Stability of isoflavones in soy milk stored at elevated and ambient temperatures

Soy isoflavones are widely recognized for their potential health benefits. The increased use of traditional and new food products calls for the assessment of their stability during processing and storage. The present study examines the stability of genistein and daidzein derivatives in soy milk. Soy milk was stored at ambient and elevated temperatures, and the change in isoflavone concentration was monitored with time. Genistin loss in time showed typical first-order kinetics, with rate constants ranging from 0.437-3.871 to 61-109 days(-1) in the temperature ranges of 15-37 and 70-90 degrees C, respectively. The temperature dependence of genistin loss followed the Arrhenius relation with activation energies of 7.2 kcal/mol at ambient temperatures and 17.6 kcal/mol at elevated temperatures. At early stages of soy milk storage at 80 and 90 degrees C, the 6' '-O-acetyldaidzin concentration increased, followed by a slow decrease. The results obtained in this study can serve as a basis for estimating the shelf life of soy milk as related to its genistin content.     

Kinetics of maneb degradation during thermal treatment of tomatoes

The kinetics of maneb degradation in tomato homogenates at high temperatures and at two pH values (4 and 9) and the rate of formation of the toxic metabolite, ethylenethiourea (ETU), were studied. Maneb was measured as carbon disulfide by headspace gas-chromatography and ETU by high-performance liquid chromatography with photodiode array detection. First-order kinetics adequately described the degradation of maneb in tomato homogenates. The degradation rate constants exhibited an Arrhenius temperature dependence in the range from 50 to 90 degrees C and the apparent activation energy (E(a)) was calculated to be 36 KJ mol(-1) in homogenates with natural pH (4). Raising temperature from 60 to 75 and to 90 degrees C, ETU formation was significantly increased. Interestingly, the selectivity toward ETU showed a downward trend when the total conversion increased at longer heating times. When the pH of the tomato homogenates was adjusted to 9, the degradation of maneb proceeded faster at both 60 and 90 degrees C. The combination of alkaline pH and the highest temperature (90 degrees C) resulted in the maximum ETU conversion rates. The results of the present study on the fate of maneb and ETU residues during tomato processing, may prove valuable in estimating potential risk from dietary exposure.     

Hydrolysis kinetics of fenthion and its metabolites in buffered aqueous media

This study investigates the hydrolysis kinetics of fenthion and its five oxidation metabolites in pH 7 and pH 9 buffered aqueous media at 25, 50, and 65 degrees C. Five metabolites and three hydrolysis products were synthesized and purified. The reactant and the corresponding hydrolysis products were determined by HPLC. Rate constant and half-life studies revealed that fenthion and its metabolites were relatively stable in neutral media, and their stability decreased as pH increased. The half-lives at 25 degrees C ranged from 59.0 days for fenthion to 16.5 days for fenoxon sulfone at pH 7, and from 55.5 days for fenthion to 9.50 days for fenoxon sulfone at pH 9; half-lives were greatly reduced at elevated temperatures. The activation energy (E(a)) was found to range from 16.7 to 22.1 kcal/mol for the compounds investigated. The phenol hydrolysis product of fenthion and fenoxon, 3-methyl-4-methylthiophenol was not stable in pH 7 and pH 9 buffered solutions at 50 degrees C, whereas 3-methyl-4-methylsulfonylphenol and 3-methyl-4-methylsulfinylphenol were relatively stable under the same conditions. At pH 9, the primary hydrolysis mechanisms of fenthion and its oxidation metabolites were combination of hydroxide ion and neutral water molecule attacking on the P atom to form corresponding phenol derivatives. Under neutral conditions, the primary hydrolysis mechanisms of fenthion and its oxidation metabolites were assumed to be the combination of water molecule attacking on the P atom to form phenol derivatives and on the C atom to yield dealkylation products.     

Kinetics and mechanism of cymoxanil degradation in buffer solutions

The kinetics and mechanism(s) of the hydrolytic degradation of a compound are needed to evaluate a compound's abiotic degradation in the environment. In this paper, the hydrolysis of cymoxanil [2-cyano-N-[(ethylamino)carbonyl]-2-(methoxyimino) acetamide] was investigated in dark sterile aqueous solutions under a variety of pH conditions (pH 2.8-9.2) and temperatures (15-50 degrees C). Hydrolysis of cymoxanil was described by first-order kinetics, which was dependent on pH and temperature. Cymoxanil degraded rapidly at pH 9 (half-life = 31 min) and relatively slowly at pH 2.8 (half-life = 722 days). The effect of temperature on the rate of cymoxanil degradation was characterized using the Arrhenius equation with an estimated energy of activation of 117.1 kJ mol(-)(1). An increase in temperature of 10 degrees C resulted in a decrease in half-life by a factor of approximately 5. Three competing degradation pathways are proposed for the hydrolysis of cymoxanil, with two of the pathways accounting for approximately 90% of cymoxanil degradation. These two pathways involved either initial cyclization to 1-ethyldihydro-6-imino-2,3,5(3H)-pyrimidinetrione-5-(O-methyloxime) (1, Figure 1) or direct cleavage of the C-1 amide bond to form cyano(methoxyimino) acetic acid (7). The third pathway of degradation involved initial cyclization to 3-ethyl-4-(methoxyimino)-2,5-dioxo-4-imidazolidinecarbonitrile (8), which rapidly degrades into 1-ethyl-5-(methoxyimino)-2,4-imidazoline-2,4-dione (9). All three pathways eventually lead to the formation of the polar metabolite oxalic acid.     

Alkamide stability in Echinacea purpurea extracts with and without phenolic acids in dry films and in solution

Degradation of the major alkamides in E. purpurea extracts was monitored under four different accelerated storage conditions, phenolic-depleted and phenolic-rich dry E. purpurea extracts and phenolic-depleted and phenolic-rich DMSO E. purpurea extracts at 70, 80, and 90 degrees C. Degradation of alkamides followed apparent first-order reaction rate kinetics. Alkamides degraded faster in dry films than in DMSO solution. The phenolic acids acted as antioxidants by limiting the loss of the alkamides in dry E. purpurea extracts. In contrast, E. purpurea alkamides in DMSO degraded faster when the phenolic fraction was absent. The overall order of degradation rate constants was alkamides 1 approximately 2 approximately 6 > 9 approximately 8 > 3 approximately 5 approximately 7. The energy of activation (Ea) predicted for alkamide degradation averaged 101 +/- 12 kJ/mol in dry films +/- phenolic acids, suggesting the oxidation mechanism was the same under both conditions. In DMSO solutions, Ea values were about one-half of those in dry films (61 +/- 14 kJ/mol), suggesting a different mechanism for alkamide oxidation in solution compared to dry. Predicted half-lives for alkamides in extracts suggested very good stability.     

Degradation kinetics of the antioxidant additive ascorbic acid in packed table olives during storage at different temperatures

The kinetics of ascorbic acid (AA) loss during storage of packed table olives with two different levels of added AA was investigated. Three selected storage temperatures were assayed: 10 degrees C, ambient (20-24 degrees C), and 40 degrees C. The study was carried out in both pasteurized and unpasteurized product. The effect of pasteurization treatment alone on added AA was not significant. In the pasteurized product, in general AA degraded following a first-order kinetics. The activation energy calculated by using the Arrhenius model averaged 9 kcal/mol. For each storage temperature, the increase in initial AA concentration significantly decreased the AA degradation rate. In the unpasteurized product, AA was not detected after 20 days in samples stored at room temperature and AA degradation followed zero-order kinetics at 10 degrees C, whereas at 40 degrees C a second-order reaction showed the best fit. In both pasteurized and unpasteurized product, the low level of initial dehydroascorbic acid disappeared during storage. Furfural appeared to be formed during storage, mainly at 40 degrees C, following zero-order kinetics.     

Degradation of malathion, in aqueous extracts of asparagus (Asparagus officinalis)

Malathion was incubated in water extracts of vegetables at various temperatures and pH, and the amount of malathion present over time was analyzed by a gas chromatograph with a flame photometric detector. Malathion was degraded to a nondetectable level in a 1% asparagus extract incubated at pH 7.4 and 37 degrees C for 4 h. Carrot extract showed the second highest rate of malathion degradation (76%), followed by kale extract (23.7%), spinach extract (9.7%), and broccoli extract (1.5%) under the same conditions. The highest degradation rates of malathion were observed at 37 degrees C, when three different temperatures were tested (5, 25, and 37 degrees C) at pH 7.4. Rate constants were 0.134 min(-)(1) from a 1% asparagus solution and 0.095 min(-)(1) from a 0.5% asparagus solution. The highest degradation rate of malathion was achieved at pH 9 among the pHs tested (pH 4, 7.4, and 9) in a 0.5% asparagus solution. The 0.5% asparagus solution degraded dicarboxylic acid esters by almost 100% for dimethyl succinate and diethyl adipate, by 64% for diethyl acetyl succinate, and 30% for diethyl benzyl malonate when incubated at pH 9 for 20 min. The results support the hypothesis that the enzyme that degrades malathion in the asparagus solutions is a carboxylesterase.     

Stabilities of daidzin,glycitin, genistin,and generation of derivatives during heating

The soy isoflavones daidzin, glycitin, and genistin were purified from defatted soy flour using preparative-scale reverse-phase HPLC. The stabilities of the three isoflavones at different heating temperatures were investigated. Daidzin, glycitin, and genistin were lost at a rate of 26, 27, and 27% of their original concentration, respectively, after 3 min at 185 degrees C. At 215 degrees C, decreases of daidzin, glycitin, and genistin were 65, 98, and 74% after 3 min and 91, 99, and 94% after 15 min, respectively. The order of the thermal stabilities, from lowest to highest, was glycitin, genistin, and daidzin. Acetyl daidzin and acetyl genistin, daidzein, glycitein, and genistein were produced during heating at temperatures above 135 degrees C. The rate of binding of an acetyl group to form acetyl daidzin and acetyl genistin from daidzin and genistin was higher than the rate of loss of a glucoside group to form daidzein and genistein. However, acetyl daidzin and acetyl genistin decreased sharply at temperatures above 200 degrees C, while daidzein, glycitein, and genistein were relatively stable over 30 min. The stability of daidzein was higher than that of glycitein or genistein.     

Thermal degradation kinetics of bixin in an aqueous model system

The kinetics of the thermal degradation of the natural cis carotenoid bixin in a water/ethanol (8:2) solution was studied as a function of temperature (70-125 degrees C), using high-performance liquid chromatography. The curves for the decay of bixin and formation of products (e.g., di-cis and all-trans isomers and a C17 degradation compound) did not adjust well to a first-order rate law, but very good fits were obtained using a biexponential model. This mathematical modeling gave the rate constant values for the formation of the primary products from bixin, and the energy barrier for each step was obtained. The di-cis isomers were formed immediately (15 kcal/mol) together with the decay of bixin, followed by a slow consumption, indicating their role as reaction intermediates. In fact, the di-cis isomers could easily revert to bixin (Ea approximately 3 kcal/mol) or yield the primary C17 degradation product, with an energy barrier of 6.5 kcal/mol. In turn, 24 kcal/mol was necessary for the Bix --> all-trans step, explaining its slower formation.     

Model studies on the stability of folic acid and 5-methyltetrahydrofolic acid degradation during thermal treatment in combination with high hydrostatic pressure

Stability of folic acid and 5-methyltetrahydrofolic acid in phosphate buffer (0.2 M; pH 7) toward thermal (above 65 degrees C) and combined high pressure (up to 800 MPa)/thermal (20 up to 65 degrees C) treatments was studied on a kinetic basis. Residual folate concentration after thermal and high pressure/thermal treatments was measured using reverse phase liquid chromatography. The degradation of both folates followed first-order reaction kinetics. At ambient pressure, the estimated Arrhenius activation energy (E(a)) values of folic acid and 5-methyltetrahydrofolic acid thermal degradation were 51.66 and 79.98 kJ mol(-1), respectively. It was noticed that the stability of folic acid toward thermal and combined high pressure thermal treatments was much higher than 5-methyltetrahydrofolic acid. High-pressure treatments at room temperature or higher (up to 60 degrees C) had no or little effect on folic acid. In the whole P/T area studied, the rate constant of 5-methyltetrahydrofolic acid degradation was enhanced by increasing pressure, and a remarkable synergistic effect of pressure and temperature on 5-methyltetrahydrofolic acid degradation occurred at temperatures above 40 degrees C. A model to describe the combined pressure and temperature effect on the 5-methyltetrahydrofolic acid degradation rate constant is presented.     

Kinetics of acid hydrolysis of water-soluble spruce O-acetyl galactoglucomannans

Water-soluble O-acetyl galactoglucomannan (GGM) is a softwood-derived polysaccharide, which can be extracted on an industrial scale from wood or mechanical pulping waters and now is available in kilogram scale for research and development of value-added products. To develop applications of GGM, information is needed on its stability in acidic conditions. The kinetics of acid hydrolysis of GGM was studied at temperatures up to 90 degrees C in the pH range of 1-3. Molar mass and molar mass distribution were determined using size exclusion chromatography with multiangle laser light scattering and refractive index detection. The molar mass of GGM decreased considerably with treatment time at temperatures above 70 degrees C and pH below 2. The molar mass distribution broadened with hydrolysis time. A first-order kinetic model was found to match the acid hydrolysis. The reaction rate constants at various pH values and temperatures were calculated on the basis of the first-order kinetic model. Furthermore, the activation energy, E, was obtained from the Arrhenius plot. The activation energy E was 150 kJ mol (-1) for acid hydrolysis of spruce GGM. The apparent rate constant during acid hydrolysis increased by a factor of 10 with a decrease in pH by 1 unit, regardless of temperature. In addition, gas chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were applied to study the released GGM monomers and oligomers.     

Hydrolytic products and kinetics of triazophos in buffered and alkaline solutions with different values of pH

The hydrolysis of triazophos was studied in buffered solutions in the range of pH 4-10 and in sodium hydroxide solutions with pH values up to 12. The results showed that the degradation of triazophos in the above solutions followed simple pseudo-first-order kinetics. At 35 degrees C, the rate constants in buffered solutions ranged from 0.0222 d(-1) at pH 4 to 0.5357 d(-1) at pH 10, and increased to 0.6251 h(-1) in 0.01 mol/L sodium hydroxide solution. The results also indicated that the base-catalysis was more important than acid-catalysis in the hydrolysis of triazophos. On the basis of the Arrhenius plot, the calculated activation energy (E(a)) and the frequency factor (A) for the hydrolysis of triazophos in buffered solution of pH 10 were 78.6 kJ/mol and 1.13 x 10(13) d(-1), respectively. Hydrolytic products of triazophos in buffered solutions of pH 4 and 10, as well as in sodium hydroxide solution of pH 11, were identified as their corresponding trimethylsilyl derivatives with a gas chromatography-mass spectrometer (GC-MS). The possible hydrolytic pathways of triazophos were also proposed.     

Changes in the profile of genistein, daidzein, and their conjugates during thermal processing of tofu.

Profiles of genistein, daidzein, genistin, daidzin, and their acetyl- and malonyl-beta-glycosides were determined in tofu as affected by temperature and time. Tofu was heated in water at 80, 90, and 100 degrees C for 0 (control), 10, 20, 30, and 40 min, and the contents of the isoflavones of interest were quantified using reversed-phase HPLC. Total isoflavone content decreased most likely due to leaching of isoflavones into the water. Because the content of the isoflavones of the genistein series was little affected by the treatments, the decrease in the total isoflavone content was almost exclusively due to a decrease of the daidzein series. Changes in the profile of the daidzein series suggest little decarboxylation of the malonylglycoside to the acetylglycoside, but considerable de-esterification of the malonyl- and acetylglycoside to the beta-glucoside. Strongly temperature dependent decreases of the aglycon suggest possible thermal degradation of daidzein in addition to losses due to leaching.     

Effects of caseins on thermal stability of bovine beta-lactoglobulin

Casein fractions have been shown to act as molecular chaperones and inhibit aggregation of whey proteins in dilute solutions (< or =1% w/v). We evaluated if this approach would stabilize protein solutions at higher concentration and thermal processing temperatures desired for beverage applications. Mixtures of beta-lactoglobulin (BLG) (6% w/v) with either beta-casein (BCN) (0.01-2% w/v) or alpha s-casein (ACN) (2% w/v) were adjusted to pH 6.0 and heated (70-90 degrees C) for 20 min, cooled, and then analyzed to determine the degree of aggregation. Aggregation was determined by solution turbidity as optical density (OD) at 400 or 600 nm. The addition of 0.05% (w/v) BCN or greater caused a drop in turbidity for solutions heated at 70-90 degrees C. In contrast, inhibition was observed in BLG-ACN mixtures at 70 degrees C but not at > or =75 degrees C. Moreover, prolonged heating (90 min) of BLG with 2% (w/v) BCN (pH 6.0) at 90 degrees C produced a clear solution while BLG-ACN solutions formed translucent gels after heating for 15 min. The weight-averaged molar mass and root-mean-square (rms) radius of soluble aggregates were determined by size exclusion chromatography in conjunction with multiangle laser light scattering (SEC-MALS). SEC-MALS confirmed the turbidity results by showing that the BLG-BCN mixture (8% w/v protein) produced aggregates with lower molar mass and smaller rms radius (majority 20-40 nm). These results showed that BCN is a feasible component to stabilize higher concentrations of whey proteins in beverages.     

Comparative study on pressure and temperature stability of 5-methyltetrahydrofolic acid in model systems and in food products

A comparative study on the pressure and temperature stability of 5-methyltetrahydrofolic acid (5-CH(3)-H(4)folate) was performed in model/buffer systems and food products (i.e., orange juice, kiwi puree, carrot juice, and asparagus). Effects of pH and ascorbic acid (0.5 mg/g) on 5-CH(3)-H(4)folate stability in buffer systems were studied on a kinetic basis at different temperatures (from 65 to 160 degrees C) and different pressure/temperature combinations (from 100 to 700 MPa/from 20 to 65 degrees C). These studies showed that (i) the degradation of 5-CH(3)-H(4)folate in all model systems could be described by first-order reaction kinetics, (ii) the thermostability of 5-CH(3)-H(4)folate was enhanced by increasing pH up to 7, (iii) 5-CH(3)-H(4)folate was relatively pressure stable at temperatures lower than 40 degrees C, and (iv) ascorbic acid enhanced both the thermo- and barostabilities of 5-CH(3)-H(4)folate. In food products, temperature and pressure stabilities of 5-CH(3)-H(4)folate were studied at different temperatures (70-120 degrees C) and different pressure/temperature combinations (from 50 to 200 MPa/25 degrees C and 500 MPa/60 degrees C). 5-CH(3)-H(4)folate in orange juice and kiwi puree was relatively temperature (up to 120 degrees C) and pressure (up to 500 MPa/60 degrees C) stable in contrast to carrot juice and asparagus. Addition of ascorbic acid (0.5 mg/g) in carrot juice resulted in a remarkable protective effect on pressure (500 MPa/60 degrees C/40 min) and temperature degradation (120 degrees C/40 min) of 5-CH(3)-H(4)folate.     

Kinetics of chlorophyll degradation and color loss in heated broccoli juice

Degradation of chlorophyll in broccoli juice occurred at temperatures exceeding 60 degrees C. Chemical analysis revealed that degradation of chlorophyll a and b to pheophytin a and b, respectively, followed first-order kinetics and that chlorophyll a was more heat sensitive than chlorophyll b. Temperature dependencies of chlorophyll a and b degradation rate constants could be described by Arrhenius equations with activation energies (E(a)) of 71.04 +/- 4.89 and 67.11 +/- 6.82 kJ/mol, respectively. Objective greenness measurements, using the -a value as the physical property, together with a fractional conversion kinetic analysis, indicated that green color degradation followed a two-step process. Kinetic parameters for the first degradation step were in accordance with the kinetic parameters for pheophytinization of the total chlorophyll content, as determined by chemical analysis (E(a) approximately 69 kJ/mol). The second degradation step, that is, the subsequent decomposition of pheophytins, was characterized by an activation energy of 105.49 +/- 4.74 kJ/mol.     

Kinetics of interaction of vanillin with amino acids and peptides in model systems

Model systems were used to study the reaction kinetics of vanillin and pentalysine, lysine, glutathione, cysteine, aspartame, or phenylalanine (molar ratio 1:1) in phosphate buffer. The buffer pH was adjusted to the pK(a)(2) of the available alpha-amino group of each amino acid or peptide. Reductions of vanillin followed first-order kinetics at 55, 65, and 75 degrees C in the presence of each of the amino acids or peptides used. The reaction rates were accelerated as the temperature increased. The rate constants were highest for pentalysine followed by lysine, phenylalanine, glutathione/cysteine, and aspartame. The reduction of phenylalanine followed first-order kinetics, whereas the formation of its reaction product followed zero-order kinetics. The activation energy (E(a)) for the reaction ranged from 5.6 to 14.5 kcal/mol.     

Enhancement of tofu isoflavone recovery by pretreatment of soy milk with koji enzyme extract

Isoflavones are novel nutraceutical constituents of soybeans, but considerable amounts are lost in the whey during conventional tofu manufacturing. In this study, in a small-scale process, 2 mL of koji enzyme extract (soybean koji/deionized water, 1/3, w/v) was combined with 600 mL of soy milk, and 30 mL aliquots were incubated at 35 degrees C for 0, 30, 60, 120, and 300 min, for enzyme pretreatment. After each treatment time, soy milk was heated to 85 degrees C, CaSO4 was added to aggregate protein, and the mixture was centrifuged to separate the solids (tofu) from the whey. The tofu yield and moisture contents from soy milk treated for 30 or 60 min were higher than those from soy milk treated for 0 (control), 120, or 300 min. The protein content of freeze-dried tofu varied in a limited range, and native PAGE and SDS-PAGE patterns revealed slight quantitative and qualitative variations among products. Soy milk daidzein and genistein contents increased while daidzin and genistin contents decreased as the time of enzyme pretreatment of the soy milk increased. After 30 min of pretreatment, daidzin, genistin, daidzein, and genistein contents recovered in tofu products were higher than those of the control. In a pilot-scale process, aliquots (3 L) of soy milk were enzyme-treated for 30 min, aggregated with CaSO4, and hydraulically pressed to remove the whey. As in pretreatments, soy milk daidzein and genistein contents increased while daidzin and genistin contents decreased. In a comparison of the control and enzyme-treated tofu products, the total recoveries of daidzin, genistin, daidzein, and genistein in the tofu products increased from 54.9% to 64.2%. When the tofu products were subjected to a sensory panel test, both products were judged acceptable.     

Inactivation of apple pectin methylesterase induced by dense phase carbon dioxide

The inactivation of apple pectin methylesterase (PME) with dense phase carbon dioxide (DPCD) combined with temperatures (35-55 degrees C) is investigated. DPCD increases the susceptibility of apple PME to the temperatures and the pressures have a noticeable effect on apple PME activity. A labile and stable fraction of apple PME is present and the inactivation kinetics of apple PME by DPCD is adequately described by a two-fraction model. The kinetic rate constants k L and k S of labile and stable fractions are 0.890 and 0.039 min (-1), and the decimal reduction times D L and D S are 2.59 and 58.70 min at 30 MPa and 55 degrees C. Z T representing temperature increase needed for a 90% reduction of the D value and the activation energy E a of the labile fraction at 30 MPa is 22.32 degrees C and 86.88 kJ /mol, its Z P representing pressure increase needed for a 90% reduction of the D value and the activation volume V a at 55 degrees C is 21.75 MPa and -288.38 cm (3)/mol. The residual activity of apple PME after DPCD exhibits no reduction or reactivation for 4 weeks at 4 degrees C.     

Thermal oxidation of 9'-cis-neoxanthin in a model system containing peroxyacetic acid leads to the potent odorant beta-damascenone

The potent odorant beta-damascenone was formed directly from 9'-cis-neoxanthin in a model system by peroxyacetic acid oxidation and two-phase thermal degradation without the involvement of enzymatic activity. Beta-damascenone formation was heavily dependent on pH (optimum at 5.0) and temperature, occurring over the two sequential phases. The first was incubation with peroxyacetic acid at 60 degrees C for 90 min, and the second was at above 90 degrees C for 20 min. Only traces of beta-damascenone were formed on application of only one of the two phases. Formate and citrate solutions produced a much better environment for beta-damascenone formation than acetate and phosphate. About 7 microg/L beta-damascenone was formed from 5.8 mg/L 9'-cis-neoxanthin under optimal experimental condition. The detailed pathway by which beta-damascenone is formed remains to be elucidated.