Simulation of the persistence of atrazine in soil at different sites in Portugal

The effects of soil temperature and soil moisture content on the rates of degradation of atrazine, were measured in the laboratory in soils from different sites in Portugal. Persistence of atrazine was measured in the same soils in the field during the spring and summer of 1984, 1985, 1986 and 1987. Weather records from the different sites, measured during the periods of the field experi ments, were used in conjunction with appropriate constants derived from the laboratory data in a computer program to simulate persistence in the field. The model generally overestimated the ob served soil residues, particularly during the first 7–14 days after application. The fit from the model was good from day 14 to the end of the experiments.     

Enhanced degradation of atrazine under field conditions correlates with a loss of weed control in the glasshouse

Enhanced degradation of atrazine has been reported in the literature, indicating the potential for reduced residual weed control with this herbicide. Experiments were conducted to determine the field dissipation of atrazine in three cropping systems: continuous Zea mays L. (CC) receiving atrazine applications each year, Gossypium hirsutum L.-Z. mays rotation (CCR) receiving applications of atrazine once every 2 years and a no atrazine history soil (NAH). Subsequent laboratory and greenhouse experiments were conducted with soil collected from these cropping systems to determine atrazine degradation, mineralization and residual weed control. Field dissipation of atrazine followed first-order kinetics, and calculated half-life values for atrazine combined over 2003 and 2005 increased in the order of CC (9 d) = CCR (10 d) < NAH (17 d). Greenhouse studies confirmed that the persistence of atrazine was approximately twofold greater in NAH soil than in CC or CCR soil. Biometer flask mineralization studies suggested that enhanced degradation of atrazine was due to rapid catabolism of the s-triazine ring. Glasshouse efficacy studies revealed a loss of residual weed control in CC and CCR soil compared with NAH soil. These data indicate that, under typical Mississippi Delta field conditions and agronomic practices, the persistence of atrazine may be reduced by at least 50% if the herbicide is applied more than once every 24 months. Glasshouse studies suggest that under these conditions a loss of residual weed control is possible.     

Measurement and simulation of the movement and degradation of atrazine and metribuzin in a fallow soil

The movement and persistence of atrazine and metribuzin, in a sandy loam soil following application in spring, was simulated using two models. The first model, based on the physical laws describing water and solute movement and using measured values of soil hydraulic properties, underestimated herbicide mobility in the soil and predicted too rapid drying of the deeper soil layers. The accuracy of the simulations was improved by empirically reducing the measured hydraulic conductivities by a factor of 4. This probably reflects the difficulties of obtaining reliable measurements of soil hydraulic properties. A second and simpler model, which simulated water and herbicide movement using mobile and immobile water categories, accurately predicted soil water contents. It tended to underestimate herbicide movement at short times after application, and to overestimate movement later in the experiments. A comparison of different methods of simulating herbicide degradation showed that prediction of degradation rates in the field from laboratory data can be unsatisfactory with some compounds.     

Enhanced degradation of some soil-applied herbicides

In a field experiment involving repeated herbicide application, persistence of simazine was not affected by up to three previous doses of the herbicide. With propyzamide, there was a trend to more rapid rates of degradation with increasing number of previous treatments. Persistence of linuron and alachlor was affected only slightly by prior applications. In a laboratory incubation with soil from the field that had received four doses of the appropriate herbicide over a 12–month period, there was again no effect from simazine pretreatments on rates of loss. However, propyzamide, linuron and alachlor all degraded more rapidly in the previously treated than in similar untreated soil samples. Propyzamide, linuron, alachlor and napropamide degradation rates were all enhanced by a single pretreatment of soil in laboratory incubations, whereas degradation rates of isoproturon, metazachlor, atrazine and simazine were the same in pretreated and control soil samples.     

Testing MACRO (version 5.1) for pesticide leaching in a Dutch clay soil

Testing of pesticide leaching models against comprehensive field-scale measurements is necessary to increase confidence in their predictive ability when used as regulatory tools. Version 5.1 of the MACRO model was tested against measurements of water flow and the behaviour of bromide, bentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4(3H)-one-2,2-dioxide] and imidacloprid [1-(6-chloro-3-pyridylmethyl)-N-nitroimidazolidin-2-ylideneamine] in a cracked clay soil. In keeping with EU (FOCUS) procedures, the model was first calibrated against the measured moisture profiles and bromide concentrations in soil and in drain water. Uncalibrated pesticide simulations based on laboratory measurements of sorption and degradation were then compared with field data on the leaching of bentazone and imidacloprid. Calibrated parameter values indicated that a high degree of physical non-equilibrium (i.e. strong macropore flow) was necessary to describe solute transport in this soil. Comparison of measured and simulated bentazone concentration profiles revealed that the bulk of the bentazone movement in this soil was underestimated by MACRO. Nevertheless, the model simulated the dynamics of the bentazone breakthrough in drain water rather well and, in particular, accurately simulated the timing and the concentration level of the early bentazone breakthrough in drain water. The imidacloprid concentration profiles and its persistence in soil were simulated well. Moreover, the timing of the early imidacloprid breakthrough in the drain water was simulated well, although the simulated concentrations were about 2-3 times larger than measured. Deep groundwater concentrations for all substances were underestimated by MACRO, although it simulated concentrations in the shallow groundwater reasonably well. It is concluded that, in the context of ecotoxicological risk assessments for surface water, MACRO can give reasonably good simulations of pesticide concentrations in water draining from cracking clay soils, but that prior calibration against hydrologic and tracer data is desirable to reduce uncertainty and improve accuracy.     

Residualwirkung von Chlortriazin-Herbiziden im Boden an drei rumänischen Standorten. I. Prognose der Persistenz von Simazin und Atrazin im Boden

Residual effects of chlorotriazine herbicides in soil at three Rumanian sites. I. Prediction of the persistence of simazine and atrazine Persistence of simazine and atrazine in the top 10 cm soil was measured at three sites in Rumania with variations in climate and soil conditions. Both herbicides were applied at 1 and 3 kg ai ha^?1 to uncropped plots and to plots cropped with maize (Zea mays L.). Rates of residue decline were independent of application rate and crop cover but varied between sites. The time for 50% loss of atrazine varied from 36 to 68 days and that of simazine from 48 to 70 days. Laboratory studies were made with atrazine to characterize degradation rates under standard conditions and to measure adsorption and leaching behaviour in the different soils. Weather records for the periods of the field experiments were used in conjunction with appropriate constants derived from the laboratory results, or from data in the literature, in a computer program to simulate persistence in the field. Results from the model were in reasonable agreement with the observed soil residues although there was a tendency to overestimate rates of loss on some occasions. The results suggest that the model of persistence was sufficiently accurate for practical purposes, and that its use could preclude the need for extensive analytical measurements of residues.     

Evaluation of three pesticide leaching models with experimental data for alachlor, atrazine and metribuzin

The persistence and movement of residues of alachlor, alrazine and metribuzin were measured in a mini-lysimeter system in the field. This comprised a number of soil columns (11 cm diametert; 30 cm long), and permitted the vertical distribution of residues to be determined at. intervals alter application and the collection and analysis of leaehale water. Laboratory experiments were also performed to determine the degradation rates of the three herbicides and their strengths of adsorption by the test soil. The results showed an order of degradation rate of metribuzin> alachlor>atrazine and an order of adsorption of alacblor>atrazine>melribuzin. Movement of residues in the soil columns and concentrations in the leachate were inversely related to the strength of adsorption. Parameters derived from the laboratory data were used in conjunction with weather data for the period of the field experiment in three mathematical models of pesticide leaching: VARLEACH, LEACHP and PRZM2. In most instances, the models gave acceptable predictions of the distribution of residues in soil. This was particularly so for the less mobile compound alachlor. With the most mobile compound, metribuzin, residues were not well predicted at the later sampling dates. All three models gave accurate predictions of the volumes of drainage water, but none of them predicted the concentrations of herbicide in the leachate, presumably because they do not take account of preferential flow pathways of water and solute in the soil.     

莠去津在土壤中的残留动态和淋溶动态

利用HPLC法对土壤中莠去津的残留动态、淋溶动态进行了研究。结果显示,莠去津以有效成分2.25 kg/hm2和4.50 kg/hm2的剂量施用时,在土壤中的半衰期分别为19.1 d和18.1 d,即其半衰期与莠去津的施用浓度无关,属于典型的一级动力学反应。在120 d的玉米生长期中,土壤中莠去津在不断降解代谢的同时,逐渐向深层土壤中淋溶,多数莠去津持留在表层土壤中。施用莠去津27 d后,高浓度处理小区莠去津的淋溶深度超过30 cm,深度为10~15 cm处的土壤在施用后27 d莠去津的浓度最大。同一土壤深度,莠去津在高浓度处理小区的残留量要远高于低浓度处理小区。这些结果显示,减小莠去津的用量可以减少莠去津在土壤中的移动,表明低剂量施用莠去津是保护地下水免受污染的一种有效措施。影响莠去津的淋溶作用的主要因素包括使用量和土壤的理化特性。     

Simulation of atrazine persistence in Spanish soils

The persistence of atrazine was monitored in three fields at different sites in Spain during two consecutive years (1990 and 1991). Laboratory assays for determining the influence of temperature and soil moisture content on the rate of herbicide degradation were carried out on soil samples from the same fields. The degradation constants derived from these assays, together with weather records for the period of the field experiments, were used in a computer program which simulated herbicide persistence in the field. Some adjustments were made to adapt the model to Spanish conditions. The model predicted with reasonable accuracy the persistence of the herbicide in two soils, although there was a tendency to overestimate the residues at early dates. Discrepancies between predicted and measured residues were greater in the third soil, due to rapid initial losses that were not predicted by the program. In this case, the agreement was improved if the program was run taking time zero to be one month after herbicide application. Possible reasons for these discrepancies are discussed.     

Spatial variability in 14C-herbicide degradation in surface and subsurface soils

The spatial variability in mineralization of atrazine, isoproturon and metamitron in soil and subsoil samples taken from a 135-ha catchment in north France was studied. Fifty-one samples from the top layer were taken to represent exhaustively the 31 agricultural fields and 21 soil types of the catchment. Sixteen additional samples were collected between depths of 0.7 and 10 m to represent the major geological materials encountered in the vadose zone of the catchment. All these samples were incubated with 14C-labelled atrazine under laboratory conditions at 28 degrees C. Fourteen selected surface samples which exhibited distinctly different behaviour for atrazine dissipation (including sorption and mineralization) were incubated with 14C-isoproturon and 14C-metamitron. Overall soil microbial activity and specific herbicide degradation activities were monitored during the incubations through measurements of total carbon dioxide and 14C-carbon dioxide respectively. At the end of the incubations, extractable and non-extractable (bound) residues remaining in soils were measured. Variability of herbicide dissipation half-life in soil surface samples was lower for atrazine and metamitron (CV < 12%) than for isoproturon (CV = 46%). The main contributor to the isoproturon dissipation variability was the variability of the extractable residues. For the other herbicides, spatial variability was mainly related to the variability of their mineralization. In all cases, herbicide mineralization half-lives showed higher variability than those of dissipation. Sorption or physicochemical soil properties could not explain atrazine and isoproturon degradation, whose main factors were probably directly related to the dynamics of the specific microbial degradation activity. In contrast, variability of metamitron degradation was significantly correlated to sorption coefficient (K(d)) through correlation with the sorptive soil components, organic matter and clay. Herbicide degradation decreased with depth as did the overall microbial activity. Atrazine mineralization activity was found down to a depth of 2.5 m; beyond that, it was negligible.     

Modeling hydrology, metribuzin degradation and metribuzin transport in macroporous tilled and no-till silt loam soil using RZWQM

Due to the complex nature of pesticide transport, process-based models can be difficult to use. For example, pesticide transport can be effected by macropore flow, and can be further complicated by sorption, desorption and degradation occurring at different rates in different soil compartments. We have used the Root Zone Water Quality Model (RZWQM) to investigate these phenomena with field data that included two management conditions (till and no-till) and metribuzin concentrations in percolate, runoff and soil. Metribuzin degradation and transport were simulated using three pesticide sorption models available in RZWQM: (a) instantaneous equilibrium-only (EO); (b) equilibrium-kinetic (EK, includes sites with slow desorption and no degradation); (c) equilibrium-bound (EB, includes irreversibly bound sites with relatively slow degradation). Site-specific RZWQM input included water retention curves from four soil depths, saturated hydraulic conductivity from four soil depths and the metribuzin partition coefficient. The calibrated parameters were macropore radius, surface crust saturated hydraulic conductivity, kinetic parameters, irreversible binding parameters and metribuzin half-life. The results indicate that (1) simulated metribuzin persistence was more accurate using the EK (root mean square error, RMSE = 0.03 kg ha(-1)) and EB (RMSE = 0.03 kg ha(-1)) sorption models compared to the EO (RMSE = 0.08 kg ha(-1)) model because of slowing metribuzin degradation rate with time and (2) simulating macropore flow resulted in prediction of metribuzin transport in percolate over the simulation period within a factor of two of that observed using all three pesticide sorption models. Moreover, little difference in simulated daily transport was observed between the three pesticide sorption models, except that the EB model substantially under-predicted metribuzin transport in runoff and percolate >30 days after application when transported concentrations were relatively low. This suggests that when macropore flow and hydrology are accurately simulated, metribuzin transport in the field may be adequately simulated using a relatively simple, equilibrium-only pesticide model.     

The ability of indigenous micro-organisms to degrade isoproturon, atrazine and mecoprop within aerobic UK aquifer systems

The potential for the herbicides isoproturon, atrazine and mecoprop to degrade in the major UK aquifers of chalk, sandstone and limestone was studied using laboratory microcosms spiked at 100 microg litre(-1). Significant mecoprop degradation was only observed in sandstone groundwater samples. Atrazine transformation, based on the formation of metabolites, did occur in most groundwater samples, but only at a rate of 1-3% per year. A potential to degrade isoproturon was observed in groundwater samples from each of the aquifer types, with the most rapid and consistent degradation occurring at the sandstone field site. Biodegradation was confirmed by the formation of monodesmethyl- and didesmethyl-isoproturon. Isoproturon degradation potential rates obtained from the groundwater microcosms could not be correlated with either dissolved organic carbon or numbers of bacteria in the groundwater. It was noted that the ability of the groundwater at a field site to degrade a pesticide was not related to performance of the soil above.     

From laboratory to field: uses and limitations of pesticide behaviour models for the soil/plant system

Modelling is an economic way of assessing pesticide behaviour under field conditions; it is cheaper and faster than field experiments. Modelling attempts to generalize knowledge of pesticide field behaviour through identification of the most important pesticide/soil properties that can be measured in the laboratory. The technology to simulate volatilization of volatile pesticides that are incorporated or injected into the soil is well developed. However, modelling of volatilization rates from plant and soil surfaces before the first significant rainfall event after application is barely possible with current knowledge. The technology to simulate pesticide persistence in the plough layer is well developed; the PERSIST model has been tested at least 178 times, usually resulting in a slightly faster decline in the field than was simulated. In general, available pesticide leaching models are reliable enough to assess the leaching of the bulk of the dose (leaching levels above 1%). The EU drinking water limit of 0.1 μg L^?1 implies leaching of less than 0.1% of a dose of 1 kg ha^?1. At such a low leaching level, the validation status of the models is still low, mainly because preferential flow processes in both structured and unstructured soils and the factors controlling the transformation rate in subsoil are not well enough understood.     

Simulation of the persistence of atrazine, linuron and metolachlor in soil at different sites in the USA

The effects of soil temperature and soil moisture content on the rates of degradation of atrazine, linuron and metolachlor were measured in the laboratory in soil from different sites in the USA. Persistence of the herbicides was measured in the same soils in the field during the summers of 1978 and 1979. Weather records from the different sites for the periods of the field experiments were used in conjunction with appropriate constants derived from the laboratory data in a computer program to simulate persistence in the field. There was a general tendency for the model to overestimate the observed soil residues. For example, with atrazine, 40 of the 48 measured residues were lower than those predicted by the model; seven were more than 30% below and two were more than 50% below. With metolachlor, 16 of the 48 measured residues were more than 30% below those predicted and six were more than 50% below; almost identical results were obtained with linuron. When the model overestimated late-season residues by a large amount, the discrepancies between predicted and observed data were usually apparent from early in the experiment. Possible reasons for the discrepancies are discussed.     

Herbicide leaching as affected by macropore flow and within-storm rainfall intensity variation: a RZWQM simulation

Within-event variability in rainfall intensity may affect pesticide leaching rates in soil, but most laboratory studies of pesticide leaching use a rainfall simulator operating at constant rainfall intensity, or cover the soil with ponded water. This is especially true in experiments where macropores are present--macroporous soils present experimental complexities enough without the added complexity of variable rainfall intensity. One way to get around this difficulty is to use a suitable pesticide transport model, calibrate it to describe accurately a fixed-intensity experiment, and then explore the affects of within-event rainfall intensity variation on pesticide leaching through macropores. We used the Root Zone Water Quality Model (RZWQM) to investigate the effect of variable rainfall intensity on alachlor and atrazine transport through macropores. Data were used from an experiment in which atrazine and alachlor were surface-applied to 30 x 30 x 30 cm undisturbed blocks of two macroporous silt loam soils from glacial till regions. One hour later the blocks were subjected to 30-mm simulated rain with constant intensity for 0.5 h. Percolate was collected and analyzed from 64 square cells at the base of the blocks. RZWQM was calibrated to describe accurately the atrazine and alachlor leaching data, and then a median Mid-west variable-intensity storm, in which the initial intensity was high, was simulated. The variable-intensity storm more than quadrupled alachlor losses and almost doubled atrazine losses in one soil over the constant-intensity storm of the same total depth. Also rainfall intensity may affect percolate-producing macroporosity and consequently pesticide transport through macropores. For example, under variable rainfall intensity RZWQM predicted the alachlor concentration to be 2.7 microg ml(-1) with an effective macroporosity of 2.2 E(-4) cm(3) cm(-3) and 1.4 microg ml(-1) with an effective macroporosity of 4.6 E(-4) cm(3) cm(-3). Percolate-producing macroporosity and herbicide leaching under different rainfall intensity patterns, however, are not well understood. Clearly, further investigation of rainfall intensity variation on pesticide leaching through macropores is needed.     

Modelling approaches to compare sorption and degradation of metsulfuron-methyl in laboratory micro-lysimeter and batch experiments

Results of laboratory batch studies often differ from those of outdoor lysimeter or field plot experiments--with respect to degradation as well as sorption. Laboratory micro-lysimeters are a useful device for closing the gap between laboratory and field by both including relevant transport processes in undisturbed soil columns and allowing controlled boundary conditions. In this study, sorption and degradation of the herbicide metsulfuron-methyl in a loamy silt soil were investigated by applying inverse modelling techniques to data sets from different experimental approaches under laboratory conditions at a temperature of 10 degrees C: first, batch-degradation studies and, second, column experiments with undisturbed soil cores (28 cm length x 21 cm diameter). The column experiments included leachate and soil profile analysis at two different run times. A sequential extraction method was applied in both study parts in order to determine different binding states of the test item within the soil. Data were modelled using ModelMaker and Hydrus-1D/2D. Metsulfuron-methyl half-life in the batch-experiments (t1/2 = 66 days) was shown to be about four times higher than in the micro-lysimeter studies (t1/2 about 17 days). Kinetic sorption was found to be a significant process both in batch and column experiments. Applying the one-rate-two-site kinetic sorption model to the sequential extraction data, it was possible to associate the stronger bonded fraction of metsulfuron-methyl with its kinetically sorbed fraction in the model. Although the columns exhibited strong significance of multi-domain flow (soil heterogeneity), the comparison between bromide and metsulfuron-methyl leaching and profile data showed clear evidence for kinetic sorption effects. The use of soil profile data had significant impact on parameter estimates concerning sorption and degradation. The simulated leaching of metsulfuron-methyl as it resulted from parameter estimation was shown to decrease when soil profile data were considered in the parameter estimation procedure. Moreover, it was shown that the significance of kinetic sorption can only be demonstrated by the additional use of soil profile data in parameter estimation. Thus, the exclusive use of efflux data from leaching experiments at any scale can lead to fundamental misunderstandings of the underlying processes.     

Measured and simulated behaviour of oxamyl in fallow soils

The movement and breakdown of the insecticide and nematicide oxamyl was monitored in fallow sandy loam soils under field conditions. Using measurements of rainfall and evaporation from a water surface, the water flow in soil was simulated by a computer model, and the results were compared with the measured soil-moisture profiles. The model was extended to simulate the behaviour of oxamyl, using laboratory data for adsorption and rates of degradation in soil. The model generally underestimated oxamyl movement in the first month, whereas it tended to overestimate later movement. The rate of breakdown of oxamyl, as affected by soil type, temperature and soil-moisture content, was fairly well described. After about 2 months only small amounts of oxamyl remained. Accumulation of oxamyl near the soil surface in dry periods was overestimated, indicating deficiencies in the modelling procedure under these conditions.