Changes of decay and termite durabilities of Japanese larch (Larix leptolepis) wood due to high-temperature kiln drying processes

We investigated the effects of high-temperature drying schedules (120°–130°C) on decay and termite feeding of Japanese larch timbers. Thermogravimetric analysis was conducted to investigate changes of the wood components. Decay and termite feeding tests showed that specimens dried under high-temperature schedules were susceptible against a decaying fungus Fomitopsis palustris and attacks from termites Coptotermes formosanus and Reticulitermes speratus. These drying schedules changed chemical components, which were suggested by the thermal analytical result compared to the control sample. The results of this study indicated that the acceleration of termite feeding takes place even under temperatures that are comparatively lower than that used in our previous research in which 170°C steaming treatment was applied to Japanese larch wood. Decay durability against a brown rot fungus also decreased, possibly from production of low molecular weight fragments when hemicellulose decreased during the high-temperature drying processes.     

Effect of microfibril angle on the longitudinal tensile creep behavior of wood

In this report, we undertook studies of the viscoelastic properties of wood from the viewpoint of the fine structure and properties of the constituent materials in the wood cell wall. To measure the mechanical properties of the wood as the behavior of the cell wall, it is required to perform the longitudinal tensile test using a homogeneous specimen. In this study, microtomed specimens of sugi (Cryptomeria japonica D.Don) earlywood were used for the creep test, which were conducted at the fiber saturation point. The substantial creep compliance of the cell wall was simulated using a simplified viscoelastic model consisting of a Voigt element and an independent spring in series. Based on the experimental results, the values of the parameters were optimized. The results were as follows: (1) the longitudinal tensile creep deformation tends to increase with the elapsed time, similar to the bending creep behavior; (2) the magnitude of the longitudinal creep function increases with MFA; and (3) each parameter in the simplified viscoelastic model is markedly affected by the MFA. Based on these results, the mechanism of the longitudinal tensile creep deformation of wood is discussed.     

Effect of moisture content on the longitudinal tensile creep behavior of wood

In our previous report, we investigated the effect of the microfibril angle (MFA) in the middle layer of the secondary wall (S₂) on the longitudinal creep behavior of a thin homogeneous earlywood specimen sugi. In the present study, we investigated the role of moisture on the tensile creep behavior of wood. We discuss the creep behavior of the wood cell wall from the viewpoint of the composite structure of the cell wall and the properties of the constituent materials. A microtomed thin specimen of earlywood of sugi (Cryptomeria japonica D.Don) was used for the longitudinal tensile creep test. Creep tests were conducted at three moisture stages (oven-dry, air-dry, fiber saturation point) over a broad range of MFA. Results showed that the longitudinal tensile creep behavior was highly dependent on both the moisture content and the MFA. With a small MFA, the variation in the creep function among the three moisture states was very small. For a large MFA, the variation in the creep function was larger. At low moisture contents, the magnitude of the creep function was very small, while at high moisture content, it was very large except for the case of specimens with very small MFA. Those results show that the longitudinal tensile creep behavior was directly affected by the fine composite structure and the internal properties of the cell wall constituents.     

泡桐无性系CO20木材性质与利用研究

在四川省资中县集约栽培的试验林内采集了泡桐无性系CO20和泡桐各五株进行了多项试验研究。证实了泡桐无性系CO20的木材纤维长度、微纤丝角和纤维素的相对结晶度优于泡桐;综纤维素、α-纤维素以及木材物理力学的主要性能指标低于泡桐。制浆得率低。浆张物理性能接近或燬过两种相思树木材指标。     

Behavioral and electrophysiological response of sugarcane aphid and imported fire ant to 2,4,6-trimethylpyridine,an alkaloid from the pink-spotted lady beetle

Many predatory coccinellids conflict with hemipteran tending ants, because they both use hemipterans as resources. Lady beetles are important in the ecology of ants and their reciprocal relationship with hemipterans. Volatiles released by lady beetles have diverse biological significance in intraspecific communication, attraction, and aggregation. However, whether the semiochemicals from lady beetles influence the sympatric members, such as aphids and ants, is still obscure. Sugarcane aphids Melanaphis sacchari was closely associated with honeydew collecting ants and coccinellid predators. Herein, we investigated the behavioral and electrophysiological responses of M. sacchari and their attending red imported fire ants, Solenopsis invicta, to an alkaloid, 2,4,6-trimethylpyridine (TMP) from the pink-spotted lady beetle Coleomegilla maculata. The response of C. maculata to this alkaloid was also evaluated. The results showed that TMP elicited significant electroantennogram (EAG) responses in M. sacchari, S. invicta, and C. maculata. In addition, it triggered significant preference and aggregation in both C. maculata males and females at 100 μg/μL, while induced a strong avoidance in M. sacchari. It significantly decreased the digging and residing preference of S. invicta workers at high concentration, but showed certain attractiveness to workers at a lower concentration. Moreover, TMP inhibited aphid-tending efficiency of S. invicta thereby curbing the benefits to M. sacchari. The findings provide important evidence that TMP is a pheromone in C. maculata and a semiochemical to both S. invicta and M. sacchari. It may affect the mutualistic interactions between S. invicta and M. sacchari by mediating the behaviors of both species.

     

Influence of the chemical composition of kenaf bast and core on the alkaline pulping response

The bast and core of kenaf,Hibiscus cannabinus L., have markedly different chemical components and alkaline cooking responses. The bast had about double the hot-water extractives content and only about half the lignin content of the core. The core contained a large amount of hemicellulose, mostly composed of xylan. The lignin structures of bast and core were also quite different: The former had a significant abundance of syringyl structures. Evidence showed that the bast was much more easily delignified than the core. When the bast and core were cooked together in alkaline condition, the pulp yields at the same kappa number were higher than those of the individual pulpings of bast and core. The bast-core pulping gave a positive effect on the yield of bast pulp in the sodaanthraquinone and kraft pulpings. On the other hand, kenaf was abundant in the hot water extractives. These extractives consumed alkali during cooking to a relatively large extent but acted as a protector of hemicellulose and slightly increased the pulp yields.Part of this paper was presented at the 48th and 49th Annual Meetings of the Japan Wood Research Society, Shizuoka, April 3–5, 1998 and Tokyo, April 3–5, 1999     

Effects of borate impregnation on the response of wood strength to heat treatment

Based on the strong correlation between acidity and thermal degradation in wood reported in previous studies, the effect of borate impregnation as an alkali-buffering medium was investigated on the strength properties of thermally modified wood. Wood samples were impregnated with 0.1 M Sodium borate solution (pH=9) before they were subjected to heat treatment at temperatures of 180°C and 200°C for durations of 2 and 4 h. The borate impregnation results in some reductions in the severity of strength loss during heat treatment and this is invariably due to buffering effect of the alkali on the acidity of wood, which could have mitigated the degree of degradation. The positive effects of borate impregnation as a pretreatment on the strength properties of heat-treated wood depend on the degree of heat treatment. Hence, the use of borate impregnation as a pretreatment method for heat treatment is recommended only where a relatively mild heat treatment is involved.     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

The effects of within-species and between-species variation in wood density on the photodegradation depth profiles of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa)

Low density wood is more rapidly eroded than denser wood when exposed to the weather, possibly because it is more susceptible to photodegradation. Fourier transform infrared microscopy was used to examine: (1) the depth of photodegradation in earlywood and latewood of sugi (Japanese cedar) and earlywood of hinoki (Japanese cypress) exposed for up to 1500 h to artificial sunlight emitted by a xenon lamp (375 W/m² within the 300 to 700 nm spectral range); and (2) the relationship between the density of wood tissues and depth of photodegradation. The depth of photodegradation varied between species (sugi and hinoki) as well as within a growth ring (sugi earlywood and latewood), and there was an inversely proportional relationship between depth of photodegradation and wood density. These findings may explain why low density earlywood is more rapidly eroded than latewood during weathering, and more generally, why there is an inverse relationship between the density of wood species and their rate of erosion during artificial and natural weathering. Part of this work was presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

Distribution of stem decay in the beech trees of the Azerbaijan and its impact on the output of commercial wood

To determine the distribution of stem decay in the beech stands of Azerbaijan, we sought to identify the species, number, and height of attachment of fruiting bodies;the extent of decay in tree trunks growing under different conditions;and its influence on the trees’ commercial wood. The research was conducted on three farms representing the most common forest types of the Greater Caucasus within Azerbaijan. Examination of the presence of fruiting bodies in the tree trunk revealed that stem decay is the most common infection in beech (Fagus orientalis) stands, especially in fresh, moist areas, with less infection under dry growing conditions. In this work, the length, diameter, and volume of decay were studied by infecting the trunks of 93 model trees affected with mushrooms in 1–4 m cuttings. Our results showed that as the age of the stand increased, extent, diameter, and volume of decay increased significantly: the extent of decay from 1.47 to 6.43 m;the diameter of the decay from 8.15 to 32.7 cm;and the volume of decay from 2.5 to 13.2%. The relationship between age and the specified indicators is presented graphically. Using data obtained from the same sample of trees, we determined the expected and actual yield of commercial wood by age class. We determined that stem decay in beech stands leads to a decrease in the yield of commercial wood on average from 25.1% in the middle-aged to 14.8% in overmature plantations, respectively, with an estimated yield of 40.8–62.7%. Here we present mathematical models of the output of commercial wood from the infected part of the stands by age classes with the use of average data on the extent of decay in model trees.     

Effect of volatile matter from wood chips on the activity of house dust mites and on the sensory evaluation of humans

The effect of volatile matter from various wood chips on house dust mites and their influence on human comfort were measured. To investigate the effect of volatile matter on the mite speciesDermatophagoides pteronyssinus, the activity of the mites was observed after exposure to volatile matter from six species of wood chips. The degree of activity of the mites was classified into two categories: (1) walking or moving and (2) immobilized. To measure their influence on human comfort, the smells of those wood chips were evaluated by the subjects. Among softwoods, volatile matter fromChamaecyparis obtusa andThujopsis dolabrata var.hondai chips suppressed the activity of the mites highly and made the subjects feel refreshed and unexcited.Cryptomeria japonica showed slight suppression of the mites and was considered to be refreshing, natural, and unexciting by the subjects. Among hardwoods,Cinnamomum camphora highly suppressed mites activity and was considered to be non-refreshing and exciting by the subjects. Part of this paper was presented at the 49th Annual Meeting of the Japan Wood Research Society, Tokyo, April 1999     

Bondability of tropical fast-growing tree species III: curing behavior of resorcinol formaldehyde resin adhesive at room temperature and effects of extractives of <Emphasis Type="Italic">Acacia mangium</Emphasis> wood on bonding

The effects of curing time at room temperature and methanol extracts from Acacia mangium on the curing behavior of resorcinol formaldehyde (RF) adhesive were examined by using the thermomechanical analysis spring method. For a specimen that was cured for 3 months at room temperature, the relative elasticity (E _r) curve did not change to a hard glass state from room temperature to 200°C and the adhesive had cured completely. The initial temperature of the reactive zone for chemical and mechanical changes was 15° and 25°C higher than that for the control when 10 and 15 parts by weight methanol extract was added to the liquid adhesive, respectively. It appears that the extractives of A. mangium in RF adhesive interferes with the chemical cure of the adhesive. It is suggested that a combination of curing time and sweeping by methanol on the laminae surface can improve the bonding performance of A. mangium laminates bonded with RF at room temperature.     

Effects of the lateral growth rate on wood quality parameters of Eucalyptus grandis from different latitudes in Brazil and Argentina

Climate change resulting from increased atmospheric carbon dioxide (CO₂) and shortages of fossil fuels such as petroleum are major problems worldwide. Under these conditions, demand for woody biomass resources is increasing. We investigated the feasibility of using fast-growing Eucalyptus grandis for material production. Samples of E. grandis were collected from four plantations in different latitude divisions, including tropical and subtropical Brazil and subtropical Argentina. Various xylem qualities were measured and related to the lateral growth rate. Lateral growth rate did not significantly affect the longitudinal released strain of the surface growth stresses or the xylem density at any of the sampling sites. Higher lateral growth rate, higher values of xylem density, and lower absolute values of the released strain were observed in plantations closer to the equator. Higher growth rates in tropical climate promote longer fiber length. In subtropical plantations, smaller diameter trees will produce tension wood with smaller microfibril angles. Planting E. grandis closer to the equator thus produces higher quality wood than in plantations at lower latitudes.     

Growth response to the stress of low osmotic potential,salinity and high pH in cultured shoot of Chinese poplars

In vitro cultured shoots of three Chinese poplar species (Populus tomentosa, P. alba cv. Pyramidalis andP. euphratica) and an improved poplar (FS-51), as a control, were exposed to the stress of low osmotic potential, salinity and high pH, and the shoot growth was measured.P. tomentosa andP. euphratica could grow even under the high osmotic stress (0.5m mannitol; −1.7 MPa).P. euphratica shoots which were previously cultured on the medium containing 0.7m mannitol (−2.4 MPa) recovered its growth after being transplanted to the medium without mannitol. The shoot growth ofP. euphratica was not so reduced even on the medium containing 100 mM NaCl. However, growth of the other poplars markedly reduced with 10 mM NaCl. Medium pH (pH 5.8–10) also did not affect the shoot growth ofP. euphratica. These poplars have different tolerance to the stresses in cultured shootin vitro. P. euphratica was extremely tolerant to the stresses which are possible to damage plants in dry land. A part of this study was presented at the 104th Annual Meeting of the Japanese Forestry Society. (1993).     

Tree-ring response of Larix chinensis on regional climate and sea-surface temperature variations in alpine timberline in the Qinling Mountains

Tree-ring width chronologies of Larix chinensis were developed from the northern and southern slopes of the Qinling Mountains in Shaanxi Province,and climatic factors affecting the tree-ring widths of L.chinensis were examined.Correlation analysis showed that similar correlations between tree-ring width chronologies and climatic factors demonstrated that radial growth responded to climate change on both slopes.The radial growth of L.chinensis was mainly limited by temperature,especially the growing season.In contrast,both chronologies were negatively correlated with precipitation in May of the previous year and April of the current year.Spatial climate-correlation analyses with gridded land-surface climate data revealed that our tree-ring width chronologies contained a strong regional temperature signal over much of northcentral and eastern China.Spatial correlation with seasurface temperature fields highlights the influence of the Pacific Ocean,Indian Ocean,and North Atlantic Ocean.Wavelet coherence analysis indicated the existence of some decadal and interannual cycles in the two tree-ring width chronologies.This may suggest the influences of El Nin˜o-Southern Oscillation and solar activity on tree growth in the Qinling Mountains.These findings will help us understand the growth response of L.chinensis to climate change in the Qinling region,and they provide critical information for future climate reconstructions based on this species in semi-humid regions.     

Mechanical properties of wood in an unstable state due to temperature changes,and analysis of the relevant mechanism IV: effect of chemical components on destabilization of wood

In order to investigate the effects of chemical components and matrix structure on the destabilization of quenched wood, we examined the physical and mechanical properties of steam-treated wood, hemicellulose-extracted wood, and delignified wood, which were treated at different levels. For steam-treated and hemicellulose-extracted wood,the relative relaxation modulus of the quenched sample was lower than that of the respective control sample. For delignified wood, the relative relaxation modulus fell with weight loss and reached a minimum value at a certain weight loss, and subsequently increased significantly. The hygroscopicity of all treated samples changed slightly by steaming, whereas increased with removing the component. More-over, the average volumetric swelling per 1% MC at 100% relative humidity (RH) was less than at 75% RH and 93% RH for component-removed wood. It was clear that a void structure existed. As a result, the destabilization evaluated by the fluidity (1 - E _t/E ₀) of steam-treated wood was influenced by the amount of adsorbed water. For component-removed wood, destabilization increased temporarily at lower weight loss because of nonuniform cohesive structure. At high weight loss, destabilization will decreased because capillary-condensed water gathered in the voids and obstructed the motion of adsorbed water. However, the destabilization of all treated wood changed less than that of chemically modified wood.     

Temperature-dependent functional response of two aphid parasitoids, Aphidius colemani and Aphidius matricariae (Hymenoptera: Aphidiidae), on the cotton aphid

The functional response of two aphid parasitoids, Aphidius colemani Viereck and Aphidius matricariae (Haliday) (Hymenoptera: Aphidiidae), on the cotton aphid, Aphis gossypii Glover (Homoptera: Aphididae), was examined. Five constant temperatures (10, 15, 20, 25, and 30°C) and six host densities (2, 4, 8, 16, 32, and 64) were used during a 24-h period. At each temperature, 2–64 third-instar nymphs of A. gossypii were exposed to individual wasp mating pairs. A type II functional response model for both parasitoid wasps was fit separately for each temperature. The results showed that instantaneous attack rate (a) in A. colemani increased linearly as the temperature increases from 10 to 30°C, but in A. matricariae, (a) increased almost linearly with temperature to reach a maximum at 25°C, and then decreased at 30°C, displaying an asymmetrical dome-shaped pattern. The highest instantaneous attack rate for A. colemani and A. matricariae were calculated 0.940 ± 0.144 day⁻¹ at 30°C and 0.687 ± 0.157 day⁻¹ at 25°C, respectively. Handling time (T _h) for A. colemani was inversely proportional to temperature and ranged from 0.093 ± 0.026 day at 10°C to 0.032 ± 0.004 day at 30°C, but in A. matricariae, (T _h) was between 0.078 ± 0.015 day at 10°C and 0.036 ± 0.014 day at 20°C. A. colemani achieved higher parasitism rate than A. matricariae at higher temperatures. This observation suggests that A. colemani maybe more effective for biological control of the cotton aphid during warmer periods.     

湖南省退耕还林工程社会经济效益调查研究

调查结果显示：①农户家庭总收入和净收入退耕后2004年,分别增长41．54％、62．95％,且退耕后农户家庭收入结构也发生了一定的变化;②农户家庭生活和文化消费总支出退耕后2004年增长率分别为37．28％、51．17％,且退耕后农户家庭的生活和文化消费支出结构也发生了一定的变化;③恩格尔系数退耕后2004年下降了3．56％,说明退耕后农民的生活水平得到了进一步提高;④农户家庭就医率和适龄儿童入学率上升到了退耕后2004年的84.5％、97．8％;⑤生态环境建设在我省干部和农户心目中的地住逐渐提高,说明生态环境建设在我省干部和群众中奠定了坚实的民意基础,产生了较为深远的影响力。     

湘西自治州退耕还林工程后续产业调查与思考

退耕还林工程是21世纪一项战略生态工程。作者就湘西自治州退耕还林8年补助期满后农民生计和退耕还林后续产业情况进行了调查分析,并根据退耕还林工程后续管理存在的问题,提出了退耕还林工程后续产业发展应采取的对策。