肉用西门塔尔牛与和牛杂交群体的肉品质分析

本研究旨在对肉用西门塔尔牛与杂交和牛两试验群体进行肉质性状比较,以期为肉品质性状遗传机制剖析及优质肉牛培育提供理论指导。收集肉用西门塔尔牛与杂交和牛两试验群体肉质性状表型数据,包括眼肌面积、剪切力、系水力、pH、肉色、脂肪颜色和大理石花纹等指标,进行相关性及差异性分析,从而综合评价两群体的肉品质。结果显示,两群体的脂肪颜色、系水力及剪切力呈现两两正相关;肉色与脂肪颜色、pH呈正相关,且肉色与pH呈显著相关（P < 0.05）,而系水力与pH、肉色和大理石花纹呈负相关。在两试验群体间,和牛杂交群体的大理石花纹、眼肌面积、pH性状表现为极显著优于肉用西门塔尔牛（P < 0.01）。从性别比较来看,肉用西门塔尔牛母牛在大理石花纹、pH、剪切力等性状上极显著或显著优于公牛（P < 0.01;P < 0.05）;而和牛杂交群体母牛的肉色和剪切力性状表现为显著或极显著高于公牛（P < 0.05;P < 0.01）。总体而言,和牛杂交群体的肉质性能优于肉用西门塔尔牛;群体内比较表明,肉用西门塔尔牛群体母牛肉质性能优于公牛,而和牛杂交群体母牛肉质性能低于公牛。     

Effect of carcass price fluctuations on genetic and economic evaluation of carcass traits in Japanese Black cattle

The objectives of this study were 1) to investigate the effect of changes in carcass market prices due to bovine spongiform encephalopathy (BSE) occurrences on estimates of genetic parameters and economic weights for carcass traits; and 2) to compare direct and indirect approaches for prediction of genetic merit of Japanese Black cattle for profitability of their progeny. The direct approach utilized estimated breeding values of carcass prices, whereas in the indirect approach, selection indices were constructed as products of economic weights and breeding values of component traits. Data were composed of 80,191 carcass records divided into 5 periods based on changes in carcass prices as a result of occurrences of BSE in Japan and the United States. The periods ranged from a period before occurrence of BSE in Japan to a period of beef import restrictions and a rise in prices. Carcass traits analyzed included HCW, LM area, rib thickness, subcutaneous fat thickness, and marbling score (MS). Price traits included carcass unit price and carcass sale price. Estimates of heritability for price traits were moderate (0.32 to 0.46) and slightly sensitive to changes in carcass market prices. Genetic correlations of HCW and LM area with price traits increased and that between MS and carcass sale price decreased with period, whereas estimates of genetic correlation between MS and carcass unit price were high in all periods (0.96 to 0.98). Economic weights for carcass traits varied with periods because carcass prices were highly sensitive to economic importance of traits. Nevertheless, correlations between within-period breeding values for price traits estimated using direct and indirect approaches were high (0.92 to 0.99). This result indicates that selection realized by direct and indirect approaches will provide very similar results. A comparison among within-approach breeding values estimated in different periods showed that the largest differences in breeding values of sires for price traits were between the periods after occurrences of BSE in Japan and in the United States. Economic effects of BSE occurrences influenced the importance of carcass traits and economic merits of price traits through a change of carcass prices from period to period, irrespective of the approach taken in determining the genetic merit of breeding animals for profitability of their progeny.     

Adjusting for heterogeneity of variance for carcass traits affects single and multiple trait selections in genetic evaluation of Japanese Black cattle

Heterogeneity of variance among subclasses of an effect is a potential source of bias in genetic evaluation. Degrees of the heterogeneity of variance among farm‐market‐year‐sex (FMYS) subclasses for carcass weight, beef marbling standard number, rib‐eye area, rib thickness and subcutaneous fat thickness were investigated in Japanese Black cattle. Consequences of adjusting for the heterogeneity on the predicted breeding values (PBVs) or on the genetic indexes derived from the PBVs of the five carcass traits were assessed. A total of 57 461 records were collected between 1997 and 2002 from steers and heifers fattened at farms across Japan. These records were grouped into 1591 FMYS subclasses. Bartlett's test showed that the degree of the heterogeneity of variance among the FMYS subclasses was sizeable in all traits (P < 0.0001). By applying a two‐step adjustment procedure it was possible to reduce the standard deviation, the coefficient of variation and the Gini coefficient of the phenotypic variances by 67.5% to 75.0% in the different traits. The applied adjustment caused a substantial re‐ranking of elite dams in the PBV for each trait as well as in the genetic index. This study provided evidence that the applied adjustment reduces the bias in the PBVs due to heterogeneous variances and increases the accuracy of bull‐dam selection.     

Genetic variability of Wagyu cattle estimated by statistical approaches

The genetic evaluation of economically important traits utilizes estimates of genetic variability, which are represented by heritability. This review summarizes the published heritabilities of traits estimated in Wagyu cattle. Two different mean heritabilities, unweighted and weighted by standard errors, were calculated. In Japanese Black cattle, the average unweighted and weighted direct heritabilities of birth weight were 0.35 and 0.28, respectively, whereas the respective maternal heritabilities were 0.17 and 0.07. The mean unweighted heritability of calf market weight was estimated to be 0.30 in Japanese Black cattle. The mean unweighted heritability of daily gain during performance testing was 0.29 in Japanese Black and 0.40 in Japanese Shorthorn cattle. In Japanese Black cattle, the unweighted mean heritability was 0.48 for carcass weight, 0.46 for rib‐eye area, 0.38 for rib thickness, 0.39 for subcutaneous fat thickness, and 0.55 for marbling. The mean weighted heritability of the calving interval was low, and estimated to be 0.05. In general, the heritabilities estimated in Wagyu cattle were similar to those estimated in other beef breeds.     

Genetic and economic evaluation of Japanese Black (Wagyu) cattle breeding schemes

Deterministic simulation was used to evaluate 10 breeding schemes for genetic gain and profitability and in the context of maximizing returns from investment in Japanese Black cattle breeding. A breeding objective that integrated the cow-calf and feedlot segments was considered. Ten breeding schemes that differed in the records available for use as selection criteria were defined. The schemes ranged from one that used carcass traits currently available to Japanese Black cattle breeders (Scheme 1) to one that also included linear measurements and male and female reproduction traits (Scheme 10). The latter scheme represented the highest level of performance recording. In all breeding schemes, sires were chosen from the proportion selected during the first selection stage (performance testing), modeling a two-stage selection process. The effect on genetic gain and profitability of varying test capacity and number of progeny per sire and of ultrasound scanning of live animals was examined for all breeding schemes. Breeding schemes that selected young bulls during performance testing based on additional individual traits and information on carcass traits from their relatives generated additional genetic gain and profitability. Increasing test capacity resulted in an increase in genetic gain in all schemes. Profitability was optimal in Scheme 2 (a scheme similar to Scheme 1, but selection of young bulls also was based on information on carcass traits from their relatives) to 10 when 900 to 1,000 places were available for performance testing. Similarly, as the number of progeny used in the selection of sires increased, genetic gain first increased sharply and then gradually in all schemes. Profit was optimal across all breeding schemes when sires were selected based on information from 150 to 200 progeny. Additional genetic gain and profitability were generated in each breeding scheme with ultrasound scanning of live animals for carcass traits. Ultrasound scanning of live animals was more important than the addition of any other traits in the selection criteria. These results may be used to provide guidance to Japanese Black cattle breeders.     

Genomic imprinting variances of beef carcass traits and physiochemical characteristics in Japanese Black cattle

The objective of this study was to estimate variance components related to imprinting for carcass traits and physiochemical characteristics in Japanese Black cattle. The carcass records obtained from 4,220 Japanese Black feedlot cattle included carcass weight (CW), rib eye area (REA), rib thickness, subcutaneous fat thickness, and beef marbling score (BMS), and the physiochemical characteristics were fat, moisture, glycogen per proportion of moisture content, oleic acid, and monounsaturated fatty acids (MUFA). To detect gametic effects, an imprinting model was fitted. High additive heritabilities were estimated for all traits (from 0.516 for glycogen to 0.853 for fat) and were reduced in Mendelian heritability. The range of the differences was from 0.002 (CW) to 0.331 (fat and moisture), and the reductions were due to their imprinting variances. The ratio of the imprinting variance to the total additive genetic variance for REA (0.374), BMS (0.291), fat (0.387), moisture (0.388), and MUFA (0.337) were large (p < 0.05). These imprinting variances were due to the maternal contribution and suggested the existence of maternally expressed genomic imprinting effects on the traits in Japanese Black cattle. Therefore, maternal gametic effects should be considered in breeding programs for Japanese Black cattle.     

Relationship of the bovine growth hormone gene to carcass traits in Japanese black cattle.

The bovine growth hormone gene (bGH) possesses three haplotypes, A, B and C, that differ by amino acid mutations at positions 127 and 172 in the fifth exon: (leucine 127, threonine 172), (valine 127, threonine 172) and (valine 127, methionine 172) respectively. The correlation between meat quality or carcass weight and these haplotypes was investigated in Japanese black cattle. Altogether, 940 bGH haplotypes were compared with respect to six carcass traits: carcass weight, longissimus muscle area, rib thickness, subcutaneous fat thickness, beef marbling score and beef colour. The frequency of the B haplotype was higher (0.421) than that of A (0.269) and C (0.311). High carcass weight and low beef marbling were associated with haplotype A (p < 0.05 and p < 0.01 respectively), whereas beef marbling was increased by haplotype C (p < 0.05). Estimated regression coefficient of the A haplotype substitution effect for carcass weight and beef marbling score were 5.55 (13.1% of the phenotypic SD) and -0.31 (17.0%) respectively. That of the C haplotype for beef marbling score was 0.20 (11.0%). The other traits showed no relationship to the haplotypes examined. The results of this investigation suggest that information pertaining to bGH polymorphisms in Japanese black cattle could be used to improve the selection of meat traits.     

Estimation of direct and maternal genetic parameters for growth and carcass traits in a herd of Japanese Black cattle in Miyagi prefecture, using a multitrait animal model

Data from 1170 records of fattening calves were collected on growth and carcass traits from a Japanese Black cattle herd located in Miyagi prefecture, Japan. The objective was to determine direct and maternal heritabilities, direct and maternal genetic correlations and phenotypic correlations between bodyweight at the beginning of the fattening period (BWS), bodyweight at the end of the fattening period (BWF), carcass weight (CW), average daily gain during the fattening period (ADG), rib eye area (REA), rib thickness, subcutaneous backfat thickness (SFT), yield estimate (YE) and beef marbling score (BMS). Direct heritability estimates of 0.16 (SFT) and 0.07 (BMS) were low, whereas estimates of the other traits were medium to high and ranged between 0.44 (REA) and 0.78 (CW). Direct genetic correlations were all positive, except those that were between BWS and SFT, and between BWS and YE (?0.49 and ?0.14, respectively). The lowest positive genetic correlation was between BWS and BMS (0.04) and the highest was between BWF and CW (0.99). The phenotypic correlation coefficients ranged between ?0.41 (between SFT and YE) and 0.96 (between BWF and CW). Maternal heritability estimates were generally low and ranged between 0.00 for BMS and 0.08 for BWS, CW and ADG. Selection programs comprising information on growth and carcass traits of calves and maternal traits of dams were suggested.     

Evaluation of performance characteristics in a diallel among Simmental, Limousin, Polled Hereford and Brahman beef cattle. II. Carcass traits

Evaluations of steer and heifer progeny from a diallel mating design of Simmental, Limousin, Polled Hereford and Brahman beef cattle over 5 yr are presented. Traits evaluated included final weight, hot carcass weight, ribeye area, 12th rib fat thickness, marbling score, yield grade, dressing percentage and percentage of kidney, pelvic and heart fat. Progeny of Simmental sires were heavier at slaughter than those with Brahman sires (P less than .05), but no differences were found for carcass weight. Dressing percentage was higher for Limousin crosses compared with progeny of other sire breeds (P less than .05). Similar results were found for dam breeds, except that progeny of Limousin dams had heavier carcasses with a higher dressing percentage (P less than .05) than Brahman crosses. Crosses of Limousin and Simmental had larger ribeye areas (P less than .05) compared with calves of the other breeds. Progeny of Polled Hereford dams had higher marbling scores and were fatter than progeny of dams of other breeds (P less than .05). Heterosis estimates were significant for all Brahman crosses for final weight, carcass weight and ribeye area, but these contrasts were negligible for other traits. Estimates of general combining ability were positive and significant for Simmental for final weight, carcass weight, ribeye area and marbling score and were significant and negative for Limousin for final weight, fat thickness and yield grade. Maternal values were generally small.     

Genetic parameters for carcass traits of field progeny and their relationships with feed efficiency traits of their sire population for Japanese Black cattle

Genetic parameters for carcass traits of 1774 field progeny (1281 steers and 493 heifers), and their genetic relationships with feed efficiency traits of their sire population (740 bulls) were estimated with REML. Feed efficiency traits included feed conversion ratio (FCR) and residual feed intake (RFI). RFI was calculated by the residual of phenotypic (RFI_phe) and genetic (RFI_gen) regression from the multivariate analysis of feed intake on metabolic weight and daily gain. Progeny traits were carcass weight (CWT), rib eye area (REA), rib thickness (RBT), subcutaneous fat, yield estimate (YEM), marbling score (MSR), meat quality grade, meat color, fat color, meat firmness and meat texture. The estimated heritability for CWT (0.70) was high and heritabilities for all the other traits were moderate (ranged from 0.32 to 0.47), except for meat and fat color and meat texture which were low (ranged from 0.02 to 0.25). The high genetic correlation (0.62) between YEM and MSR suggests that simultaneous improvement of high carcass yield and beef marbling is possible. Estimated genetic correlations of RFI (RFI_phe and RFI_gen) of sires with CWT (− 0.60 and − 0.53) and MSR (− 0.62 and − 0.50) of their progeny were favorably negative indicating that the selection against RFI of sires may have contributed to produce heavier carcass and increase in beef marbling. The correlated responses in CWT, REA and RBT of progeny were higher to selection against RFI than those to selection against FCR of sires. This study provides evidence that selection against RFI is preferred over selection against FCR in sire population for getting better correlated responses in carcass traits of their progeny.     

Effects of parent‐of‐origin models with different pedigree information on beef carcass traits and fatty acid composition in Japanese Black cattle

Genomic imprinting should be considered in animal breeding systems to avoid lead in bias in genetic parameter estimation. The objective of this study was to clarify the effects of pedigree information on imprinting variances for carcass traits and fatty acid composition in Japanese Black cattle. Carcass records [carcass weight, rib eye area, rib thickness (RT), subcutaneous fat thickness and beef marbling score (BMS)] and fatty acid composition were obtained for 11,855 Japanese Black feedlot cattle. To estimate and compare the imprinting variances for the traits, two imprinting models with different pedigree information [the sire–dam gametic relationship matrix (Model 1) and the sire–maternal grandsire (MGS) numerator relationship matrix (Model 2)] were fitted. The ratio of the imprinting variance to the total additive genetic variance for RT (6.33%) and BMS (19.00%) was significant in Model 1, but only that for BMS (21.09%) was significant in Model 2. This study revealed that fitting the sire–MGS model could be useful in estimating imprinting variance under certain conditions, such as when restricted pedigree information is available. Furthermore, the present result suggested that the maternal gametic effects on BMS should be included in breeding programmes for Japanese Black cattle to avoid selection bias caused by imprinting effects.     

Genetic relationships between temperament of calves at auction and carcass traits in Japanese Black cattle

Correlations of calves’ temperament with carcass traits were estimated to clarify the genetic relationships between them in Japanese Black cattle. The temperament records for 3128 calves during auction at a calf market were scored on a scale of 1 (calm) to 5 (nervous) as temperament score (TS ), and the TS were divided into two groups (TSG ): TS 1 and 2 comprised TSG 1, and 3 to 5 constituted TSG 2. Carcass data were obtained from 33 552 fattened cattle. A threshold animal model was used for analyzing the underlying liability for TSG , whereas a linear one was used for TS and carcass traits. The heritability estimates for TS and TSG were 0.12 and 0.11, respectively. On the other hand, moderate to high heritability estimates were obtained for carcass traits (0.40 to 0.68). The temperament scores were negatively correlated with carcass weight, rib thickness and subcutaneous fat thickness (?0.13 to ?0.59). In contrast, weak to moderate positive correlations were found between the temperament scores and rib eye area or yield estimate (0.16 to 0.45). The temperament scores and beef marbling score had no correlation. These results showed that it is possible to improve temperament and carcass traits simultaneously.     

Development of DNA markers for improvement of meat quality in a Japanese Black cattle population in Hyogo Prefecture

The polymorphisms associated with economic traits in livestock animals provide useful information as genetic indicators for breeding improvement. Over the last two decades, several DNA markers have been developed in Japanese Black cattle; however, the effect of these markers differs across populations due to differences in their genetic structures and backgrounds. As such, there is a need to verify the effectiveness of these markers in each population. This review summarizes the effectiveness of previously reported markers on carcass traits and the development of novel DNA markers in a Japanese Black cattle population in Hyogo Prefecture. As result of genome wide association studies and resequencing analyses, two novel significant markers associated with meat quality-related traits (beef marbling and fatty acid composition) were developed. These findings will lead to the identification of responsible genes and polymorphisms and contribute to the development of novel DNA markers for numerous traits in various cattle populations.     

Genetic analysis of calf market weight and carcass traits in Japanese Black cattle

Heritabilities of and genetic correlations between additive direct and maternal genetic effects for calf market weight, and additive direct genetic effects for carcass traits, were estimated for Japanese Black cattle by REML procedures under 2-trait animal models. Data were collected from calf and carcass markets in Hyogo and Tottori prefectures and analyzed separately by prefecture. Calf market weight was measured on 42,745 and 23,566 calves in Hyogo and Tottori, respectively. Only the fattening animals with calf market weight were extracted from the carcass database and used for estimation. The carcass traits analyzed were carcass weight, ribeye area, rib thickness, subcutaneous fat thickness, yield estimate, beef marbling score, and 4 meat characters (color, brightness, firmness, and texture). Direct and maternal heritabilities for calf market weight were estimated to be 0.22 and 0.07 in Hyogo, and 0.37 and 0.15 in Tottori, respectively. The estimates of heritabilities for carcass traits were moderate to high in both prefectures. The estimates of direct-maternal genetic correlations for calf market weight were positive (0.17) in Hyogo and negative (-0.63) in Tottori. The direct effect for calf market weight was positively correlated with the direct effect for carcass weight (0.87 and 0.56 in Hyogo and Tottori, respectively) but negatively correlated with the direct effect for beef marbling score (-0.10 in both prefectures). The estimates of genetic correlations between the maternal effect for calf market weight and the direct effects for carcass traits varied from -0.13 to 0.34 in Hyogo and from -0.14 to 0.15 in Tottori. Because direct and maternal genetic effects for early growth traits can be evaluated from calf market weight data in the production system of Japanese Black cattle, this information should be incorporated into selection and mating schemes of the breed.     

Estimation of the marbling development pattern in Japanese Black cattle by using serial ultrasound measurement data

The objective of this study was to develop mathematical equations for describing the change in marbling in Japanese Black steers using longitudinal measurements. Serial ultrasound measurements were taken at 14, 16, 20, and 26 months of age and analyzed using an image analysis software. The longitudinal marbling measurements from the ultrasound images and carcasses were fitted into a nonlinear logistic curve. Data used for the analysis consisted of 749 steers that converged in nonlinear curve fitting and showed reasonable estimated parameters of the logistic curves. The average predicted mature beef marbling score (BMS) and maturation rate were 6.26 and 0.353, respectively, and the average maturity levels at 24 months of age were 83.9%. The heritability estimates for the predicted maturity traits were moderate, indicating that these traits may have potential for genetic improvement. There was a negative relationship between the expected progeny differences between carcass BMS and maturity traits, suggesting that genetic improvement by carcass BMS may lead to the selection of bulls with late maturity for marbling. The results indicate that ultrasound and model building for marbling can be useful tools to correctly select candidate bulls with high marbling in the early fattening period.     

Growth traits and composition of two- and three-way-cross intact male progeny of Bos taurus and Bos indicus X Bos taurus dams

Feedlot traits, carcass traits and distribution of commercial cuts of crossbred intact male progeny (n = 556) from young and mature Hereford, Red Poll, Hereford X Red Poll, Red Poll X Hereford, Angus X Hereford, Angus X Charolais, Brahman X Hereford and Brahman X Angus dams were evaluated. First-calf heifers were bred to Red Angus bulls; Santa Gertrudis sires were used for each cow's second and third breeding seasons. Calves from these young dams were slaughtered at 13 mo. Calves of mature dams were all sired by Limousin bulls and slaughtered at 12 mo. Dam breed was a major source of variation in most bull traits. Progeny of Brahman-cross dams were inferior (P less than .01) in daily gain, final weight, carcass weight and in edible cuts/day of age compared with progeny from Bos taurus dams. Intact male progeny of Angus X Charolais dams ranked highest in longissimus area, cutability, and edible cuts/day of age. The range of dam breed means in percentage of steak, roast, bone-in cuts (chuck short ribs and back ribs), short plate and thin cuts, and lean trim was just over 1%. Greater variation among dam breeds existed in fat measurements. Analyses in which Hereford-Red Poll diallel data for young dams and mature dams were combined showed positive maternal heterosis for dressing percentage (P less than .05), carcass weight (P less than .05), carcass weight/day of age (P less than .05), estimated carcass fat (P less than .05), fat thickness (P less than .01) and marbling score (P less than .01). Reciprocal effects were inconsequential. Results illustrate the importance of dam breed-type effects in formulating breeding strategies for commercial beef herds.     

Genetic parameters of serum vitamin A and total cholesterol concentrations and the genetic relationships with carcass traits in an F1 cross between Japanese Black sires and Holstein dams

Blood sample and carcass trait data were collected from 841 and 3,219 fattening animals of an F(1) cross between Japanese Black sires and Holstein dams, respectively. Data on serum vitamin A and total cholesterol concentrations containing 582 to 739 records at 4 stages of beef-fattening production were used to estimate variance components and heritabilities for the 2 traits, based on fattening periods: less than 13 mo of age (stage 1), 14 to 18 mo of age (stage 2), 19 to 21 mo of age (stage 3), and greater than 22 mo of age (stage 4). Furthermore, the genetic correlations of serum vitamin A and total cholesterol concentrations with beef marbling standards, carcass weight, ribeye area, rib thickness, and subcutaneous fat thickness were estimated. The heritability estimates of serum vitamin A concentration were consistently and drastically decreased from 0.37 ± 0.15 to 0.07 ± 0.07 from stages 1 to 4 because of considerable decreases in sire variances, whereas the residual variances remained large and stable throughout all 4 stages. Serum total cholesterol concentration was moderately heritable (approximately 0.35 to 0.64) throughout all 4 stages. The genetic correlations among serum vitamin A concentrations and beef marbling standards were high and negative (-0.94) in stage 4. The genetic correlations between serum vitamin A concentration and carcass weight in stages 3 and 4 were moderate and positive (approximately 0.26 to 0.36). Moderate to high positive genetic correlations between serum vitamin A concentration and subcutaneous fat thickness were obtained throughout the stages (approximately 0.40 to 0.75). Genetic correlations of serum total cholesterol concentration with carcass weight and rib thickness were moderate and positive (approximately 0.29 to 0.46) in stages 2, 3, and 4. These results indicate serum vitamin A and total cholesterol concentrations could be effective physiological indicators for improving carcass traits.     

Comparison of two- and three-way rotational crossing, beef x beef and beef x Brown Swiss composite breed production: postweaning growth and carcass traits

Data collected from steer and bull progeny, fed to a constant final feedlot weight over 11 yr, were used to estimate heterosis in post-weaning feedlot growth and carcass traits in two-way and three-way rotational crossing systems and a breed composite from crossing Hereford, Angus and Charolais breeds. Steer and bull progeny from matings of beef x Brown Swiss-cross sires and dams also were compared with the straight beef breeds and beef crosses. Growth traits evaluated were initial weight on test, 112-d weight, total feedlot average daily gain and total days from initial to final weight. Carcass traits included hot carcass weight, dressing percentage, rib eye area, 12th-rib fat thickness, kidney, pelvic and heart fat, yield grade and marbling score. Heterosis estimates for calves of all crossing systems were significant for initial and 112-d weight and for saving of days in the feedlot, but not for average daily feedlot gain. Heterosis estimates were small and nonsignificant for most carcass traits except for fat traits in specific crosses. Males from Hereford and Angus sires mated to Angus x Hereford dams had higher (P less than .10) backfat than did the parental average. Male progeny from Charolais ranked higher (P less than .10 to P less than .01) than calves from Hereford and Angus sires for most growth traits. Progeny from Charolais sires were more desirable (P less than .10 to P less than .01) for traits related to cutability, but they had less (P less than .05 to P less than .01) marbling than calves of Angus sires.(ABSTRACT TRUNCATED AT 250 WORDS)     

Assessing the association of single nucleotide polymorphisms at the thyroglobulin gene with carcass traits in beef cattle

The objective of this study was to assess the association of SNP in the thyroglobulin gene, including a previously reported marker in current industry use, with marbling score in beef cattle. Three populations, designated GPE6, GPE7, and GPE8, were studied. The GPE6 population sampled breeds that could be used as alternative germplasm sources in beef cattle production, including Wagyu, Swedish Red and White, Friesian, and Norwegian Red. The GPE7 population sampled 7 popular beef cattle breeds used in temperate climates of the United States: Angus, Charolais, Gelbvieh, Hereford, Limousin, Red Angus, and Simmental. The GPE8 population sampled Bos indicus-influenced breeds used in subtropical regions of the country and subtropical and tropical regions of the world, including Beefmaster, Bonsmara, Brangus, and Romosinuano. Evaluation of 6 SNP in the thyroglobulin gene, including 5 newly described variations, showed no association (P > 0.10) with marbling score in these populations, except a tendency (P < 0.10) for an association with the previously described marker in GPE6. Closer examination of the GPE6 data revealed that the source of the tendency was an association (P < 0.02) with marbling in animals of Wagyu inheritance. Animals having Wagyu background and inheriting the TT genotype had a greater marbling score (599 +/- 20) than those inheriting the CC (540 +/- 10) or the CT (541 +/- 11) genotype. No association was detected with any other carcass trait for this marker in the 3 populations. Furthermore, none of the 5 newly described markers in the gene displayed an association with marbling score. The data indicate that markers at the thyroglobulin gene may be a useful predictor of marbling performance for producers raising Wagyu-based cattle. Although associations with marbling score in the remaining populations were not large or significant, the TT genotype had the numerically greatest marbling score in each population.