Application of activable tracers to investigate radial movement of minerals in the stem of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

Two activable tracers, Rb and Eu, were injected into the sapwood of Japanese cedars (Cryptomeria japonica D. Don) to investigate the radial movement of minerals in their stems in the resting period. Eight trees of four cultivars, two of which genetically form wet heartwood, were treated near the end of the growing period. At 40 days after the treatment, Rb was detected in the outer heartwood, whereas Eu was not. Radial movement of Rb was more rapid in trees with wet heartwood than in those with normal heartwood. At 204 days after the treatment, more Rb was detected in the heartwood than was found on the first sampling, whereas no Eu was detected in the heartwood. The difference in radial movement between Rb and Eu was considered mainly to be the result of selective transport of beneficial minerals by Japanese cedar. The difference in the rate of radial movement of Rb between wet and normal heartwood became more conspicuous at 204 days after treatment. We concluded that the movement of Rb from the sapwood to the outer heartwood was by active transport through the rays, whereas that in the heartwood was by diffusion due to the gradient of Rb concentration.     

Wood colour variation in sapwood and heartwood of young trees of Tectona grandis and its relationship with plantation characteristics, site, and decay resistance

? Wood colour of Tectona grandis produced from fast-growth plantations is highly variable and the causes of this variation are relatively unknown.

? With the purpose of understanding the colour variation, different fast-growth plantations were sampled with different growth rates, tree ages, and sites.

? Wood colour was measured with a CIELab system, where three variables are estimated: coordinate L* for lightness, coordinate a* defines redness and coordinate b* defines yellowness.

? Results showed only a negative correlation between L* and a*. L* and a* were negatively and positively respectively correlated with pith distance in heartwood, but not for b*. No correlations were found between L* and b* in sapwood and plantation characteristics, while a* was positively correlated with age and height of tree and growth rate. In heartwood, tree age and diameter at breast height were correlated with all colour parameters, but tree height and plantation density were correlated with a* and b*. Cluster site had correlation with L*. Multiple correlation analysis showed that the heartwood is increasing darker (L*) and redder (a*) when the trees are older and bigger. Correlation coefficient shown that sapwood and heartwood with lighter colour (L*) is less resistance to fungal attack, but redness colour (a*) increasing decay resistance.

     

Cesium absorption through bark of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

Absorption of radiocesium (¹³⁷Cs and ¹³⁴Cs) through bark, and its subsequent translocation into wood and needles, has been suggested as a potential source of tree contamination, but the process is not well understood. Field experiments were conducted to confirm whether Cs could enter a Japanese cedar tree through the bark and how Cs moves within a tree. Stable Cs (¹³³Cs) was applied to the bark at 1.2-m height on 10- and 26-year-old Japanese cedars. The ¹³³Cs concentrations were determined in the bark, sapwood, and heartwood (for 26-year-old cedar only) of stem disks from several heights, as well as in current-year needles from the canopy. The ¹³³Cs concentrations were considerably higher in the sapwood and heartwood of stem disks from 1.2-m height in treated trees than in untreated trees, suggesting that ¹³³Cs penetrated the bark to enter the wood. The average ¹³³Cs concentrations were higher in the heartwood than the sapwood, indicating ¹³³Cs accumulation in the heartwood. High ¹³³Cs concentrations in the needles of treated trees implied acropetal movement of ¹³³Cs to actively growing organs. Our results demonstrate that Cs can enter Japanese cedar trees through the bark and that Cs is transported radially to the heartwood and vertically to the apex.     

Heartwood, sapwood and bark content of teak trees grown in Karnataka, India

We evaluated heartwood, sapwood and bark content in teak trees. A total of 27 sample plots were laid out in teak plantations raised by State Forest Department in Karnataka covering different age groups...     

Family effects in heartwood content of Eucalyptus globulus L.

Thirty families of Eucalyptus globulus L., established in a first-generation open-pollinated progeny test, were evaluated for the production of heartwood. Five trees of each family were harvested at 9 years of age, total tree height was measured and a cross-sectional disc was removed at 25 % stem height to estimate the amount of heartwood. The heartwood proportion of the stemwood cross-sectional area averaged 41 % with significant between-family variation (P = 0.016) ranging from 27 to 53 %. There were also important within-family differences with coefficients of variation of the mean between 4 and 48 %. Moderate heritability values were obtained for heartwood diameter and proportion (h ² = 0.31 and 0.23, respectively) but low estimates were found for sapwood width (h ² = 0.17). Strong positive genetic and phenotypic correlations of heartwood diameter were found with stem DBH and with heartwood proportion. Both correlation estimates indicated that larger trees tended to have more heartwood. The results indicate that there is an opportunity to reduce heartwood content in E. globulus through selection and breeding.     

Radial distribution patterns of the green moisture content in trunks of 46-year-old red cypress (<Emphasis Type="Italic">Chamaecyparis formosensis</Emphasis>)

Understanding the green moisture content and wood density is important for effective forest management. Radial distribution patterns in the green moisture content (MC) and basic density (BD) in stems of red cypress (Chamaecyparis formosensis) were investigated in 69 plantation trees that were 46 years old. An increment core was collected from each sample tree at breast height (1.3 m). Five radial positions were defined: pith piece (Pith), inner heartwood (IHW), outer heartwood (OHW), intermediate wood (TSH), and sapwood (SW). Results showed that the average MC was highly dependent on the individual tree. Average values of the MC obtained from the TSH were significantly lower than those for the other positions. The MC of heartwood was higher than that of SW. Distribution patterns of the MC in the radial direction varied among trees. Radial variations in MC and BD were greater than in between-tree variations. Six types of radial distribution patterns of MC were detected for sample trees. MC values increased with decreasing BD (except for the TSH). Positive correlations were found between adjacent sampling positions in both MC and BD.     

Near-infrared spectroscopy for the quantification of linseed oil uptake in Scots pine (Pinus sylvestris L.)

Abstract

Eighteen sapwood and 18 heartwood samples from three Scots pine (Pinus sylvestris L.) trees were used to identify correlations between the features of their near-infrared spectra (400–2500 nm) measured before and after impregnation with linseed oil (Linogard^®) and (1) the amount of oil taken up by the samples at three different longitudinal positions; and (2) the tissue type of sample. Calibration models were cross-validated and oil uptake models were also validated on separate test sets. Partial least squares regression models for the prediction of uptake and tissue type in non-impregnated wood were promisingly accurate, having coefficients of multiple determination (Q ²) values of > 0.8, 0.8 and 0.75 for predictions of tissue type, oil taken up as a percentage of sample mass and total mass of oil taken up, respectively. The models developed for linseed oil-impregnated samples were better still, generating Q ² values of > 0.9, > 0.8 and 0.8 for the three key properties. In general, models based on spectra acquired along two directions of measurement (longitudinal and tangential) were more accurate than models based on only one. Tandem models consisting of two submodels, one for sapwood and one for heartwood, were more successful than single models applicable to both tissue types.     

Relationship between <Superscript>137</Superscript>Cs concentration and potassium content in stem wood of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

To utilize forest resources in areas affected by fallout from the Fukushima Daiichi Nuclear Power Plant accident, it is important to understand the mechanisms of ¹³⁷Cs movement through the stem wood of contaminated trees. Understanding the mechanism of absorption and migration of ¹³⁷Cs to stem wood is necessary for clues to the future prediction of the transition of ¹³⁷Cs to xylem. In the present study, radial variations in ¹³⁷Cs concentration were investigated in Japanese cedar (Cryptomeria japonica D. Don) trees collected 1 year and 10 months after the accident. Additionally, the relationship between ¹³⁷Cs concentration and potassium (K) content was established. Trees with a higher moisture content and lower lightness value in heartwood tended to have a higher ¹³⁷Cs concentration in the heartwood. In these trees, ¹³⁷Cs concentration peaked at the heartwood–sapwood boundary and gradually decreased toward the pith. By contrast, K content within the heartwood remained nearly constant along the radial direction. The heartwood-to-sapwood ratio of ¹³⁷Cs concentration was significantly positively correlated with that of K content. Based on these results, we suggest that ¹³⁷Cs movement from sapwood to heartwood might be related to the K content ratio of heartwood and sapwood.     

Improvement of penetrability of sugi wood by impregnation of bacteria using sap-flow method

The sap flow method of wood impregnation was conducted to aid the movement of bacteria through the living tree, thereby accelerating their distribution through wood within a short time. When log-pond water containing mixed species of bacteria were introduced in the living trees by butt-end dipping and then laid horizontally for 6 months, bacteria could be delivered by sap flow vertically through the sapwood tracheids up to the high portions from the butt-end of trees; they could be detected in the ray parenchymal cells. The sap-flow method was assumed to deliver the bacteria to sapwood and heartwood at high levels of standing sugi (Cryptomeria japonica D. Don) trees. Degradation of the pit membranes was observed even at more than 3 m upward from the butt-end after the treatment in sapwood, as well as around the butt-end of the trees. The uptake of the aqueous dye solutions in sapwood of the treated logs were about eight times more than those of control specimens after 8h.Part of this report was presented at the 40^th annual meeting of the Japan Wood Research Society, Tsukuba, April 1990; the 41^st annual meeting of Japan Wood Research Society, Matsue, April 1991; and the IUFRO 4^th international conference on wood drying, Rotorua, New Zealand, August 1994     

Radial distribution of quinones in plantation teak (Tectona grandis L.f.)

? Quinones are primarily responsible for the natural durability of teak.

? The previous paper in this series reported on the natural termite resistance of teak trees of different ages (8-, 30- and 51-year-old trees). In this study, the radial distribution of quinones (tectoquinone, lapachol, desoxylapachol and its isomer) and other components in the ethanol-benzene (1:2) extract were measured by means of gas chromatography.

? Significant differences in desoxylapachol or its isomer content were found among the outer heartwood of 8-, 30- and 51-year old trees, as well as between the inner and outer parts of the heartwood.

? All toxic quinone contents were positively correlated with the total extractive content. The highest correlation degree was measured in the isodesoxylapachol content.

? Although linearly related, only modest correlations were observed between the natural termite resistance parameters and the content of tectoquinone and isodesoxylapachol.

     

Effects of heartwood extractive fractions of Thuja plicata and Chamaecyparis nootkatensis on wood degradation by termites or fungi

The effect of selective removal of extractives on termite or decay resistance was assessed with matched samples of Thuja plicata Donn ex D. Don and Chamaecyparis nootkatensis (D.Don) Spach heartwood. Samples were extracted using a variety of solvents and then exposed to the subterranean termite Coptotermes formosanus Shiraki in a no-choice feeding test or to the brown-rot fungus Postia placenta (Fr.) M. Larsen & Lombard in a soil bottle test. At the same time, the effect of naturally occurring variations in heartwood extractives on termite or decay resistance was evaluated by testing samples from the inner and outer heartwood of five trees of each species against C. formosanus and P. placenta and analyzing matched wood samples for their extractive content. The results suggest that the methanol-soluble extractives in T. plicata and C. nootkatensis play an important role in heartwood resistance to attack by C. formosanus and P. placenta. Total methanol-soluble extractive content of the heartwood was positively correlated with both termite and decay resistance; however, there was much unexplained variation and levels of individual extractive components were only weakly correlated with one another. Further studies are under way to develop a better understanding of the relationships between individual extractive levels and performance.     

The influence of heartwood on the pulping properties of Acacia melanoxylon wood

The pulping wood quality of Acacia melanoxylon was evaluated in relation to the presence of heartwood. The sapwood and heartwood from 20 trees from four sites in Portugal were evaluated separately at 5% stem height level in terms of chemical composition and kraft pulping aptitude. Heartwood had more extractives than sapwood ranging from 7.4% to 9.5% and from 4.0% to 4.2%, respectively, and with a heartwood-to-sapwood ratio for extractives ranging from 1.9 to 2.3. The major component of heartwood extractives was made up of ethanol-soluble compounds (70% of total extractives). Lignin content was similar in sapwood and heartwood (21.5% and 20.7%, respectively) as well as the sugar composition. Site did not influence the chemical composition. Pulping heartwood differed from sapwood in chemical and optical terms: lower values of pulp yield (53% vs 56% respectively), higher kappa number (11 vs. 7), and lower brightness (28% vs 49%). Acacia melanoxylon wood showed an overall good pulping aptitude, but the presence of heartwood should be taken into account because it decreases the raw-material quality for pulping. Heartwood content should therefore be considered as a quality variable when using A. melanoxylon wood in pulp industries     

Natural durability of Douglas fir (Pseudotsuga menziesii [Mirb.] Franco) heartwood grown in southern Germany

Abstract

The natural durability of timber is an important property in order to assess its performance in service. For numerous species grown in primary forests, this property has already been determined. As plantation-grown timber becomes more and more important, detailed information on its properties is needed, because increasing amounts of this material are coming to the market. The majority of planted Douglas fir (Pseudotsuga menziesii [Mirb.] Franco) in Germany is around 40 years old. In the present study, representative material of totally ten trees from two different sites in the south of Germany was investigated with regard to natural durability. In laboratory tests based on European standard DIN EN 350-1, inner and outer heartwood zones were exposed to basidiomycetes. Density measurements were additionally used for further characterisation of this material. Results showed a lower durability of the plantation-grown Douglas fir wood as compared with wood from natural sites. Significant differences for both durability and density were found between inner and outer heartwood, even though no correlation between the parameters was recognised. Data illustrate that for a better understanding of durability variations, chemical, topochemical and electron microscopic studies are needed.     

Dependence of colour and discolouration on total extractive content of African Padauk and Jatoba

This study is about relationships between total extractive contents, heartwood colour and light-induced discolourations of the tropical species African Padauk (Pterocarpus soyauxii Taub) and Jatoba (Hymenaea courbaril L.). Wood surface colour was measured spectrophotometrically before and after light irradiation. Subsequently, the total extractive content was determined and linked to the colour parameters. Total extractive content varied between 6 % (Jatoba) and 27 % (African Padauk). The fact that non-irradiated Jatoba appeared lighter and more yellow with higher extractives contents, opposed the often assumed relationship that more heartwood extractives cause darker wood. For light-irradiated Jatoba wood only the reddishness was more intense when samples had higher extractive content. In contrast, light-irradiated African Padauk showed significant differences in all colour parameters as extractives varied. High overall colour change in African Padauk due to light irradiation was observed; however, no relationship with the extractive content existed. In contrast, discolouration rate of Jatoba wood strongly varied with its extractive content. Individual wood species react differently during exposure to light and therefore require specific surface treatment to maintain the desired colour appearance and colour stability.     

Genetic control of wood colour, density and heartwood ellagitannin concentration in European oak (Quercus petraea and Q. robur)

Pressler cores of young clones of Quercus petraea and Q. roburwere analysed from two sites in Germany. Variation of wood colour(defined by the CIELAB system), density and heartwood ellagitanninswas examined between clones, species and sites. Similar studieswere made of cores from another trial of 20 half-sib familiesof parent trees deriving from five German forests. The resultsfrom both the clonal and progeny trials indicate that heartwoodellagitannin content and wood density are under strong geneticcontrol, while sapwood and heartwood colour are less so. A largeproportion of between-clone variation in wood density and ellagitanninlevels occurred between the two species, while these propertiesvaried little among ramets of the same clone grown on two contrastingsites, despite a difference in growth rates. A large proportionof the total variation among progeny was attributed to forestorigins and could not be attributed clearly to either geneticor environmental causes because of limitations of the samplingdesign     

Characterization of Douglas-fir grown in Portugal: heartwood,sapwood, bark,ring width and taper

Douglas-fir (Pseudotsuga menziesii) is one of the best timber conifers providing long sawnwood components. Original from North America, it has been planted in Europe on approximately 550 thousand ha. Twenty Douglas-fir trees growing in two sites in Portugal were studied regarding ring analysis, heartwood, sapwood and bark development, and taper. The radial growth rate was 7.1 and 6.6 mm year⁻¹ at stem base for 45- and 50-year-old trees, respectively, in the two sites. Initial growth rate was slower, increasing until about 20 years and decreasing afterwards. Heartwood proportion represented on average 49% of the cross section in the lower part of the stem and decreased upwards. Heartwood formation was estimated to start at a cambial age of 8–9 years and increasing by 0.7–0.9 rings year⁻¹. Sapwood width was on average 75 mm at stem base, decreasing upwards. Bark was 26–27 mm thick at stem base, where it represented 15% of the cross-sectional area and decreased to 3–5 mm at the top. Stemwood and heartwood tapers were on average 15 mm m⁻¹ in the lower stem part and 21 and 18 mm m⁻¹, respectively, in the upper part. Douglas-fir showed a good potential for the mountain areas of Portugal, and under the silvicultural conditions of both stands the trees presented ring homogeneity, small conicity and low taper suitable for long wood components.

     

Wood properties of juvenile and mature heartwood in Robinia pseudoacacia L.

The aim of this study is to characterise the properties of juvenile and mature heartwood of black locust (Robinia pseudoacacia L.). Content, composition and the subcellular distribution of heartwood extractives were studied in 14 old-growth trees from forest sites in Germany and Hungary as well as in 16 younger trees of four clone types. Heartwood extractives (methanol and acetone extraction) were analysed by HPLC-chromatography. UV microspectrophotometry was used to topochemically localise the extractives in the cell walls. The natural durability of the juvenile and mature heartwood was analysed according to the European standard EN 350-1. Growth as well as chemical analyses showed that, based on extractives content, the formation of juvenile wood in black locust is restricted to the first 10–20 years of cambial growth. In mature heartwood, high contents of phenolic compounds and flavonoids were present, localised in high concentrations in the cell walls and cell lumen of axial parenchyma and vessels. In juvenile wood, the content of these extractives is significantly lower. Juvenile wood had a correspondingly lower resistance to decay by Coniophora puteana (brown rot fungus) and Coriolus versicolor (white rot fungus) than mature heartwood.     

Increasing wood production through old age in tall trees

How long forest trees can sustain wood production with increasing age remains an open question, primarily because whole-crown structure and growth cannot be readily measured from the ground or on felled trees. We climbed and directly measured crown structures and growth rates of 43 un-suppressed individuals (site trees) of the two tallest species – Eucalyptus regnans and Sequoia sempervirens – representing a wide range of tree sizes and ages. In both species, ground-level measurements of annual growth, including height, ring width, and basal area increment, exhibited the oft-reported trend of decreasing growth (or no change in growth) with age, yet wood production of the entire main trunk and whole crown both increased with size and age up to and including the largest and oldest trees we measured. The balance between structural metrics of whole-crown respiratory demands (cambium area, inner bark volume, sapwood volume, and heartwood deposition area) and photosynthetic capacity (leaf area and green bark area) was statistically independent of size but not age. After accounting for the effect of size, trees with lower potential respiratory demands grew more than trees with higher potential respiratory demands per unit photosynthetic area. The strongest determinant of tree energy balance was the ratio of aboveground cambium area to leaf area. Among the site trees we examined, over 85% of the variation in annual wood production was explained by variation in size, and the proportion of total aboveground wood production in appendages (branches, limbs, and reiterated trunks) increased linearly with size. With increasing age in both species, the proportion of annual wood production converted to heartwood increased in main trunks and appendages. The oldest tree we measured produced more heartwood in its main trunk over 651 years (351 m³) than contained in any tree we measured <1500 years old. The two tallest tree species achieve similar stature despite divergent growth dynamics and ecologies. At one extreme, E. regnans attains great size quickly but dies relatively young because trees are susceptible to fire and fungi. At the other extreme, S. sempervirens attains great size more slowly but has a long lifespan because trees resist fire and prioritize investment in decay-resistant heartwood. Increasing wood production as trees age is a mechanism underlying the maintenance of biomass accumulation during forest development and the carbon-sink capacity of old-growth forests.     

Variation of heartwood phenolics and oak lactones between the species and phenological types of Quercus petraea and Q. robur

Pressler cores were taken of Quercus petraea and Q. robur treesfrom young German provenance stands and mature mixed plantationsin England. The concentration of total phenolics extracted fromthe outer heartwood was measured and significant differencesfound between the two species. Concentrations of oak lactones,measured from provenance samples, also varied significantlybetween the species. However, the difference in total phenolicsbetween species was much lower among the trees from the mixedplantations than from the provenance trials. Q. petraea wascharacterized by lower levels of total phenolics but greaterconcentrations of oak lactones than Q. robur. A comparison betweenlate and early flushing Q. petraea trees found no significantdifference in total phenolics between these phenological types.     

广西融水特色红心杉木优树材质性状变异规律研究

[目的]通过测定和分析广西融水种源红心杉木优树材质性状指标,以了解该地区红心杉木材性状变异规律。[方法]以广西融水种源60株20年生的红心杉木优树为研究材料,测定单株材积、红心率、基本密度、组织比量、管胞性状、微纤丝角等10个材质性状指标,分析各材性性状指标分布和变异规律及性状间的相关关系。[结果]表明:红心率、基本密度、木射线比量、管胞比量、管胞长、管胞宽、管胞长宽比等性状数据分布服从正态分布。融水两个地区红心杉优树轴向薄壁细胞比量的变异系数分别为35.08%和44.97%,变异较大。管胞比量变异系数分别为3.28%和3.56%,变异较小。红心率、木射线比量、管胞长、管胞宽、微纤丝角等性状差异极显著(P0.01),轴向薄壁细胞比量差异显著(P0.05)。10个材质性状间存在12对表型显著相关。[结论]测定的10个性状均是连续性数量性状。早、晚材的管胞长度、管胞宽度和管胞长宽比等性状数据呈从心材至边材逐渐增加的规律。作为重要经济性状的红心率与木射线比量呈极显著正相关(P0.01),单株材积与轴向薄壁细胞比量呈显著正相关(P0.05),而单株材积与基本密度的相关性不显著,这使红心杉木生长量与材性相结合的遗传改良成为可能。