alleviate the allelopathic effect of <Emphasis Type="Italic">Eucalyptus grandis</Emphasis> × <Emphasis Type="Italic">E</Emphasis>. <Emphasis Type="Italic">urophylla</Emphasis> leachates on <Emphasis Type="Italic">Brassica chinensis</Emphasis>

Soil microbes may be critical players in determining the allelopathic potential of some plants. Low levels of plant community biodiversity in Eucalyptus plantations have been attributed to the allelopathic potential of these tree species. The role of soil microbes in the allelopathic effect of leaf leachates of the hybrid tree Eucalyptus grandis × E. urophylla, was tested in Petri dish assays with Brassica chinensis as a receiver plant. Soils were collected from either a local garden (soil A) or a Eucalyptus plantation (soil B) and half of each soil was sterilized to remove microbes. These soils were then treated with E. grandis × E. urophylla leachates for 0–72 h. Seed germination of B. chinensis was significantly inhibited in soils treated with leaf leachates relative to untreated soils. The inhibitory effect of the leaf leachates was more pronounced in sterilized soils. Total phenolic content was obvious lower in nonsterile leachate-treated soils than in sterile soils. Biomass of B. chinensis was negatively correlated with the total phenolic content in soils. Our findings suggest that soil microbes can alleviate the allelopathic potential of Eucalyptus and thereby its negative impact on plant growth.     

Soil nitrogen mineralization under a Eucalyptus plantation and a natural Acacia forest in Senegal

In-vitro and in-situ N mineralization were studied in a natural Acacia seyal stand and in a Eucalyptus camaldulensis plantation in Senegal.Mineralizable N, measured by 20 days in-vitro incubations, averaged 40–50 ppm in Acacia soil and 11–14 ppm in Eucalyptus soil, and reached 3.5 and 2.3%, respectively, of total N. The coarse light fractions (>0.2 mm) of Eucalyptus soil organic matter did not produce any mineral N; about 80% of the mineral N was supplied by the organo-mineral fraction, as against 30–50% in Acacia soil.In-situ mineralization was related to precipitation, and ranged from 18 to 40 ppm over 4 weeks during the rainy season in the Acacia stand where 7–10% of total N was mineralized each year. Under Eucalyptus, N mineralization reached only 10 ppm over 3 weeks in the beginning of the rainy season and then decreased sharply. It was assumed that this decrease was related to a depressive effect of herbaceous root growth, the possible processes of which are discussed.     

东莞市4种人工林土壤重金属含量的特征及评价

以东莞尾叶桉林、马尾松林、马占相思林和针阔混交人工林为对象,分析林地0～25cm表层土壤Cu、Zn、Pb、cd4种重金属含量,并以广东省土壤背景值为标准,采用单因子污染指数和综合污染指数评价林地土壤重金属的污染状况。结果表明,尾叶桉林和马尾松林以土壤Ph含量最高,其他两种林型以zn含量最高;4种重金属含量高低为Zn〉Pb〉Cu〉Cd,它们的单因子污染指数大小顺序为Pb〉Cu〉Zn〉Cd。4种林型土壤综合污染指数依次为马占相思林〉尾叶桉林〉马尾松林〉针阔混交林。土壤pH值与Zn、cd之间相关性显著,土壤全钾与Zn、Cd间呈极显著正相关。结合主成分分析结果可知,东莞市4种人工林土壤Cd与自然因素有关,土壤Cu主要受人为输入影响;Zn含量高于背景值,受自然与人为因素的共同影响。     

Stress-wave velocity of trees and dynamic Young’s modulus of logs of 4-year-old Eucalyptus camaldulensis trees selected for pulpwood production in Thailand

Eucalyptus camaldulensis Dehnh. is extensively planted in Thailand to produce wood chips used as raw material for pulp and paper. To promote the utilization of the wood from plantation-grown E. camaldulensis for solid lumber, stress-wave velocity of trees and dynamic Young’s modulus of logs were investigated for 4-year-old trees of eight half-sib families selected for pulpwood production on the basis of the growth characteristics in the previous tree breeding program. For the eight families, the mean stem diameter at 1.3 m above ground level and mean tree height were 7.6 cm and 11.9 m, respectively. The mean stress-wave velocity of eight families was 3.45 km/s. Dynamic Young’s modulus of logs ranged from 7.88 to 17.64 GPa, and the mean value for the eight families was 11.72 GPa. Stress-wave velocity of trees was significantly correlated with dynamic Young’s modulus of logs, suggesting that dynamic Young’s modulus of wood can be evaluated nondestructively by stress-wave velocity of trees. Significant differences in stress-wave velocity and dynamic Young’s modulus of logs were obtained among families. Thus, to promote the utilization of E. camaldulensis wood for solid lumber production, selection of trees with high Young’s modulus should be applied to trees already selected for the growth characteristics in the previous tree breeding program.     

Infestation Density of Eucalyptus Gall Wasp,Leptocybe invasa Fisher and La Salle (Hymenoptera: Eulophidae) on Five Commercially Grown Eucalyptus Species in Tanzania

This study explores infestation density of Leptocybe invasa on five commercially grown Eucalyptus species in Coastal, Plateaux, and Southern Highlands agroecological zones of Tanzania. Infestation density between agroecological zones, Eucalyptus species, age classes and tree crown parts, relationship between stand altitudes and the magnitude of infestation, damage index, species age, and abundance of L. invasa on different Eucalyptus species were examined. There were significant differences in infestation between zones and Eucalyptus species. Eucalyptus tereticornis was more affected, followed by E. camaldulensis, and E. saligna was the least while E. grandis and E. citriodora were not affected. No significant differences in damage between different crown parts were observed. Trees with age of 1–3 yr were damaged more than those of age 4–6 yr. Pest infestation increased with an increase of L. invasa abundance but decreased with an increase of altitudes. Control efforts needs to focus on controlling the spread of the pest, using silvicultural methods and planting resistant Eucalyptus species.     

Comparison of taper functions between two planted and coppiced eucalypt clonal hybrids, South Africa

In addition to regeneration through seed, certain eucalypts are able to regenerate via the production of coppice shoots following felling, which can then be selectively thinned over time and managed as a coppice stand for the commercial production of timber. Little information could be found if tree form differs between coppiced (where one or two stems had been left per stump) and planted eucalypts, or whether different volume taper models would need to be developed. To determine if this was necessary, rotation-end stem taper data was collected from an Eucalyptus grandis × E. urophylla and an E. grandis × E. camaldulensis trial to compare volume taper equations for planted versus coppiced commercially grown Eucalyptus clonal hybrids. For treatment comparisons, taper data were collected from the parent crop (1R), the replanted crop (2R), as well as from coppiced stands where either a single (Cop_Sngl) or double stem (Cop_Dbl) had been left per stump. Stem taper functions used for treatment comparisons indicated differences between clones, as well as between treatment, with the models based on single stems (1R, 2R or Cop_Sngl) being significantly different from those containing two stems (Cop_Dbl). Despite any non-significant model differences (for example between 1R, 2R and Cop_Sngl single stem crops) the percentage magnitude of any bias in utilizable volume differences when comparing the individual models (between a 6.31% over-prediction to a 3.8% under-prediction) still needs to be taken into account as these differences may have importance in terms of the volume and product prediction.     

Quambalaria eucalypti found on Eucalyptus in Indonesia

The Eucalyptus plantation industry in Indonesia has expanded rapidly during the last few decades. During routine nursery disease surveys, symptoms of a leaf and shoot blight disease were detected on Eucalyptus mother plants. Isolates were obtained from symptomatic tissues and identified using DNA sequence analyses. Phylogenetic analyses showed that the isolates were those of Quambalaria eucalypti. Pathogenicity tests were conducted with isolates of Q. eucalypti on clones of E. pellita and E. grandis × E. pellita hybrids. These resulted in symptoms similar to those observed on naturally infected plants. Eucalyptus genotypes tested showed variation in their susceptibility, highlighting the potential to select and breed for resistance and thus to manage future outbreaks of the disease. This is the first report of the pathogen in Indonesia as well as in Southeast Asia.