Model Building and Simulation for Subcritical Pressure Boiler

In order to meet the demand of large scale boiler design and operating optimization, this paper establishes the dynamic mathematic model for domestic 600MW subcritical pressure boiler. MMS software is adopted in the whole process from modeling to simulation. This software make process simple and quick. This model is based on modulariza- tion and the comprehensive physical and chemical process in boiler is considered. Simulation result shows that the re- sponses of this model under different disturbance are coincident to mechanics analysis. The simulation result under ste Pdisturbance can be used to analyze unit changes and provide some guide and it also can supply performance reference data to boiler design.     

Modelling the predation,growth and population dynamics of fish within a spatially-resolved shelf-sea ecosystem model

The development and analysis of a fish population module within the European Regional Seas Ecosystem Model (ERSEM) is described. Fixed predation rates on ERSEM zooplankton and zoobenthos, which may be used in place of this dynamic module of fish, are described also. The dynamic module is age-structured, with state variables for the number of individuals and their weight, the latter partitioned into structural (skeletal, essentially) and remobilizable ‘reserve’ components. It is capable of prediction of observed patterns of both positive and negative changes in individual weight. The fish are modelled as one population for the whole North Sea, superimposed on the ERSEM box structure. Parameters have been derived from the literature where possible and, for herring, certain parameters have been adjusted to match independent estimates of growth in the field. Preliminary results show that herring growth rate depends inversely on biomass, when changes in the latter are caused by altered fishing mortality. The magnitude of these effects is in agreement with historical data for herring in the North Sea. The model is discussed in relation to previous attempts to model fish population dynamics, particularly in the North Sea.     

CCD radiation temperature measurement method for hot continuous casting billet surface

According to the present research status and existing problems of hot continuous billet surface temperature non contact measurement technology, a real time temperature measurement model, which combines two-color(R,G) and monochrome (B) of surface radiation image, is established. The surface image is collected through tricolor charge coupled device (CCD) sensor, at the same time, the temperature dynamic response range of CCD can be improved by controlling integrated time and setting different apertures. Through computer image process technology, multi-point temperature can be measured simultaneously, and 2-D temperature field distribution on continuous casting billet surface can be realized. It is be proved by theory and application that the model and method can provide a theory and technology support for realizing surface temperature field on-line measurement for continuous casting billet.     

Modeling and Simulation for 440 t/h CFB Boiler Steam/Water System

Dynamic mathematical model,which is based on the character of power-plant boiler system,is established by the means of modularization. On the basis of dynamic mathematical models,simulation model of the object is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.The simulation model helps to evaluate the influences that the dynamic process in steam/water's side brings to the boiler's operation and have some directive significance to design method of boiler and optimize run.     

Load Forecasting Based on BP ANN for Economical Operation of Electric Boiler with Heat Reservoir Under Time-sharing price

Along with the generalization of DSM and time-sharing price system, the use of electric boiler with heat reservoir becomes more and more extensive. Load forecasting of heat supply system is an important base in the study of economical operation of electric boiler with heat reservoir under time-sharing price. The BP ANN modeling of the load forecasting for a 1200 kW electric boiler is discussed. The result of hourly heat load forecasting accords well with the real heat load.     

Real Time Economic Load burdening Method of the Regulating Peak Load about the Boiler Units of Power Plant

Basing on the combing the Equivalent Differential Increment Theory(EDIT) with the Equivalent Polyhedron Method(EPM),the optimum real time economical adjustment of regulating peak load for each boiler about power plant is presented. The results are applying in the site and the economical benefit is increased obviously. The method is simply,and cuts the time.     

A Dynamic Mathematical Model of Ball Pulverized Storage System and Its Simulation with MMS

This paper presents a mathematical model , simulating program and results ofball pulverlzed coal storage system. The program of simulation is writen with ACSL language. theGear arithmetics to solve the differentlal equations is recom merded by MMS. The model has beenmodularized according to the reguirements of MMS. This modular called DTM modular can be con-sidered as one component of MMS modular library.     

Model predictive control strategy of a medium hybrid electric vehicle

The intense coupled and nonlinear behaviors were observed on the tall long span tower line systems which were under the icing and wind loads in heavy icing areas. A set of stiffness equations of insulator, conductor and boundary conditions was deduced. Taking the ±800 kV UHV DC transmission line from Xiangjiaba to Shanghai as an example, the simplified numerical model of transmission tower, conductor, insulator and constraint was developed. The long span transmission tower line system models under seven loads conditions were analyzed by static nonlinear methods. It was found that the P Δ effect of tower components was small when the covered ice was uniformly distributed. The unbalanced wire loads on the tower would lead to twist effect when the covered ice was uneven distributed. The axial forces, moments at restraint nodes and the longest cantilever member were greatly affected by the P Δ effect, under which the unfavorable effect on the structure should be considered.     

Adaptive Inverse Control for Feed Water and Superheated Steam Temperature of Supercritical Pressure Boiler

An adaptive inverse control method for feed water and superheated steam temperature of supercritical pressure boiler is investigated. Through the analysis of the boiler system ,s dynamic characteristics, the input vector structure of inverse dynamics model of feed water and superheated steam temperature is constructed. The adaptive inverse control system is realized through on-line identification of inverse dynamic model with recursive least squares support vector machine. In the control process, the demand for feed water and spray water flow to the outlet steam temperature and micro-superheated steam temperature is considered to realize the integrated control of feed water and superheated steam temperature. Simulation results show that this control system has good control performance and adaptability and can void the repeated oscillation phenomena of control variables which appear in present two section control system.     

The impact of biological variation on postharvest behaviour: The case of dynamic temperature conditions

The postharvest handling chain is characterised by temperature conditions that are generally not constant throughout the chain. On top of this, postharvest research is dealing with large sources of biological variation. This paper outlines a general model approach of how to account for the propagation of biological variation when analysing experimental postharvest data gathered at dynamic temperature conditions. The proposed technique was applied to experimental data on colour change of tomatoes cv. ‘Tradiro’. The previously developed multivariate stochastic approach was combined with a transformation of real time into physiological time to account for the effect of dynamic temperature conditions. The developed model has the capability to describe the complex batch behaviour showing propagation of biological variation in tomato colour as a function of time and dynamically changing temperature during postharvest storage. This makes the current approach extremely suitable for application in real life situations when evaluating and optimising a logistic handling chain.     

Theoretical Contour Line of Reinforcement Bar of Non uniform Corrosion

Most of the previous studies on corrosion of the steel bar in reinforced concrete structures is based on the assumption that the bar is uniformly corroded. The actual measurement in projects proved that most of the reinforcement bar is in non uniform corrosion state. Based on electrochemical principles of metal corrosion and combined with the real corrosion course of the bar in concrete structures, a theoretical model of the contour line of reinforcement bar due to non uniform corrosion is established, through deducing the speed of corrosion and theoretical corrosion penetration and volume changes due to corrosion of reinforcement in general air at different position and different time. At the same time, the model is verified with the results from relative references and measured data.     

温室蝴蝶兰生长动态模型设计与实现

为了对温室蝴蝶兰生育过程的基本规律和量化关系有一个清楚的理解和认识,并对其生长系统的动态行为进行预测,从而辅助进行对蝴蝶兰生长和生产系统的适时合理调控,研究建立了以太阳辐射为基本驱动因子的温室蝴蝶兰生长发育动态模型,进一步开发出基于WindowsXP的计算机模拟系统。模型系统采用C++ Builder6.0语言编程技术,主要包括太阳辐射、碳同化、干物质分配等重要模块,可以输出干物质积累量、光合作用率、叶面积指数、叶片数与花朵数等参数变量,具有较完善的功能,模拟系统在界面和功能上能够达到较好的统一。对山东省济宁市农业高技术园区温室内蝴蝶兰进行模拟检验分析表明,模拟结果与实测结果符合较好,模型系统可以动态预测蝴蝶兰光合产物积累量等重要变量指标,研究认为该模型系统是研究蝴蝶兰生长发育特性及优化管理的重要工具。     

Using a genetic algorithm to optimize secondary cooling water distribution in slab casting

A genetic algorithm was used for coding the volume of cooling water in the secondary cooling zone based on the heat transfer model in real time production. This was done to improve the dynamic control of the secondary cooling water in high efficiency continuous casting. The fitness function of multi objective optimization in the algorithm is in accordance with the distribution of metallurgical criteria. The genetic algorithm was integrated with the metallurgical criteria and the heat transferring model to optimize the water distribution. These steps increase the distribution adaptability and improve its efficiency compared to the traditional optimization methods of solving multi objective optimization and other non linear problems. Simulation using the process data of the No.2 slab caster in the Steelmaking Plant of Panzhihua Iron and Steel and on site testing were carried out. The results show that the optimized distribution saves 2% of water than without optimization, while water distribution along the slab to the water gradually decreases in accordance with requirements for slab quality control.     

Simulation Modeling and Simulation Analysis for the Boiler Attached to 360 MW Unit

Using modular simulation technique,a mathematical model for the combustion and air/gas system of the W shape flame boiler is presented.The experimental resulats show that.The dynamic process accords with the mechanism process of the object.     

Extensive Noise Control Model for Plastic & Rubber Sulfuration and Simulation

For the problem of precision and real time control in the process of sulfuration,a new control model is put forward.All the noise existing in the sulfuration process are unified as one kind noise named as extensive noise,and the control system is self-adaptive in the process.The purpose of this strategy is to solve the problem preferred.The model comprises of two parts: one is Neutral Networks which deals with the advance sort,the other is dynamic self-adaptive system which is used to find the system's factors.The simulation result of dynamic self-adaptive system shows that this extensive noise controlled model is valid in the process.     

Design of a Motion Control System of Confocal Scanning Laser Microscope

A confocal scanning laser microscope is presented. Its motion control system is built with the DSP - based motion controller. The system worked on a double CPU structure that includes industrial control computer and motion controller, the system adopt friendly man - machine interface In the design of software. The systems tasks are divided into real - time tasks and no - real - time tasks. The lower computer deals with the real - time tasks such as position control and velocity control and the upper computer is used to deal with the non - real - time tasks. The system structure of con-focal scanning laser microscope and the constitute of motion control system as well as the software is introduced .     

基于阿里云的无土栽培营养液信息采集系统

为实现对无土栽培营养液中影响作物生长的各重要因子的精准测量与控制,笔者研制了一种基于阿里云的温室无土栽培营养液信息监测系统。该系统主要包括采集模块、控制模块、云平台和应用终端4个部分。首先利用传感器实时测量营养液的电导率、酸碱度、液温、液位和含氧量等影响因子信息,然后进行数据整合处理,并通过无线通信模块传送至控制模块及阿里云平台进行数据保存,最后通过Web端实时监控营养液各信息变化。研究结果表明,该系统能够实时准确监测营养液的信息,合理反馈供给作物所需营养液信息,达到功能设计要求,而且系统成本低,具有一定的实用价值。     

Dynamic Modeling and Simulation of 440 t/h Steam-cooled Cyclone Separator for CFB Boiler

A dynamic mathematical model of the steam-cooled cyclone separator in a 440 t/h CFB boiler has been established.Based on the mathematical model,simulation model of the cyclone separator is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.This model can provide a theoretical guidance for operation and optimal design of the cyclone separator.     

MPPT control of photovoltaic grid connected system

The high cost of grid connected photovoltaic (PV) system is an important reason that hinders its market application. The control cost can be partly cut down by using sensorless Maximum Power Point Tracking (MPPT). However, the sensorless MPPT control proposed by previous literatures has drawbacks of poor estimation accuracy, bad real time performance, and poor dynamic responses, which has great impact on the MPPT and the output performance of the whole system. Aiming at these problems, an Adaptive Sliding Mode Observer (ASMO) for estimation of photovoltaic array voltage is proposed. The external disturbance and modeling errors are suppressed while the real time performance and the estimation accuracy are improved greatly by the proposed method. The favorable performance of the output performance and MPPT performance of the PV system based on the ASMO are validated by simulation and experimental results.     

Real-time Supervisory Control System of Steam-injection Boiler

To guarantee the safety and reliability of steam-injection boiler, the real-time supervisory control system of steam-injection boiler is developed. This system consists of host computer and slave computer two levels system. The run parameters and run status of steam boiler are automatic supervisory with the host computer. The important parameters acquisition and manual adjustment to run parameters of steam boiler are accomplished by the slave computer. The practice proves the validity of this system.