In Vitro Starch Digestibility of Gluten‐Free Spaghetti Based on Maize,Chickpea, and Unripe Plantain Flours

Gluten‐free and high indigestible carbohydrate food development is a topic that deserves investigation because of an increased focus on gluten intolerance and celiac disease and on metabolic disorders caused by overweight and obesity. Here, chickpea and maize flours were used as sources of protein and carbohydrate (because of the level used in the mixture) and unripe plantain as an indigestible carbohydrate source in composite gluten‐free spaghetti elaboration. The mixture of unripe plantain, chickpea, and maize was used at different levels to prepare spaghetti (samples S15Pla and S25Pla); control pasta was made of 100% semolina (S100Sem), and a 100% unripe plantain flour (S100Pla) pasta was also evaluated. In vitro amylolysis rate of fresh and stored (three and five days) spaghetti was assessed. The spaghetti with 100% unripe plantain (S100Pla) had higher resistant starch (RS) content than the control sample and the two cooked composite gluten‐free spaghettis (S15Pla, S25Pla), and RS further increased with the storage time. The plantain spaghetti (S100Pla) also had the highest rapidly digestible starch and the lowest slowly digestible starch contents; this pattern agrees with the hydrolysis rate, especially after cold storage. The stored S25Pla spaghetti showed the lowest hydrolysis rate and predicted glycemic index. Blending chickpea, maize, and unripe plantain flours represents a way to obtain gluten‐free spaghetti with high nondigestible carbohydrate content and slow digestion properties.     

Effect of Physical State of Nonpolar Lipids on Rheology and Microstructure of Gluten‐Starch and Wheat Flour Doughs

To clarify the effects of solid fat and liquid oil on dough in more detail in a simpler system, gluten‐starch doughs with different gluten contents were investigated. The results from rheological measurements indicate that dough with a higher starch content has less resistance to strain and dough with a lower starch content has a rubber‐like structure. The effects of the physical state of nonpolar lipids such as fat and oil on gluten‐starch doughs and wheat flour doughs were investigated using rheological measurements and scanning electron microscopy. Fat‐containing dough had more gas cells and a very smooth gluten gel surface with few holes, which may provide higher tolerance to strain. Moreover, the fat seemed to uniformly distribute the gluten gel between the starch granules in the dough, which reduced the friction between starch granules and led to a lower storage modulus. A mechanism governing the effect of fats on loaf volume is proposed based on the phenomena observed in the fat‐containing dough.     

Network Formation in Gluten‐Free Bread with Application of Transglutaminase

One of the main problems associated with gluten‐free bread is obtaining a good structure. Transglutaminase (TGase), an enzyme that catalyzes acyl‐transfer reactions through which proteins can be cross‐linked could be a way to improve the structure of gluten‐free breads. The objective of this study was to evaluate the impact of TGase at different levels (0, 0.1, 1, and 10 U of TGase/g of protein) on the quality of gluten‐free bread. The recipe consisted of white rice flour (relative amount: 35), potato starch (30), corn flour (22.5), xanthan gum (1), and various protein sources (skim milk powder [SMP] [12.5], soya flour, and egg powder). The influence of the various proteins in combination with the different addition levels of TGase on bread quality (% bake loss, specific volume, color, texture, image characteristics, and total moisture) was determined. Confocal laser‐scanning microscopy (CLSM) was used to evaluate the influence of TGase on the microstructure of the bread. Baking tests showed that TGase had an effect on the specific volume of the bread. For instance, the SMP bread with 10 U of enzyme contained the most compact structure, which was reflected in the crumb texture profile analysis results (highest values) (P < 0.05), digital image analysis (highest level of cells/cm²) (P < 0.05), and CLSM micrographs (network formation). Finally, it can be concluded that it is possible to form a protein network in gluten‐free bread with the addition of TGase. However the efficiency of the enzyme is dependent on both the protein source and the level of enzyme concentration.     

Gluten‐Free Bread from Sorghum: Quality Differences Among Hybrids

Gluten‐free breadmaking quality of 10 sorghum flours was compared using (relative basis) decorticated sorghum flour (70), corn starch (30), water (105), salt (1.75), sugar (1), and dried yeast (2). Batter consistency was standardized by varying water levels to achieve the same force during extrusion. Crumb properties were evaluated by digital image analysis and texture profile analysis (TPA). Significant differences (P < 0.001) in crumb grain were found among the hybrids with mean cell area ranging from 1.3 to 3.3 mm² and total number of cells ranging from 13.5 to 27.8/cm². TPA hardness values of the crumb also varied significantly (P < 0.001). Based on significant correlations (P < 0.01), starch damage, influenced by kernel hardness, was identified as a key element for these differences. Breads differed little in volume, height, bake loss, and water activity. Investigation of added ingredients on bread quality was conducted using response surface methodology (RSM) with two sorghum hybrids of opposite quality. Addition of xanthan gum (0.3–1.2% flour weight basis [fwb]) and skim milk powder (1.2–4.8% fwb) and varying water levels (100–115% fwb) were tested using a central composite design. Increasing water levels increased loaf specific volume, while increasing xanthan gum levels decreased the volume. As skim milk powder levels increased, loaf height decreased. Quality differences between the hybrids were maintained throughout the RSM.     

Starch–Hydrocolloid Interaction in Chemically Leavened Gluten‐Free Sorghum Bread

A satisfactory chemically leavened gluten‐free sorghum bread method was developed by using a blend of 90% commercially milled sorghum flour and 10% rice, tapioca, or potato starch as the “flour.” The most effective starch/hydrocolloid combinations in the formula were potato starch with 4% xanthan, tapioca starch with 3% hydroxypropyl methylcellulose, and rice starch with 3% xanthan. Overall, there was not a significant difference in the quality of loaves made with each starch/hydrocolloid combination. Rapid visco analysis showed that batter viscosity did not have a significant impact on loaf volume index but did affect crumb grain properties. Batters with lower viscosity produced loaves with better crumb grain.     

Application of Response Surface Methodology in the Development of Gluten‐Free Bread

The formulation of gluten‐free (GF) bread of high quality presents a formidable challenge as it is the gluten fraction of flour that is responsible for an extensible dough with good gas‐holding properties and baked bread with good crumb structure. As the use of wheat starch in GF formulations remains a controversial issue, naturally GF ingredients were utilized in this study. Response surface methodology was used to optimize a GF bread formulation primarily based on rice flour, potato starch, and skim milk powder. Hydroxypropylmethylcellulose (HPMC) and water were the predictor variables. Analyses of the treatments from the design were made 24 hr after baking. Specific volume and loaf height increased as water addition increased (P < 0.01). Crumb firmness decreased as water levels increased (P < 0.01). Significant interactions (P < 0.01) between HPMC and water were found for the number of cells/cm². The number of large cells (>4 mm²) decreased with increasing levels of HPMC and water. Optimal ingredient levels were determined from the data obtained. The optimized formulation contained 2.2% HPMC and 79% water flour/starch base (fsb) and measured responses compared favorably to predicted values. Shelf‐life analysis of the optimized formulation over seven days revealed that, as crumb firmness increased, crust firmness and crumb moisture decreased.     

Effect of Freeze‐Thaw Cycles on the Gluten Fibrils and Crumb Grain Structures of Breads Made from Frozen Doughs

The effects of freeze damage on the crumb grain and on the underlying gluten fibrils of baked breads were studied using scanning electron microscopy (SEM) and magnetic resonance imaging (MRI). Sweet and white bread doughs were stored at ‐20°C and subjected to freeze‐thaw cycles. SEM images of grain pore walls that were washed with distilled water (20°C) clearly showed that gluten fibrils forming the skeletal framework of pore walls were cut and became coarse and nonuniform strings and that many knots were generated on gluten fibrils from freeze damage. An increase in the number of freeze‐thaw cycles increased both the coarseness of the gluten fibrils and the size of the knots, although the apparent damage was not clearly detected on the crumb grain with MRI.     

Compliance with Gluten‐Free Labelling Regulation in the Brazilian Food Industry

Gluten is an important protein complex for baking products found in wheat, rye, barley, and some oat varieties. However, some people need to avoid these grains and their products because they result in gluten‐related disorders. The only treatment for these individuals is to engage in a gluten‐free diet. The objective of this work was to verify if the gluten content of several commercial food products sold in Brazil complied with their labeling. The Méndez ELISA R5 sandwich method was used to analyze 437 samples, and of these, 70% were labeled as gluten‐free, 26% as containing gluten, and 4% not labeled in relation to gluten. The results indicated that 89% of the products labeled as gluten‐free were correctly labeled and 11% were not, which represented a risk for celiac people.     

Impact of Chickpea‐ and Raw Plantain‐Based Gluten‐Free Snacks on Weight Gain,Serum Lipid Profile,and Insulin Resistance of Rats Fed with a High‐Fructose Diet

Two gluten‐free snacks containing chickpea, plantain, and maize flours at different concentrations were prepared. The impact of chickpea or plantain flour level on weight gain, insulin resistance, and serum lipid profile of rats fed a high‐fructose diet was evaluated. A dose of 0.93 g/kg was used in the experiments to simulate the snack consumption level by humans (average content of a small package, which is twice the portion recommended by the U.S. Department of Agriculture). Compared with a high‐fructose reference diet, consumption of both snacks decreased weight gain, fasting serum glucose, and triglycerides. The effect was more pronounced for snack B, with higher chickpea content. Consumption of these snacks may also have beneficial effects against obesity and cardiometabolic complications. Chickpea flour is a promising functional ingredient for the development of antiobesity foods.     

Definition of the “Purity Protocol” for Producing Gluten‐Free Oats

Several oat processors in the United States and Canada operate under what is referred to as a Purity Protocol for the provision of gluten‐free oats. This term is derived from a Health Canada position statement that indicated that pure oats, which they defined as oats that are harvested, transported, stored, processed, and manufactured under good manufacturing practices (GMPs) to minimize the presence of gluten, can safely be consumed by some persons with celiac disease. While proprietary definitions of the appropriate GMPs have been used in industry for many years, no independent definition of the requirements to make a Purity Protocol claim has been published. This paper provides a consensus definition of the Purity Protocol requirements based on input from the four largest Purity Protocol oat processors in North America. This definition provides transparency to gluten‐free consumers and allows for auditing of a Purity Protocol claim.     

REVIEW: Effects of Germination on the Nutritional Profile of Gluten‐Free Cereals and Pseudocereals: A Review

There are a growing number of individuals diagnosed with food allergies and intolerances. Gluten, in particular, is avoided by many individuals because of celiac disease, gluten intolerance, and gluten ataxia. Individuals with allergies, intolerances, or both follow strict diets, but there is concern that these individuals may be at risk of several nutrient deficiencies, including decreased calcium, iron, B vitamins, and fiber. To prevent deficiencies, alternative sources of these nutrients must be provided. Gluten‐free cereals and pseudocereals such as amaranth, buckwheat, corn, millet, rice, sorghum, and quinoa can be excellent sources of vitamins, minerals, fiber, and other important nutrients. Germination of these edible seeds has been shown to further increase nutrient content and to reduce antinutrients. Their use to naturally fortify and enrich gluten‐free foods has great potential. Although there are many benefits to germinated seeds in food, more research must be done to improve texture and sensory properties to gain wider consumer acceptance. A review of germination of gluten‐free cereals and pseudocereals and its effect on their nutritional profile is presented.     

From Field to Table: A Review on the Microbiological Quality and Safety of Wheat‐Based Products

Throughout history, wheat‐based foods have been considered among the safest of all foods produced for human consumption. In part, this claim reflects both the low risk profile of low‐moisture foods and the thermal processes used to produce the finished product. Nevertheless, raw flour contains a number of potential hazards, which, if not properly managed, may have the potential to result in serious public health consequences. These hazards are mostly microbiological in origin and arise mainly during production and distribution through the wheat supply chain. The physical processes carried out during milling have minimal impact on the level of contamination present on grain; therefore, the initial microbiological quality of wheat grain has a strong influence on the ultimate quality and safety of milling end products. Although most flour‐based foods are processed and consumed in forms that are less likely to be contaminated with pathogens, refrigerated dough products have the potential to be a safety hazard to consumer health because they could be consumed raw or undercooked. The risk for exposure to pathogenic microorganisms present in raw flour by eating uncooked baking mixture has been demonstrated by several outbreaks. Such food safety incidents have led to heightened manufacturer and consumer awareness about safety related to flour‐containing foods.     

Long‐Term Durum Wheat‐Based Cropping Systems Result in the Rapid Saturation of Soil Carbon in the Mediterranean Semi‐arid Environment

Climate, soil physical–chemical characteristics, land management, and carbon (C) input from crop residues greatly affect soil organic carbon (SOC) sequestration. According to the concept of SOC saturation, the ability of SOC to increase with C input decreases as SOC increases and approaches a SOC saturation level. In a 12‐year experiment, six semi‐arid cropping systems characterized by different rates of C input to soil were compared for ability to sequester SOC, SOC saturation level, and the time necessary to reach the SOC saturation level. SOC stocks, soil aggregate sizes, and C inputs were measured in durum wheat monocropping with (Ws) and without (W) return of aboveground residue to the soil and in the following cropping systems without return of aboveground residue to soil: durum wheat/fallow (Wfall), durum wheat/berseem clover, durum wheat/barley/faba bean, and durum wheat/Hedysarum coronarium. The C sequestration rate and SOC content were lowest in Wfall plots but did not differ among the other cropping systems. The C sequestration rate ranged from 0.47 Mg C ha⁻¹ y⁻¹ in Ws plots to 0.66 Mg C ha⁻¹ y⁻¹ in W plots but was negative (−0.06 Mg C ha⁻¹ y⁻¹) in Wfall plots. Increases in SOC were related to C input up to a SOC saturation value; over this value, further C inputs did not lead to SOC increase. Across all cropping systems, the C saturation value for the experimental soil was 57.7 Mg ha⁻¹, which was reached with a cumulative C input of 15 Mg ha⁻¹. Copyright © 2015 John Wiley & Sons, Ltd.     

Glass Transition Behavior and Rheological Properties of Surfactants and Gluten‐Surfactant Mixtures

Diacetyltartaric acid esters of monoglycerides (DATEM) and sodium stearoyl lactylate (SSL) displayed thermal events corresponding to glass transition temperature (T_g) and melting of crystalline domains, while monoglycerides (MG) exhibited an endothermic peak corresponding to melting of crystalline structures when heated in a differential scanning calorimeter. The plasticizing effect of water on T_g of gluten exhibited little apparent change in the presence of DATEM, MG, or SSL (glutensurfactant 10:1), in the moisture range of 6.5–21.3% as shown by mechanical spectrometry and differential scanning calorimetry. Glutensurfactant mixtures showed higher G′ and apart from gluten‐SSL, which displayed higher tan δ (G″/G′) at ≤2.51 rad/sec, lower tan δ values than gluten in the frequency range of 0.1–100 rad/sec. DATEM and SSL softened the gluten network before cross‐linking reactions, while MG shifted the onset of cross‐linking reactions to higher temperatures at moisture contents of 30–40%. Complete vitrification of the gluten network occurred at higher temperatures, at the indicated moisture contents, in the presence of surfactants. Softening of the matrix and the delay in cross‐linking of gluten, in the presence of surfactants, might allow for greater expansion of doughs during baking with concomitant increase in loaf volumes.     

Effects of Germination Duration on Milling,Physicochemical, and Textural Properties of Medium‐ and Long‐Grain Rice

Germinated brown rice is popular in Asia for its increased γ‐aminobutyric acid (GABA) content and sweeter and softer texture compared with conventional brown rice. However, most studies investigated germinated rice properties on medium‐grain or aromatic rice. The objective of this study was to compare differences between a medium‐grain (Jupiter) and a long‐grain (Wells) rice under similar germination conditions on their milling, physicochemical, and textural properties over the course of germination. Rough rice was soaked in water at 25°C for 12 h and then incubated at 30–34°C for four germination durations. Wells had a higher breakage percentage and a greater weight decrease than Jupiter during germination. Wells had a significantly lower GABA content before germination and at the first two germination durations than Jupiter, but the GABA content in Wells significantly increased at the third germination duration to become significantly higher than that of Jupiter. There were no significant changes in gelatinization temperatures and pasting properties of germinated rice from both cultivars at different germination durations. The cooked rice hardness from Wells decreased at the longest germination duration, whereas Jupiter showed a more significant decrease in cooked rice stickiness from germination. The results demonstrate that the impacts of germination on physical, chemical, and textural properties of rice were affected by grain type and germination duration.     

Temperature Resistance of Xylanase Inhibitors and the Presence of Grain‐Associated Xylanases Affect the Activity of Exogenous Xylanases Added to Pelleted Wheat‐Based Feeds

The addition of exogenous xylanases (EX‐XYL) to wheat‐based poultry feeds is a common practice today. Wheat contains xylanase inhibitors (XI) and grain‐associated xylanases (GA‐XYL), which could affect the action of the EX‐XYL. In this study, both GA‐XYL and XI activity in feeding‐quality wheat were assessed. In addition, the effect of the conditions during digestion in monogastrics and the effects of pelleting at different conditioning temperatures on GA‐XYL and XI were investigated. The GA‐XYL activity varied between no activity and 0.821 XU/g. In contrast, the XI activity was consistently high in all wheat samples and ranged between 259 and 331 IU/g. Simulating the digestive process did not affect the activities of GA‐XYL or XI. Pelleting at 85°C or higher reduced the XI activity up to 46%. GA‐XYL, however, were more heat‐sensitive, and their activity was reduced to 67% at 60°C. The extract viscosity increased and the release of reducing sugars decreased at higher conditioning temperatures. In addition, the net effect of EX‐XYL on extract viscosity increased at higher temperatures, whereas the release of reducing sugars was not affected. In conclusion, XI affected the action of EX‐XYL during the digestive process, and pelleting did not eliminate their negative effects.     

Effect of Parboiling on Milling,Physicochemical, and Textural Properties of Medium‐ and Long‐Grain Germinated Brown Rice

Germinated brown rice is considered a more nutritious and palatable cooked product than conventional brown rice. However, germination usually decreases rice milling yield and alters some physicochemical properties. Parboiling is commonly used to increase milling yield and retain nutrients, but it also changes rice color and texture. The objective of this study was to investigate the effect of parboiling on milling, physicochemical, and textural properties of a medium‐grain and a long‐grain rice after germination at varying durations. Germinated rice samples of three germination durations were prepared with one germination time before the optimum time at which 70% of rice revealed hull protrusion, the optimum time, and one time after. Germinated rice was then immediately parboiled at 120°C for 20 min and was then immediately dried. The milling, physicochemical, and textural properties of parboiled germinated rice from both cultivars were determined. Parboiling significantly decreased the percentage of brokens, whiteness, and the apparent amylose content and increased γ‐aminobutyric acid content (GABA) in the nongerminated rice and rice at the first germination duration for both cultivars. Parboiling reduced pasting viscosities for both cultivars, but Jupiter still exhibited higher pasting viscosities than Wells. Cooked parboiled germinated rice was overall softer than nonparboiled rice because of kernel splitting, but Wells remained harder and less sticky than Jupiter. In conclusion, it is beneficial to combine parboiling with germination to enhance nutritional values and improve milling properties without affecting textural properties for both rice cultivars.     

Preparation and Functional Properties of Gluten Hydrolysates with Wheat‐Bug (Eurygaster spp.) Protease

Suni‐bug (Eurygaster spp.) enzyme was partially purified from bug‐damaged wheat and used to prepare gluten hydrolysates at 3% and 5% degree of hydrolysis (DH). Functional properties of gluten and gluten hydrolysates were determined at 0.2% (w/v) protein concentration and pH 2–10. Gluten solubility after enzymatic hydrolysis increased significantly (P < 0.05) up to 89.1, 89.6, and 95.0% at pH 7, 8, and 10, respectively. Emulsion stability (ES) of gluten hydrolysates improved at neutral and alkaline pH (P < 0.05) and emulsifying capacity (EC) increased significantly (P < 0.05) except at pH 10. Foaming capacity (FC) values of gluten hydrolysates were significantly higher (P < 0.05) at pH 6, 7, 8; foam stability (FS) values of gluten hydrolysates were significantly higher (P < 0.05) at pH 6 and 7. Enzymatic modification of gluten by wheat‐bug enzyme resulted in hydrolysates with higher antioxidant activity compared to gluten. Significant correlations (P < 0.001) were found between solubility and EC, ES, FC, and FS values of gluten and its hydrolysates with 3% and 5% DH.     

A New Method to Study Simple Shear Processing of Wheat Gluten‐Starch Mixtures

This article introduces a new method that uses a shearing device to study the effect of simple shear on the overall properties of pasta‐like products made from commercial wheat gluten‐starch (GS) blends. The shear‐processed GS samples had a lower cooking loss (CL) and a higher swelling index (SI) than unprocessed materials, suggesting the presence of a gluten phase surrounding starch granules. Pictures of dough micro‐structure by confocal scanning laser microscopy (CSLM) showed the distribution of proteins in the shear‐processed samples. This study revealed that simple shear processing could result in a product with relevant cooking properties as compared with those of commercial pasta. Increasing gluten content in GS mixtures led to a decrease in CL and an increase in maximum cutting stress of processed samples, whereas no clear correlation was found for SI values of sheared products. It was concluded that the new shearing device is unique in its capability to study the effect of pure shear deformation on dough development and properties at mechanical energy and shear stress levels relevant to industrial processing techniques like pasta extrusion.