Effects of Heat Stress at Different Grain‐Filling Phases on the Grain Yield and Quality of Waxy Maize

Effects of heat stress (mean day/night temperatures of 35.2/16.1 and 27.4/15.6°C for heat stress and control, respectively) during different grain‐filling phases (1–10, 11–20, 21–30, 31–40, and 1–40 days after pollination [DAP]) on the grain yield and quality of waxy maize were investigated using two varieties. Heat stress decreased the number and weight of grains, thereby reducing grain yield. The effects of heat stress at an early grain development stage (before 20 DAP) were severe. Compared with the control, starch deposition was not affected by heat stress in Suyunuo5, and it was only decreased by heat stress at 1–10 DAP in Yunuo7. Protein content responses to heat stress were variety and stage dependent. Heat stress increased the iodine‐binding capacities of both varieties. Peak and breakdown viscosities were decreased by heat stress, and the effects gradually decreased with postponement of high temperature. Heat stress increased gelatinization temperature and retrogradation percentage for both varieties, and the response was stage dependent. Heat stress during the whole grain‐filling period increased the pasting and gelatinization temperatures but decreased gelatinization enthalpy. Changes in protein and starch contents as well as the proportion of long chains in amylopectin affected the pasting and thermal properties.     

Effects of Growing Environment on Properties of Starch from Five Australian Wheat Varieties

The effects of growing conditions on properties of starch from wheat grain were examined. Growing conditions affected starch and amylose content, granule size distribution, protein associated with starch granules, and starch swelling power in grains from five commercial Australian milling wheat varieties grown at multiple locations in two years in crop production systems. Soil nitrogen and meteorological conditions were major contributors to variability in grain yield and grain protein and starch contents. The volume proportion of B‐granules was positively affected by warmer temperatures before flowering but negatively correlated with high temperatures during grain filling. Genotype was the main source of variability in the proportion of B‐granules and granule dimensions, starch‐granule proteins, and starch swelling power, although there were also significant contributions to variability from the growing conditions. Seasonal effects and interactions between genotype and season and location were significant sources of variability in amylose content, proportion of short chains of amylopectin, and flour swelling power. The positive relationships between starch content and the number of clear days and atmospheric temperatures before flowering indicate that conditions that enhance accumulation of assimilates before anthesis influence the deposition of reserves in developing grain.     

Significance of Amylose Content of Wheat Starch on Processing and Textural Properties of Instant Noodles

The effect of amylose content of starch on processing and textural properties of instant noodles was determined using waxy, partial waxy, and regular wheat flours and reconstituted flours with starches of various amylose content (3.0–26.5). Optimum water absorption of instant noodle dough increased with the decrease of amylose content. Instant noodles prepared from waxy and reconstituted wheat flours with ≤12.4% amylose content exhibited thicker strands and higher free lipids content than wheat flours with ≥17.1% amylose content. Instant noodles of ≤12.4% amylose content of starch exhibited numerous bubbles on the surface and stuck together during frying. Lightness of instant noodles increased from 77.3 to 81.4 with the increase of amylose content of starch in reconstituted flours. Cooking time of instant noodles was 4.0–8.0 min in wheat flours and 6.0–12.0 min in reconstituted flours, and constantly increased with the increase in amylose content of starch. Hardness of cooked instant noodles positively correlated with amylose content of starch. Reconstituted flours with ≤12.4% amylose content of starch were higher in cohesiveness than those of wheat flours of wild‐type and partial waxy starches and reconstituted flours with ≥17.1% amylose content. Instant fried noodles prepared from double null partial waxy wheat flour exhibited shorter cooking time, softer texture, and higher fat absorption (1.2%) but similar color and appearance compared with noodles prepared from wheat flour of wild‐type starch.     

Effects of Heat Stress During Grain Filling on the Functional Properties of Flour from Fresh Waxy Maize

The effects of temperature during grain filling on the quality of fresh waxy maize grain were investigated using three varieties. Plants of the selected varieties were subjected to two temperature treatments, namely, control (mean daily air temperature, 30°C) and heat stress (35°C), after artificial pollination (1–23 days after pollination). Heat stress decreased starch content and crystallinity and increased the contents of protein and protein fractions (albumin, globulin, zein, and glutenin), but it did not affect soluble sugar content in general. The effects of heat stress on grain textural characteristics were variety dependent, except for springiness, which was similar between treatments. Pasting and thermal properties were also affected by heat stress. The results suggest that heat stress during grain filling changes the composition of flour and crystalline structure of starch, thereby decreasing viscosities and enthalpies of gelatinization as well as increasing the pasting and gelatinization temperature of fresh waxy maize.     

Size Distribution and Properties of Wheat Starch Granules in Relation to Crumb Grain Score of Pup‐Loaf Bread

Twelve hard winter wheat flours with protein contents of 11.8–13.6% (14% mb) were selected to investigate starch properties associated with the crumb grain score of experimentally baked pup‐loaf bread. The 12 flours were classified in four groups depending on the crumb grain scores, which ranged from 1 (questionable‐unsatisfactory) to 4 (satisfactory). Flours in groups 1, 2, 3, and 4 produced breads with pup‐loaf volumes of 910–1,035, 1,000–1,005, 950–1,025, and 955–1,010 cm³, respectively. Starches were isolated by a dough handwashing method and purified by washing to give 75–79% combined yield (dry flour basis) of prime (62–71%) and tailing (7–16%) starches. The prime starch was fractionated further into large A‐granules and small B‐granules by repeated sedimentation in aqueous slurry. All starches were assayed for weight percentage of B‐granules, swelling power (92.5°C), amylose content, and granular size distribution by quantitative digital image analysis. A positive linear correlation was found between the crumb grain scores and the A‐granule sizes (r = 0.65, P < 0.05), and a polynomial relationship (R² = 0.45, P < 0.05) occurred between the score and the weight percentage of B‐granule starch. The best crumb grain score was obtained when a flour had a weight percentage of B‐granules of 19.8–22.5%, shown by varietal effects.     

Investigation of Digestibility In Vitro and Physicochemical Properties of A‐ and B‐Type Starch from Soft and Hard Wheat Flour

In this study, the functional properties of A‐ and B‐type wheat starch granules from two commercial wheat flours were investigated for digestibility in vitro, chemical composition (e.g., amylose, protein, and ash content), gelatinization, retrogradation, and pasting properties. The branch chain length and chain length distribution of these A‐ and B‐type wheat starch granules were also determined using high‐performance anion exchange chromatography (HPAEC). Wheat starches with different granular sizes not only had different degrees of enzymatic hydrolysis and thermal and pasting properties, but also different molecular characteristics. Different amylose content, protein content, and branch chain length of amylopectin in A‐ and B‐type wheat starch granules could also be the major factors besides granular size for different digestibility and other functional properties of starch. The data indicate that different wheat cultivars with different proportion of A‐ and B‐type granular starch could result in different digestibility in wheat products.     

Characteristics of Noodles and Bread Prepared from Double‐Null Partial Waxy Wheat

Double‐null partial waxy wheat (Triticum aestivum L.) flours were used for isolation of starch and preparation of white salted noodles and pan bread. Starch characteristics, textural properties of cooked noodles, and staling properties of bread during storage were determined and compared with those of wheat flours with regular amylose content. Starches isolated from double‐null partial waxy wheat flours contained 15.4–18.9% amylose and exhibited higher peak viscosity than starches of single‐null partial waxy and regular wheat flours, which contained 22.7–25.8% amylose. Despite higher protein content, double‐null partial waxy wheat flours, produced softer, more cohesive and less adhesive noodles than soft white wheat flours. With incorporation of partial waxy prime starches, noodles produced from reconstituted soft white wheat flours became softer, less adhesive, and more cohesive, indicating that partial waxy starches of low amylose content are responsible for the improvement of cooked white salted noodle texture. Partial waxy wheat flours with >15.1% protein produced bread of larger loaf volume and softer bread crumb even after storage than did the hard red spring wheat flour of 15.3% protein. Regardless of whether malt was used, bread baked from double‐null partial waxy wheat flours exhibited a slower firming rate during storage than bread baked from HRS wheat flour.     

Heat Stress at Different Grain Filling Stages Affects Fresh Waxy Maize Grain Yield and Quality

The effects of heat stress (mean day/night temperatures were 29/18 and 35/18°C for control and heat stress treatments, respectively) at 1–10 or 11–20 days after pollination (DAP) on grain yield and quality of two waxy maize varieties, Suyunuo5 and Yunuo7, were studied. The decrease in grain number and fresh grain yield was more severe when heat stress was introduced early. The responses of grain weight and its components to heat stress were dependent on the variety and heat stress stage. Heat stress increased the starch granule size and volume percentage of diameter larger than 17 μm in both varieties. Crystallinity, iodine binding capacity, and pasting and gelatinization temperatures were increased in both varieties under heat stress at 11–20 DAP; however, the response to early‐stage heat stress was variety dependent. Peak viscosity and retrogradation percentage were increased by heat stress at either stage. These results suggest that heat stress decreases fresh grain yield and accelerates grain filling rate; it increases starch content, starch granule size, crystallinity, and iodine binding capacity as well as decreases the protein content in Yunuo7, thus making the grain less tender and prone to retrogradation. Warm conditions should shorten the time to harvest in fresh waxy maize production.     

Properties and Structures of Flours and Starches from Whole,Broken, and Yellowed Rice Kernels in a Model Study

The objective of this study was to compare the structure and properties of flours and starches from whole, broken, and yellowed rice kernels that were broken or discolored in the laboratory. Physicochemical properties including pasting, gelling, thermal properties, and X‐ray diffraction patterns were determined. Structure was elucidated using high‐performance size‐exclusion chromatography (HPSEC) and high‐performance anion‐exchange chromatography with pulsed amperometric detection (HPAEC‐PAD). The yellowed rice kernels contained a slightly higher protein content and produced a significantly lower starch yield than did the whole or broken rice kernels. Flour from the yellowed rice kernels had a significantly higher pasting temperature, higher Brabender viscosities, increased damaged starch content, reduced amylose content, and increased gelatinization temperature and enthalpy compared with flours from the whole or the broken rice kernels. However, all starches showed similar pasting, gelling, thermal properties, and X‐ray diffraction patterns, and no structural differences could be detected among different starches by HPSEC and HPAEC‐PAD. α‐Amylase may be responsible for the decreased amylopectin fraction, decreased apparent amylose content, and increased amounts of low molecular weight saccharides in the yellowed rice flour. The increased amount of reducing sugars from starch hydrolysis promoted the interaction between starch and protein. The alkaline‐soluble fraction during starch isolation is presumed to contribute to the difference in pasting, gelling, and thermal properties among whole, broken, and yellowed rice flours.     

Evaluation of Starch Properties of Wheats Used for Chinese Yellow-Alkaline Noodles in Japan

The objective of the present research was to assess the functional properties of the starches isolated from Australian prime hard wheat (PH) and hard red winter wheat (HRW) in the United States. These wheats are favorably used in Japan for the production of Chinese yellow-alkaline noodles (YAN). Starches isolated from PH showed higher amylose content than those of noodle wheat but lower than bread wheat. Analysis of swelling power showed that PH starch had lower values than noodle wheat starches but higher values than bread wheat starches. By contrast, HRW starch showed relatively higher amylose content and lower swelling power. There were large differences in the starch pasting properties between PH and HRW. High-performance size-exclusion chromatography studies on the components leached from the starch (80°C, 20 min) showed that PH starch had a somewhat characteristic leaching profile. Its peak ratio of high molecular weight region to low molecular weight region was greater than that of HRW starch. PH starch also characterized by having lower endothermal enthalpy (ΔH) in amylose-lipid transition. The eating quality assessment for YAN revealed that PH had more elastic texture than HRW. Additional reconstitution studies showed that these quality differences could be attributable to its starch properties.     

Effects of a Novel Barley,Himalaya 292, on Rheological and Breadmaking Properties of Wheat and Barley Doughs

A barley mutant with high‐amylose starch, Himalaya 292, combines the potential cholesterol reducing effects of barley with the gastrointestinal benefits of high‐amylose resistant starches. Himalaya 292 has alterations in the content and composition of a range of grain constituents, thus conditions for successful addition to foods need to be defined. In this study, the rheological and breadmaking properties of doughs prepared by combining wheat flours (with various gluten protein compositions) with various barley genotypes (Himalaya 292 and the control cultivars Himalaya and Torrens) have been determined. The effects of barley addition on the rheological properties of the admixtures differed. While addition of Himalaya 292 increased the strength and reduced the extensibility of admixture doughs, addition of the Himalaya and Torrens barley flours to the wheat flours reduced both strength and extensibility. The addition of Himalaya and Torrens barley flour reduced water absorption levels. However, addition of Himalaya 292 whole grain flour increased the water absorption of the admixtures significantly (P < 0.01). The baking data showed that selection of an appropriate wheat flour with a combination of strength and extensibility allows higher levels of incorporation of barley, facilitating an increased delivery per serving of constituents with positive health attributes in β‐glucan and resistant starch.     

Starch Characteristics of Waxy and Nonwaxy Tetraploid (Triticum turgidum L. var. durum) Wheats

Manufacture of pasta products is paramount for durum wheat (Triticum turgidum L. var. durum). The recent development of waxy durum wheat containing starch with essentially 100% amylopectin may provide new food processing applications and present opportunities for value‐added crop production. This investigation was conducted to determine differences in some chemical and functional properties of waxy durum starch. Starch was isolated from two waxy endosperm lines and four nonwaxy cultivars of durum wheat. One of the waxy lines (WX‐1) was a full waxy durum wheat whereas the other line (WX‐0) was heterogeneous, producing both waxy and nonwaxy seed. Effects on starch swelling, solubility, pasting, gelatinization, and retrogradation were examined. The full waxy starch had four times more swelling power than the nonwaxy durum starches at 95°C, and was also more soluble at three of the four temperatures used. Starch pasting occurred earlier and peak viscosities were greater for starches from both waxy lines than for the nonwaxy starches, but their slurries were less stable with continued stirring and heating. Greater energy was required to melt gelatinized waxy starch gels, but no differences were found in either refrigerated storage or freeze‐thaw retrogradation, as determined by differential scanning calorimetry. The results of this investigation showed some significant differences in the starch properties of the waxy durum wheat lines compared to the nonwaxy durum wheats.     

Effects of Added Minerals on Pasting of Partial Waxy Wheat Flour and Starch and on Noodle Making Properties

Mineral content, as determined and expressed by ash content, serves as an index of wheat flour quality for flour millers and food manufacturers who prefer flour of low mineral content, even though the significance of mineral content on the functional properties of wheat flour is not well understood. We explored whether minerals have any influence on the functional properties of wheat flour and product quality of white salted noodles. Ash, obtained by incinerating wheat bran, was incorporated into two hard white spring wheat flours and their starches to raise the total ash content to 1, 1.5, or 2%. Pasting properties were determined using a rapid visco analyzer (RVA). Addition of ash increased the peak viscosity of the flours in both water and buffer solution but did not affect the peak viscosity of starch. Wheat flours with added ash showed lower pasting temperature by approximately 10°C in buffer solution. Mineral extracts (15.3% ash) isolated from wheat bran, when added to increase the ash content of wheat flour and starch to 2%, increased the peak viscosity and lowered the pasting temperature of flour by 13.2–16.3% but did not affect the pasting properties of the isolated starch. The mineral premix also increased peak viscosity of wheat flour but not in starch. Added ash increased noodle thickness and lowered water retention of cooked noodles while it exhibited no significant effect on cooked noodle texture as determined using a texture analyzer.     

Characteristics of Granular Cold‐Water Gelling Starches of Cereal Grains and Legumes Prepared Using Liquid Ammonia and Ethanol

Starches of wheat, corn, smooth and wrinkled peas, and chickpeas were modified to a free‐flowing powder of granular cold‐water gelling (GCWG) starch using liquid ammonia and ethanol at 23°C and atmospheric pressure. Amylose content of starches was 26.3% in wheat, 27.1% in corn, 35.4% in chickpeas, 43.2% in smooth peas, and 79.9% in wrinkled peas. The modified starches remained in granular form with an increased number of grooves and fissures on the surface of the granules compared with native starch, while the crystallinity was mostly lost, as shown by X‐ray diffractograms and DSC endothermic enthalpies. Pasting viscosity of modified starches at 23°C was 171 BU and 305 BU in wheat and corn, respectively, and much higher in legume starches, ranging from 545 BU to 814 BU. Viscosities of modified legume starches at 23°C were at least twice as high as those of native starches determined at 92.5°C. Swelling power of modified starches at 23°C ranged from 8.7 g/g to 15.3 g/g, while swelling power of native starches heated to 92.5°C ranged from 4.8 g/g to 16.0 g/g. GCWG starches exhibited higher dextrose equivalent (DE) values of enzymatic hydrolysis, ranging from 25.2 to 27.0 compared with native starches (1.5–2.9). Modified starches from wheat, corn, smooth peas, and chickpeas formed weak gels without heat treatment and experienced no changes in gel hardness during storage, while native starch gels formed by heat treatment showed an increase in hardness by 1.1–7.5 N during 96 hr of storage at 4°C.     

Physical properties of octenyl succinic anhydride modified rice,wheat, and potato starches

The physical properties of octenyl succinic anhydride (OSA) starches prepared from rice, wheat, and potato starches were studied. Rice and wheat OSA starches had significantly higher peak viscosity (PV), hot paste viscosity (HPV), and cool paste viscosity (CPV), but potato OSA starch had only significantly higher CPV, relative to the native starch. The gel hardness was higher with lower degree of substitution (DS) but lower with higher DS OSA compared to native starch. The swelling volumes (SV) of rice and wheat OSA starches were significantly higher compared to native starch, but the SV of potato OSA starch was slightly lower at high DS. The gelatinization temperature (GT) of rice OSA starches was sharply lower at low DS; for wheat OSA starch it was slightly lower even at high DS, but potato OSA starches had higher GT than the native starch. The enthalpy of all the OSA starches decreased gradually with increased DS. This study showed that the magnitude of changes in physical properties of OSA-modified starches depends not only on their DS but also on the botanical origin of the native starches.     

Properties of Starches from Near‐Isogenic Wheat Lines with Different Wx Protein Deficiencies

To determine the effect of amylose content on the starch properties, the amylose content, pasting properties, swelling power, enzymatic digestibility, and thermal properties of partial and perfect waxy types along with their wild‐type parent were analyzed. As expected, amylose content decreases differently in response to the loss of each Wx gene, showing the least response to Wx‐A1a. Most of the characteristics, except the thermal properties of the amylose‐lipid complex in differential scanning calorimetry (DSC), differed significantly among the tested types. Furthermore, the breakdown, setback, and pasting temperatures from the Rapid Visco Analyser (RVA) and the enzymatic digestibility, swelling power, peak temperature, and enthalpy of starch gelatinization from DSC showed a correlation with the amylose content. The relationships between the peak viscosity from the RVA and the onset temperature of starch gelatinization determined by DSC with amylose content of the tested materials were not clear. Waxy starch, which has no amylose, showed a contrasting behavior in starch gelatinization compared with nonwaxy starches. Among the nonwaxy starches, lower setback, lower pasting temperature, higher enzyme digestibility, higher peak temperature, higher enthalpy of starch gelatinization, and higher swelling were generally associated with low amylose starches.     

Hot‐Water Solubilities and Water Sorptions of Resistant Starches at 25°C

Resistant starches (RS) were prepared from wheat starch and lintnerized wheat starch by autoclaving and cooling and by cross‐linking. Heat‐moisture treatment also was used on one sample to increase RS. The experimental resistant starches made from wheat starch contained 10–73% RS measured as Prosky dietary fiber, whereas two commercial resistant starches, Novelose 240 and 330, produced from high‐amylose maize starch, contained 58 and 40%, respectively. At 25°C in excess water, the experimental RS starches, except for the cross‐linked wheat starch, gained 3–6 times more water than the commercial RS starches, and at 95°C gained 2–4 times more. Cross‐linked RS4 wheat starch and Novelose 240 showed 95°C swelling powers and solubilities of 2 g/g and 1%, and 3 g/g and 2%, respectively. All starches showed similar water vapor sorption and desorption isotherms at 25°C and water activities (a_w) < 0.8. At a_w 0.84–0.97, the resistant starches made from wheat starch, except the cross‐linked wheat starch, showed ≈10% higher water sorption than the commercial resistant starches.     

Effects of Starch Amylose Content of Wheat on Textural Properties of White Salted Noodles

White salted noodles were prepared through reconstitution of fractionated flour components with blends of waxy and regular wheat starches to determine the effects of amylose content on textural properties of white salted noodles without interference of protein variation. As the proportion of waxy wheat starch increased from 0 to 52% in starch blends, there were increases in peak viscosity from 210 to 640 BU and decreases in peak temperature from 95.5 to 70.0°C. Water retention capacity of waxy wheat starches (80–81%) was much higher than that of regular wheat starch (55–62%). As the waxy wheat starch ratio increased in the starch blends, there were consistent decreases in hardness of cooked noodles prepared from reconstituted flours, no changes in springiness and increases in cohesiveness. White salted noodles produced from blends of regular and waxy wheat flours became softer as the proportion of waxy wheat flour increased, even when protein content of flour blends increased. Amylose content of starch correlated positively with hardness and negatively with cohesiveness of cooked white salted noodles. Protein content of flour blends correlated negatively with hardness of cooked noodles, which were prepared from blends of regular (10.5% protein) and waxy wheat flours (> 16.4% protein).     

Physical Properties of Poly(Lactic Acid) and Starch Composites with Various Blending Ratios

Two‐phase polymer blends of poly(lactic acid) (PLA) and corn or wheat starches at various ratios were prepared by using a laboratory‐scale twin‐screw extruder and compression molding. The blends were characterized for thermal transitions, mechanical properties, and water absorption. Starch and PLA were immiscible polymers, and the thermal behavior of PLA was not affected by starch. Crystallinity of the blends decreased in some degree as starch content increased 20–40%. Tensile strength and elongation of the blends decreased as starch content increased, but modulus increased as starch content increased up to 70%. As starch content increased to >60%, the PLA phase became discontinuous, and water absorption of the blends increased sharply. Blends made from wheat starch gave slightly better mechanical properties than those made from corn starch, and no differences in other properties were observed.     

Effects of Oat Grain Hydrothermal Treatments on Wheat-Oat Flour Dough Properties and Breadbaking Quality

Hydrothermal treatments, which are routine in oat processing, have profound effects on oat flour dough rheological properties. The influence of roasting and steam treatments of oat grain on dough mixing and breadbaking properties was investigated when hydrothermally treated oat flour was blended with wheat flour. Roasting of oat grain (105°C, 2 hr) resulted in oat flours that were highly detrimental to wheat flour dough mixing properties and breadbaking quality. Steaming (105°C, 20 min) or a combination of roasting and steaming of oat grain significantly improved the breadbaking potential of the oat flours. The addition of oat flours increased water absorption and mixing requirements of the wheat flour dough and also decreased bread loaf volume. However, at the 10% substitution level, steamed oat flours exhibited only a gluten dilution effect on bread loaf volume when wheat starch was used as a reference. Oat flour in the breadbaking system decreased the retrogradation rate of bread crumb starch. The results indicate that adequate hydrothermal treatments of oat grain are necessary for oat flour breadbaking applications. Steamed oat flours used at a 10% level retarded bread staling without adversely affecting the loaf volume.