<Emphasis Type="Italic">D</Emphasis><Superscript>2</Superscript> analysis for estimating genetic divergence in different clones of <Emphasis Type="Italic">Dalbergia sissoo</Emphasis>

Genetic divergence was studied in selected 36 genotypes of Dalbergia sissoo Roxb. on the basis of seven morphological parameters. The divergence among genotypes was estimated by Mahalanobis method and genotypes were grouped into clusters by Tocher’s method. All the genotypes were classified into seven distinct clusters on the basis of seven morphological traits. Cluster 1 was the largest with 25 genotypes followed by Cluster 2 (four genotypes). Cluster 3, 5, 6 and 7 were the divergent clusters. The D ² analysis revealed that D ² value (39.42) between clone 5040 and clone 201 was recorded maximum. The intra-cluster distance ranged from 0.00 (Cluster 3, 5, 6 and 7) to 3.89 (Cluster 1), the Cluster 3 (clone 33) was the most divergent cluster with maximum inter cluster distance (13.97) with the Cluster 7. By the divergence analysis, the parents for hybridization from diverse clusters could be selected for heterotic hybrids.     

Early evaluation of growth traits of <Emphasis Type="Italic">Larix kaempferi</Emphasis> clones

Early selection is an important method to shorten the breeding cycle for tree species, which may differ in the time for early selection. To evaluate the early selected time for Larix kaempferi, tree height and diameter at breast height of 57 L. kaempferi clones were measured over many different growth years. The results indicated that, except for age × clone interaction for diameter at breast height (P = 0.741), there were significant differences among all variation sources (P < 0.01). The coefficient of phenotypic variation ranged from 14.89 to 35.65% for height and from 19.17 to 23.86% for diameter at breast height in different growth years. The repeatability of height and of diameter at breast height among clones was high, ranging from 0.6181 to 0.8531 (height) and from 0.8443 to 0.8497 (diameter at breast height), in different growth years. There were significant positive correlations between all pairs of growth traits except between height in the 2nd growth year and height in the 30th growth year; and between height in the 2nd growth year × diameter at breast height in the 30th growth year. With a comprehensive evaluation method and a selection ratio of 10%, L65, L1, L62, L9, L15, and L78 were selected as excellent clones in the 30th growth year. Their average values of height and diameter at breast height were 9.81 and 16.57% higher than the overall average, representing genetic gains of 6.46 and 13.99%, respectively. This study provides a theoretical foundation for the genetic improvement of L. kaempferi.     

Feeding performance of <Emphasis Type="Italic">Clostera fulgurita</Emphasis> on three clones of <Emphasis Type="Italic">Populus deltoides</Emphasis>

Poplar leaf defoliator, Clostera fulgurita (Walker) larvae were reared on three Populus deltoides clones (PL1, PL5 and PL7) in the laboratory. The nutritional indices were computed for working out the relationship between food consumption and growth rate of 3rd, 4th and 5th instar larvae on three clones. The result showed that the consumption index (CI), approximate digestibility (AD), growth rate (GR), relative growth rate (RGR) and efficiency of conversion of ingested food (ECI) decreased with the increase in the age of the larvae. Efficiency of conversion of digested food (ECD) increased with increase in age of the larvae. GR and RGR varied significantly, indicating that larval development was enhanced on PL1 as compared to PL5 & PL7. The values of AD, ECI and ECD were not affected by the different clones. Feeding and growth indices could be useful to define a defoliation prediction model.     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Difference between sprouting traits of <Emphasis Type="Italic">Cercidiphyllum japonicum</Emphasis> and <Emphasis Type="Italic">C. magnificum</Emphasis>

Cercidiphyllum japonicum and C. magnificum are deciduous tree species that produce large numbers of sprouts. They are found mainly in riparian and/or disturbed areas. C. japonicum is distributed in the montane zone in Japan, whereas C. magnificum is distributed mostly in the subalpine zone of central Japan. However, the two species sometimes coexist, e.g., on the talus slope at the valley head of the Chichibu Mountains. We investigated differences in sprouting traits in these two species by comparing class distributions of sprout diameter at breast height (DBH) and heights of individuals on the talus slope. Sprout DBH and individual height were smaller in C. magnificum as compared to C. japonicum. Moreover, the analysis of the DBH-class distribution of each species indicated that C. magnificum had numerous small sprouts and experienced high mortality, whereas C. japonicum had fewer small sprouts and low mortality. It is likely that the sprouting traits of C. magnificum make it more adapted to severe conditions in the subalpine zone than those of C. japonicum.     

Enzymatic saccharification and ethanol production of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">Paraserianthes falcataria</Emphasis> wood,and <Emphasis Type="Italic">Elaeis guineensis</Emphasis> trunk

We examined the saccharification and fermentation of meals from Acacia mangium wood, Paraserianthes falcataria wood, and Elaeis guineensis trunk. The levels of enzymatic hydrolysis of cellulose and ethanol production were highest for P. falcataria wood and lowest for A. mangium wood. Ultrasonication pretreatment of meal further increased the rates of hydrolysis and ethanol production in meal from P. falcataria wood. Through this pretreatment, hemicelluloses (xylan and xyloglucan) and cellulose were released in the meal from P. falcataria wood. Loosening of hemicellulose associations can be expected to make P. falcataria wood more useful for bioethanol production.     

Estimation of stand attributes in <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> and <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> stands using QuickBird panchromatic data

This study aims to estimate stand density and stand volume in Cryptomeria japonica and Chamaecyparis obtusa stands from high-resolution satellite data and verify the reliability and uncertainty of the data. Sixty circular sample plots of 0.04 ha each were established. Their stand densities were estimated from the number of tree crowns derived from high-resolution satellite data using the watershed method. Stand densities derived from field surveys in the sample plots were compared with those obtained from high-resolution satellite data by stand age class. As a result, there was a positive correlation between them for sample plots of 41 years of age and over (R = 0.82); however, there was no correlation between them for sample plots of 40 years and under. Individual diameters at breast height (DBH) were estimated from crown areas obtained from high-resolution satellite data for the two species. Using the estimated DBH, individual tree heights were predicted from the height–diameter curves. Stand volumes were estimated from the sum of individual volumes, which were derived from volume formulas having two variables, i.e., DBH and height. Stand volumes derived from the field survey were compared with those obtained from high-resolution satellite data. The correlation coefficient between them for stands of 41 years of age and over was 0.78.     

Insecticidal properties of <Emphasis Type="Italic">Thymus persicus</Emphasis> essential oil against <Emphasis Type="Italic">Tribolium castaneum</Emphasis> and <Emphasis Type="Italic">Sitophilus oryzae</Emphasis>

Red flour beetle Tribolium castaneum (Herbst) and rice weevil Sitophilus oryzae (L.) are considered to be the major insect pests in storage. Essential oils from aromatic plants are recognized as proper alternatives to fumigants. Thymus persicus (Ronniger ex Rech. f.) is one of these plants that have medicinal properties and is indigenous to Iran. The essential oil was obtained from aerial parts of the plant and analyzed by GC and GC–MS. Carvacrol (44.69%) and thymol (11.05%) were the major constituents of the oil extracted. In this experiment, fumigant toxicity of the essential oil was studied against T. castaneum, S. oryzae at 27 ± 1°C and 60 ± 5% RH in dark condition. The adult insects were exposed to the concentrations of 51.9, 111.1, 207.4 and 370.4 μl/l air to estimate median lethal time (LT₅₀) values. The fumigant toxicity was increased in response to increased essential oil concentrations. The LT₅₀ values at the lowest and the highest concentrations tested were ranged from 28.09 to 13.47 h for T. castaneum, and 3.86 to 2.30 h for S. oryzae. It was found that S. oryzae adults were much more susceptible to the oil than T. castaneum. After 24 h of exposure, the LC₅₀ values (95% fiducial limit) for T. castaneum and S. oryzae were estimated to be 236.9 (186.27–292.81) and 3.34 (2.62–4.28) μl/l air, respectively. These results suggest that T. persicus essential oil merits further study as potential fumigant for the management of these stored-product insects.     

Influence of umbrella pine (<Emphasis Type="Italic">Pinus</Emphasis><Emphasis Type="Italic">pinea</Emphasis> L.) stand type and tree characteristics on cone production

Most umbrella pine (Pinus pinea L.) stands are managed as agroforestry systems, whose main production is fruit, due to the edible and highly nutritious kernels, and are frequently associated to natural or seeded pastures and grazing. The stands have low density, in order to enhance crown growth and fruit production. Nevertheless, cone production, both with regard to number and weight, varies greatly between stands, trees and years. In this study were selected three agroforestry systems, representative of umbrella pine stands whose main production is fruit, and one stand representative of the timber production system, where fruit is the secondary production. It was evaluated the variability in cone production as a function of the tree’s diameter at breast height and crown diameter and the individual tree’s competition status. The results indicate that stands managed in agroforestry systems with lower competition and individuals with larger diameter at breast height and crown diameter tend to produce more and heavier cones per tree. The first two principal components of the principal component analysis explain 84 % of the variance in cone production, trees’ dimensions and competition index. Tree competition status has a negative impact on production per tree.     

Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Assessment of genetic diversity in <Emphasis Type="Italic">Dalbergia sissoo</Emphasis> clones through RAPD profiling

We studied the genetic polymorphism among 29 clones of shisham (Dalbergia sissoo Roxb) belonging to different geographic regions using random amplified polymorphic DNA (RAPD) markers. Out of 30 primers used, only 20 primers generated polymorphism in amplified product. In total 232 bands were amplified with 20 primers, of which 192 (82%) were polymorphic with an average of 9.6 bands/primer. The resolving power (Rp) ranged from 2.14 (Primer 5) to 11.93 (Primer 4). Primer 4 and Primer 3 possessed high Rp value. Polymorphism information content (PIC) ranged from 0.15 (Primer 5) to 0.37 (Primer 4). Primer 4 amplified total 18 bands in 29 genotypes with PIC value of 0.37 hence; this set of primer was most informative. The similarity coefficient analysis revealed two clusters. The first cluster comprised of only 10 clones and the second major cluster comprised of 19 clones. The genetic similarity among 29 clones ranged from 25.86% (clone 10 and 235) to 100% (clone 19 and 59), suggesting a wide genetic base in shisham clones.     

Pathogenic effects of <Emphasis Type="Italic">Xenorhabdus nematophilus</Emphasis> and <Emphasis Type="Italic">Photorhabdus luminescens</Emphasis> (Enterobacteriaceae) against pupae of the Diamondback Moth, <Emphasis Type="Italic">Plutella xylostella</Emphasis> (L.)

The relationship between Xenorhabdus nematophilus and Photorhabdus luminescens, the bacterial symbionts of the entomopathogenic nematodes Steinernema carpocapsae and Heterorhabditis bacteriophora, against the diamondback moth, P. xylostella (L.), pupae showed the pathogenic capability of P. luminescens to be over that of X. nematophilus. They gave 60 and 40?% mortality with LC₅₀ values of 5?×?10⁴ and 5.5?×?10⁵ cells/ml, respectively.The number of bacterial cells influences the rate of killing the pupae of P. xylostella and a direct correlation between mortality of the pupae, percentage of deformed adults and the spraying dose with significant differences were observed. An inverse correlation found between the no. of eggs laid/female, percentage of hatching, adult survival and the spraying dose. These bacterial effects have been attributed to different toxic bacterial enzymes which damage the haemocytes and inhibit activation of the humoral immune system of the insect.     

Aboveground biomass equations for individual trees of <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> and <Emphasis Type="Italic">Larix kaempferi</Emphasis> in Japan

Generic equations are proposed for stem, branch and foliage biomass of individual trees in even-aged pure stands of Cryptomeria japonica, Chamaecyparis obtusa and Larix kaempferi. Biomass data was collected from a total of 1,016 individual trees from 247 stands throughout Japan, and five regression models were assessed by root mean square error, mean bias, fit index (FI), and AIC. The results show that a power equation using diameter at breast height (dbh) and height is the most suitable for all species and components. This equation is more accurate than the familiar power equation that uses ‘dbh² height’, and it expresses the greater volume of branch and foliage mass of trees with a lower height/diameter ratio. A power equation using dbh is more reasonable for models with dbh as the only independent variable and more accurate than a power equation using ‘dbh² height’ for estimating branch and foliage mass. Estimating error for branch and foliage mass is larger than that for stem mass, but the entire aboveground biomass can be estimated with an error of less than 19%, except in the case of small trees with dbh less than 10 cm.     

Spatial pattern of beech (<Emphasis Type="Italic">Fagus sylvatica</Emphasis> L.) and oak (<Emphasis Type="Italic">Quercus pubescens</Emphasis> Mill.) seedlings in natural pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.) woodlands

Spatial pattern of recruitment is an important factor influencing population dynamics of plant communities. The spatial pattern is determined by seed dispersal and by the spatial variability of germination and initial survival. In the process of forest expansion following farmland abandonment, mid- and late-successional species are often dispersed in pioneer forests by birds. This could result in an aggregated spatial pattern of seeds that could influence the dynamics of these species in mixed pioneer forests. In the sub-Mediterranean area, mid- and late-successional species such as Quercus pubescens (downy oak) and Fagus sylvatica (European beech) are expected to replace pioneer Pinus species. Using a point sampling method we demonstrated that beech and oak seedlings (height <2 m) have a clumped distribution in the understorey of pine. This could result from an aggregated dispersal by jays (dispersal effect) or from preferential recruitment in particular habitats (habitat effect). To test these hypotheses we proposed a statistical analysis of spatial patterns of regeneration of beech and oak. Ground cover variables (i.e. cover by rock outcrops, herbs, box shrubs, mosses or pine) did not differ significantly around seedlings as compared with random sample plots. Likewise, clumped seedlings had growth similar to isolated seedlings, thus refuting the hypothesis of preferential location in the most favourable microsites. Aggregated dispersal seems to be involved in the process of regeneration. Since beech and oak seedlings have contrasting ecological demands, we discuss the implication of this pattern for the replacement dynamics of pine by these species.     

Effectiveness of Neem (<Emphasis Type="Italic">Azadirachta indica</Emphasis>) insecticides against Brassica pod midge (<Emphasis Type="Italic">Dasineura brassicae</Emphasis> Winn<Emphasis Type="Italic">.</Emphasis>)

The efficiency of the botanical insecticide (BI) NeemAzal T/S (containing 1% Azadirachtin A), on the basis of azadirachtin applied in a dose of 20 g a.i. ha⁻¹ against Brassica pod midge (Dasineura brassicae), has been monitored for 4 years. The biological efficiency of BI was compared with the efficiency of some synthetic insecticides. It was ascertained that BI was very efficient in decreasing the number of damaged oilseed rape pods (ranging from 56.5 to 85.9% compared to untreated plants) and its efficiency was comparable with synthetic insecticides based on Chloronicotinyl (Thiacloprid) and Neonicotinoid (Acetamiprid). BI’s efficiency was, in some years, even significantly higher compared to pyrethroid (λ-cyhalothrin). The high biological efficiency of azadirachtin that we ascertained was significantly reflected in increasing potential crop yields. The yield increase of azadirachtin ranged between 9.3 and 19.4% compared to the control sample. Azadirachtin showed the highest yield for the whole time of experimentation, and in some years the yield increase was significantly higher compared to some synthetic agents.     

<Emphasis Type="Italic">In vitro</Emphasis> morphogenic response of leaf sheath of <Emphasis Type="Italic">Phyllostachys bambusoides</Emphasis>

Nodal segments from secondary branches of saplings of Phyllostachys bambusoides were inoculated in MS medium to assess the in vitro morphogenic response of leaf sheath through the induction to callogenesis by Picloram(4-amino-3,5,6-trichloropicolinic acid) at different concentrations of carbohydrate under the same conditions with presence or absence of luminosity.In our experiment,secondary explants were kept in MS medium containing 8.0 mg·L-1 of Picloram for the callus formation.Calluses were transferred in MS medium supplemented with sucrose,fructose and glucose(control,2%,4% and 6%).Results show that Picloram induced the callogenesis in leaf sheath.The secondary embryogenesis was formed in yellow-globular callus.The sucrose as carbohydrate source in the absence of light was more efficient to induce rhizogenesis.Glucose was more efficiency in the presence of light.Callogenic induction and further embryogenesis evidenced the competence and determination of leaf sheath cells.     

Morphological characteristics of <Emphasis Type="Italic">Quercus</Emphasis><Emphasis Type="Italic">variabilis</Emphasis> charcoal prepared at different temperatures

The morphology of charcoals was investigated by scanning electron microscopy. Charcoal of Quercus variabilis was prepared in an electric furnace under nitrogen gas atmosphere at 400, 600, 800 and 1,000°C. Charring temperature greatly affects the structure of charcoal. In charcoal prepared at 400°C, most of the morphological characteristics remained relatively unchanged with the exception of the cell-wall layering. The cell walls appeared homogenous and glass-like. Above 400°C, there was an increase in cell-wall thinning and volumetric shrinkage with an increase in the charring temperature. These two factors were responsible for most of the observed changes in structure. Fracture surfaces became increasingly rough and disrupted. Vessel elements were increasingly distorted and tyloses disintegrated with increases in temperature. Parenchyma cells exhibited greater shrinkage except at the pits. This resulted in the appearance of distinctive small protuberances over the surface of the parenchyma cells. Rhomboidal calcium crystals were found to be abundant at all the temperatures studied, but at 800 and 1,000°C the crystals had a sponge-like appearance.     

<Emphasis Type="Italic">Cinderella</Emphasis> agroforestry systems

The underlying principles and traditional knowledge concerning indigenous agroforestry systems (AFS) around the world have been used successfully in the design of improved systems; but lately there has been a slow-down in that effort. Recognizing that Cinderella, by analogy, refers to an individual whose attributes were unrecognized or one who unexpectedly achieved success after a period of obscurity and neglect, we propose Cinderella agroforestry systems for such underexploited and “forgotten” AFS. In order to highlight their unrecognized potentials, a few such systems that are location-specific and little-known outside their areas of existence were selected from around the world. Each selected system is unique in terms of its production, environmental, and sociocultural attributes; but none had been described in quantitative terms of ecology and production. A qualitative SWOT (strengths–weaknesses–opportunities–threats) analysis of the systems showed several commonalities among them. While sustainability, multi-functionality, and high sociocultural values are common strengths, low levels of production and lack of research- and technology inputs to improve the system are the major weaknesses. The opportunities emanating from strengths and weaknesses are also common to all the systems; and “threats” to these systems arise mostly from ramifications of government policies. Given the acknowledged role of AFS in climate-smart agriculture and the current global momentum for working with communities to better manage landscapes, learning from success stories of the Cinderella AFS could suggest models for sustainable development, and efforts in that direction should also be incorporated into global agroforestry research agendas.     

Modelling <Emphasis Type="Italic">Phytophthora</Emphasis> disease risk in <Emphasis Type="Italic">Austrocedrus chilensis</Emphasis> forests of Patagonia

Austrocedrus chilensis forests suffer from a disease caused by Phytophthora austrocedrae, which is found often in wet soils. We applied three widely used modelling techniques, with different data requirements, to model disease potential distribution under current environmental conditions: Mahalanobis distance, Maxent and Logistic regression. Each model was built using field data of health condition and landscape layers of environmental conditions (distance to streams, slope, aspect, elevation, mean annual precipitation and soil pH NaF). We compared model predictions by area under the receiver operating characteristic curve and Kappa statistics. A reasonable ability to predict observed disease distribution was found for each of the three modelling techniques. However, Maxent and Logistic regression presented the best predictive performance, with significant differences with respect to the Mahalanobis distance model. Our results suggested that if good absence data are available, Logistic regression should be used in order to better discriminate sites with high risk of disease. On the other hand, if absence data are not available or doubtful, Maxent could be a very good option. The three models predicted that around 50% (49–56%) of the currently asymptomatic forests are located on sites at risk of disease according to abiotic factors. Most of these asymptomatic forests surround the current diseased patches, at distances lower than 100 m from diseased patches. Management considerations and the scope of future studies were discussed in this article.     

Comparative efficacy of NeemAzal and local botanicals derived from <Emphasis Type="Italic">Azadirachta indica</Emphasis> and <Emphasis Type="Italic">Plectranthus glandulosus</Emphasis> against <Emphasis Type="Italic">Sitophilus zeamais</Emphasis> on maize

The efficacy of NeemAzal powder, two local neem (Azadirachta indica ) products [neem seed powder (NSP) and neem seed oil (NSO)], as well as a local Lamiaceae, Plectranthus glandulosus leaf powder, applied at four different rates for the control of Sitophilus zeamais was determined. Mortality was recorded 1, 3, 7 and 14 days after S. zeamais infestation, followed by the determination of F₁ progeny production. Grain damage, population increase and grain germination were assessed for treated grains that were stored for 4 months. Grains treated with P. glandulosus powder and NSP had relatively low mortality (5.0–22.5%) after 3 days whereas NeemAzal and NSO had higher mortality (55.0–98.8%). Maximum mortality of 99, 100, 96 and 74% were achieved for NeemAzal (12 g/kg after 14 days), NSO (4 ml/kg after 7 days), NSP (40 g/kg after 14 days) and P. glandulosus powder (40 g/kg, after 14 days), respectively. In the same order, 7-day LC₅₀ values were 0.02 g/kg, 1.46 ml/kg, 12.44 g/kg and 28.9 g/kg. The three neem products greatly reduced progeny emergence, while P. glandulosus powder was less effective. NeemAzal protected the grains against S. zeamais damage better than the local neem products, which in turn provided far better grain protection against the weevil damage than P. glandulosus powder. NeemAzal was superior to the local neem products in grain protection against germination loss, with P. glandulosus being the least effective. NeemAzal and NSO had sufficient efficacy to be a component of an integrated management package for S. zeamais.