Modeling End‐Use Quality in U.S. Soft Wheat Germplasm

End‐use quality in soft wheat (Triticum aestivum L.) can be assessed by a wide array of measurements, generally categorized into grain, milling, and baking characteristics. Samples were obtained from four U.S. regional nurseries. Selected parameters included test weight, kernel hardness, kernel size, kernel diameter, wheat protein, polyphenol oxidase activity, flour yield, break flour yield, flour ash content, milling score, flour protein content, flour SDS sedimentation volume, flour swelling volume, Rapid Visco Analyzer peak paste viscosity, solvent retention capacity (SRC) parameters, total and water‐extractable arabinoxylan (TAX and WEAX, respectively), and cookie diameter. The objectives were to model cookie diameter and lactic acid SRC as well as to compare exceptionally performing varieties for each quality parameter. Cookie diameter and lactic acid SRC were modeled by using multiple regression analyses and all of the aforementioned quality parameters. Cookie diameter was positively associated with peak paste viscosity and was negatively associated with or modeled by kernel hardness, flour protein content, sodium carbonate SRC, lactic acid SRC, and water SRC. Lactic acid SRC was positively modeled by break flour yield, milling score, flour SDS sedimentation volume, and sucrose SRC and was negatively modeled by flour protein content. Exceptionally high‐ and low‐performing varieties were selected on the basis of their responses to the aforementioned characteristics in each nursery. High‐ and low‐performing varieties exhibited notably wide variation in kernel hardness, break flour yield, milling score, sodium carbonate SRC, sucrose SRC, water SRC, TAX content, and cookie diameter. This high level of variation in variety performance can facilitate selection for improved quality based on exceptional performance in one or more of these traits. The models described allow a more focused approach toward predicting soft wheat quality.     

Molecular Weight Distribution of Proteins in Hard Red Spring Wheat: Relationship to Quality Parameters and Intrasample Uniformity

Molecular weight distribution (MWD) of proteins extracted from hard red spring wheat was analyzed by size‐exclusion HPLC to investigate associations with wheat and breadmaking quality characteristics. Certain protein fractions were related to associations between wheat and breadmaking parameters, specifically when effect of quantitative variation of protein on those parameters was statistically eliminated by partial correlation analysis. SDS‐unextractable high molecular weight polymeric proteins had positive partial correlations with percent vitreous kernel content and breadmaking parameters, including mix time and bread loaf volume. SDS‐extractable protein fractions that were eluted before the primary gliadin peak had positive partial correlations with kernel hardness and water absorption parameters. The proportion of main gliadin fractions in total protein had a negative partial correlation with bread loaf volume and positive correlations with kernel hardness and water absorption parameters. Intrasample uniformity in protein MWD and kernel characteristics was estimated from three kernel subsamples that were separated according to single kernel protein content within individual wheat samples by a single‐kernel near‐infrared sorter. Wheat subsamples were significantly different in protein MWD. Intrasample uniformity in protein MWD did not differ greatly among wheat samples.     

Characterization of a Unique “Super Soft” Kernel Trait in Wheat

Kernel texture in wheat (Triticum sp.) is central to end‐use quality and utilization. Here we report the discovery of a novel soft kernel trait in soft white winter wheat (T. aestivum L.). Two heritable kernel phenotypes were selected among F₃‐derived sibs, hereafter designated “normal soft” (wild‐type) and “super soft.” Normal soft lines exhibited single kernel characterization system (SKCS) hardness index (HI) values typical of soft wheat (HI ≈ 20), whereas the super soft lines were unusually soft (HI ≈ 5). Under some environments, individual super soft lines exhibited HI values as low as HI = –4. The super soft trait was manifested in reduced SKCS kernel texture and higher break flour yields, with some increase in sodium carbonate SRC (solvent retention capacity) values and sponge cake volumes. Straight‐grade flour yield, flour ash, milling score, and cookie diameter were largely unaffected. With the possible exception of the sodium carbonate SRC values, we observed no indication that the super soft trait conferred any negative aspects to commercial soft wheat quality. As such, the super soft trait may provide wheat breeders with new opportunities to modify the end‐use quality of wheat.     

Functional and Nutritional Characteristics of Soft Wheat Grown in No‐Till and Conventional Cropping Systems

The effects of no‐till versus conventional farming practices were evaluated on soft wheat functional and nutritional characteristics, including kernel physical properties, whole wheat composition, antioxidant activity, and end‐product quality. Soft white winter wheat cultivar ORCF 102 was evaluated over a two‐year period from three long‐term replicated no‐till versus conventional tillage studies in Oregon. Wheat from the no‐till cropping systems generally had greater test weight, kernel diameter, and kernel weight and had softer kernels compared with wheat from the conventional tillage systems. Compared with the conventional systems, no‐till whole wheat flour had lower protein and SDS sedimentation volume. Ash content as well as most minerals measured (calcium, copper, iron, magnesium, and zinc), except for manganese and phosphorus, were generally slightly lower in no‐till than in conventional wheat. Whole wheat flour from the no‐till cropping systems generally had slightly lower total phenolic content and total antioxidant capacity. Milling properties, including flour yield, break flour yield, and mill score, were not affected by tillage systems. Refined flour from no‐till systems had lower protein, SDS sedimentation volume, and lactic acid and sucrose solvent retention capacities compared with flour from conventional tillage. No‐till wheat generally had greater sugar‐snap cookie diameter than conventionally tilled wheat. In conclusion, no‐till soft white winter wheat generally had slightly reduced nutritional properties (protein, ash, most minerals, and total antioxidant content) compared with wheat from conventionally tilled systems, and it had equivalent or sometimes superior functional properties for baking cookie‐type products.     

Functional and Nutritional Characteristics of Wheat Grown in Organic and Conventional Cropping Systems

The effects of organic versus conventional farming practices on wheat functional and nutritional characteristics were compared. Soft white winter wheat and hard red spring wheat were obtained from multiyear replicated field plots near Pullman, Washington, and Bozeman, Montana. Test weight, kernel weight, and kernel diameter tended to be greater in both soft and hard organic wheat than in conventional wheat in the Pullman studies. Phenolic content and total antioxidant capacity tended to be lower in organic than in conventional wheat. Flour ash, P, and Mg contents in whole wheat flour varied in parallel among cropping systems, but levels were not consistently associated with either organic or conventional cropping systems. Protein contents of whole wheat and refined flours were similar in organic and conventional wheat from Pullman when fertility levels were similar. Higher fertility was associated with higher protein content in both organic and conventional cropping systems. Soft wheat flour from a low‐fertility organic cropping system had lower sodium carbonate, lactic acid, and sucrose solvent retention capacities, lower protein content, and greater cookie diameter and cake volume than soft wheat flour from the higher fertility organic and conventional cropping systems; the change in end‐product quality was significant in one out of two crop years. In the Bozeman hard wheat studies, higher fertility in both organic and conventional cropping systems tended to increase protein content and bread loaf volume. Results indicated that neither organic nor conventional cropping systems were associated with substantially improved mineral and antioxidant nutritional properties, and end‐use quality of wheat was more strongly associated with fertility level than with organic versus conventional cropping systems.     

A Comprehensive Survey of Soft Wheat Grain Quality in U.S. Germplasm

Wheat (Triticum aestivum L.) quality is dependent upon both genetic and environmental factors, which work in concert to produce specific grain, milling, flour, and baking characteristics. This study surveyed all of the 132 soft wheat varieties (cultivars and advanced breeding lines) grown in the U.S. regional nursery system, which encompassed the three main soft wheat producing regions of the United States (eastern and southern soft red winter and western soft white). The quality parameters included test weight, kernel hardness, weight, and diameter, wheat and flour protein, polyphenol oxidase, break flour yield, flour yield, flour ash, milling score, flour swelling volume, flour SDS sedimentation volume, solvent retention capacity (SRC) for water, sodium carbonate, sucrose, and lactic acid, Rapid Visco Analyzer peak pasting viscosity, and cookie diameter. High levels of variation were observed among varieties, regions, and specific environments, with environment being in general a much greater source of variation than varieties. Variety was observed to have a relatively stronger influence on wheat quality in the western nurseries, compared with the eastern and southern regions, where location effects had a stronger impact on overall wheat quality. The greater influence of variety was particularly notable for kernel hardness in the western nurseries. Kernel hardness also varied considerably as a result of environment. For the two soft red winter wheat nurseries, the western U.S. environment produced substantially harder kernels (37–40) compared with the same varieties grown in eastern U.S. locations (15–20). Intertrait quality relationships were observed to be unique to the specific nursery and germplasm in which they were studied, and these relationships were not consistent across nurseries. Nevertheless, on average, soft wheat quality was fairly similar across the United States, indicating that breeding and testing models have been successful in achieving a relatively uniform target for quality. However, many traits showed high levels of variability among varieties, suggesting that a greater level of selection for end‐use quality would benefit end users by increasing consistency and reducing variability. The often large role of environment (location) in quality indicates that end users must be assiduous in their origination and grain procurement. Clearly, “nursery mean” quality does not reflect the potential that can be obtained, as reflected by a few exceptional soft wheat varieties.     

Influence of Kernel Size and Shriveling on Soft Wheat Milling and Baking Quality

Small kernels of soft wheat are sometimes considered to be harder than larger kernels and to have inferior milling and baking characteristics. This study distinguished between kernel size and kernel shriveling. Nine cultivars were separated into large, medium, and small kernels that had no shriveling. Eleven cultivars were separated into sound, moderate, and severely shriveled kernels. Shriveling greatly decreased the amount of flour produced during milling. It adversely affected all other milling quality characteristics (ash content, endosperm separation index, and friability). Shriveled kernels produced flour that had inferior soft wheat baking qualities (smaller cookie diameter and higher alkaline water retention capacity). In contrast, test weight and milling qualities were independent of kernel size. Small, nonshriveled kernels had slightly better baking quality (larger cookie diameter) than larger nonshriveled kernels. Small kernels were softer than large kernels (measured by break flour yield, particle size index, and flour particle size). Small nonshriveled kernels did not have diminished total flour yield potential or other reduced flour milling characteristics. Those observations suggest a possibility of separating small sound kernels from small shriveled kernels to improve flour yield and the need to improve dockage testing estimation techniques to distinguish between small shriveled and small nonshriveled kernels.     

Relationship of Bread Quality to Kernel,Flour, and Dough Properties

This study measured the relationship between bread quality and 49 hard red spring (HRS) or 48 hard red winter (HRW) grain, flour, and dough quality characteristics. The estimated bread quality attributes included loaf volume, bake mix time, bake water absorption, and crumb grain score. The best‐fit models for loaf volume, bake mix time, and water absorption had R² values of 0.78–0.93 with five to eight variables. Crumb grain score was not well estimated, and had R² values ≈0.60. For loaf volume models, grain or flour protein content was the most important parameter included. Bake water absorption was best estimated when using mixograph water absorption, and flour or grain protein content. Bake water absorption models could generally be improved by including farinograph, mixograph, or alveograph measurements. Bake mix time was estimated best when using mixograph mix time, and models could be improved by including glutenin data. When the data set was divided into calibration and prediction sets, the loaf volume and bake mix time models still looked promising for screening samples. When including only variables that could be rapidly measured (protein content, test weight, single kernel moisture content, single kernel diameter, single kernel hardness, bulk moisture content, and dark hard and vitreous kernels), only loaf volume could be predicted with accuracies adequate for screening samples.     

Effect of Dark,Hard, and Vitreous Kernel Content on Protein Molecular Weight Distribution and on Milling and Breadmaking Quality Characteristics for Hard Spring Wheat Samples from Diverse Growing Regions

Kernel vitreousness is an important grading characteristic for segregation of subclasses of hard red spring (HRS) wheat in the United States. This research investigated the protein molecular weight distribution (MWD) and the flour and baking quality characteristics of different HRS wheat market subclasses. The U.S. regional crop quality survey samples obtained from six regions for three consecutive growing years were used for subclass segregation based on the dark, hard, and vitreous (DHV) kernel percentage. Flour milled from HRS wheat with greater percentages of DHV kernel showed higher water absorption capacity for breadmaking. Protein MWD parameters could be related to the association between DHV kernel level and water absorption. Specifically, flour protein fractions rich in gliadins and high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction were identified to have significant and positive correlations with both DHV kernels and flour water absorption levels. An example further showed the importance of flour water absorption on potential economic incentives that can be gained with having a greater percentage of vitreous kernels. This information could help the flour milling and baking industry to segregate the different subclasses of HRS wheat with varying DHV content for their intended end‐use applications.     

Comparison of Quality Characteristics and Breadmaking Functionality of Hard Red Winter and Hard Red Spring Wheat

Various whole‐kernel, milling, flour, dough, and breadmaking quality parameters were compared between hard red winter (HRW) and hard red spring (HRS) wheat. From the 50 quality parameters evaluated, values of only nine quality characteristics were found to be similar for both classes. These were test weight, grain moisture content, kernel size, polyphenol oxidase content, average gluten index, insoluble polymeric protein (%), free nonpolar lipids, loaf volume potential, and mixograph tolerance. Some of the quality characteristics that had significantly higher levels in HRS than in HRW wheat samples included grain protein content, grain hardness, most milling and flour quality measurements, most dough physicochemical properties, and most baking characteristics. When HRW and HRS wheat samples were grouped to be within the same wheat protein content range (11.4–15.8%), the average value of many grain and breadmaking quality characteristics were similar for both wheat classes but significant differences still existed. Values that were higher for HRW wheat flour were color b*, free polar lipids content, falling number, and farinograph tolerance. Values that were higher for HRS wheat flour were geometric mean diameter, quantity of insoluble polymeric proteins and gliadins, mixograph mix time, alveograph configuration ratio, dough weight, crumb grain score, and SDS sedimentation volume. This research showed that the grain and flour quality of HRS wheat generally exceeds that of HRW wheat whether or not samples are grouped to include a similar protein content range.     

Assessing Environmental Influences on Solvent Retention Capacities of Two Soft White Spring Wheat Cultivars

The solvent retention capacity test (SRC) (AACC Approved Method 56‐11) of flour is used to evaluate multiple aspects of wheat (Triticum aestivum L.) quality including pentosan content, starch damage, gluten strength, and general water retention based on the ability of flour to retain a range of solvents. The objectives of this study were to evaluate the effects of grain production environment in general and crop irrigation and fertility management in particular on SRC of soft wheat flour, and to evaluate the ability of SRC to predict end‐use quality across diverse environments. Two soft white spring wheat cultivars ‘Pomerelle’ and ‘Centennial’ were produced in a range of irrigated and rain‐fed production environments. SRC profiles and milling and baking quality parameters were measured. In a two‐year study at Aberdeen, ID, with two late‐season irrigation management regimes and two crop nitrogen fertility treatments, only wheat genotype significantly affected flour SRC. In two‐year studies at Tetonia, ID, one conducted under rain‐fed conditions and the other under irrigation, additional fertilizer applied at anthesis did not affect SRC. Correlations among quality parameters were determined using the Aberdeen and Tetonia flour samples, as well as samples of the same genotypes grown in fertility trials under rain‐fed conditions at Havre and Bozeman, MT, and under irrigation at Bozeman. Patterns of correlations among SRC values were similar for both genotypes. Grain test weight was negatively correlated with sodium carbonate and sucrose SRC of both genotypes. Flour protein was strongly positively correlated with sucrose and lactic acid SRC of both genotypes. The optimal regression models for predicting sugar snap cookie diameter (AACC Approved Method 10‐52) as a function of protein, SRC, flour extraction, and kernel hardness were different for the two cultivars. SRC evaluations of flours from these trials were consistent with large genotype and environment effects, yet minimal genotype × environment interaction. This suggests that selection among genotypes within an environment will produce a gain‐from‐selection observable in multiple and diverse environments.     

Effects of Kernel Vitreousness and Protein Level on Protein Molecular Weight Distribution,Milling Quality,and Breadmaking Quality in Hard Red Spring Wheat

Dark, hard, and vitreous kernel content is an important grading characteristic for hard red spring (HRS) wheat in the United States. This research investigated the associations of kernel vitreousness (KV) and protein content (PC) levels with protein molecular weight distribution (MWD), milling quality, and breadmaking quality characteristics of HRS wheat. The U.S. regional crop quality survey samples from three consecutive growing years were combined into three composite samples with different levels of wheat PC and then further segregated into separate samples with three different levels of KV. Analysis of variance showed that KV level had significant (P < 0.001) effect on variation in test weight, break flour yield, and damaged starch content. Among protein MWD parameters analyzed by size‐exclusion HPLC, the high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction had significant (P < 0.01) association with KV. Regression analysis indicated that addition of KV to the PC level improved the model for both farinograph and baking water absorption values in all three growing years. This information could help the flour milling and baking industries to further segregate HRS wheat based on KV levels in addition to PC levels for their intended end‐use applications.     

Relationships Among Grain Hardness,Pentosan Fractions,and End‐Use Quality of Wheat

Grain texture (hardness) in wheat (Triticum aestivum L.) is a major determinant of end‐usage. Variation in grain texture can be conceptually assigned to the two major hardness classes that result from the action of one major gene (Hardness) or to as‐yet undetermined factors contributing to residual variation within hardness classes. Identifying the physicochemical basis of both sources of texture variation could provide a means of better controlling or manipulating this quality trait. Pursuant to this objective, the role of pentosans was examined. Pentosan fractions (membrane‐associated, total, and soluble) were isolated from 13 hard and 13 soft wheat samples and their flours. Among the hard wheat samples, pentosans had a minimal role in modifying grain hardness. However, among the soft wheat samples, pentosans appeared to have a significant hardness‐modifying effect that carried over into end‐use quality. Among the soft wheat samples, pentosan fractions, along with wheat protein, accounted for 53–76% of the variation in grain texture, depending on the method used to quantify texture. Membrane‐associated pentosans were the most influential single parameter in modeling grain texture for the soft wheat samples. Membrane‐associated pentosans were most influential in accounting for variation (69%) in alkaline water retention capacity. Total pentosans, together with flour protein, accounted for 87% of the variation in cookie diameter for soft wheat samples, with the total pentosan fraction being the more influential.     

Protein Quality of Wheat Desirable for Making Fresh White Salted Noodles and Its Influences on Processing and Texture of Noodles

Protein characteristics of wheat flours from various wheat classes, and of commercial flours for making noodles, were evaluated to determine the effects of protein content and quality on processing and textural properties of white salted noodles, as well as to identify protein quality required for making white salted noodles. SDS sedimentation volume based on constant protein weight, mixograph mixing time, and proportions of salt‐ and alcohol‐soluble protein of three commercial flours for making noodles were more similar to those of hard wheat than to soft wheat flours. SDS sedimentation volume of commercial flours for making noodles based on constant protein weight ranged from 38.5 to 40.0 mL and was higher than those of most soft wheat flours. Mixograph mixing time and proportion of salt‐soluble protein of hard and commercial flours for making noodles were >145 sec and mostly <13.8%, respectively, while those of club and soft wheat flours were < 95 sec and >15.0%. Both protein content and protein quality, as determined by SDS sedimentation volume based on constant protein weight, mixograph mixing time, proportion of salt‐soluble protein, and score of HMW‐GS compositions correlated with optimum water absorption of noodle dough and hardness of cooked white salted noodles.     

Comparative Effects of 1BL/1RS Translocation in Relation to Protein Composition and Milling and Baking Quality of Soft Red Winter Wheat

Forty grain samples, derived from six soft red winter wheat lines with 1BL/1RS and four genotypes without the translocation, grown in four diverse environments, were used to assess test weight, flour yield, protein content of grain and flour, rheological properties, and end-use characteristics in cakes and cookies. Wheat lines with 1BL/1RS had similar or higher mean test weights than lines without the translocation. Mean flour yields were similar for the two groups. Test weight was not predictive of flour yield. Mean values for grain moisture, grain protein, and rheological properties, as measured by farinograph for mixing time stability and mixing tolerance index, were similar for wheat lines with and without 1BL/1RS. In several cases, flour from lines with 1BL/1RS produced dough with greater mixing tolerance and cakes with higher volume and softer texture than did check lines without the translocation. However, the translocation in these soft red winter wheat lines resulted in higher farinograph water absorption by the flour and decreased cookie spread. The results of this study were novel in that end-use, specifically baking quality of soft wheat lines with 1BL/1RS, varied dramatically depending on whether cookies or cakes were evaluated. Therefore, use of single-product baking tests may lead to false conclusions regarding end-use quality of 1BL/1RS soft wheat. Direct comparison between a pair of sister lines with and without 1BL/1RS indicated that the translocation had adverse effects on quality as exemplified by lower flour yield, greater farinograph water absorption, and reduced cookie diameter. However, the 1BL/1RS line had greater mixing tolerance and similar cake volume and texture scores in comparison to its sister line. In summary, 1BL/1RS lines were identified in which quality characteristics exceeded those of control cultivars and commercial flours. Genetic background and environmental factors probably affected milling and baking quality to a greater extent than the translocation. Many of the negative quality attributes previously associated with 1BL/1RS are probably due to genetic background effects and, therefore, could be greatly diminished with improvement of the genetic background in which the translocation resides.     

Effect of Kernel Size and Mill Type on Protein,Milling Yield,and Baking Quality of Hard Red Spring Wheat

Optimization of flour yield and quality is important in the milling industry. The objective of this study was to determine the effect of kernel size and mill type on flour yield and end‐use quality. A hard red spring wheat composite sample was segregated, based on kernel size, into large, medium, and small kernels, as well as unsorted kernels. The four fractions were milled in three roller mills: Brabender Quadrumat Jr., Quadrumat Sr., and Bühler MLU‐202 laboratory mills. Large kernels had consistently higher flour yield than small kernels across mills, with the Quadrumat Jr. mill showing the lowest flour yield. Mill type and kernel size significantly affected variation in flour protein molecular weight distribution. When compared with larger kernels, flour milled from the small‐kernel fraction contained a higher gliadin fraction and SDS‐unextractable high‐molecular‐weight polymeric proteins, which had positive correlations with bread loaf volume (r = 0.61, P < 0.05) and mixograph peak time (r = 0.84, P < 0.001). Overall, small kernels could contribute to enhancing flour breadmaking quality while having a detrimental effect on milling yield.     

Gluten,Pasting, and Mixograph Parameters of Hard Winter Wheat Flours in Relation to Breadmaking

Flour gluten, pasting, and mixogram characteristics of 12 hard winter wheat cultivars grown in six counties in Kansas were analyzed using the Glutomatic System, a Rapid Visco-Analyser, and MIXSMART computer software, respectively, to investigate their relationships with breadmaking. Gluten contents and hydration amounts had significant correlations with water absorption. In addition, gluten parameters were significantly correlated to kernel hardness. One of the most difficult challenges in mixograph usage is to find the optimum water absorption of a given flour. Flour protein contents (FP) and near-infrared hardness scores or FP and gluten parameters could predict mixograph water absorptions, showing R² values of 0.842 or 0.814, respectively, by multiple regression analysis. For our set of 72 wheat samples, computer-analyzed mixograph parameters were significantly correlated to conventional parameters. Computer-analyzed mixograph midline peak times and bandwidths at 6 min were highly correlated to conventional mixograph mix times and mixing tolerances, respectively. Flour pasting temperatures complemented FP in predicting loaf volumes. The ratios of FP to pasting temperatures had a significant curvilinear relationship with loaf volumes showing an R² of 0.725.     

Relationship Between Physicochemical Properties of Wheat Flour,Wheat Protein Composition,and Textural Properties of Cooked Chinese White Salted Noodles

Physicochemical properties and protein composition of 39 selected wheat flour samples were evaluated and correlated with the textural properties of Chinese hard‐bite white salted noodles. Flour samples were analyzed for their protein and wet gluten contents, sedimentation volume, starch pasting properties, and dough mixing properties by farinograph and extensigraph. Molecular weight distribution of wheat flour proteins was determined with size‐exclusion (SE) HPLC, SDS‐PAGE, and acid‐PAGE. Textural properties of Chinese hard‐bite white salted noodles were determined through texture profile analysis (TPA). Hardness, springiness, gumminess, and chewiness of cooked noodles were found to be related to the dough mixing properties. Both protein content and protein composition were found to be related to TPA parameters of noodles. The amount of total flour protein was positively correlated to hardness, gumminess, and chewiness of noodles. The absolute amounts of different peak proteins obtained from SE‐HPLC data showed positive correlations with the hardness, gumminess, chewiness, and springiness of noodles. The proportions of these peak proteins were, however, not significantly related to texture parameters. The proportions of low‐molecular‐weight glutenins/gliadins and albumins/globulins, as observed from SDS‐PAGE, were correlated positively and negatively, respectively, to the hardness, gumminess, and chewiness of cooked noodles. Among the alcohol‐soluble proteins (from acid‐PAGE data), β‐gliadins showed strong correlations with the texture properties of cooked noodles. For the selected flour samples, the total protein content of flour had a stronger relationship with the noodle texture properties than did the relative proportion of different protein subgroups. Prediction equations were developed for TPA parameters of cooked noodles with SE‐HPLC and rapid visco analysis data of the 30 flour samples, and it was found that about 75% of the variability in noodle hardness, gumminess, and chewiness values could be explained by protein composition and flour pasting properties combined together. About 50% of the variations in cohesiveness and springiness were accounted for by these prediction equations.     

Qualitative Effect of Added Gluten on Dough Properties and Quality of Chinese Steamed Bread

Glutens isolated from 15 soft red winter (SRW) wheat flours were added into a SRW wheat flour to obtain protein levels of 9.6 and 11.3% for determination of the qualitative effect of added gluten on the dough properties and quality of northern‐style Chinese steamed bread (CSB). Sodium dodecyl sulfate sedimentation (SDSS) volume of the gluten source flour exhibited positive relationships with mixograph absorption, midline peak time (MPT), and midline peak value (MPV) of the gluten‐added flours and with surface smoothness, crumb structure, and total score of CSB prepared from the gluten‐added flours regardless of protein content. Positive correlations were also observed between SDSS volume of the gluten source flour and specific volume and stress relaxation score of CSB prepared from the gluten‐added flours of 11.3% protein. The increase in protein content from 9.6 to 11.3% by gluten addition raised mixograph absorption, MPT, and MPV but had no apparent effect on resistance breakdown, dough maximum force for extension, and extensibility, and it increased CSB specific volume and crumb structure score without affecting surface smoothness, stress relaxation, and total score. Mixograph parameters exhibited significant relationships with CSB total score, indicating that they could be effective predictors of the CSB‐making quality of flours.