Relationship Between Grain,Semolina, and Whole Wheat Flour Properties and the Physical and Cooking Qualities of Whole Wheat Spaghetti

Durum breeding programs need to identify raw material traits capable of predicting whole wheat spaghetti quality. Nineteen durum wheat (Triticum turgidum L. var. durum ) cultivars and 17 breeding lines were collected from 19 different environments in North Dakota and were evaluated for physical and cooking qualities of whole wheat spaghetti. Raw material traits evaluated included grain, semolina, and whole wheat flour characteristics. Similar to traditional spaghetti, grain protein content had a significant positive correlation with cooking quality of whole wheat spaghetti. Stepwise multiple regressions showed grain protein content, mixogram break time, and wet gluten were the predominant characteristics in predicting cooked firmness of whole wheat spaghetti.     

Relationship Between Solvent Retention Capacity and Protein Molecular Weight Distribution,Quality Characteristics,and Breadmaking Functionality of Hard Red Spring Wheat Flour

This research aims to investigate the relationship between the solvent retention capacity (SRC) test and quality assessment of hard red spring (HRS) wheat flour samples obtained from 10 HRS cultivars grown at six locations in North Dakota. The SRC values were significantly (P < 0.05) correlated with flour chemical components (protein, gluten, starch, and damaged starch contents, except arabinoxylan); with farinograph parameters (stability [FST], water absorption, peak time [FPT], and quality number); and with breadmaking parameters (baking water absorption [BWA], bread loaf volume [BLV], and symmetry). Differences in locations and cultivars contributed significantly to variation in quality parameters and SRC values. Suitability of SRC parameters for discriminatory analysis of HRS wheat flour is greatly influenced by molecular weight distribution (MWD) of SDS‐unextractable proteins. SRC parameters, except for sucrose SRC, showed significant (P < 0.01) and positive correlations with high‐molecular‐weight (HMW) polymeric proteins in SDS‐unextractable fractions, whereas only lactic acid SRC exhibited significant (P < 0.01) correlations with low‐molecular‐weight polymeric proteins. HMW polymeric proteins also exhibited positive associations with FPT, FST, BWA, and BLV. The discrepant variation in association of SRC parameters with respect to MWD of SDS‐unextractable proteins could improve segregation of HRS wheat flour samples for quality.     

Effects of Physicochemical Characteristics and Lipid Distribution in Algerian Durum Wheat Semolinas on the Technological Quality of Couscous

Semolinas milled from 18 Algerian durum wheat cultivars cropped over a two‐year period (1999‐2000) were used for making couscous. This study was designed to determine the impact of lipid components of durum wheat semolina on the quality of the couscous end product. Lipids were extracted from semolina by various techniques and classified as free or bound lipids, polar or apolar lipids, and glycolipids or phospholipids. An analysis of the overall results clearly revealed that the cooking quality of couscous made from different durum wheat semolinas was partially dependent on the semolina free lipid content and composition. We have shown that this is mainly a varietal characteristic (53.4%). The surface state of the couscous, i.e., caking index (r = ‐0.48) and cooking loss (r = ‐0.54), thus depends on the apolar lipid content. Polar lipids, and especially glycolipids, affect couscous texture in terms of firmness (r = 0.57 and r = 0.63, respectively). Polar bound lipids also contribute to couscous swelling (r = 0.53) and caking index (r = 0.70). Moreover, we obtained no correlation between cooked couscous quality and the semolina total lipid content (r < 0.3). We also showed that couscous characteristics were not significantly related to the semolina protein and dry gluten contents or gluten index (r < 0.3).     

Fractionation and reconstitution experiments provide insight into the role of gluten and starch interactions in pasta quality

Commercial durum wheat (Triticum durum desf.) semolina was fractionated into starch, gluten, and water extractables. Starch surface proteins and surface lipids were removed, and two starches with manipulated granule size distributions were produced to influence starch properties, affecting its interaction with other semolina components. Reconstituted spaghetti was made with untreated (control) or treated starches. The pasta made from the starting semolina material had lower cooking time and was of lower quality than the samples made from reconstituted material. This was not due to changes in gluten properties as a result of the first step of the fractionation process. For the reconstituted samples, starch interaction behavior was not changed after surface protein or surface lipid removal. Starch surface properties thus do not influence the starch interaction behavior, indicating that starch-gluten interaction in raw (uncooked) pasta is mainly due to physical inclusion. All reconstituted pasta samples also had generally the same cooking quality. It was concluded that the small changes in starch gelatinization behavior, caused by the above-mentioned starch modifications, are of little importance for pasta quality.     

Effect of Single‐Pass and Multipass Milling Systems on Whole Wheat Durum Flour and Whole Wheat Pasta Quality

Single‐pass and multipass milling systems were evaluated for the quality of whole wheat durum flour (WWF) and the subsequent whole wheat (WW) spaghetti they produced. The multipass system used a roller mill with two purifiers to produce semolina and bran/germ and shorts (bran fraction). The single‐pass system used an ultracentrifugal mill with two configurations (fine grind, 15,000 rpm with 250 μm mill screen aperture; and coarse grind, 12,000 rpm with 1,000 μm mill screen aperture) to direct grind durum wheat grain into WWF or to regrind the bran fraction, which was blended with semolina to produce a reconstituted WWF. Particle size, starch damage, and pasting properties were similar for direct finely ground WWF and multipass reconstituted durum flour/fine bran blend and for direct coarsely ground WWF and multipass reconstituted semolina/coarse bran blend. The semolina/fine bran blend had low starch damage and had desirable pasting properties for pasta cooking. WW spaghetti was better when made with WWF produced using the multipass than single‐pass milling system. Mechanical strength was greatest with spaghetti made from the semolina/fine bran or durum flour/fine bran blends. The semolina/fine bran and semolina/coarse bran blends made spaghetti with high cooked firmness and low cooking loss.     

Physicochemical Changes in Nontraditional Pasta During Cooking

Physicochemical changes in the components of nontraditional spaghetti during cooking were reflected in the quality of the cooked product. Spaghetti formulations used were semolina (100%), whole wheat flour (100%), semolina/whole wheat flour (49:51), semolina/flaxseed flour (90:10), whole wheat flour/flaxseed flour (90:10), and semolina/whole wheat flour/flaxseed flour (39:51:10). Spaghetti quality was determined as cooking loss, cooked weight, and cooked firmness. Physicochemical analyses included total starch, starch damage, pasting properties, and protein quality and quantity of the flour mixes and spaghetti cooked for 0, 2, 4, 10, and 18 min. As cooking time progressed, total starch content decreased up to 5.7% units, starch damage increased up to 11.7% units, and both pasting parameters and protein solubility decreased significantly in all six formulations. Changes in the starch damage level, total starch content, and pasting properties of spaghetti correlated significantly (P < 0.05) with the cooking loss, cooked weight, and cooked firmness values recorded for the spaghetti. High levels of glutenin polymers and low levels of the albumin and globulin fractions were associated with low cooking losses and cooked weight and with high cooked firmness, indicating the involvement of these proteins in the cooked quality of nontraditional spaghetti.     

Effects of Break‐Roll Differential on Semolina and Spaghetti Quality

Break‐roll differential provides the shearing action needed to remove bran from the endosperm. The effects of break‐roll differential on semolina and spaghetti quality were investigated using a 25‐quintal (55‐cwt/day) durum pilot‐mill system. Differentials of each break‐roll pair were adjusted to target differentials of 1.5:1, 2.5:1, and 3.5:1 by changing the velocity of the slow roll. Fast rolls were set at a velocity of 350 rpm. Bran specks, ash, and protein increased and semolina brightness (L value) and starch damage decreased with increased break‐roll differential. Semolina yellowness (b value) was greatest with 2.5:1 and least with 1.5:1 differential. Spaghetti brightness (L value) and yellowness (b value) were lower when spaghetti was made from semolina milled at 3.5:1 than from either 2.5:1 or 1.5:1 differential. Strength of dry spaghetti and spaghetti cooking loss and cooked firmness were not affected by break‐roll differential.     

Physical and Cooking Quality of Spaghetti Made from Whole Wheat Durum

The effects of cultivar on dough properties of ground whole wheat durum, and the effects of cultivar and drying temperature on the physical and cooking quality of spaghetti made from semolina and whole wheat were evaluated. Rankings of cultivars based on dough properties were similar for whole wheat and semolina. Dough made from whole wheat was weak and had poor stability. Whole wheat spaghetti had a rough reddish brown surface compared with the very smooth, translucent yellow color of spaghetti made from semolina. The reddish brown color of whole wheat spaghetti was enhanced by high‐temperature drying (70°C). Mechanical strength and cooking quality of spaghetti made from ground whole wheat or semolina varied with cultivar and with drying temperature. Compared with spaghetti made from semolina, whole wheat spaghetti had lower mechanical strength and cooked firmness and had greater cooking loss. Mechanical strength of whole wheat spaghetti was lower when dried at high temperature (70°C) than at low temperature (40°C). Conversely, the mechanical strength of spaghetti made from semolina was greater when dried at high temperature than at low temperature. Whole wheat and traditional spaghetti dried at high temperature had lower cooking losses than spaghetti dried at low temperature. When overcooked 6 min, firmness of spaghetti made from semolina or whole wheat was greater when dried at high temperature than at low temperature.     

Breadmaking Quality of Selected Durum Wheat Genotypes and Its Relationship with High Molecular Weight Glutenin Subunits Allelic Variation and Gluten Protein Polymeric Composition

Twenty‐seven durum wheat genotypes originating from different geographical areas, all expressing LMW‐2 at Glu‐B3, and five bread wheats were evaluated for flour mixing properties, dough physical characteristics, and baking performance. Gluten polymeric composition was studied using size‐exclusion HPLC of unreduced flour protein extracts. As a group, durum wheats had poorer baking quality than bread wheats in spite of higher protein and total polymer concentrations. Durum wheats exhibited weaker gluten characteristics, which could generally be attributed to a reduced proportion of SDS‐unextractable polymer, and produced less extensible doughs than did bread wheats. However, substantial variation in breadmaking quality attributes was observed among durum genotypes. Better baking performance was generally associated with greater dough extensibility and protein content, but not with gluten strength related parameters. Extensibility did not correlate with gluten strength or SEHPLC parameters. Genotypes expressing high molecular weight glutenin subunits (HMW‐GS) 6+8 exhibited better overall breadmaking quality compared with those expressing HMW‐GS 7+8 or 20. Whereas differences between genotypes expressing HMW‐GS 6+8 and those carrying HMW‐GS 7+8 could only be attributed to variations in extensibility, the generally inferior baking performance of the HMW‐GS 20 group relative to the HMW‐GS 6+8 group could be attributed to both weaker and less extensible gluten characteristics.     

New Insights Into the Role of Gluten on Durum Pasta Quality Using Reconstitution Method

The effects of varying the gluten composition at constant protein, protein content at constant composition, and glutenin‐to‐gliadin (glu/gli) ratio on durum semolina rheological properties and the quality of the spaghetti derived from these doughs was investigated using the reconstitution method. Reconstituted flours were built up from a common durum starch and water‐soluble fraction but with varying gluten types from a range of wheats at both 12 and 9% total protein. A 10‐g mixograph and microextensigraph properties were affected by the source of the gluten, which was related to glutenin composition and polymeric molecular weight distribution. Cooked pasta firmness was highly correlated to mixograph development time (MDDT). Furthermore, varying the protein content (9–20%) showed an increase in mixograph peak resistance (PR) with no effect on extensigraph Rmax. Pasta firmness increased and stickiness decreased with increasing protein content. In another experiment, the glutenin and gliadin fractions isolated from durum wheat were added to the respective base semolina to investigate the effect of varying the glu/gli ratio by 1.3–1.6 fold. Increasing the ratio increased MDDT but had no effect on PR and resistance breakdown. Variable effects were obtained for spaghetti firmness. The information obtained should prove useful to durum breeders by providing further evidence for the importance of protein to pasta quality.     

Influence of Durum Genotype on Whole Wheat and Traditional Spaghetti Qualities

This research was conducted to determine if genotypes selected for their superior traditional semolina pasta quality would also make the best whole wheat pasta. Results from 19 durum wheat cultivars and 17 breeding lines grown at 19 different environments in North Dakota showed that physical and cooking qualities varied differently for whole wheat and traditional spaghettis, respectively. Ward's clustering segregated the 36 genotypes into five groups based on whole wheat spaghetti quality. Groups 1 and 2 (21 genotypes) produced good to high‐quality whole wheat pasta that displayed high mean values for cooked firmness (4.3 and 4.1 g·cm), mechanical strength (31.3 and 31.0 g), and color (brightness, 34.92 and 34.54), respectively. Groups 4 and 5 produced poor quality whole wheat pasta that had low cooked firmness (both 3.5 g·cm) and high cooking loss (10.1 and 10.4%). Grain protein content (≥13.9%) was found with high quality of whole wheat spaghetti. Of the 36 genotypes evaluated, 21 and 3 genotypes produced good and poor qualities, respectively, of whole wheat and traditional spaghettis, and 12 other genotypes produced good traditional spaghetti but produced poor quality whole wheat spaghetti. These data indicate the need to select genotypes specifically for their whole wheat pasta quality.     

Protein and Starch Properties of Some Tetraploid Wheats

The tetraploid relatives (subspecies) of commercial durum wheat (Triticum turgidum L. subsp. turgidum conv. durum (Desf.) MacKey) offer a source of economically useful genes for the genetic improvement of durum cultivars. Thirty‐two accessions, representing five different subspecies: var. durum (13 accessions), polonicum (7), persicum (3), turanicum (5), and turgidum (4) were grown at Tamworth, Australia, in 1997 and 1999. These accessions were compared with three durum cultivars: Wollaroi and Kamilaroi (in both years) and Yallaroi (in 1998 only). In this study, the glutenin subunit composition and molecular weight distribution, together with starch properties of these accessions, were studied. A much wider range in both the glutenin subunit composition and the starch RVA paste viscosities and gelatinization profiles were found in the accessions compared with the cultivated durum wheats. Most of the accessions had lower gluten strength and the presence of poor quality LMW alleles, and low proportions of unextractable polymeric protein could explain this. For starch, RVA peak viscosity correlated strongly with cooking loss of pasta, the only significant correlation between starch properties and measured aspects of pasta quality.     

Influence of nitrogen application rate and timing on grain protein composition and gluten strength in Swedish wheat cultivars

The influence of nitrogen (N) fertilizer application rate (0 vs. 70 vs. 140 kg N ha^–1) and timing (early = at sowing vs. late = at sowing and before heading) on the amount of protein groups, amount and size distribution of mono‐ and polymeric proteins, and gluten strength was investigated in one set of wheat cultivars (Triticum aestivum L.). Due to their genetic background, the cultivars had different protein concentrations and gluten strengths. Despite this, all of them reacted similarly on rate and timing of nitrogen application. The rate of nitrogen fertilizer increased the variation in protein concentration, gluten strength, and also the variation in most of the investigated protein components. Higher nitrogen fertilizer rate increased protein concentration, decreased gluten strength, and increased the total amount of glutenins and gliadins as well as the amounts of most mono‐ and polymeric proteins. Timing of fertilizer did not influence protein concentration. The gluten strength and the relations of proteins were changed by the timing of fertilizer. Early nitrogen feritilizer applications led to higher gluten strength and a higher percentage of total unextractable polymeric protein in the total polymeric protein and large unextractable polymeric protein in the total large polymeric protein, compared to late nitrogen fertilizer applications.     

Characterization of Durum Wheat Semolina by Means of a Rapid Shear‐Based Method

A rapid shear‐based test (the GlutoPeak test, recently proposed by Brabender) was used to investigate gluten aggregation properties of durum wheat semolina and to relate them to pasta cooking behavior. Thirty semolina samples were characterized by means of the conventional approaches used for pasta‐quality prediction (protein content, gluten index, and alveographic indices). All samples were also analyzed by the GlutoPeak test, obtaining three parameters: maximum peak torque, maximum peak time, and area under the peak. The GlutoPeak indices were significantly correlated with protein content, gluten index, and W alveographic parameter. The cooking quality of pasta obtained from the 30 semolina samples was evaluated by sensory analysis in terms of stickiness, bulkiness, firmness, and overall quality. The GlutoPeak indices were significantly correlated with the sensorial parameters. In comparison with the alveographic test, which is presently the most used rheological approach for semolina characterization, GlutoPeak analysis presents some advantages represented by a smaller amount of sample (9 g), a shorter time (less than 5 min), and the possibility that untrained analysts can carry it out. In addition, following testing with larger sample numbers, the GlutoPeak test has the potential to be used instead of the gluten index as a rapid and reliable approach for medium‐quality semolina characterization.     

Tetraploid Wheat—A Resource for Genetic Improvement of Durum Wheat Quality

The tetraploid relatives (subspecies) of commercial durum wheat (Triticum turgidum L. subsp. turgidum conv. durum (Desf.) MacKey) offer a source of economically useful genes for the genetic improvement of durum cultivars. Tetraploid wheat subspecies show a wide diversity in grain protein composition and content, which are major factors determining the pasta-making quality of durum cultivars. In this study, the specific focus was the identification of accessions expressing one or more superior pasta-making traits. In all, 33 accessions were surveyed representing five different subspecies; var. durum (13 accessions), polonicum (7 accessions), persicum (3 accessions), turanicum (6 accessions), and turgidum (4 accessions). These accessions and the durum cultivars Wollaroi and Kamilaroi (in both years) and Yallaroi (in 1998 only) were grown at Tamworth, Australia in 1997 and 1998. Grain, semolina, and spaghetti cooking quality were evaluated using a range of tests. Several accessions were identified with larger grain size and protein content and higher semolina extraction. Although many of the accessions were weaker in dough strength, a few were equal to the commercial cultivars and produced pasta of comparable quality. The main disadvantage with these accessions was the low yellow color. These quality defects can be corrected by conventional breeding.     

Influence of Gluten Proteins and Drying Temperature on the Cooking Quality of Durum Wheat Pasta

It is well known that gluten plays a major role in determining cooking quality in durum wheat pasta. This work is an attempt to systematically elucidate the role of gluten quantity and nature in determining cooking quality as a function of the drying cycle used in the manufacturing process. Gluten and starch were fractionated from two durum wheat cultivars possessing good and poor gluten quality. Either of them were then added back to the original base semolina to alter its protein content and to produce two semolina series with identical protein contents. Semolinas were processed into pasta and dried following three drying programs (low, medium, and high temperature). Cooking quality was determined with sensorial, chemical, and instrumental methods. The results indicate that optimum cooking time is governed by gluten quality. The positive effect on cooking quality of increasing gluten contents and of the application of HT drying is evident in weak gluten samples, but it is not significant in the strong gluten samples.     

Association of Size‐Exclusion HPLC of Endosperm Proteins with Dough Mixing and Breadmaking Characteristics in a Recombinant Inbred Population of Hard Red Spring Wheat

Variation of polymeric proteins affects wheat end‐use quality. This research investigated associations of polymeric proteins with dough mixing strength and breadmaking characteristics in a near‐homogenous population of 139 recombinant inbred lines (RILs) derived from a cross between two hard red spring wheat breeding lines. Flours from the RILs grown at three locations were analyzed for molecular weight (MW) distribution of SDS‐extractable and unextractable proteins using size‐exclusion HPLC protocol. Correlations were calculated between mixing and breadmaking properties and HPLC absorbance data obtained a 0.01‐min retention time interval to identify protein fractions that had a significant effect on the quality traits. Very high MW polymeric proteins in the unextractable fraction had more distinct and positive associations with dough mixing strength and bread loaf volume than did other polymeric protein fractions, whereas extractable polymeric had negative influence. Consequently, the ratio of unextractable very high MW polymeric proteins to extractable polymeric proteins had greater correlations with dough mixing parameters than other HPLC absorbance area data. Covariate‐effect biplots also visually validated positive effects of unextractable very high MW polymeric proteins and negative effects of extractable polymeric proteins on mixing properties and loaf volume across three growing locations.     

Amount and Size Distribution of Monomeric and Polymeric Proteins in the Grain of Organically Produced Wheat

In the present study, we evaluated 444 organically grown wheat genotypes for the amount and size distribution of polymeric proteins by size‐exclusion HPLC. The investigated genotypes were divided into six genotype groups—selection, spelt, old cultivar, primitive, landrace, and cultivar—and these were grown in four different locations, namely, Alnarp, Bohuslän, Gotland, and Uppsala in Sweden. The results showed that the percentage of unextractable polymeric proteins in total polymeric proteins (%UPP) and percentage of large unextractable polymeric proteins in total polymeric proteins were higher in the cultivar group as compared with the rest of the investigated genotype groups. The amounts of total extractable polymeric proteins (TOTE) and total unextractable polymeric proteins were low in cultivars and selections, respectively. Spring wheat grain was found to have a significantly higher amount of all protein fractions as compared with winter wheat. The genotype Kenya was found to belong to both groups of the 20 genotypes with the highest TOTE and %UPP. Thus, the genotype Kenya might be of relevance for consumption and future breeding to improve the breadmaking quality of organically produced wheat.     

Relationship Between the Qualitative and Quantitative Compositions of Gluten Protein Types and Technological Properties of Synthetic Hexaploid Wheat Derived from Triticum durum and Aegilops tauschii

The contribution of the diploid wheat species Aegilops tauschii (Coss.) Schmall to the technological properties of bread wheat (Triticum aestivum L.) was previously studied by the investigation of synthetic hexaploids derived from tetraploid durum wheat (T. turgidum L.) and three diploid Ae. tauschii lines. The results indicated that bread volume, gluten index, SDS‐sedimentation volume, and maximum resistance of gluten were significantly influenced by the Ae. tauschii lines. To determine the relationship between technological properties and qualitative and quantitative compositions of gluten proteins, the flours of parental and synthetic lines were extracted using a modified Osborne fractionation. Gliadin and glutenin fractions were then characterized by reversed‐phase (RP) HPLC on C₈ silica gel. The HPLC patterns revealed typical differences between synthetic and parental lines. The gliadin patterns of three synthetic lines and the glutenin patterns of two synthetic lines were more similar to that of the diploid Ae. tauschii parents involved in the hybrids. In the glutenin pattern of one synthetic line, characteristics from both Ae. tauschii and the durum wheat parents were observed. The amount of total gliadin and gliadin types of the synthetic lines was mostly intermediate between those of the durum and Ae. tauschii parents. The amounts of total glutenin and glutenin types (HMW and LMW subunits) of the synthetic lines were generally higher than those of the parental lines, and the ratio of gliadins to glutenins was significantly decreased. High positive correlations were found between the amount of total glutenins, HMW, and LMW subunits and bread volume, maximum resistance and extension area of gluten, and SDS‐sedimentation volume. The ratio of gliadins to glutenin subunits had a strong negative influence on these properties. The protein content of the flours and the amount of total gluten proteins were not correlated with any of the technological properties. Results on the relationship between biochemical characteristics and the breadmaking properties indicated that wheat prebreeding would benefit from studies on protein types and quantification in the choice of parents. In addition, the potential of the diploid Ae. tauschii for improvement of breadmaking quality should be further exploited.     

Impact of Cultivar and Environment on Size Characteristics of Wheat Proteins Using Asymmetrical Flow Field‐Flow Fractionation and Multi‐Angle Laser Light Scattering

The use of multi‐angle laser light scattering (MALLS) in conjunction with asymmetrical flow field‐flow fractionation (A‐FFFF) was investigated for the determination of the molecular weight distribution (MWD) of wheat proteins. The wheat flour proteins were dissolved by sonication in 0.1M sodium phosphate (pH 6.9) containing 2% SDS. The results presented make it evident that efficient separation and size characterization of monomeric (M < 10⁵ g/mol) and polymeric protein (10⁵ ≤ M < 10⁸ g/mol) wheat proteins can be achieved with A‐FFFF/MALLS/UV in a single run. Therefore, this method appears to be able to detect significant modifications of MWD of wheat protein, whatever the factor inducing these alterations (i.e., genetic or environmental) and whatever the nature of these alterations (i.e., monomeric‐to‐polymeric ratio or MWD of polymeric protein). In the present study, we have indeed demonstrated that the MWD of wheat proteins can be altered from one cultivar to another in three main ways: by changing the relative amounts of monomeric and polymeric proteins, by changing the MWD of polymeric protein, and then by changing both the monomeric‐to‐polymeric ratio and the MWD of polymeric protein.