Effects of Protein Content and Composition on White Noodle Making Quality: Color

Wheat cultivars, representing three winter and three spring wheats were grown in western Canada with six levels of nitrogen fertilizer and flours were prepared from them with an extraction rate of 65%. Using a chromameter, flour color and the color of uncooked white noodle sheets made from these flours with different resting times were assessed. The cooked noodle sheet color was also assessed. While protein content initially declined with added nitrogen and increased with further nitrogen addition, brightness (L*) of flour decreased and redness (a*) and yellowness (b*) increased. Positive correlation coefficients of flour brightness with particle size index (PSI) were also observed. Flour redness (a*) and yellowness (b*) were also affected by flour moisture content, whereas L* values were not significantly correlated with moisture contents. For the uncooked white noodle sheet, as protein content increased brightness decreased but there was an increase in a* and b* values. Thus, the L* value for noodle sheets was negatively correlated with the a* and b* values. The percentages of monomeric protein and soluble glutenin in flour were equal to or better than protein content in relation to most noodle sheet color characters. Uncooked noodle sheet brightness decreased, while redness and yellowness increased with rest time. In general, uncooked white noodle sheets prepared from different wheat flours can be ranked in terms of brightness and yellowness within each level of nitrogen fertilization.     

Measurement of Color,Gloss, and Translucency of White Salted Noodles: Effects of Water Addition and Vacuum Mixing

Sensory evaluation showed panelists could detect small differences in gloss and translucency in boiled white salted noodles (WSN) but sensory evaluation requires significant resources. Methods for the measurement of noodle gloss and translucency in boiled WSN were developed and the effects of hardness, protein, water addition, and vacuum mixing on these visual sensory characteristics and color (as measured by CIE L*, a*, and b*) were investigated. Noodles derived from hard wheats at low flour protein contents were more translucent than noodles from soft wheat flour at low protein. This trend changed at the highest flour protein contents observed. Translucency of the soft wheat noodles increased to levels equal to or exceeding the translucency of high protein hard wheat noodles. Translucency of all noodle varieties increased as flour protein increased. CIE L* decreased, a* increased, and b* increased when water addition to dough increased from 30 to 35%, but there was no further effect on color when water addition was increased to >35% for raw soft and hard WSN. Boiled noodle translucency was significantly increased when water addition to the dough was increased from 35 to 38% and when noodles made from soft wheat flour were mixed under vacuum. Vacuum mixing significantly increased gloss of boiled noodles made from soft wheat flours.     

Evaluation of White Salted Noodles Enriched with Oat Flour

Oat consumption is regarded as having significant health benefits. The enrichment of white salted noodles with oat flour would provide a potential health benefit but may affect the texture and sensory quality. Oat cultivars grown in Western Australia (Yallara, Kojonup, Mitika, Carrolup, and new line SV97181‐8) and a commercial oat variety were milled into flour and added to wheat flour at 10, 20, and 30% to produce oat‐enriched white salted noodles. The purpose of the study was to determine the quality characteristics of the oat flours and to assess the influence the oat flour blends had on noodle texture, color, and sensory characteristics. In addition, another goal was to determine whether the different oat cultivars had similar potential to provide health benefits by measuring the β‐glucan content before and after processing. The results indicated that protein, ash content, and noodle firmness increased with the increased percentage of oat flour in the noodle formulations, whereas the pasting properties of the noodle wheat–oat flour blends did not differ significantly. The color of raw noodle sheets and boiled noodles changed significantly with oat incorporation and resulted in lower lightness/brightness, higher redness, lower yellowness, and lower color stability in comparison to standard wheat white salted noodles. Noodles made with the lowest oat percentage (10%) scored highest for all sensory parameters and were significantly different in appearance, color, and overall acceptability compared with noodles made with 20 and 30% oat flour. The β‐glucan content of the flour blends increased with the increase in the level of oat incorporation but subsequently decreased during processing into noodles. The decrease in the β‐glucan content varied across the different oat cultivars and levels of incorporation into the noodles. A new oat cultivar, SV97181‐8, exhibited the least β‐glucan loss during processing. In this study, the quality characteristics of white salted noodles enriched with oat flour from Western Australian cultivars were determined to provide essential information for the commercial development of healthier noodles.     

Assessment of Oriental Noodle Appearance as a Function of Flour Refinement and Noodle Type by Image Analysis

Fresh alkaline and white salted noodle sheets prepared from patent and straight‐grade flours of the western Canadian wheat class Canadian Prairie Spring White (CPSW), Karma and Vista, were visually characterized by image analysis over a 24‐hr period. In both cultivars, the number of specks increased with time although the actual numbers were significantly influenced by both detection size and sensitivity. Maximum speck generation was observed in Karma's straight‐grade kansui noodle sheets, increasing from 12.9 specks/cm² at 1 hr to 58.0 after 24 hr. Lowest speck numbers were observed in Vista's patent white salted noodle sheets with 4.5 specks/cm² at 1 hr increasing to 5.6 after 24 hr. The image analysis system was able to show that in combination with a significant cultivar effect, both flour refinement and noodle type significantly influenced the number of discolored specks detected over time. Straight‐grade flours yielded more specks than the patent flours, while salted noodle sheets consistently had fewer specks compared with their kansui noodle sheets at all time intervals. No differences were detected in the average size of the specks due to cultivar or noodle type in the patent flour noodle sheets. Noodle sheets made from Karma straight‐grade flour had significantly larger specks than noodle sheets made from Vista's straight‐grade flour for both noodle types. Patent flour kansui specks were lighter than their salted counterparts. Straight‐grade noodle specks were darker than their corresponding patent flours, but this difference was significant only in the kansui noodle sheets. Specks of all noodle sheets were characterized by darkness distribution profiles that highlighted key differences between the wheat cultivar samples due to noodle type and flour refinement.     

Genotypic and Environmental Modification of Asian Noodle Quality of Hard Winter Wheats

The relative effects of environment, genotype, and their interactions on the modification of Asian noodle quality attributes were assessed using 38 winter wheat (Triticum aestivum L.) cultivars and breeding lines grown in replicated trials at three Nebraska locations in harvest year 2000. Noodle color was determined in both white salted and yellow alkaline procedures, and noodle textural features were investigated by producing white salted noodles. Significant environmental, genotypic, and genotype‐by‐environment variation was observed for nearly all initial and 24‐hr noodle color traits in both types of noodles. Significant genotypic effects were observed for several textural traits, while significant environmental effects were observed only for noodle hardness and water uptake. However, among the noodle textural traits, the genotype‐by‐environment interaction was significant only for noodle firmness. High and significant phenotypic correlations were observed between color traits in the two noodle applications. Genetic correlations were of lower magnitude, indicating the possibility of breeding wheats specifically for various noodle color types. Strong negative phenotypic and genetic correlations were observed between flour protein content and noodle brightness (L*) values in both yellow alkaline and white‐salted applications. Textural traits largely were independent of noodle color traits. When significant phenotypic or genetic correlations were observed between variable pairs, invariably similar correlations were observed with flour protein content. Noodle cutting force, cutting area, and final thickness showed strong phenotypic and genetic correlations with each other and with protein content. These variables largely were independent of noodle firmness and hardness, which were, in turn, more dependent on alleles at the wheat wx‐A1 and wx‐B1 (waxy) loci. Noodle firmness was greatest in flours from wild‐type wheats; lines with a null allele only at the wx‐A1 locus did not differ from wild‐type. Softest noodles were produced from lines carrying null alleles at both wx‐A1 and wx‐B1, while lines with a null only at wx‐B1 were intermediate in softness.     

Effects of Vacuum Mixing,Water Addition,and Mixing Time on the Quality of Fresh Chinese White Noodles and the Optimization of the Mixing Process

In this study, the effects of mixing process parameters (degree of vacuum, water addition, and mixing time under vacuum) on the cooking and sensory quality properties of Chinese white noodles were investigated by using one commercial‐scale noodle production line and one typical commercial wheat flour. Noodle appearance, firmness, elasticity, smoothness, and total quality scores were significantly improved as the degree of vacuum increased from 0 to 0.06 MPa, although lower sensory scores and larger cooking losses occurred when noodles were mixed at 0.08 MPa. Noodles with a water addition of 35% had the highest total score and the highest scores for each sensory factor. As mixing time increased, the sensory score of cooked noodles increased initially and then decreased. With a mixing time of 7 min, the sensory score was the highest and cooking loss was the lowest. The results of response surface methodology indicated that fresh noodle quality was most affected by the water addition, followed by vacuum degree. Added water was a more important source of variation for appearance, firmness, stickiness, smoothness, total score, and cooking loss than degree of vacuum and mixing time, whereas degree of vacuum was the predominant source of variation for color and elasticity. The interactions between the factors had little effect on sensory and cooking properties. The optimal mixing conditions were determined to be as follows: degree of vacuum, 0.06 MPa; added water, 35.6%; and mixing time, 7.25 min. Furthermore, vacuum mixing produced a more even, coherent, and closed microstructure for the sheeted dough than nonvacuum mixing.     

Comparison of Asian Noodles from Some Hard White and Hard Red Wheat Flours

Asian noodles were prepared by an objective laboratory method that included adding optimum water to the dry ingredients, mixing the ingredients to homogeneous salt distribution, and sheeting of the dough under low shear stress. The lightness (L*) values of alkaline‐ and salt‐noodle doughs made from 65% extraction hard white wheat flours (except KS96HW115 flour at ≈70% extraction) were higher than those from 60% extraction hard red wheat flours (except Karl 92 flour at ≈70% extraction). A hard white spring wheat, ID377s, and a Kansas line of hard white winter wheat, KS96HW115, to be released in 2000, gave the highest L* values for dough sheets stored for 2 and 24 hr at 25°C. Cooking losses were 5–9 percentage points higher for alkaline noodles than salt noodles, but the cooking yields of the two types of Asian noodles were almost the same. Cooked alkaline noodles made from a high‐swelling flour (SP₉₃≈21 g/g) gave higher tensile strength than those made from several low‐swelling flours (SP₉₃ ≈15 g/g) with the same protein contents (≈12.5%). However, the cooked salt noodles gave the same tensile strength.     

Investigation of a Small‐Scale Asymmetric Centrifugal Mixer for the Evaluation of Asian Noodles

A high throughput centrifugal mixer capable of using smaller amounts of flour (50 g) was evaluated for the production of oriental alkaline noodles. The unit requires a small footprint on a laboratory bench and offers variable speed mixing (300–3,500 rpm) for 5–60 sec. Three different mixing bowls, plain, pin, and paddle, were evaluated for the small‐scale production of alkaline noodles using straight‐grade flour derived from Canada Western Red Spring (CWRS) and Canada Prairie White Spring (CPSW) wheat. Under optimized mixing conditions (3,000 rpm for 30 sec), the pin and paddle bowls produced noodle dough with crumb size distribution and adhesion characteristics consistent with commercial requirements. The plain bowl produced dough with larger undesirable dough chunks and showed excessive heat buildup. Noodle sheets produced from this dough were not comparable in color characteristics to conventionally produced noodle sheets. Noodles prepared using the paddle mixer also displayed some significantly different color and texture characteristics than conventionally prepared noodles. However, raw noodle sheets or cooked noodles of either wheat class, prepared using the pin bowl mixer, displayed color values (L*, a*, and b*) at 2 and 24 hr and cooked noodle texture characteristics (bite, chewiness, resistance to compression, and recovery) comparable to a conventional laboratory‐scale Hobart type mixer. In addition to the very short mixing time and small equipment footprint for the centrifuge mixer, rapid throughput is enhanced by the ability to rapidly clean or interchange bowls and to potentially vary sample size to as little as 5 g. These attributes should be particularly useful in earlier generation breeder programs where large numbers of samples require rapid screening.     

Quality Characteristics of Yellow Alkaline Noodles Enriched with Hull‐less Barley Flour

Roller milled flours from eight genotypes of hull‐less barley (HB) with normal, waxy, zero amylose waxy (ZAW), and high amylose (HA) starch were incorporated at 20 and 40% (w/w) with a 60% extraction Canada Prairie Spring White (CPSW, cv. AC Vista) wheat flour to evaluate their suitability as a blend for yellow alkaline noodles (YAN). The barley flour supplemented noodles were prepared using conventional equipment. Noodles containing 40% HB flour required less work input than the corresponding 20% blend noodles due to a higher water absorption at the elevated level of HB flour addition, which probably caused them to soften. The addition of any HB flour at either level to the CPSW flour resulted in significantly decreased brightness (L*) and yellowness (b*), elevated redness (a*), concomitant with a significantly greater number of specks per unit area of noodle sheet compared with the control flour. The addition of 40% HB flour to YAN decreased cook time and cooking losses. Noodle firmness, as determined by maximum cutting stress (MCS), was significantly increased by the addition of 40% HB flour. Noodle chewiness, as determined by the texture profile analysis (TPA), was affected by the type of starch in the barley samples; the addition of waxy and ZAW HB flour decreased chewiness, whereas normal and HA HB flour increased chewiness of composite noodles.     

Effects of Wheat Starch Granule Size Distribution on Qualities of Chinese Steamed Bread and Raw White Noodles

Starch is a crucial component determining the processing quality of wheat‐based products such as Chinese steamed bread (CSB) and raw white noodles (RWN). Flour from wheat cultivar Zhongmai 175 was used for fractionation into starch, gluten, and water solubles by hand washing. The starch fraction was successfully separated into large (>10 μm diameter) and small starch granules (<10 μm diameter) by repeated sedimentation. Flour fractions were reconstituted to original levels in the flour by using constant gluten and water solubles and varying the weight ratio of large and small starch granules. As the proportion of small granules increased in the reconstituted flours, farinograph water absorption increased, and amylose content, pasting peak viscosity, trough, and final viscosity decreased. Starch granule size distribution significantly affected processing quality of CSB and RWN. Superior crumb structure score (12.0) was observed in CSB made from reconstituted flour with 35% small starch granules. CSB made from reconstituted flours with 30 and 35% small starch granules exhibited the highest total scores, with values of 85.4 and 83.3, respectively. Significant improvements in color, viscoelasticity, and smoothness of RWN were obtained with an increase in small starch granule content, and reconstituted flours with 30–40% small starch granules produced RWN with moderate firmness.     

Effect of Processing,Formula and Measurement Variables on Alkaline Noodle Color—Toward An Optimized Laboratory System

A standardized laboratory method for assessing the color potential of flours for yellow alkaline (Cantonese) noodles is needed, especially for evaluating large numbers of small‐scale samples such as found in wheat breeding populations. To develop such a method, a number of processing and formula parameters were varied and judged for optimum level based on 1) discrimination and mean separation of flours, 2) sensitivity to minor variation in the protocol parameter, 3) practicality and simplicity for the technician, and 4) time efficiency. Four flours milled from single‐cultivar grain lots representing two with good and two with poor color potential were made into alkaline noodle sheets varying in thickness of 0.75–2.00 mm, water absorption of 33.0–39.0%, mixing time of 2–6 min, and NaCl levels of 0–4% (all flour weight basis). Commission Internationale de l'Eclairage (CIE) tristimulus color space (L*, a*, b*) values were measured at 0–24 hr using white, yellow, and black background tiles. Noodle sheet side and a dough resting period were examined. The flours themselves were a consistently large, significant source of variation for color, especially lightness (L*). Based on the optimization criteria, a noodle sheet thickness of 1.5–2.0 mm, an optimum to slightly over optimum water absorption (36% for the flours in this study) with some adjustment for protein content and dough handling properties, a mixing time of 4 min, no dough resting period, and 2% NaCl were selected. Color measurement at 24 hr on a white or otherwise light‐colored background tile was judged best using a consistent side of the noodle sheet. Resting doughs for 1 hr slightly improved handling and sheeting characteristics but was not included for time efficiencies.     

Lipids in Japanese Noodle Flours

Lipids in Japanese salt and alkaline noodle flours and in Australian soft white wheat (SWW) flours were extracted and compared. Nonstarch lipid (NSL) and free lipid (FL) levels ranges were 1.33–1.71% and 0.84–1.04%, respectively, for nine Japanese salt noodle flours compared to 1.43–1.50% and 0.97–1.00% for three Australian SWW flours used mainly to prepare salt noodle. The six Japanese alkaline noodle flours averaged ≈15% less NSL and 20% less FL than the Australian flours. The NSL was separated by column chromatography into nonpolar lipid (NL), glycolipid (GL), and phospholipid (PL) fractions. The NSL extracted from salt noodle and Australian flours contained ≈36% more NL than that from alkaline noodle flour. The composition of NSL was similar for salt noodle and Australian SWW flours but was different for alkaline noodle flour. Japanese salt noodle flour could be differentiated from alkaline noodle flour by the higher levels of NSL and FL, although those elevated levels may be caused in part to the somewhat higher extraction rate for the salt-noodle flours. However, two parameters independent of extraction rate, the ratios of NL/PL and NL/ash were 47 and 15% higher, respectively, in the salt vs. alkaline noodle flours.     

The Impact of Oat Quality on White Salted Noodles Containing Oat Flour

This research compared the physicochemical properties of six milling oat cultivars from Western Australia over two growing seasons (2011 and 2012). Variations among the cultivars in physicochemical properties, particularly β‐glucan content, were assessed to determine their suitability for incorporation into white salted noodles at a level of 30% of the flour component. The average across six oat cultivars grown in 2012 was significantly higher (P < 0.05) for protein content, lipid content, and volume of smaller sized particles (<100 µm) and significantly lower for ash content, starch damage, and volume of larger particles (>100 µm) in comparison with the average across the same oat cultivars grown in 2011. The year of cultivation by cultivar interaction was significant (P < 0.05) for ash content, protein content, β‐glucan content, starch damage, and particle size. Oat cultivar Mitika had the highest peak viscosity for 100% oat flour (whole groat) and 30% oat–wheat (OW) flour blend, which may be owing to lower amylose percentage, high protein content, and greater volume of smaller particles. The effect of growing season had greater impact on OW noodle firmness than the genetic effect of cultivars. The eating and cooking quality attributes of OW noodles, such as color, color stability, firmness, and cooking solid loss were superior for those incorporated with 2012 oat flour (whole groat) compared with 2011 oat flour. Among the six oat cultivars, Williams produced noodles with poor cooking and eating quality, and Mitika was easier to handle during processing and produced noodles with superior brightness and color stability in comparison with other oat cultivars evaluated.     

Baking Performance of Durum and Soft Wheat Flour in a Sponge-Dough Breadmaking Procedure

Breadmaking properties were determined for formulations that included durum, soft, and spring wheat flour, using a pound-loaf sponge-dough baking procedure. Up to 60% durum or soft wheat flour plus 10% spring wheat flour could be incorporated at the sponge stage for optimum dough-handling properties. At remix, the dough stage required 30% spring wheat flour. Bread made with 100% spring wheat flour was used as a standard for comparison. Bread made with 60% durum flour exhibited internal crumb color that was slightly yellow. When storing pound bread loaves for 72 hr, crumb moisture content remained unchanged. Crumb firmness and enthalpy increased the most in bread made with 60% soft wheat flour. Crumb firmness increased the least in bread made with 100% spring wheat flour. Enthalpy changed the least in bread made with 60% durum flour. Crumb moisture content was significantly correlated with crumb firmness (r = -0.82) and enthalpy (r = -0.65). However, crumb moisture content was specific for each type of flour and a function of flour water absorption; therefore, these correlations should be interpreted with caution. Crumb firmness and enthalpy were significantly correlated (r = 0.65). Ball-milling flour resulted in an increase in water absorption of ≈2% and in crumb moisture content of ≈0.5% but had no effect on either crumb firmness or enthalpy.     

Characteristics of Noodle Flours from Japan

The compositions and physical properties of Japanese salt and alkaline noodle flours were contrasted and compared to those of flours from U.S. hard white and soft white wheats (HWW and SWW) and from Australian SWW wheats often segregated for salt noodles. The alkaline noodle flours averaged 11.5% protein, which was 3% higher than the salt noodle flours, and they had lower ash content (0.35 vs. 0.41%). Granulation of the salt noodle flours showed the same proportion of small particles (<38 μm) as in soft wheat flours but different levels of intermediate and large particles. The level of small particles was ≈10% greater in salt noodle flours than in the alkaline noodle flours. The alkaline noodle flours had ≈8% more fine particles and 2.5% more damaged starch than the HWW flours, which is consistent with fine grinding of hard wheat flour in the noodle flour. Starch damage also was higher in the salt noodle flours (5.3%) than in the SWW flours. The salt noodle flours had a higher sodium dodecyl sulfate (SDS) sedimentation volume and a higher gluten index than the SWW flours from the United States. The SDS volume and gluten index were lower for the alkaline noodle flours than for the HWW flours, showing the preference for a mellow gluten of low-intermediate strength in alkaline noodle flour. Mixograph data also supported the conclusions of mellow gluten in alkaline noodle flour. The swelling powers (1.7% at 92.5°C) for Australian SWW, salt noodle, U.S. HWW, U.S. SWW, and alkaline noodle flours, were 19.4, 18.1, 17.0, 16.1, and 15.8 g/g, respectively, showing the preferences for high- and low-swelling starch, respectively, in the salt noodle and the alkaline noodle flour. A similar order of flour swelling was indicated by peak viscosity of flours heated at 12% solids in starch paste viscosity analysis. Water holding capacity of flour was correlated highly (r = 0.95, P < 0.01) with swelling power, both measured at 1.7% flour solids at 92.5°C.     

Great Northern Bean Could Improve the Nutritional Value of Instant Noodles

Instant noodles were prepared by substituting hard red winter (HRW) wheat flour with Great Northern bean powder (GNBP) at selected levels (0–60%) using a pilot‐scale noodle processing machine. The functional properties, water absorption, water solubility, and pasting profiles of flour mixtures were tested to verify the process tolerances of ingredients. Prepared noodle samples were evaluated for color, cooking quality, texture, and sensory properties. Slight color differences, an increased cooking loss, and reduced chewiness, cohesiveness, and hardness were observed in cooked noodles that were prepared with GNBP up to 25% of HRW wheat flour weight. The results suggest that HRW wheat flour could be replaced up to 20% (w/w) with GNBP, while still using the conventional processing conditions, to improve the product nutritional value (i.e., increased protein and fiber contents and reduced fat content) (P < 0.05).     

Effect of Amaranthus and Buckwheat Proteins on Wheat Dough Properties and Noodle Quality

Isoelectric protein concentrates (IPC) were prepared from one buckwheat (Fagopyrum esculentum) and five Amaranthus genotypes. Their effect on the mixing properties of a wheat flour was studied. Mixograph and dynamic oscillatory measurements showed significant increases in dough strength with the addition of 2 and 4% IPC, correlated to the water-insoluble fraction level of the IPC. The same IPCs were used at 2% level to supplement a wheat flour in making Chinese dry noodles. Measurable changes in both the raw and cooked noodle color were observed, and the change caused by addition of buckwheat IPC was substantial. Some of the IPCs caused an increase in cooking loss and only one caused an increase in weight, while increase in volume of the cooked noodles was not significantly affected. The changes in the rheological properties of cooked noodles due to addition of IPCs were measured. Overall, their effects were favorable, but the changes were statistically significant in only a few cases. The substantial dough-strengthening effect of the IPCs was hence not effectively translated into improved cooked noodle quality, and possible reasons for this are discussed.     

Reduced Amylose Effects on Bread and White Salted Noodle Quality

Amylose content in wheat endosperm is controlled by three Wx loci, and the proportion of amylose decreases with successive accumulation of Wx null alleles at the three loci. The proportion of amylose is believed to influence end‐use quality of bread and Asian noodles. The objectives of this study were to determine influence of the allelic difference at Wx‐B1 locus on bread quality, bread firmness, and white salted noodle texture in a spring wheat cross segregating for the Wx‐B1 locus and in a set of advanced spring wheat breeding lines differing in allelic state at the Wx‐ B1 locus. In addition, we examined the relationship between amylose content and flour swelling properties on bread and noodle traits. Fifty‐four recombinant inbred lines of hard white spring wheat plus parents were grown in replicated trials in two years, and 31 cultivars and breeding lines of hard spring wheat were grown in two locations. Bread and white salted noodles were processed from these trials. The presence of the Wx‐B1 null allele reduced amylose content by 2.4% in a recombinant inbred population and 4.3% in a survey of advanced breeding lines and cultivars compared with the normal. The reduced amylose was accompanied by an average increase in flour swelling power (FSP) for the Wx‐B1 null group of 0.8 g/g for the cross progeny and 2.3 g/g for the cultivar survey group. The Wx‐B1 allelic difference did not affect flour protein in cross progeny where the allelic difference was not confounded with genetic background. Bread from the Wx‐B1 null groups on average had increased loaf volume and was softer than the normal group for the cross progeny and cultivar survey group. The Wx‐B1 allelic difference altered white salted noodle texture, most notably noodle springiness and cohesiveness where the Wx‐B1 null groups was more springy and more cohesive than the normal groups for both sets of genetic materials. Flour protein was more highly related to loaf volume than were FSP or amylose. Both flour protein and FSP were positively related to noodle textural traits, but especially noodle springiness and cohesiveness.     

Refrigerated Storage of Yellow Alkaline Durum Noodles: Impact on Color and Texture

Durum wheat straight‐grade flour samples, representing the cultivars Commander and Strongfield, a composite cargo mixture of Canada Western Amber Durum cultivars and a Japanese commercial durum flour were used to make yellow alkaline noodles. A Canada Western Red Spring common wheat composite straight‐grade flour was included in the study for comparative purposes. Alkaline noodles were prepared using 1% w/w kansui reagent (sodium and potassium carbonates, 9:1) and stored for 1, 2, 3 and 7 days at 4°C to duplicate a normal convenience store operation. The raw noodle color of the durum alkaline noodles exhibited significantly better noodle brightness, L*, and yellowness, b*, as compared to noodles prepared from common wheat at all storage periods. The number of discolored specks in the durum flour based noodles was significantly lower as well as significantly lighter than those of common wheat at all time intervals. Noodles prepared from Commander, Strongfield, or the cargo composite flours displayed significantly lower water uptake during cooking than both the commercial durum flour and the common wheat noodles. The commercial durum flour noodles displayed the thinnest cooked noodles, while the common wheat flour noodles were the thickest. Evaluation of cooked noodle texture, immediately after production and subsequent storage of the raw noodles at 4°C for 1, 2 and 3 days before cooking showed a general increase in maximum cutting stress (MCS) with storage. Noodles prepared from Commander flour consistently display MCS values exceeding those of CWRS as well as the highest resistance to compression (RTC) and recovery (REC) measurements. The visual improvements in noodle brightness, enhanced yellowness, reduced speck numbers and darkness in combination with equivalent to improved cooked noodle texture attributes compared with common wheat flour suggests that durum flours are an ideal material for fresh, refrigerated yellow alkaline noodles.     

Characteristics and Protein Subunit Composition of Flour Mill Streams from Different Commercial Wheat Classes and Their Relationship to White Salted Noodle Quality

Proximate characteristics and protein compositions of selected commercial flour streams of three Australian and two U.S. wheats were investigated to evaluate their effects on the quality of white salted noodles. Wheat proteins of flour mill streams were fractionated into salt‐soluble proteins, sodium dodecyl sulfate (SDS)‐soluble proteins, and SDS‐insoluble proteins with a sequential extraction procedure. SDS‐soluble proteins treated by sonication were subsequently separated by nonreducing SDS polyacrylamide gel electrophoresis (SDS‐PAGE). There was a substantial amount of variation in distributions of protein content and protein composition between break and reduction mill streams. SDS‐insoluble proteins related strongly to differences in protein quantity and quality of flour mill streams. The soluble protein extracted by SDS buffer included smaller glutenin aggregates (SDS‐soluble glutenin) and monomeric proteins, mainly gliadin (α‐, β‐, γ‐, and ω‐types) and albumin and globulin. SDS‐soluble proteins of different flour mill streams had similar protein subunit composition but different proportions of the protein subunit groups. Noodle brightness (L) decreased and redness (a) increased with increased SDS‐insoluble protein and decreased monomeric gliadin. Noodle cooking loss and cooking weight gain decreased with increased glutenin aggregate (SDS‐soluble glutenin and SDS‐insoluble glutenin) and decreased monomeric gliadin. Noodle hardness, springiness, cohesiveness, gumminess, chewiness, tensile strength, breaking length, and area under the tensile strength versus breaking length curve increased with increased glutenin aggregate. Monomeric gliadin contributed differently to texture qualities of cooked noodles from glutenin aggregate. Monomeric albumin and globulin were not related to noodle color attributes (except redness), noodle cooking quality, and texture qualities of cooked noodles. The results suggested that variation in protein composition of flour mill streams was strongly associated with noodle qualities.