Dynamical Solidification Characteristic of Metal Surface Alloying by Action of Continuous Laser

The solidification microstructures and their nucleation models are discussed,and the effect of the shape effect of moving melton pool on the solidification features is anslyzed on the basis of experiments. The experimental results show that its solidification behavior is complex,because the continuous laser alloying is a dynamical process. The reason for this complexity is that the dynamical solidification characteristic is significantly controlled by the laser alloying parameters and the molten pool shape. On the other hand,the solidification structures of laser alloying have a series of specialities,and their nucleation mechanisms are mainly heteroepitaxial growth and heterogeneous nucleation growth.     

Conversion of flow pattern in the slender crucible by detached solidification

When the top surface is non-slip solid and the ratio between height and radius of crucible equals 2, the finite-difference method is adopted to carry on three-dimensional numerical simulation on the thermocapillary convection in detached solidification under microgravity. The distributions of velocity and temperature in the melt are obtained as the width of gap in crucible is selected as 0.1, 0.075 and 0.05, respectively. The results show that when the Marangoni number is small, there is one steady toroidal roll cell near the lower free surface, and the flow of melt is steady and weak. With the increase of Marangoni number, the flow is expanded toward the inner part of melt gradually and the velocity of flow on the lower free surface increases. When the Marangoni number exceeds the critical value, the flow of melt becomes unstable.     

Effects of transverse rotating magnetic field on thermocapillary flow under microgravity

Semiconductor melt is electrically conducting, which makes it possible to apply magnetic fields to control the thermocapillary convection induced by surface tension in the floating zone under microgravity, and ultimately to control grown crystal quality. In the present paper, based on the comparison between the transverse static magnetic field and the rotating magnetic field(RMF), we focuses on the effects of RMF on thermocapillary convection. Results indicate that in the RMF, the induced Lorentz force is effective in stirring the melt in the azimuthal direction and suppressing axial convection, and both effects are beneficial for the three-dimensional melt convection returning to a steady axisymmetric flow. The RMF is a promising method for convection control in floating zone for semiconductor crystal growth.     

四川盆地边缘山地与川中丘陵区农村劳动力转移比较研究

四川盆地边缘山地和川中丘陵区是四川省农村劳动力的主要输出地。本研究分别选择沐川县和安岳县作为两区域的样本县,采用与人口规模成比例的分层概率抽样(PPS)方法,按3乡镇/县、3行政村/乡镇、5村民小组以上/行政村的标准抽取调查乡镇、行政村和村民小组,再用间隔法在村民小组内抽取农户(共6乡镇、27村、101村民小组和813户),通过农户问卷和综合分析,从县域和乡镇两个尺度进行两县域农村劳动力转移的比较研究。结果表明：(1)农村劳动力转移仍是川中丘陵区(安岳县)和盆地边缘山地(沐川县)农村劳动力配置的主要方式,但前者农村劳动力转移强度和压力远大于后者。(2)受区位、资源环境、农业结构和非农产业等因素综合作用,在县域尺度上安岳县农村劳动力以省外转移为主,且比以省内转移为主的沐川县转移强度大、女性比重高、转移带来的留守老年/未成年人等社会问题更为突出。(3)资源环境相对一致的安岳县在乡镇尺度上农村劳动力转移主要受社会经济因素影响,乡镇间转移强度、转移劳动力文化程度与女性比例、省外转移比重、就业行业分散程度等均与乡镇对外联系便捷度、经济条件呈正向变动。而资源环境与社会经济分异复杂的沐川县,其乡镇农村劳动力转移受资源环境和社会经济的双重影响,乡镇间转移劳动力的状况与转移强度差异复杂,但乡镇间转移流向和就业领域差异不大,转移带来的社会问题与转移强度呈正向关联。(4)今后应充分认识和重视安岳县所在的川中丘陵区农村劳动力流动及合理配置的难度和问题。同时,要根据自然与社会经济的分异实际,从县域与乡镇两个尺度因地制宜地促进其流动与合理配置：安岳县应将区域流动与就地转化相结合,并着力改善基础设施促进落后乡镇劳动力转移;而沐川县应逐步向就地转化过渡,着力于有条件乡镇就地转化的探索。此外,实施区域产业转型与农村劳动力流动的有效联动是两地的共同选择。     

Thermodynamic Analysis of River Water Fouling on Constant Wall Temperature Tube of Small Diameter

In order to improve utilization of cold and heat source from river, turbulence theory and entropy generation theory were adopted to analyze the effect of fouling on convective heat transfer performance in small diameter tube of constant wall temperature.It is found that the entropy generation caused by conduction of fouling plays a more important role in total entropy generation of heat transfer process through a duct than that in cveast rate of caused by temperature difference.The entropy generation caused by viscous flow is more than the entropy generation caused by temperature difference in flow with bigger Reynolds and small radius.The increase rate of entropy generation monotonically increase with Reynolds and the generation process of fouling resistance.Thereafter, the effect of fouling resistance on the heat transfer performance of water source heat pump heat exchanger should be paid more attention, when river water are used as the cold and heat source of heat pump.     

Study on the Reduction of Thermocapillary Convection of the Single-crystal Growth of Silicon under Microgravity

Float-zone method for growth of semi-conductor silicon is considering very promising under microgravity,but the effect of thermocapillary convection induced by surface tension gradient on the crystal quality is quite highlight.In the present work,a nwe method referred to as surface-cut method is suggested to reduce the melt flow.A mathmatical model to describe the thermocapillary convection in a half float-zone with surface-cut is proposed and numerical simulation for the temperature and the flow field under different surface-cut way is conducted using the finite element method.The results show that the effective reduction can be achieved and the flow will be weaked by 70% by proper increase of the surface-cut time.     

Heat Transfer Characteristics of the Melting Process of the Metal Foam/Paraffin Compound Material

In order to enhance the heat transfer in the phase change heat storage device, a rectangular cavity filled with metal foam / paraffin wax is made. The melting heat storage experiment of foam metal / wax composite phase change material was carried out in the transverse wall temperature conditions. The temperature change curve is drawn according to different heating temperatures. Both the effects of natural convection in rectangular cavity on temperature distribution and the impact of heat transfer temperature difference on the thermal storage time are analyzed. The results show that the melting process of the paraffin in the body cavity is reinforced by the high thermal conductivity of copper foam. The remaining solid paraffin is accelerated to melt by the natural convection of the liquid paraffin formed near the heating surface; and the greater the heat transfer temperature difference is, the greater the natural convection is and the shorter the time for heat storage is.     

激光加工技术在农用汽车中的应用

介绍了激光加工的原理及特点,分析了激光切割、激光焊接、激光表面淬火、激光熔覆、激光合金化、激光无模成型,以及激光打标加工技术在农用汽车工业中的应用。     

Wind Tunnel Tests of Long Span Half - through Arch Bridge Section Model

Wind induced vibration is one of the main control factors in the Long span bridge structure design. The wind tunnel tests for measuring the static wind forces on the bridge girder and the section model wind tunnel dynamic testing for Caiyuanba Yangtze River Bridge in Chongqing are introduced in this paper. The wind tunnel testing for measuring static wind forces and vortex- induced vibration test on the arch are introduced taking account of the influence between two arches. The main contents and outcomes of testing are presented. It is indicated that the bridge girder has excellent wind stability and the arch mechanical characters are rather complicated. The drag force on the hind arch varied a lot because of the font arch interference on the wind flow. The drag force on the hind arch will be negative when two arches are close to each other. It increases with the space of two arches. The results of testing will give the data of buffeting and vortex - induced vibration and flutter analysis of the bridge.     

热流固耦合作用下页岩渗透特性实验

为探讨地温对页岩渗流特性的影响规律,按照温度对页岩作用部位的不同,从流体动能、骨架应变、吸附解吸三个方面,分析甲烷内摩擦力对动能的影响、页岩热应力及热膨胀导致应变、甲烷解吸引起基质收缩随温度变化的规律,得出热流固耦合作用下页岩渗流特性。以渝东南酉阳龙马溪组页岩样品为分析对象,进行页岩型岩的温度渗流实验,提出三方面五因素的分析方法：温度增加,流体内摩擦力增大减小了流动速度;粘土矿物与有机质的差异性膨胀产生热应力,压缩了页岩骨架,加之基质热膨胀减小了基质间隙,双重作用使渗流通道减小;基质收缩效应对孔隙裂隙双重结构介质渗透量影响很小。温度升高对页岩渗流特性的主要影响体现为,内摩擦力的减速作用及热应力和热膨胀对渗流通道的压缩作用。     

Effects of rolling lubrication on flange lateral spread of H-beam

Although rolling lubrication can decrease rolling forces and energy consumption, it also causes defects such as uneven flange lateral spread and web eccentricity during H-beam rolling process. To solve the problem caused by lubrication, finite element models of H-beam universal rolling were established. The different friction conditions of the contact surface between the rollers and work piece were simulated individually. The mechanism of rolling lubrication impacting on flange spread was studied, and the law of flange lateral spread was gained by analyzing the factors such as friction distribution and metal flow in different situations. Analytical results show that lubrication in rolling process can effectively decrease rolling forces and energy consumption. In the condition that technological parameters except friction are fixed, the flange lateral spread decreases in a linear way as the friction coefficient between flange and roller increases, and the flange lateral spread is more sensitive to the friction of flange's the inner side. Design of lubrication process should take full account of the sensitiveness differences of flange lateral spread to the lubrication conditions of different parts of roller surface.     

Simulation of thermocapillary flow in a two dimensional cavity with lattice Boltzmann method

Thermocapillary flow driven by an unbalanced surface tension plays the most important role for mass and heat transport in floating zone melt crystal growth under microgravity. The authors develop both a serial and a parallel codes with lattice Bhatnagar-Gross-Krook(BGK) model using two distribution functions, and numerically study the thermocapillary flow in a two dimensional square cavity with a single free surface under microgravity condition. The serial code is developed by combining collision and propagation step, using a temporary array to continuously read distribution functions, and its performance is improved two times faster than the code with separating the collision and propagation step. The MPI parallel code is proposed utilizing one dimensional partitioning and non-blocking communication. The accurate and reliable results are achieved with both the serial and parallel codes by comparing with CFD results simulated by the finite volume method; the MPI parallel code has high performance.     

不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。     

高大平房仓粮面施药自然渗透熏蒸试验

对高大平房仓磷化铝粮面投药后磷化氢自然扩散渗透情况进行检测,并对熏蒸杀虫效果进行了试验,检测分析了不同仓房不同温度和同一仓房不同温度下磷化氢的扩散速度和分布规律.试验结果表明:高大平房仓由于粮堆内外温差的存在,粮面施药后磷化氢气体在相对比较短的时间内借助粮堆内的微气流扩散到粮堆的各层,并能分布均匀,而且粮堆内温差越大,磷化氢气体扩散速度越快,气体分布达到均匀的时间越短.     

Dynamic analysis on ferromagnetic particles of magnetorheological fluids

Based on the theory of magnetic dipole, this paper analyzes the forces and moments applied on the particles and established the corresponding equations of motion. It compares these forces respectively in order to reduce the computation time in the numerical simulation. It is found that magnetic force, viscous force and repelling force are stronger than other forces, and translation is the main motion. Therefore the governing equation in the numerical simulation can be simplified. The validity of above dynamic analysis is verified by numerical simulation on the microstructure of magnetorheological fluids.     

Development and experiments of direct resistance heating in hot forging

A new hot-forging method by means of direct resistance heating is investigated aiming at the long produce time and large energy consumption of traditional hot forging. The hot upsetting experiments with cylindrical billet of 42CrMo4 are performed. The influences of initial contact force, surface quality of the billet and current intensity on the heating temperature are researched. The results of the experiments show that the billet can be heated quickly to forming temperature by the approach. The relatively low initial contact force is useful to increase the heating temperature. The heating temperature is proportional to the square of the current intensity, and the heating temperature is seriously affected by the surface quality. During the forming process the billet cooling rate is effectively decreased and the forming time is extended in relation to the resistance heating.     

Face Stability Analysis of Shield Tunneling in Sandy Cobble Stratum

When shield crossed the sandy cobble stratum in Chengdu metro line 1, ground subsidence reached as high as dozens of times. The losing stability of excavation face caused excessive ground loss. Conditions of engineering geology and hydrogeology about sandy cobble stratum in Chengdu were analyzed. Mechanical characteristics of sandy cobble were obtained via large-scale triaxial test. According to the low cohesion and heavily discrete characteristics of sandy cobble, numerical computation was conducted by discrete element method. Based on numerical simulation of the large scale triaxial test, the micro parameters of the sandy cobble were calibrated. The influence of support pressure on shield excavation face deformation, surface settlement, max horizontal displacement and stress of soil was analyzed. The results show that: 1) Collapse pattern of excavation face by numerical simulation coincides with result of centrifuge model test in sand. 2) When supporting pressure is small, contact forces of particle in front of excavation face is low. The tendency of particle flow is apparent. Since over-excavation is easily brought out, cavity in the ground is caused after shield tunneling. 3)Soil arching effect in shield construction is obvious. Shield excavation forms cavity in deep ground and obvious earth surface collapse is not observed. This is main reason for lagged settlement phenomena of shield tunneling in Chengdu.     

Numerical simulation and optimization of flow and temperature fields for wide slab cast mold

Fluid flow and temperature distribution in a wide slab continuous caster mold are simulated using the commercial software FLUENT. The research results show that the longitudinal cracks in the wide slab surface with an original submerged entry nozzle (SEN) mainly are caused by weak upper flow circulation in the mold, slow heat exchange near the meniscus, and non uniform melting of the mold powder. Therefore, a modified SEN with smaller outlet thickness, a 15° downward port angle, and convex bottom is designed to overcome the disadvantages of the original nozzle. The characteristics of the molten steel flow are analyzed by numerical simulation. The results indicate that the parameters of the optimum SEN are more highly optimized than the original SEN. The trial results also show that the optimum SEN possesses a better application effect.     

Recent Advances in Synthesizing Single-walled Carbon Nanotubes

The main synthesis of single-walled carbon nanotubes (SWCNTS) on a large scale and in higher purity is investigated. To analyse the characteristic of different synthesis and the major parameters whose variety influence the product. The kinds and ratio of carbon source and catalyst influence the preparation of SWCNTS obviously.The factors such as current and voltage,the kind of inert gases and pressure and the cooling rate of electrodes play important roles in synthesis of SWCNTS by arc discharges. The intensity of laser bean,environmental temperature,the kind and the velocity of flow of catalyst and the frequency and interval of impulse act important parts in SWCNTS produced by laser evaporation. The flow rate of carbon resource, the grain sizes of catalyst,reaction temperature,the gases pressure and flux and matrix materials etc play key parts in SWCNTS synthesized by chemical vapor deposition.     

Axial Force Stiffness Interaction in Seismic Analysis of RC Double Column Bridges

Earthquake induced dynamic axial force in reinforced concrete (RC) bridge bent columns will not only change the yield strength of the columns but also change their stiffness, which is seldom considered by the common lumped plasticity line model. Based on the fiber element model results that taking into account the influence of dynamic axial force on strength and stiffness simultaneously, the axial force stiffness interaction effect on the seismic responses of RC double column bridges was analyzed. The results show that, axial force stiffness interaction has a large effect on the seismic responses of the double column bridge in the elastic range, and it does not alter the ultimate capacity of the columns. Since the stiffness of the columns under compression and tension dynamic axial forces offset each other, the global displacement of bridge bent with equal columns is relatively unaffected by the axial force stiffness interaction, however, the differences of the column member forces are manifest. For the short column controls the global stiffness, the axial force stiffness interaction has significant influences on both the global displacement and member force responses. The influences become larger as the irregularity of the bridge bent increases, so the interaction between axial force and member stiffness should be sufficiently considered in seismic analyses.