Refrigerated Storage of Yellow Alkaline Durum Noodles: Impact on Color and Texture

Durum wheat straight‐grade flour samples, representing the cultivars Commander and Strongfield, a composite cargo mixture of Canada Western Amber Durum cultivars and a Japanese commercial durum flour were used to make yellow alkaline noodles. A Canada Western Red Spring common wheat composite straight‐grade flour was included in the study for comparative purposes. Alkaline noodles were prepared using 1% w/w kansui reagent (sodium and potassium carbonates, 9:1) and stored for 1, 2, 3 and 7 days at 4°C to duplicate a normal convenience store operation. The raw noodle color of the durum alkaline noodles exhibited significantly better noodle brightness, L*, and yellowness, b*, as compared to noodles prepared from common wheat at all storage periods. The number of discolored specks in the durum flour based noodles was significantly lower as well as significantly lighter than those of common wheat at all time intervals. Noodles prepared from Commander, Strongfield, or the cargo composite flours displayed significantly lower water uptake during cooking than both the commercial durum flour and the common wheat noodles. The commercial durum flour noodles displayed the thinnest cooked noodles, while the common wheat flour noodles were the thickest. Evaluation of cooked noodle texture, immediately after production and subsequent storage of the raw noodles at 4°C for 1, 2 and 3 days before cooking showed a general increase in maximum cutting stress (MCS) with storage. Noodles prepared from Commander flour consistently display MCS values exceeding those of CWRS as well as the highest resistance to compression (RTC) and recovery (REC) measurements. The visual improvements in noodle brightness, enhanced yellowness, reduced speck numbers and darkness in combination with equivalent to improved cooked noodle texture attributes compared with common wheat flour suggests that durum flours are an ideal material for fresh, refrigerated yellow alkaline noodles.     

Investigation of a Small‐Scale Asymmetric Centrifugal Mixer for the Evaluation of Asian Noodles

A high throughput centrifugal mixer capable of using smaller amounts of flour (50 g) was evaluated for the production of oriental alkaline noodles. The unit requires a small footprint on a laboratory bench and offers variable speed mixing (300–3,500 rpm) for 5–60 sec. Three different mixing bowls, plain, pin, and paddle, were evaluated for the small‐scale production of alkaline noodles using straight‐grade flour derived from Canada Western Red Spring (CWRS) and Canada Prairie White Spring (CPSW) wheat. Under optimized mixing conditions (3,000 rpm for 30 sec), the pin and paddle bowls produced noodle dough with crumb size distribution and adhesion characteristics consistent with commercial requirements. The plain bowl produced dough with larger undesirable dough chunks and showed excessive heat buildup. Noodle sheets produced from this dough were not comparable in color characteristics to conventionally produced noodle sheets. Noodles prepared using the paddle mixer also displayed some significantly different color and texture characteristics than conventionally prepared noodles. However, raw noodle sheets or cooked noodles of either wheat class, prepared using the pin bowl mixer, displayed color values (L*, a*, and b*) at 2 and 24 hr and cooked noodle texture characteristics (bite, chewiness, resistance to compression, and recovery) comparable to a conventional laboratory‐scale Hobart type mixer. In addition to the very short mixing time and small equipment footprint for the centrifuge mixer, rapid throughput is enhanced by the ability to rapidly clean or interchange bowls and to potentially vary sample size to as little as 5 g. These attributes should be particularly useful in earlier generation breeder programs where large numbers of samples require rapid screening.     

Quality Characteristics of Yellow Alkaline Noodles Enriched with Hull‐less Barley Flour

Roller milled flours from eight genotypes of hull‐less barley (HB) with normal, waxy, zero amylose waxy (ZAW), and high amylose (HA) starch were incorporated at 20 and 40% (w/w) with a 60% extraction Canada Prairie Spring White (CPSW, cv. AC Vista) wheat flour to evaluate their suitability as a blend for yellow alkaline noodles (YAN). The barley flour supplemented noodles were prepared using conventional equipment. Noodles containing 40% HB flour required less work input than the corresponding 20% blend noodles due to a higher water absorption at the elevated level of HB flour addition, which probably caused them to soften. The addition of any HB flour at either level to the CPSW flour resulted in significantly decreased brightness (L*) and yellowness (b*), elevated redness (a*), concomitant with a significantly greater number of specks per unit area of noodle sheet compared with the control flour. The addition of 40% HB flour to YAN decreased cook time and cooking losses. Noodle firmness, as determined by maximum cutting stress (MCS), was significantly increased by the addition of 40% HB flour. Noodle chewiness, as determined by the texture profile analysis (TPA), was affected by the type of starch in the barley samples; the addition of waxy and ZAW HB flour decreased chewiness, whereas normal and HA HB flour increased chewiness of composite noodles.     

Suitability of Ontario‐Grown Hard and Soft Wheat Flour Blends for Noodle Making

This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle‐making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than standard noodle flour. Below a 20% blend ratio with HWF, no significant changes were seen on dough extensibility, cooking loss, tensile properties, and bite testing parameters of cooked noodles. It can be concluded that blending HWF up to a 20% level caused no significant change in the processing properties of dough and cooked noodle quality. The results also showed that the GlutoPeak tester is a sensitive tool for evaluating gluten strength in wheat flour.     

Influence of Alkaline Formulation on Oriental Noodle Color and Texture

Patent (60% yield) and straight-grade flours of Canada Western Red Spring (CWRS) and Canada Prairie Spring White (CPSW) wheat were used to determine the influence of different ratios of alkaline salts, their concentration, and NaCl on the texture and color characteristics of the yellow alkaline noodles. Addition of 3% (w/w) salt to any formulation resulted in a significant increase in the amount of work required to process the raw noodles, while significantly lower work input was observed for noodles prepared using a 5% (w/w) 9:1 Na-to-K carbonate ratio without salt formula. Wheat class, extraction rate, and alkali formulation had a significant effect on raw noodle brightness with noodles prepared using 5% carbonate being brighter than the 1% carbonate noodles. Maximum cooked noodle thickness was achieved from all flours using a 1% 9:1 Na-to-K carbonate ratio, 3% salt formulation. The inclusion of 3% NaCl into the formula resulted in noodles significantly thicker than the corresponding salt-free formula for all flours. Cooked noodle texture parameters evaluated were maximum cutting stress (MCS), resistance to compression (RTC), recovery (REC), and stress relaxation time. In all cases, the presence of 3% salt in the various formulations resulted in a decrease in each parameter relative to the corresponding salt-free formulation. Desirable bite (MCS), chewiness (RTC, REC), and relaxation times were achieved with a 1% concentration of alkali salts, without NaCl, regardless of the Na-to-K carbonate ratio. Use of a 5% concentration of alkali salts resulted in a significant reduction in texture that was most pronounced for the 1:9 Na-to-K carbonate formulation.     

Physicochemical Properties of Australian Flours Influencing the Texture of Yellow Alkaline Noodles

Flour properties of 25 Australian wheat cultivars were examined for their relationship to alkaline noodle quality. Rapid Visco Analyzer (RVA) analyses of flours showed that RVA breakdown and final viscosity determined in both water and dilute sodium carbonate were significantly related to the alkaline noodle firmness, elasticity, and surface smoothness. Flour swelling volume (FSV) of flours was negatively correlated with alkaline noodle firmness and elasticity, and positively correlated with surface smoothness of cooked noodles. Use of a dilute sodium carbonate solution led to overall increases in both paste viscosity and FSV. High FSV and low RVA final viscosity values were associated with both the softest noodles and with cultivars containing a null allele for granule-bound starch synthase on chromosome 4A. Flour protein content and SDS sedimentation volumes were significantly related to noodle texture. The relationship between protein content and noodle firmness was dependent on the Null4A status of the flours and suggested an interaction between starch and protein in determining noodle texture. Multiple regression analysis using flour protein and FSV accounted for 76% of the variation in alkaline noodle firmness. A speculative model of noodle structure was developed based on a concept of the cooked noodle as a composite material.     

Genotypic and Environmental Modification of Asian Noodle Quality of Hard Winter Wheats

The relative effects of environment, genotype, and their interactions on the modification of Asian noodle quality attributes were assessed using 38 winter wheat (Triticum aestivum L.) cultivars and breeding lines grown in replicated trials at three Nebraska locations in harvest year 2000. Noodle color was determined in both white salted and yellow alkaline procedures, and noodle textural features were investigated by producing white salted noodles. Significant environmental, genotypic, and genotype‐by‐environment variation was observed for nearly all initial and 24‐hr noodle color traits in both types of noodles. Significant genotypic effects were observed for several textural traits, while significant environmental effects were observed only for noodle hardness and water uptake. However, among the noodle textural traits, the genotype‐by‐environment interaction was significant only for noodle firmness. High and significant phenotypic correlations were observed between color traits in the two noodle applications. Genetic correlations were of lower magnitude, indicating the possibility of breeding wheats specifically for various noodle color types. Strong negative phenotypic and genetic correlations were observed between flour protein content and noodle brightness (L*) values in both yellow alkaline and white‐salted applications. Textural traits largely were independent of noodle color traits. When significant phenotypic or genetic correlations were observed between variable pairs, invariably similar correlations were observed with flour protein content. Noodle cutting force, cutting area, and final thickness showed strong phenotypic and genetic correlations with each other and with protein content. These variables largely were independent of noodle firmness and hardness, which were, in turn, more dependent on alleles at the wheat wx‐A1 and wx‐B1 (waxy) loci. Noodle firmness was greatest in flours from wild‐type wheats; lines with a null allele only at the wx‐A1 locus did not differ from wild‐type. Softest noodles were produced from lines carrying null alleles at both wx‐A1 and wx‐B1, while lines with a null only at wx‐B1 were intermediate in softness.     

Effects of Particle Size and Starch Damage of Flour and Alkaline Reagent on Yellow Alkaline Noodle Characteristics

A hard white spring wheat was milled to yield three patent flours with different starch damage levels by manipulating reduction grinding conditions, and each flour was sieved to give three different particle sizes (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Noodles prepared with sodium hydroxide were significantly brighter, less red, and more yellow than those made with kansui. Differences in noodle color among flour treatments were evident but were attributable to differences in flour refinement rather to than particle size or starch damage. Noodles were rested for 1 hr after processing before cooking. Alkaline reagent was the main factor associated with cooking loss, being ≈50% greater for sodium hydroxide noodles because of higher pH compared with kansui noodles. Cooked sodium hydroxide noodles were thicker than kansui noodles, and cooked strands for both noodle types became thicker as starch damage increased and as particle size became coarser. Instrumental assessment of cooked noodle texture showed that maximum cutting stress (MCS), resistance to compression (RTC), recovery (REC), stress relaxation time (SRT), chewiness (CHE), and springiness (SPR) were influenced by the type of alkaline reagent. Flour particle size and starch damage also influenced noodle texture but the magnitude of the effects and the trends were dependent on alkaline reagent. MCS of kansui noodles was much greater than for sodium hydroxide noodles. MCS of kansui noodles increased as starch damage increased but, in contrast, MCS of sodium hydroxide noodles decreased with increasing starch damage. REC of kansui noodles increased with increasing starch damage and decreased with larger particle size, whereas for sodium hydroxide noodles REC decreased with increasing starch damage and declined dramatically with larger particle size. Kansui noodles exhibited significantly shorter SRT than sodium hydroxide noodles. SRT of kansui noodles was only moderately affected by starch damage and particle size, whereas for sodium hydroxide noodles, SRT became much shorter as flour became coarser and starch damage became higher. CHE of kansui noodles was greater than for sodium hydroxide noodles. CHE of kansui noodles increased as starch damage increased. In contrast, CHE of sodium hydroxide noodles decreased as starch damage increased and also decreased as flour became coarser. SPR of both noodle types decreased as flour became coarser and starch damage became greater. On the basis of these experiments, flour of smaller particle size is an asset to the cooking quality of sodium hydroxide noodles, but high starch damage is to be avoided. For kansui noodles, the impact of flour particle size on cooked noodle texture was less evident and low starch damage, rather than high starch damage, was an asset.     

Environmental Influences on Flour Quality for Sheeted Noodles in Idaho 377s Hard White Wheat

Production of common wheat (Triticum aestivum L.) in the Pacific Northwest of the United States specifically for Asian noodle products is a relatively new goal for grain producers. We surveyed commercial fields of the hard white spring wheat cultivar Idaho 377s in two years to determine the variables contributing to Asian noodle quality and to validate previous observations made with small‐plot research. Fields were surveyed in 1998 and 1999 in two areas of the Snake River Plain of southeastern Idaho separated by ≈100 km, with both irrigated fields and rain‐fed fields sampled in both zones. Samples were evaluated for grain characteristics then milled and evaluated for flour quality, alkaline noodle color, and color and texture of nonalkaline Chinese (salted, neutral pH) noodles. Grain from rain‐fed fields produced brighter and more yellow alkaline noodles than grain from irrigated fields. Grain produced in rain‐fed fields also had lower peak flour pasting viscosity than grain produced in irrigated fields. Flour ash was lowest in grain from rain‐fed fields located in a higher elevation district (Upper Valley) and greatest in grain from irrigated fields located in a lower elevation district (Lower Valley). Noodle hardness and chewiness were greater in Chinese noodles made from grain produced in the Upper Valley than grain from the Lower Valley. Chinese noodle color had significant interaction with the location and irrigation management used for producing the grain. However, Chinese noodle brightness was consistently negatively correlated with flour protein concentration. The color and texture of noodles produced from flours milled from on‐farm commercial production was consistent with previous experiment station small‐plot research.     

Quality Characteristics of Fresh and Dried White Salted Noodles Enriched with Flour from Hull‐less Barley Genotypes of Diverse Amylose Content

Fresh and dried white salted noodles (WSN) were prepared by incorporating up to 40% flour from hull‐less barley (HB) genotypes with normal amylose, waxy, zero amylose waxy (ZAW), and high amylose (HA) starch into a 60% extraction Canada Prairie Spring White (cv. AC Vista) wheat flour. The HB flours, depending on genotype, contained four to six times the concentration of β‐glucan of the wheat flour, offering potential health benefits. The HB‐enriched noodles were made with conventional equipment without difficulty. Noodles containing 40% HB flour required less work input during sheeting, probably due to higher optimum water absorption and weakening of the dough due to dilution of wheat gluten. The addition of HB flour had a negative impact on WSN color and appearance, as evident from decreased brightness, increased redness, and more visible specking. The impact of HB flour on cooked WSN texture varied by starch type. Enrichment with HA or normal starch HB flour produced WSN with bite and chewiness values equivalent to or superior to the wheat flour control. Addition of waxy and ZAW HB flour resulted in WSN with lower values for bite and chewiness. The diversity of HB starch types allows tailoring of WSN texture to satisfy specific markets. HB flour also has potential as an ingredient in novel noodle products targeting health‐conscious consumers who associate darker colored cereal‐based foods with superior nutritional composition.     

Evaluation of White Salted Noodles Enriched with Oat Flour

Oat consumption is regarded as having significant health benefits. The enrichment of white salted noodles with oat flour would provide a potential health benefit but may affect the texture and sensory quality. Oat cultivars grown in Western Australia (Yallara, Kojonup, Mitika, Carrolup, and new line SV97181‐8) and a commercial oat variety were milled into flour and added to wheat flour at 10, 20, and 30% to produce oat‐enriched white salted noodles. The purpose of the study was to determine the quality characteristics of the oat flours and to assess the influence the oat flour blends had on noodle texture, color, and sensory characteristics. In addition, another goal was to determine whether the different oat cultivars had similar potential to provide health benefits by measuring the β‐glucan content before and after processing. The results indicated that protein, ash content, and noodle firmness increased with the increased percentage of oat flour in the noodle formulations, whereas the pasting properties of the noodle wheat–oat flour blends did not differ significantly. The color of raw noodle sheets and boiled noodles changed significantly with oat incorporation and resulted in lower lightness/brightness, higher redness, lower yellowness, and lower color stability in comparison to standard wheat white salted noodles. Noodles made with the lowest oat percentage (10%) scored highest for all sensory parameters and were significantly different in appearance, color, and overall acceptability compared with noodles made with 20 and 30% oat flour. The β‐glucan content of the flour blends increased with the increase in the level of oat incorporation but subsequently decreased during processing into noodles. The decrease in the β‐glucan content varied across the different oat cultivars and levels of incorporation into the noodles. A new oat cultivar, SV97181‐8, exhibited the least β‐glucan loss during processing. In this study, the quality characteristics of white salted noodles enriched with oat flour from Western Australian cultivars were determined to provide essential information for the commercial development of healthier noodles.     

Alkaline‐Carbonate Noodles from Hard Winter Wheat Flours Varying in Protein,Swelling Power,and Polyphenol Oxidase Activity

The effects of wheat protein and starch on yellow‐alkaline noodles have not been fully clarified. Twenty‐four hard winter wheats with varying protein, hot‐water swelling power (SP₉₅), and polyphenol oxidase (PPO) activity were milled into long‐patent and short‐patent flours. Protein, SP₉₅, and PPO activity in the 48 flours were 8.2–12.9%, 16.2–24.1 g/g, and 80–157 ΔA₄₈₀/mg of protein/min, respectively. Lightness of raw noodles declined with increasing protein and PPO levels but yellowness decreased and then increased. Tensile force to break the cooked noodles was positively correlated with SP₉₅ and protein. Compression (50%) force of noodles made from flour with high SP₉₅ ≈21 g/g, averaged ≈20% below those made from low SP₉₅ ≈17 g/g of flour. Compression force was measured in the long dimension of a single noodle strand using a rectangular probe. The instrumental measurements suggest that alkaline noodles made from a single‐null partial‐waxy wheat with medium SP₉₅ ≈19.9 g/g will have a tender bite and a cohesive texture compared with those from a low SP₉₅ wheat with a hard bite and fracturable texture. Furthermore, alkaline noodles from a double‐null partial‐waxy wheat with high SP₉₅ will have an extra soft bite unless flour protein is above ≈12.5%. Hard‐white, dual‐purpose wheat should have a low level of PPO and, depending on the preferred noodle‐eating texture, a low to medium SP₉₅ level. Such wheats with medium protein levels (11–12%) are well suited for alkaline noodles because of improved color and surface smoothness, whereas the same wheats with 12–13% protein are well suited for bread. Wheats with medium SP₉₅ also reduce cooking loss and increase cooked yield.     

Relationship Between Protein Characteristics and Instant Noodle Making Quality of Wheat Flour

We investigated the relationship between the protein content and quality of wheat flours and characteristics of noodle dough and instant noodles using 14 hard and soft wheat flours with various protein contents and three commercial flours for making noodles. Protein content of wheat flours exhibited negative relationships with the optimum water absorption of noodle dough and lightness (L*) of the instant noodle dough sheet. Protein quality, as determined by SDS sedimentation volume and proportion of alcohol‐ and salt‐soluble protein of flour, also influenced optimum water absorption and yellow‐blueness (b*) of the noodle dough sheet. Wheat flours with high protein content (>13.6%) produced instant noodles with lower fat absorption, higher L*, lower b*, and firmer and more elastic texture than wheat flours with low protein content (<12.2%). L* and free lipid content of instant noodles were >76.8 and <20.8% in hard wheat flours of high SDS sedimentation volume (>36 mL) and low proportion of salt‐soluble protein (<12.5%), and <75.7 and >21.5% in soft wheat flours with low SDS sedimentation volume (<35 mL) and a high proportion of salt‐soluble protein (>15.0%). L* of instant noodles positively correlated with SDS sedimentation volume and negatively correlated with proportion of alcohol‐ and salt‐soluble protein of flour. These protein quality parameters also exhibited a significant relationship with b* of instant noodles. SDS sedimentation volume and proportion of salt‐soluble protein of flours also exhibited a significant relationship with free lipid content of instant noodles (P < 0.01 and P < 0.001, respectively). Protein quality parameters of wheat flour, as well as protein content, showed significant relationship with texture properties of cooked instant noodles.     

Impacts of SSIIa‐A Null Allele on Durum Wheat Noodle Quality

A small increase in amylose content may impact end‐product quality of wheat. The effect of elevated amylose content in durum wheat is not known. We surveyed 255 durum wheat accessions and found two genotypes that lacked the SGP‐A1 protein. These genotypes were crossed to Mountrail, an adapted durum genotype, to create populations segregating for the SSIIa‐Ab null allele. Our goal was to determine the influence of allelic variation at the SSIIa‐A locus on semolina properties and end‐product quality with noodles as a test product. Amylose content increased 3% and cooked noodle firmness increased 2.8 g·cm for the SSIIa‐Ab class compared with the SSIIa‐Aa class for the PI 330546 source, but no change in either trait was detected between classes for the IG 86304 source. The SSIIa‐Ab class had a 10% reduction in flour swelling compared with the SSIIa‐Aa class for both crosses. Grain protein and semolina yield did not differ between SSIIa‐A classes. The relationship between flour swelling power and noodle firmness did not differ between SSIIa‐A allelic classes within a cross. The different results for amylose content and noodle firmness between these sources may be because the two sources of the SSIIa‐Ab null mutation contributed different linkages to the segregating populations. Results show that the SSIIa‐Ab allele could be used to produce durum‐based products that are slightly more firm in texture. However, the effect of the SSIIa‐Ab allele may depend on the source.     

不同品种小麦粉的粉质特性对速冻熟制面条品质的影响

为研究不同品种小麦粉与速冻熟制面条质构特性之间的关系,选取30种小麦制粉,用FOSS定氮仪、快速黏度仪、粉质仪和拉伸仪等测定面粉品质指标,制作速冻熟制面条,用质构仪测定质构特性。采用描述性统计、主成分和聚类分析方法对30种小麦面粉和速冻熟制面条的质构关系进行了分析。结果表明:不同品种小麦粉的湿面筋、糊化温度、弱化度、粉质质量指数与硬度呈极显著相关(P0.01);蛋白质、湿面筋、总淀粉含量、最终黏度、回生值、糊化温度、粉质吸水率、粉质曲线稳定时间、面团形成时间、弱化度、粉质质量指数、拉伸曲线面积、拉伸阻力、最大拉伸阻力与剪切力呈极显著相关(P0.01);小麦粉的粉质特性,除衰减值、峰值时间和延伸度外,均与拉伸力呈极显著相关(P0.01)。根据方差贡献率提取出可以反映原变量84.023%信息的5个因子,因子1主要反映面粉的粉质拉伸特性,因子2反映小麦粉糊化特性,因子3反映蛋白质特性,因子4和因子5共同反映小麦粉的淀粉特性。这些性状在小麦粉的评价方面起着重要作用,在加工中要注重对它们的选择。聚类分析将30种小麦粉分为4类,结果表明,不能仅凭小麦粉的指标数据和质构数据来选择制作速冻熟制面条的原料,还需考虑到感官评价的影响。该结论可为小麦粉在速冻熟制面条加工应用方面提供一定的理论参考。     

Physicochemical Properties of Flours that Relate to Sorghum Couscous Quality

Flours from eight sorghum cultivars were evaluated for their couscous-making ability with the objective of finding predictive relationships between flour physicochemical properties and couscous quality. Chemical composition, physical characteristics, and pasting and gelatinization properties of the flours were determined. A laboratory procedure was used to prepare couscous. Couscous properties were evaluated and compared to a laboratory-prepared and a commercial durum wheat couscous. Hard grain produced flours containing a high proportion of coarse particles with low ash and high damaged starch content and yielded a higher proportion of desirable sorghum couscous granules. A variety of colors ranging from brown to yellow were obtained when flours were processed into couscous. Cooked sorghum couscous stickiness was positively correlated (r = 0.89, P < 0.01) with the amount of damaged starch in flour. Cooked couscous hardness correlated positively (r = 0.79, P < 0.05) with apparent amylose content of flour and correlated negatively (r = -0.75, P < 0.05) with flour peak viscosity. Durum wheat couscous was lighter and had more yellow color than sorghum couscous. Sorghum couscous was stickier and harder than durum wheat couscous. Addition of 2% oil to the cooking water considerably improved the texture of some sorghum couscous to a level comparable to that of durum wheat couscous.     

Delineating the role of polyphenol oxidase in the darkening of alkaline wheat noodles

This study evaluated the effects of inhibitors on polyphenol oxidase (PPO) activity, the effect of the PPO inhibitor tropolone on noodle darkening, and the correlation of PPO activity with darkening of alkaline noodles. The PPO inhibitors tropolone and salicylhydroxamic acid (each at 1 microM) reduced kernel PPO activity by approximately 50% in three hexaploid wheat cultivars but did not inhibit PPO activity in the two very low PPO cultivars, durum Langdon, and the synthetic hexaploid-derived ID580. Tropolone (100 microg/g flour) inhibited alkaline noodle darkening (deltaL*) by 13-25% in the low PPO wheat cultivar, ID377s, and by 39-54% in the high PPO wheat cultivar, Klasic. Alkaline noodle darkening among 502 wheat samples was correlated with kernel PPO activity (r = 0.64). Results substantiate the hypothesis that PPO plays a major role in darkening of alkaline noodles. However, results also indicate that substantial darkening would occur even at zero PPO activity, as measured in the kernel PPO assay. Therefore, darkening of alkaline noodles is probably due to the cultivar-specific level of PPO activity and the presence of at least one additional darkening mechanism. Further investigation is required to identify the phenolic discoloration agent(s) and to determine the potential roles of non-PPO discoloration mechanisms, both enzymatic and nonenzymatic, in wheat products.     

Effects of Flour Extraction Rate,Added Water,and Salt on Color and Texture of Chinese White Noodles

Both cultivar and noodle composition and preparation have important effects on noodle quality. In this study, the effects of flour extraction rate (50, 60, and 70%), added water (33, 35, and 37%), and salt concentration (0, 1, and 2%, w/w) on color and texture of Chinese white noodle (CWN) were investigated using flour samples from five leading Chinese wheat cultivars. The five samples showed large variations in protein content, ash content, flour color, farinograph, and extensigraph parameters, and starch pasting properties. Analyses of variance indicated that cultivar, flour extraction rate, level of water addition, salt concentration, and the interactions had significant effects on color of raw noodle sheets and color and textural properties of CWN. Cultivar and water addition were more important sources of variation than flour extraction rate and salt concentration. The brightness (L*) and redness (a*) values of raw noodle sheets were significantly reduced and increased, respectively, as flour extraction rate increased from 50 to 70%, and noodle scores were slightly higher at flour extraction rates of 50%. Water addition showed different effects on raw noodle sheet color at 2 and 24 hr, and a significant improvement was observed for noodle appearance, firmness, viscoelasticity, smoothness, and total score as water addition increased from 33 to 37%. L* of raw noodle sheets, and firmness and viscoelasticity of cooked noodles, were significantly improved, but noodle flavor significantly deteriorated as salt concentration increased from 0 to 2%; 1% salt produced the highest noodle score. Thus, the recommended composition for laboratory preparation of CWN is 60% flour extraction, 35% water addition, and 1% salt concentration.     

Relationship Between Grain,Semolina, and Whole Wheat Flour Properties and the Physical and Cooking Qualities of Whole Wheat Spaghetti

Durum breeding programs need to identify raw material traits capable of predicting whole wheat spaghetti quality. Nineteen durum wheat (Triticum turgidum L. var. durum ) cultivars and 17 breeding lines were collected from 19 different environments in North Dakota and were evaluated for physical and cooking qualities of whole wheat spaghetti. Raw material traits evaluated included grain, semolina, and whole wheat flour characteristics. Similar to traditional spaghetti, grain protein content had a significant positive correlation with cooking quality of whole wheat spaghetti. Stepwise multiple regressions showed grain protein content, mixogram break time, and wet gluten were the predominant characteristics in predicting cooked firmness of whole wheat spaghetti.     

Great Northern Bean Could Improve the Nutritional Value of Instant Noodles

Instant noodles were prepared by substituting hard red winter (HRW) wheat flour with Great Northern bean powder (GNBP) at selected levels (0–60%) using a pilot‐scale noodle processing machine. The functional properties, water absorption, water solubility, and pasting profiles of flour mixtures were tested to verify the process tolerances of ingredients. Prepared noodle samples were evaluated for color, cooking quality, texture, and sensory properties. Slight color differences, an increased cooking loss, and reduced chewiness, cohesiveness, and hardness were observed in cooked noodles that were prepared with GNBP up to 25% of HRW wheat flour weight. The results suggest that HRW wheat flour could be replaced up to 20% (w/w) with GNBP, while still using the conventional processing conditions, to improve the product nutritional value (i.e., increased protein and fiber contents and reduced fat content) (P < 0.05).